A state-of-the-art review on shear-friction

Engineering Structures

Volumn 45, Issue , 2012, Pages 435-448

  Santos, Pedro M D ^a   Júlio, Eduardo N B S ^b  

^a POLYTECHNIC INSTITUTE OF LEIRIA   (Portugal)

^b INSTITUTO SUPERIOR TÉCNICO   (Portugal)

Author keywords

Bond; Concrete to concrete; Design; Interface; Shear friction

Indexed keywords

APPLICATION FIELDS; BOND; CONCRETE STRENGTH; CONCRETE-TO-CONCRETE; DESIGN CODES; DOWEL ACTIONS; INFLUENCING FACTOR; LITERATURE REVIEWS; RESEARCH STUDIES; SHEAR-FRICTION; STATE-OF-THE-ART REVIEWS;

DESIGN; FRICTION; INTERFACES (MATERIALS);

TRIBOLOGY;

CONCRETE STRUCTURE; FRICTION; SHEAR; SHEAR STRENGTH;

EID: 84864822125     PISSN: 01410296     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engstruct.2012.06.036     Document Type: Review

References (57)

1. Model Code for concrete structures. Comité Euro-International du Béton, Secretariat Permanent, Case Postale 88, CH-1015 Lausanne, Switzerland, 1990, 460 pp.
2. Model Code 2010. First complete draft - vol. 1. Comité Euro-International du Béton, Secretariat Permanent, Case Postale 88, CH-1015 Lausanne, Switzerland, 2010, 318 pp.
3. Model Code 2010. First complete draft - vol. 2. Comité Euro-International du Béton, Secretariat Permanent, Case Postale 88, CH-1015 Lausanne, Switzerland, 2010, 312 pp.
4. EN 1992-1-1. Eurocode 2 - design of concrete structures - Part 1: General rules and rules for buildings. European Committee for Standardization, Avenue Marnix 17, B-1000 Brussels, Belgium, 2004, 225 pp. (with corrigendum of 16th January 2008).
5. ACI Committee 318. Building code requirements for structural concrete (ACI 318M-08) and commentary. American Concrete Institute, Farmington Hills, MI, 2008, 473 pp.
6. CAN/CSA A23.3. Design of concrete structures - structures design. Canadian Standards Association, 178 Rexdale Boulevard, Rexdale, Ontario, M9W 1R3, 2004, 258 p.
7. AASHTO LRFD bridge design specifications. American Association of State Highway and Transportation Officials, 4th edition, SI units edition, 2007, 1526 p.
8. AASHTO standard specifications for highway bridges. American Association of State Highway and Transportation Officials, 16th edition, 1996, 760 p.
9. PCI design handbook. Precast/Prestressed Concrete Institute, 7th edition, 2010.
10. BS 8110-1. Structural use of concrete. Part 1: Code of practice for design and construction. London: British Standard Institute; 1997.
11. Hsu T.T.C., Mau S.T., Chen B. Theory of shear transfer strength of reinforced concrete. ACI Struct J 1987, 84(2):149-160.
12. Hwang S.J., Yu H.W., Lee H.J. Theory of interface shear capacity of reinforced concrete. ASCE J Struct Eng 2000, 126(6):700-707.
13. Gohnert M. Proposed theory to determine the horizontal shear between composite precast and in situ concrete. Cement Concr Compos 2000, 22(6):469-476.
14. Zilch K, Reinecke R. Capacity of shear joints between high-strength precast elements and normal-strength cast-in-place decks. fib International symposium on high performance concrete. Orlando, USA, 25-27 September 2000.
15. Loov R.E., Patnaik A.K. Horizontal shear strength of composite concrete beams with a rough interface. PCI J 1994, 39(1):48-69.
16. Anderson A.R. Composite designs in precast and cast-in-place concrete. Prog Archit 1960, 41(9):172-179.
17. Hanson N.W. Precast-prestressed concrete bridges. 2. Horizontal shear connections. Development Department Bulletin D35. Portland Cement Assoc 1960, 2(2):38-58.
18. Mattock A.H., Kaar P.H. Precast-prestressed concrete bridges. 4. Shear tests of continuous girders. J PCA R&D Lab 1961, 3(1):19-46.
19. Saemann J.C., Washa G.W. Horizontal shear connections between precast beams and cast-in-place slabs. J Am Concr Inst 1964, 61(11):1309-1383.
20. Gaston J.R., Kriz L.B. Connections in precast concrete structures - scarf joints. PCI J 1964, 9(3):37-59.
21. Birkeland P.W., Birkeland H.W. Connections in precast concrete construction. J Am Concr Inst 1966, 63(3):345-368.
22. Badoux J.C., Hulsbos C.L. Horizontal shear connection in composite concrete beams under repeated loads. J Am Concr Inst 1967, 64(12):811-819.
23. Birkeland H.W. Precast and prestressed concrete. Class notes for course 1968, University of British Columbia, Spring.
24. Patnaik AH. Horizontal shear strength of composite concrete beams with a rough interface. PhD thesis, Department of Civil Engineering, University of Calgary, Calgary, Canada, 1992, 263 p.
25. Mast R.F. Auxiliary reinforcement in precast concrete connections. ASCE J Struct Div 1968, 94(6):1485-1504.
26. Hofbeck J.A., Ibrahim I.O., Mattock A.H. Shear transfer in reinforced concrete. J Am Concr Inst 1969, 66(2):119-128.
27. Mattock A.H., Hawkins N.M. Shear transfer in reinforced concrete - recent research. PCI J 1972, 17(2):55-75.
28. Mattock AH. Shear transfer in concrete having reinforcement at an angle to the shear plane. American Concrete Institute. Special Publication 42-2, January 1974. p. 17-42.
29. Hermansen B.R., Cowan J. Modified shear-friction theory for bracket design. J Am Concr Ins 1974, 71(2):55-60.
30. Mattock A.H., Johal L., Chow H.C. Shear transfer in reinforced concrete with moment or tension acting across the shear plane. PCI J 1975, 20(4):76-93.
31. Mattock A.H., Li W.K., Wang T.C. Shear transfer in lightweight reinforced concrete. PCI J 1976, 21(1):20-39.
32. Raths C.H. Reader comments of paper " Design proposals for reinforced concrete corbels" , published in PCI Journal, May-June 1976;21(3):18-42, by Mattock A. PCI J 1977, 22(2):93-98.
33. Shaikh A.F. Proposed revisions to shear-friction provisions. PCI J 1978, 23(2):12-21.
34. Loov RE. Design of precast connections. Paper presented at a seminar organized by Compa International Pt., Ltd. Singapore, 1978, 8 p.
35. Mattock A.H. Cyclic shear transfer and type of interface. ASCE J Struct Div 1981, 107(10):1945-1964.
36. Vecchio F.J., Collins M.P. The modified compression-field theory for reinforced concrete elements subjected to shear. J Am Concr Inst 1986, 83(2):219-231.
37. Walraven J.C. Fundamental analysis of aggregate interlock. ASCE J Struct Div 1981, 107(11):2245-2270.
38. Walraven J., Frénay J., Pruijssers A. Influence of concrete strength and load history on the shear friction capacity of concrete members. PCI J 1987, 32(1):66-84.
39. Mattock A.H. Reader comments of paper " Influence of concrete strength and load history on the shear friction capacity of concrete members" published in PCI Journal, January-February 1987;32(1):66-84, by Walraven J, Frénay J, Pruijssers A. PCI J 1988, 33(1):165-166.
40. Mau S., Hsu T. Reader comments of paper " Influence of concrete strength and load history on the shear friction capacity of concrete members" published in PCI Journal, January-February 1987;32(1):66-84, by Walraven J, Frénay J, Pruijssers A. PCI J 1988, 33(1):165-168.
41. Lin IJ, Chen YL. Shear transfer across a crack in reinforced high strength concrete. In: Proceedings 2nd east Asia-Pacific conference on structural engineering & construction, Chiang Mai, Thailand, January, 1989. p. 505-10.
42. Tsoukantas S.G., Tassios T.P. Shear resistance of connections between reinforced concrete linear precast elements. ACI Struct J 1989, 86(3):242-249.
43. Mattock A.H. Reader comments of paper " Horizontal shear strength of composite concrete beams with a rough interface" published in PCI Journal, January-February 1994;39(1):48-69, by Loov RE, Patnaik AK. PCI J 1994, 39(5):106-108.
44. Randl N. Investigations on transfer of forces between old and new concrete at different joint roughness. PhD thesis, University of Innsbruck, 1997, 379 p. [in German].
45. ASTM E 965. Standard test method for measuring pavement macrotexture depth using a volumetric technique. ASTM international, West Conshohocken, PA, 2001.
46. Ali M.A., White R.N. Enhanced contact model for shear friction of normal and high-strength concrete. ACI Struct J 1999, 96(3):348-362.
47. Valluvan R., Kreger M.E., Jirsa J.O. Evaluation of ACI 318-95 shear-friction provisions. ACI Struct J 1999, 96(4):473-481.
48. Patnaik A.H. Reader comments of paper " Evaluation of ACI 318-95 shear-friction provisions" published in ACI Structural Journal, July-August 1999;96(4):473-83, by Valluvan R, Kreger ME, Jirsa JO. ACI Struct J 2000, 97(3):525-536.
49. Mattock A.H. Shear friction and high-strength concrete. ACI Struct J 2001, 98(1):50-59.
50. Patnaik A.H. Behavior of composite concrete beams with smooth interface. ASCE J Struct Eng 2001, 127(4):356-366.
51. Kahn L.F., Mitchell A.D. Shear friction tests with high-strength concrete. ACI Struct J 2002, 99(1):98-103.
52. Papanicolaou C.G., Triantafillou T.C. Shear transfer capacity along pumice aggregate concrete and high-performance concrete interfaces. Mater Struct 2002, 35(4):237-245.
53. Gohnert M. Horizontal shear transfer across a roughened surface. Cement Concr Compos 2003, 25(3):379-385.
54. Mansur M.A., Vinayagam T., Tan K.H. Shear transfer across a crack in reinforced high-strength concrete. ASCE J Mater Civil Eng 2008, 20(4):294-302.
55. Santos P.M.D., Júlio E.N.B.S. Factors affecting bond between new and old concrete. ACI Mater J 2011, 108(4):449-456.
56. Santos PMD, Júlio ENBS. Recommend improvements to current shear-friction provisions of model code. In: 3rd fib international congress, Washington, DC, May 29-June 02, 2010.
57. Santos P.M.D., Júlio E.N.B.S., Silva V.D. Correlation between concrete-to-concrete bond strength and the roughness of the substrate surface. Construct Build Mater 2007, 21(8):1688-1695.