High-performance flexible energy storage and harvesting system for wearable electronics

Scientific Reports

Volumn 6, Issue , 2016, Pages

  Ostfeld, Aminy E ^a   Gaikwad, Abhinav M ^a   Khan, Yasser ^a   Arias, Ana C ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COBALT; GRAPHITE; LITHIUM COBALT OXIDE; OXIDE;

DEVICES; ELECTRONIC DEVICE; EQUIPMENT DESIGN; PHYSIOLOGIC MONITORING; POWER SUPPLY; SOLAR ENERGY;

COBALT; ELECTRIC POWER SUPPLIES; EQUIPMENT DESIGN; GRAPHITE; MONITORING, PHYSIOLOGIC; OXIDES; SOLAR ENERGY; WEARABLE ELECTRONIC DEVICES;

EID: 84969132722     PISSN: None     EISSN: 20452322     Source Type: Journal    
DOI: 10.1038/srep26122     Document Type: Article

References (53)

1. Nathan, A. et al. Flexible electronics: the next ubiquitous platform. Proc. IEEE 100, 1486-1517 (2012).
2. Lochner, C. M., Khan, Y., Pierre, A. & Arias, A. C. All-organic optoelectronic sensor for pulse oximetry. Nat. Commun. 5, 5745 (2014).
3. Misra, V. et al. Flexible technologies for self-powered wearable health and environmental sensing. Proc. IEEE 103, 665-681 (2015).
4. Roselli, L. et al. Smart surfaces: large area electronics systems for internet of things enabled by energy harvesting. Proc. IEEE 102, 1723-1746 (2014).
5. Nilsson, H.-E. et al. System integration of electronic functions in smart packaging applications. IEEE Trans. Components, Packag. Manuf. Technol. 2, 1723-1734 (2012).
6. Jia, W. et al. Wearable textile biofuel cells for powering electronics. J. Mater. Chem. A 2, 18184-18189 (2014).
7. Song, Z. et al. Kirigami-based stretchable lithium-ion batteries. Sci. Rep. 5, 10988 (2015).
8. Stoppa, M. & Chiolerio, A. Wearable electronics and smart textiles: a critical review. Sensors 14, 11957-11992 (2014).
9. MacKenzie, J. D. & Ho, C. Perspectives on energy storage for flexible electronic systems. Proc. IEEE 103, 535-553 (2015).
10. Roundy, S., Wright, P. K. & Rabaey, J. M. Energy Scavenging for Wireless Sensor Networks with Special Focus on Vibrations Ch. 1, 1-26 (Springer US, 2004).
11. Gambier, P., Anton, S. R., Kong, N., Erturk, A. & Inman, D. J. Piezoelectric, solar and thermal energy harvesting for hybrid lowpower generator systems with thin-film batteries. Meas. Sci. Technol. 23, 015101 (2012).
12. Wang, Z. et al. Integration of dispenser-printed ultra-low-voltage thermoelectric and energy storage devices. J. Micromechanics Microengineering 22, 094001 (2012).
13. Kim, S. et al. Ambient RF energy-harvesting technologies for self-sustainable standalone wireless sensor platforms. Proc. IEEE 102, 1649-1666 (2014).
14. Gwon, H. et al. Recent progress on flexible lithium rechargeable batteries. Energy Environ. Sci. 7, 538-551 (2014).
15. Hu, Y. & Sun, X. Flexible rechargeable lithium ion batteries: advances and challenges in materials and process technologies. J. Mater. Chem. A 2, 10712-10738 (2014).
16. Wang, X. et al. Flexible energy-storage devices: design consideration and recent progress. Adv. Mater. 26, 4763-4782 (2014).
17. Zhou, G., Li, F. & Cheng, H.-M. Progress in flexible lithium batteries and future prospects. Energy Environ. Sci. 7, 1307-1338 (2014).
18. Gaikwad, A. M., Arias, A. C. & Steingart, D. A. Recent progress on printed flexible batteries: mechanical challenges, printing technologies, and future prospects. Energy Technol. 3, 305-328 (2015).
19. Anton, S. R. & Sodano, H. A. A review of power harvesting using piezoelectric materials (2003-2006). Smart Mater. Struct. 16, R1-R21 (2007).
20. Dou, L. et al. 25th anniversary article: a decade of organic/polymeric photovoltaic research. Adv. Mater. 25, 6642-6671 (2013).
21. Bahk, J.-H., Fang, H., Yazawa, K. & Shakouri, A. Flexible thermoelectric materials and device optimization for wearable energy harvesting. J. Mater. Chem. C 3, 10362-10374 (2015).
22. Ha, M., Park, J., Lee, Y. & Ko, H. Triboelectric generators and sensors for self-powered wearable electronics. ACS Nano 9, 3421-3427 (2015).
23. Armand, M. & Tarascon, J.-M. Building better batteries. Nature 451, 652-657 (2008).
24. Tarascon, J.-M. & Armand, M. Issues and challenges facing rechargeable lithium batteries. Nature 414, 359-367 (2001).
25. Hu, L. et al. Highly conductive paper for energy-storage devices. Proc. Natl. Acad. Sci. USA. 106, 21490-21494 (2009).
26. Gaikwad, A. M. et al. A high areal capacity flexible lithium-ion battery with a strain-compliant design. Adv. Energy Mater. 5, 1401389 (2014).
27. Lee, Y.-H. et al. Wearable textile battery rechargeable by solar energy. Nano Lett. 13, 5753-5761 (2013).
28. Gaikwad, A. M. et al. Highly stretchable alkaline batteries based on an embedded conductive fabric. Adv. Mater. 24, 5071-5076 (2012).
29. Gaikwad, A. M., Steingart, D. A., Ng, T. N., Schwartz, D. E. & Whiting, G. L. A flexible high potential printed battery for powering printed electronics. Appl. Phys. Lett. 102, 233302 (2013).
30. Li, N., Chen, Z., Ren, W., Li, F. & Cheng, H.-M. Flexible graphene-based lithium ion batteries with ultrafast charge and discharge rates. Proc. Natl. Acad. Sci. USA. 109, 17360-17365 (2012).
31. Gaikwad, A. M., Whiting, G. L., Steingart, D. A. & Arias, A. C. Highly flexible, printed alkaline batteries based on mesh-embedded electrodes. Adv. Mater. 23, 3251-3255 (2011).
32. Gaikwad, A. M., Chu, H. N., Qeraj, R., Zamarayeva, A. M. & Steingart, D. A. Reinforced electrode architecture for a flexible battery with paperlike characteristics. Energy Technol. 1, 177-185 (2013).
33. Choi, K., Cho, S., Chun, S., Yoo, J. & Lee, C. Heterolayered, one-dimensional nanobuilding block mat batteries. Nano Lett. 14, 5677-5686 (2014).
34. Luo, S. et al. Binder-free LiCoO2/carbon nanotube cathodes for high-performance lithium ion batteries. Adv. Mater. 24, 2294-2298 (2012).
35. 4 nanowire arrays/carbon cloth anodes for a novel class of high-performance flexible lithium-ion batteries. Nano Lett. 12, 3005-3011 (2012).
36. Koo, M. et al. Bendable inorganic thin-film battery for fully flexible electronic systems. Nano Lett. 12, 4810-4816 (2012).
37. Kim, J.-S. et al. A half millimeter thick coplanar flexible battery with wireless recharging capability. Nano Lett. 15, 2350-2357 (2015).
38. Song, Z. et al. Origami lithium-ion batteries. Nat. Commun. 5, 3140 (2014).
39. Pu, X. et al. A self-charging power unit by integration of a textile triboelectric nanogenerator and a flexible lithium-ion battery for wearable electronics. Adv. Mater. 27, 2472-2478 (2015).
40. Minnaert, B. & Veelaert, P. The appropriateness of organic solar cells for indoor lighting conditions. Paper presented at SPIE Photonics Europe, Brussels, Belgium. International Society for Optics and Photonics. 77221P-1-77221P-11, doi: 10.1117/12.854774 (2010, April 12).
41. Nelson, J. The Physics of Solar Cells Ch. 1, 6-10 (Imperial College Press, 2003).
42. Krebs, F. C. et al. The OE-A OPV demonstrator anno domini 2011. Energy Environ. Sci. 4, 4116-4123 (2011).
43. Carmo, J. P., Gomes, J. M., Gonçalves, L. M. & Correia, J. H. A flexible thin-film for powering stand alone electronic devices. Measurement 46, 4145-4151 (2013).
44. Dennler, G. et al. A self-rechargeable and flexible polymer solar battery. Sol. Energy 81, 947-957 (2007).
45. Dieffenderfer, J. P. et al. Solar powered wrist worn acquisition system for continuous photoplethysmogram monitoring. Paper presented at Engineering in Medicine and Biology Society (EMBC), 2014 36th Annual International Conference of the IEEE, Chicago, IL, USA. IEEE. 3142-3145, doi: 10.1109/EMBC.2014.6944289 (2014, August 26-30).
46. Andrew, J., Khalil, A., Aron, N., Donald, V. & Gary, H. Low-cost, flexible battery packaging materials. JOM 54, 29-32 (2002).
47. Aurbach, D., Zinigrad, E., Cohen, Y. & Teller, H. A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions. Solid State Ionics 148, 405-416 (2002).
48. Schweikert, N., Hahn, H. & Indris, S. Cycling behaviour of Li/Li4Ti5O12 cells studied by electrochemical impedance spectroscopy. Phys. Chem. Chem. Phys. 13, 6234-6240 (2011).
49. Hu, L., Wu, H., La Mantia, F., Yang, Y. & Cui, Y. Thin, flexible secondary Li-ion paper batteries. ACS Nano 4, 5843-5848 (2010).
50. Kim, S.-H. et al. Printable solid-state lithium-ion batteries: a new route toward shape-conformable power sources with aesthetic versatility for flexible electronics. Nano Lett. 15, 5168-5177 (2015).
51. Xu, S. et al. Stretchable batteries with self-similar serpentine interconnects and integrated wireless recharging systems. Nat. Commun. 4, 1543 (2013).
52. Singh, N. et al. Paintable battery. Sci. Rep. 2, 481 (2012).
53. Sun, K. et al. 3D printing of interdigitated Li-ion microbattery architectures. Adv. Mater. 25, 4539-4543 (2013).