Layer by layer electroless deposition: An efficient route for preparing adhesion-enhanced metallic coatings on plastic surfaces

Chemical Engineering Journal

Volumn 303, Issue , 2016, Pages 100-108

  Chen, Dexin ^a   Zhang, Yang ^a   Bessho, Takeshi ^b   Sang, Jing ^c   Hirahara, Hidetoshi ^c   Mori, Kunio ^c,d   Kang, Zhixin ^a  

^a SOUTH CHINA UNIVERSITY OF TECHNOLOGY   (China)

^b TOYOTA MOTOR CORPORATION   (Japan)

^c IWATE UNIVERSITY   (Japan)

^d Sulfur Chemical Institute   (Japan)

Author keywords

Adhesion enhanced; Chemical covalent bonding; Layer by layer electroless deposition; Metallic coatings

Indexed keywords

ADHESION; ATOMIC FORCE MICROSCOPY; CHEMICAL BONDS; COATINGS; COPPER; DEPOSITION; ENERGY DISPERSIVE SPECTROSCOPY; FILMS; INTERFACES (MATERIALS); METAL COATINGS; METALS; POLYMER FILMS; POLYMERS; SCANNING ELECTRON MICROSCOPY; SILVER; X RAY PHOTOELECTRON SPECTROSCOPY; X RAY SPECTROSCOPY;

COMPONENT STRUCTURE; COVALENT BONDING; ENERGY DISPERSIVE X RAY SPECTROSCOPY; FORMATION MECHANISM; LAYER BY LAYER; METALLIC COATING; POLYMERIC SUBSTRATE; SURFACE METALLIZATION;

PLASTIC COATINGS;

EID: 84973326594     PISSN: 13858947     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cej.2016.05.114     Document Type: Article

References (35)

1. Iqbal S., Zhang Y., Liu Y., Akram R., Lv S. Polymer micelles as building blocks for layer-by-layer assembly of multilayers under a high-gravity field. Chem. Eng. J. 2016, 293:302-310.
2. Chang S., Slopek R.P., Condon B., Grunlan J.C. Surface coating for flame-retardant behavior of cotton fabric using a continuous layer-by-layer process. Ind. Eng. Chem. Res. 2014, 53:3805-3812.
3. Richardson J.J., Bjornmalm M., Caruso F. Technology-driven layer-by-layer assembly of nanofilms. Science 2015, 348(aaa249):1.
4. Zhang D., Tong J., Xia B. Humidity-sensing properties of chemically reduced graphene oxide/polymer nanocomposite film sensor based on layer-by-layer nano self-assembly. Sens. Actuators, B 2014, 197:66-72.
5. 2 nanoparticle thin films. Biomaterials 2006, 27:4296-4303.
6. Zhai L., Cebeci F.C., Cohen R.E., Rubner M.F. Stable superhydrophobic coatings from polyelectrolyte multilayers. Nano Lett. 2004, 4:1349-1353.
7. Priolo M.A., Holder K.M., Guin T., Grunlan J.C. Recent advances in gas barrier thin films via layer-by-layer assembly of polymers and platelets. Macromol. Rapid Commun. 2015, 36:866-879.
8. Alongi J., Carosio F., Malucelli G. Current emerging techniques to impart flame retardancy to fabrics: an overview. Polym. Degrad. Stabil. 2014, 106:138-149.
9. Kim S.S., Kim Y.R., Chung T.D., Sohn B.H. Tunable decoration of reduced graphene oxide with au nanoparticles for the oxygen reduction reaction. Adv. Funct. Mater. 2014, 24:2764-2771.
10. Izquierdo A., Ono S.S., Voegel J.C., Schaaf P., Decher G. Dipping versus spraying: exploring the deposition conditions for speeding up layer-by-layer assembly. Langmuir 2005, 21:7558-7567.
11. Schlenoff J.B., Dubas S.T., Farhat T. Sprayed polyelectrolyte multilayers. Langmuir 2000, 16:9968-9969.
12. Cranston E.D., Gray D.G. Birefringence in spin-coated films containing cellulose nanocrystals. Colloid. Surf. A 2008, 325:44-51.
13. Xiang F., Givens T.M., Grunlan J.C. Fast spray deposition of super gas barrier polyelectrolyte multilayer thin films. Ind. Eng. Chem. Res. 2015, 54:5254-5260.
14. Dierendonck M., De Koker S., De Rycke R., De Geest B.G. Just spray it-LBL assembly enters a new age. Soft Matter 2014, 10:804-807.
15. Carosio F., Alongi J. Ultra-fast layer-by-layer approach for depositing flame retardant coatings on flexible PU foams within seconds. ACS Appl. Mater. Interfaces 2016, 8:6315-6319.
16. Schaaf P., Voegel J., Jierry L., Boulmedais F. Spray-assisted polyelectrolyte multilayer buildup: from step-by-step to single-step polyelectrolyte film constructions. Adv. Mater. 2012, 24:1001-1016.
17. Krogman K.C., Zacharia N.S., Schroeder S., Hammond P.T. Automated process for improved uniformity and versatility of layer-by-layer deposition. Langmuir 2007, 23:3137-3141.
18. Carosio F., Di Blasio A., Cuttica F., Alongi J., Frache A., Malucelli G. Flame retardancy of polyester fabrics treated by spray-assisted layer-by-layer silica architectures. Ind. Eng. Chem. Res. 2013, 52:9544-9550.
19. Alongi J., Carosio F., Frache A., Malucelli G. Layer by layer coatings assembled through dipping, vertical or horizontal spray for cotton flame retardancy. Carbohyd. Polym. 2013, 92:114-119.
20. Zhou Q., Zhong K., Fu W., Huang Q., Wang Z., Nie B. Nanostructured platinum catalyst coating on diesel particulate filter with a low-cost electroless deposition approach. Chem. Eng. J. 2015, 270:320-326.
21. Langner M., Agarwal S., Baudler A., Schröder U., Greiner A. Large multipurpose exceptionally conductive polymer sponges obtained by efficient wet-chemical metallization. Adv. Funct. Mater. 2015, 25:6182-6188.
22. Garcia A., Berthelot T., Viel P., Mesnage A., Jegou P., Nekelson F., Roussel S., Palacin S. ABS polymer electroless plating through a one-step poly(acrylic acid) covalent grafting. ACS Appl. Mater. Interfaces 2010, 2:1177-1183.
23. Bhagabati P., Chaki T.K., Khastgir D. One-Step in situ modification of halloysite nanotubes: Augmentation in polymer-filler interface adhesion in nanocomposites. Ind. Eng. Chem. Res. 2015, 54:6698-6712.
24. Chen D., Zhang Y., Bessho T., Kudo T., Sang J., Hirahara H., Mori K., Kang Z. Formation of reflective and conductive silver film on abs surface via covalent grafting and solution spray. Appl. Surf. Sci. 2015, 349:503-509.
25. Agina E.V., Sizov A.S., Yablokov M.Y., Borshchev O.V., Bessonov A.A., Kirikova M.N., Bailey M.J.A., Ponomarenko S.A. Polymer surface engineering for efficient printing of highly conductive metal nanoparticle inks. ACS Appl. Mater. Interfaces 2015, 7:11755-11764.
26. Lee C., Chen C., Chen C. Graphene nanosheets as ink particles for inkjet printing on flexible board. Chem. Eng. J. 2013, 230:296-302.
27. Kang Z., Mori K., Oishi Y. Surface modification of magnesium alloys using triazine dithiols. Surf. Coat. Technol. 2005, 195:162-167.
28. K. Mori, Y. Matsuno, K. Mori, T. Kudo, S. Michiwaki, M. Miyawaki, Process for forming metal film, and product equipped with metal film, US Patent, 8753748.
29. Peng Z., Yang H. Designer platinum nanoparticles: control of shape, composition in alloy, nanostructure and electrocatalytic property. Nano Today 2009, 4:143-164.
30. Priya R., Baiju K.V., Shukla S., Biju S., Reddy M.L.P., Patil K., Warrier K.G.K. Comparing ultraviolet and chemical reduction techniques for enhancing photocatalytic activity of silver oxide/silver deposited nanocrystalline anatase titania. J. Phys. Chem. C 2009, 113:6243-6255.
31. 2 under solar-light irradiation with XPS, solid-state nmr, and DFT calculations. J. Am. Chem. Soc. 2013, 135:1607-1616.
32. Battocchio C., Meneghini C., Fratoddi I., Venditti I., Russo M.V., Aquilanti G., Maurizio C., Bondino F., Matassa R., Rossi M., Mobilio S., Polzonetti G. Silver nanoparticles stabilized with thiols: a close look at the local chemistry and chemical structure. J. Phys. Chem. C 2012, 116:19571-19578.
33. Venezia A.M. X-ray photoelectron spectroscopy (XPS) for catalysts characterization. Catal. Today 2003, 77:359-370.
34. Tougaard S. Quantitative analysis of the inelastic background in surface electron spectroscopy. Surf. Interface Anal. 1988, 11:453-472.
35. 4 colloid. Langmuir 2013, 29:5968-5973.