Three-dimensional printing and 3D slicer powerful tools in understanding and treating structural lung disease

Chest

Volumn 149, Issue 5, 2016, Pages 1136-1142

  Cheng, George Z ^a   Estepar, Raul San Jose ^b   Folch, Erik ^a   Onieva, Jorge ^b   Gangadharan, Sidhu ^a   Majid, Adnan ^a  

^a HARVARD MEDICAL SCHOOL   (United States)

^b BRIGHAM AND WOMEN S HOSPITAL   (United States)

Author keywords

3D printing; 3D Slicer; Pulmonary; Stent

Indexed keywords

1,3 BUTADIENE; ACRYLONITRILE; GLYCOLIC ACID; POLYAMIDE; POLYCARBONATE; POLYLACTIC ACID; POLYSTYRENE;

ACCURACY; BONE REGENERATION; COMPUTER ASSISTED TOMOGRAPHY; CONTROLLED STUDY; DENSITOMETRY; EMPHYSEMA; HEALTH CARE; HEALTH CARE COST; HEALTH CARE FACILITY; HUMAN; HYDROLYSIS; IMAGE ANALYSIS; LUNG DISEASE; NON SMALL CELL LUNG CANCER; NUCLEAR MAGNETIC RESONANCE IMAGING; PHYSICAL MODEL; PHYSICIAN; PRIORITY JOURNAL; PULMONOLOGY; REVIEW; SKILL; THERMOSTABILITY; THREE DIMENSIONAL IMAGING; THREE DIMENSIONAL PRINTING; THREE DIMENSIONAL SLICER; TISSUE ENGINEERING; TRACHEOBRONCHIAL TREE; TRACHEOBRONCHOMALACIA; TUMOR GROWTH; COMPUTER AIDED DESIGN; DIAGNOSTIC IMAGING; LUNG; LUNG DISEASES; PROSTHESIS DESIGN; PROSTHESIS IMPLANTATION; STENT;

COMPUTER-AIDED DESIGN; HUMANS; IMAGING, THREE-DIMENSIONAL; LUNG; LUNG DISEASES; PRINTING, THREE-DIMENSIONAL; PROSTHESIS DESIGN; PROSTHESIS IMPLANTATION; STENTS;

EID: 84966539217     PISSN: 00123692     EISSN: 19313543     Source Type: Journal    
DOI: 10.1016/j.chest.2016.03.001     Document Type: Article

References (37)

1. McGurk M, Amis AA, Potamianos P, Goodger NM. Rapid prototyping techniques for anatomical modelling in medicine. Ann R Coll Surg Engl. 1997;79(3):169-174.
2. Gibson I, Rosen D, Stucker B. Additive Manufacturing Technologies 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing. 2nd ed. New York, NY: Springer; 2015.
3. Kim MS, Hansgen AR, Wink O, Quaife RA, Carroll JD. Rapid prototyping: a new tool in understanding and treating structural heart disease. Circulation. 2008;117(18):2388-2394.
4. Ramanath HS, Chua CK, Leong KF, Shah KD. Melt flow behaviour of poly-epsilon-caprolactone in fused deposition modelling. J Mater Sci Mater Med. 2008;19(7):2541-2550.
5. Chen CH, Shyu VB, Chen JP, Lee MY. Selective laser sintered polyepsilon-caprolactone scaffold hybridized with collagen hydrogel for cartilage tissue engineering. Biofabrication. 2014;6(1):015004.
6. Serra T, Mateos-Timoneda MA, Planell JA, Navarro M. 3D printed PLA-based scaffolds: a versatile tool in regenerative medicine. Organogenesis. 2013;9(4):239-244.
7. Kapoor DN, Bhatia A, Kaur R, Sharma R, Kaur G, Dhawan S. PLGA: a unique polymer for drug delivery. Ther Deliv. 2015;6(1):41-58.
8. Emami J, Hamishehkar H, Najafabadi AR, et al. Particle size design of PLGA microspheres for potential pulmonary drug delivery using response surface methodology. J Microencapsul. 2009;26(1):1-8.
9. Chia HN, Wu BM. Recent advances in 3D printing of biomaterials. J Biol Eng. 2015;9:4.
10. D'Urso PS, Barker TM, Earwaker WJ, et al. Stereolithographic biomodelling in cranio-maxillofacial surgery: a prospective trial. J Craniomaxillofac Surg. 1999;27(1):30-37.
11. Heissler E, Fischer FS, Bolouri S, et al. Custom-made cast titanium implants produced with CAD/CAM for the reconstruction of cranium defects. Int J Oral Maxillofac Surg. 1998;27(5):334-338.
12. Munjal S, Leopold SS, Kornreich D, Shott S, Finn HA. CT-generated 3-dimensional models for complex acetabular reconstruction. J Arthroplasty. 2000;15(5):644-653.
13. Bustamante S, Bose S, Bishop P, Klatte R, Norris F. Novel application of rapid prototyping for simulation of bronchoscopic anatomy. J Cardiothorac Vasc Anesth. 2014;28(4):1134-1137.
14. Hoque ME, Chuan YL, Pashby I. Extrusion based rapid prototyping technique: an advanced platform for tissue engineering scaffold fabrication. Biopolymers. 2012;97(2):83-93.
15. Skoog SA, Goering PL, Narayan RJ. Stereolithography in tissue engineering. J Mater Sci Mater Med. 2014;25(3):845-856.
16. Lee V, Singh G, Trasatti JP, et al. Design and fabrication of human skin by three-dimensional bioprinting. Tissue Eng Part C Methods. 2014;20(6):473-484.
17. Tam MD, Laycock SD, Jayne D, Babar J, Noble B. 3-D printouts of the tracheobronchial tree generated from CT images as an aid to management in a case of tracheobronchial chondromalacia caused by relapsing polychondritis. J Radiol Case Rep. 2013;7(8):34-43.
18. Ernst A, Herth FJF. Principles and Practice of Interventional Pulmonology. New York, NY: Springer; 2013.
19. Freitag L, Darwiche K. Endoscopic treatment of tracheal stenosis. Thorac Surg Clin. 2014;24(1):27-40.
20. Morrison RJ, Hollister SJ, Niedner MF, et al. Mitigation of tracheobronchomalacia with 3D-printed personalized medical devices in pediatric patients [published correction appears in Sci Transl Med. 2015;7(287):287er4] Sci Transl Med. 2015;7(285):285ra264.
21. Cheng GZ, Folch E, Brik R, et al. Three-dimensional modeled T-tube design and insertion in a patient with tracheal dehiscence. Chest. 2015;148(4):e106-e108.
22. Rutala WA, Weber DJ; Healthcare Infection Control Practices Advisory Committee. Guideline for disinfection and sterilization in healthcare facilities, 2008. http://www.cdc.gov/hicpac/pdf/guidelines/Disinfection-Nov-2008.pdf. Accessed December 1, 2015.
23. US Food and Drug Administration. Premarket approval (PMA). http://www.fda.gov/Medicaldevices/Deviceregulationandguidance/Howtomarketyourdevice/Premarketsubmissions/Premarket approvalpma/Default.Htm. Accessed January 2, 2016.
24. US Food and Drug Administration. Device advice: comprehensive regulatory assistance. http://www.fda.gov/MedicalDevices/Device RegulationandGuidance/default.htm. Accessed January 2, 2016.
25. US Food and Drug Administration. Premarket notification 510(k). http://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/HowtoMarketYourDevice/PremarketSubmissions/Premarket Notification510k/default.htm. Accessed January 2, 2016.
26. US Food and Drug Administration. Designating humanitarian use device (HUD). http://www.fda.gov/ForIndustry/DevelopingProducts forRareDiseasesConditions/DesignatingHumanitarianUseDevices HUDS/default.htm. Accessed January 2, 2016.
27. Hartford J. FDA's view on 3-D printing medical devices. Medical Device and Diagnostic Industry. February 11, 2015. http://www. mddionline.com/article/fdas-view-3-d-printing-medical-devices. Accessed January 2, 2016.
28. Morrison RJ, Kashlan KN, Flanangan CL, et al. Regulatory considerations in the design and manufacturing of implantable 3D-printed medical devices. Clin Transl Sci. 2015;8(5): 594-600.
29. Fedorov A, Beichel R, Kalpathy-Cramer J, et al. 3D Slicer as an image computing platform for the Quantitative Imaging Network. Magn Reson Imaging. 2012;30(9):1323-1341.
30. Lutey BA, Conradi SH, Atkinson JJ, et al. Accurate measurement of small airways on low-dose thoracic CT scans in smokers. Chest. 2013;143(5):1321-1329.
31. Yamashiro T, Matsuoka S, Estepar RS, et al. Kurtosis and skewness of density histograms on inspiratory and expiratory CT scans in smokers. COPD. 2011;8(1):13-20.
32. Washko GR, Hunninghake GM, Fernandez IE, et al. Lung volumes and emphysema in smokers with interstitial lung abnormalities. N Engl J Med. 2011;364(10):897-906.
33. Washko GR, Dransfield MT, Estepar RS, et al. Airway wall attenuation: a biomarker of airway disease in subjects with COPD. J Appl Physiol. 2009;107(1):185-191.
34. Estepar RSJ, Ross JC, Harmouche R, Onieva J, Diaz AA, Washko GR. Chest Imaging Platform: an open-source library and workstation for quantitative chest imaging. Am J Respir Crit Care Med. 2015;191:A4975.
35. Kim V, Desai P, Newell JD, et al. Airway wall thickness is increased in COPD patients with bronchodilator responsiveness. Respir Res. 2014;15(1):84.
36. Velazquez ER, Parmar C, Jermoumi M, et al. Volumetric CTbased segmentation of NSCLC using 3D-Slicer. Sci Rep. 2013;3(1): 3529.
37. Nardelli P, Khan KA, Corvo A, et al. Optimizing parameters of an open-source airway segmentation algorithm using different CT images. Biomed Eng Online. 2015;14(1):62.