Interfacial properties of ultrahigh-performance concrete and high-strength concrete bridge connections

Journal of Materials in Civil Engineering

Volumn 28, Issue 5, 2016, Pages

  Hussein, Husam H ^a   Walsh, Kenneth K ^a   Sargand, Shad M ^a   Steinberg, Eric P ^a  

^a US Institute of Navigation   (United States)

Author keywords

Adhesion; ASTM C1404 C1404M; Bond strength; Bridge connections; Cohesion; Direct tension test; Friction coefficient; High strength concrete (HSC); Interfacial properties; Shear resistance; Slant shear; Tensile resistance; Ultra high performance concrete (UHPC)

Indexed keywords

ADHESION; BINDERS; BOND STRENGTH (MATERIALS); CONCRETES; CONNECTORS (STRUCTURAL); FRICTION; TENSILE STRESS; TENSILE TESTING; TRIBOLOGY;

ASTM C1404/ C1404M; BRIDGE CONNECTIONS; COHESION; DIRECT TENSION TESTS; FRICTION COEFFICIENTS; HIGH STRENGTH CONCRETES; INTERFACIAL PROPERTY; SHEAR RESISTANCES; TENSILE RESISTANCE; ULTRA HIGH PERFORMANCE CONCRETES;

HIGH PERFORMANCE CONCRETE;

ADHESION; BRIDGE; COHESION; CONCRETE; FRICTION; SHEAR TEST; STRENGTH; TENSILE STRESS;

EID: 84968546865     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)MT.1943-5533.0001456     Document Type: Article

References (43)

1. American Association of State Highway and Transportation Officials, Load and Resistance Factor Design (AASHTO, LRFD). (2010). Bridge design specifications, 5th Ed., Washington, DC.
2. American Concrete Institute (ACI). (2011). "Building code requirements for structural concrete and commentary." ACI 318R-11, Farmington Hills, MI.
3. Association Française de Génie Civil (AFGC). (2002). "Ultra-high performance fiber-reinforced concrete interim recommendations." Paris.
4. ASTM. (2003). "Standard test method for bond strength of adhesive systems used with concrete as measured by direct tension (withdrawn 2010)." ASTM C1404/C1404M-98, West Conshohocken, PA.
5. ASTM. (2004a). "Standard test method for splitting tensile strength of cylindrical concrete specimens." ASTM C496/C496M-11, West Conshohocken, PA.
6. ASTM. (2004b). "Standard test method for tensile strength of concrete surfaces and the bond strength or tensile strength of concrete repair and overlay materials by direct tension (pull-off method)." ASTM C1583/C1583M-04, West Conshohocken, PA.
7. ASTM. (2010). "Standard test method for flexural strength of concrete (using simple beam with third-point loading)." ASTM C78/C78M-10,West Conshohocken, PA.
8. ASTM. (2012). "Standard practice for making and curing concrete test specimens in the field." ASTM C31/C31M-12,West Conshohocken, PA.
9. ASTM. (2013a). "Standard specification for epoxy-resin-base bonding systems for concrete." ASTM C881/C881M-13, West Conshohocken, PA.
10. ASTM. (2013b). "Standard test method for bond strength of epoxy-resin systems used with concrete by slant shear." ASTM C882/C882M-13a, West Conshohocken, PA.
11. ASTM. (2013c). "Standard test method for obtaining and testing drilled cores and sawed beams of concrete." ASTM C42/C42M-13, West Conshohocken, PA.
12. ASTM. (2014a). "Standard practice for making and curing concrete test specimens in the laboratory." ASTM C192/C192M-14, West Conshohocken, PA.
13. ASTM. (2014b). "Standard test method for compressive strength of cylindrical concrete specimens." ASTM C39/C39M-14a, West Conshohocken, PA.
14. Austin, S., Robins, P., and Pan, Y. (1995). "Tensile bond testing of concrete repairs." Mater. Struct., 28(5), 249-259.
15. Bonaldo, E., Barros, J. A., and Lourenço, P. B. (2005). "Bond characterization between concrete substrate and repairing SFRC using pull-off testing." Int. J. Adhes. Adhes., 25(6), 463-474.
16. Carbonell, M. A., Harris, D. H., Shann, S. V., and Ahlborn, T. M. (2012). "Bond strength between UHPC and normal strength concrete (NSC) in accordance with split prism and freeze-thaw cycling tests." Proc., Hipermat 2012 3rd Int. Symp. on UHPC and Nanotechnology for High Performance Construction Materials, Kassel University Press, Kassel, Germany, 377-384.
17. Carbonell, M. A., Harris, D. K., Ahlborn, T. M., and Froster, D. C. (2013). "Bond performance between ultrahigh-performance concrete and normal- strength concrete." J. Mater. Civ. Eng., 10.1061/(ASCE)MT.1943- 5533.0000890, 04014031.
18. Geissert, D. G., Li, S. E., Frantz, G. C., and Stephens, J. E. (1999). "Splitting prism test method to evaluate concrete-to-concrete bond strength." ACI Mater. J., 96(3), 359-366.
19. Graybeal, B. A. (2006). "Material property characterization of ultra-high performance concrete." Rep. No. FHWA-HRT-06-103, Federal Highway Administration, Washington, DC.
20. Graybeal, B. A. (2010). "Behavior of field-cast ultra-high performance concrete bridge deck connections under cyclic and static structural loading." Rep. No. FHWA-HRT-11-023, Federal Highway Administration, Washington, DC.
21. Graybeal, B. A. (2012). "Construction of field-cast ultra-high performance concrete connections." Rep. No. FHWA-HRT-12-038, Federal Highway Administration, Washington, DC.
22. Graybeal, B. A. (2013). "Ultra-high performance concrete: A state-of-theart report for the bridge community." Rep. No. FHWA-HRT-13-060, Federal Highway Administration, Washington, DC.
23. Harris, D. K., Carbonell, M. A., Gheitasi, A., Ahlborn, T. M., and Rush, S. V. (2014). "The challenges related to interface bond characterization of ultra-high-performance concrete with implications for bridge rehabilitation practices." ASTM, West Conshohocken, PA.
24. Harris, D. K., Sarkar, J., and Ahlborn, T. M. (2011). "Characterization of interface bond of ultra-high-performance concrete bridge deck overlays." J. Transp. Res. Board, 2240, 40-49.
25. Hoomes, L. C., Ozyildirim, C., and Brown, M. C. (2014). "Evaluation of high performance fiber-reinforced concrete for bridge deck connections, closure pours, and joints." Transportation Research Board 93rd Annual Meeting, Transportation Research Board, Washington, DC.
26. Issa, M., Alhassan, M., and Shabila, H. (2008). "High-performance plain and fibrous latex-modified and microsilica concrete overlays." J. Mater. Civ. Eng., 10.1061/(ASCE)0899-1561(2008)20:12(742), 742-753.
27. Julio, E. N., Branco, F. A., and Silva, V. D. (2004). "Concrete-to-concrete bond strength. Influence of the roughness of the substrate surface." Constr. Build. Mater., 18(9), 675-681.
28. Momayez, A., Ehsani, M. R., Ramezanianpour, A. A., and Rajaie, H. (2005). "Comparison of methods for evaluating bond strength between concrete substrate and repair materials." Cem. Concr. Res., 35(4), 748-757.
29. Ohio Department of Transportation (ODOT). (2013). "Ohio construction and material specifications." Office of Structural Engineering, Columbus, OH.
30. Perry, V., and Weiss, G. (2009). "Innovative field cast UHPC joints for precast bridge decks-Design, prototype testing and projects." Proc., Int. Workshop of Designing and Building with Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC): State of the Art and Development, F. Toutlemonde and J. Resplendino, eds., Wiley, Hoboken, NJ, 421-436.
31. Perry, V. H., and Mathew Royce, P. E. (2010). "Innovative field-cast UHPC joints for precast bridge decks (side-by-side deck bulb-tees), Village of Lyons, New York: Design, prototyping, testing and construction." Proc., 3rd Int. fib Congress Incorporating the PCI Annual Convention and Bridge Conf., Vol. 1, Precast Prestressed Concrete Institute, Chicago, 1054-1066.
32. Perry, V. H., and Seibert, P. J. (2008). "The use of UHPFRC (Ductal) for bridges in North America: The technology, applications and challenges facing commercialization." Proc., 2nd Int. Symp. on Ultra-High Performance Concrete, E. Fehling, S. Michael, and S. Stürwald, eds., Kassel University Press, Kassel, Germany, 815-822.
33. Rajlic, B., Murray, P., Dykstra, D., and Krisciunas, R. (2010). "The Eagle River Bridge superstructure replacement." Proc., 8th Int. Conf. on Short and Medium Span Bridges, F. M. Bartlett, ed., Vol. 1, Canadian Society for Civil Engineering (CSCE), Montréal, 641-649.
34. Robins, P. J., and Austin, S. A. (1995). "A unified failure envelope from the evaluation of concrete repair bond tests." Mag. Concr. Res., 47(170), 57-68.
35. Russell, H. G. (2009). "Adjacent precast concrete box beam bridges: Connection details." Transportation Research Board, Washington, DC.
36. Russell, H. G. (2011). "Adjacent precast concrete box-beam bridges: State of the practice." PCI J., 56(1), 75-91.
37. Santos, P., Julio, E. N., and Silva, V. (2007). "Correlation between concreteto- concrete bond strength and the roughness of the substrate surface." Constr. Build. Mater., 21(8), 1688-1695.
38. Santos, P., and Júlio, E. N. (2012). "A state-of-the-art review on shearfriction." Eng. Struct., 45, 435-448.
39. Sprinkel, M. M. (1997). "Preparing bridge decks for overlays." Concr. Repair Digest, 8(5), 242-247.
40. Tayeh, B. A., Abu Bakar, B. H., Megat Johari, M. A., and Voo, Y. L. (2012). "Mechanical and permeability properties of the interface between normal concrete substrate and ultra-high performance fiber concrete overlay." Constr. Build. Mater., 36, 538-548.
41. Tayeh, B. A., Abu Bakar, B. H., Megat Johari, M. A., and Voo, Y. L. (2013). "Evaluation of bond strength between normal concrete substrate and ultra-high performance fiber concrete as a repair material." Proc. Eng., 54, 554-563.
42. Tayeh, B. A., Abu Bakar, B. H., Megat Johari, M. A., and Zeyad, A. M. (2014). "Microstructural analysis of the adhesion mechanism between old concrete substrate and UHPFC." J. Adhes. Sci. Technol., 28(18), 1846-1864.
43. Zheng,W., Kwan, A. K. H., and Lee, P. K. K. (2001). "Direct tension test of concrete." ACI Mater. J., 98(1), 63-71.