Mitigation of tracheobronchomalacia with 3D-printed personalized medical devices in pediatric patients

Science Translational Medicine

Volumn 7, Issue 285, 2015, Pages

  Morrison, Robert J ^a   Hollister, Scott J ^b   Niedner, Matthew F ^a   Mahani, Maryam Ghadimi ^a   Park, Albert H ^c   Mehta, Deepak K ^d   Ohye, Richard G ^a   Green, Glenn E ^a  

^a UNIVERSITY OF MICHIGAN MEDICAL SCHOOL   (United States)

^b UNIVERSITY OF MICHIGAN   (United States)

^c UNIVERSITY OF UTAH SCHOOL OF MEDICINE   (United States)

^d CHILDREN S HOSPITAL OF PITTSBURGH   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BICARBONATE; BIOMATERIAL; CARBON DIOXIDE;

ABDOMINAL DISTENSION; ACIDEMIA; ARTICLE; ASCITES; ATELECTASIS; BRADYCARDIA; BRONCHOSCOPY; CARDIOPULMONARY ARREST; CASE REPORT; CHILD; DIGEORGE SYNDROME; DISEASE SEVERITY; EQUIPMENT DESIGN; FAILURE TO THRIVE; FALLOT TETRALOGY; FATTY ACID DESATURATION; HUMAN; HUMAN TISSUE; HYPERCAPNIA; INFANT; LARYNGOSCOPY; LUNG INFECTION; MALE; MEDIASTINITIS; MEDICAL DEVICE; METABOLIC ALKALOSIS; OXYGEN SATURATION; PERSONALIZED MEDICINE; PH MEASUREMENT; POSITIVE END EXPIRATORY PRESSURE; PRESCHOOL CHILD; PRIORITY JOURNAL; PROTEIN LOSING GASTROENTEROPATHY; PSEUDOMONAS INFECTION; SPLINT; THREE DIMENSIONAL PRINTING; TISSUE GROWTH; TRACHEOBRONCHOMALACIA; VEIN THROMBOSIS; DEVICES;

CHILD; EQUIPMENT AND SUPPLIES; HUMANS; PRECISION MEDICINE; PRINTING, THREE-DIMENSIONAL; TRACHEOBRONCHOMALACIA;

EID: 84929483920     PISSN: 19466234     EISSN: 19466242     Source Type: Journal    
DOI: 10.1126/scitranslmed.3010825     Document Type: Article

References (42)

1. B. C Gross, J. L. Erkal, S. Y. Lockwood, C. Chen, D. M. Spence, Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. Anal. Chem. 86, 3240-3253 (2014).
2. I. Campbell, D. Bourell, I. Gibson, Additive manufacturing: Rapid prototyping comes of age. Rapid Prototyp. J. 18, 255-258 (2012).
3. G. T. Klein, Y. Lu, M. Y. Wang, 3D printing and neurosurgery-Ready for prime time? World Neurosurg. 80, 233-235 (2013).
4. J. Banks, Adding value in additive manufacturing: Researchers in the United Kingdom and Europe look to 3D printing for customization. IEEE Pulse 4, 22-26 (2013).
5. J. W. Chang, S. A. Park, J. K. Park, J. W. Choi, Y. S. Kim, Y. S. Shin, C. H. Kim, Tissue-engineered tracheal reconstruction using three-dimensionally printed artificial tracheal graft: Preliminary report. Artif. Organs 38, E95-E105 (2014).
6. S. Tibbits, 4D Printing: Multi-Material Shape Change. Archit. Design 84, 116-121 (2014).
7. S. D. Murgu, H. G. Colt, Tracheobronchomalacia and excessive dynamic airway collapse. Respirology 11, 388-406 (2006).
8. R. Boogaard, S.H. Huijsmans, M.W. Pijnenburg, H.A. Tiddens, J.C. de Jongste, PJ. Merkus, Tracheomalacia and bronchomalacia in children: Incidence and patient characteristics. Chest 128, 3391-3397 (2005).
9. V. Goyal, I. B. Masters, B. Chang, Interventions for primary (intrinsic) tracheomalacia in children. Cochrane Database Syst. Rev. 10, CD005304 (2012).
10. M. M. Carr, C. P. Poje, L. Kingston, D. Kielma, C. Heard, Complications in pediatric tracheostomies. Laryngoscope 111, 1925-1928 (2001).
11. J. G. Berry, R. J. Graham, D. W. Roberson, L. Rhein, D. A. Graham, J. Zhou, J. O'Brien, H. Putney, D. A. Goldmann, Patient characteristics associated with in-hospital mortality in children following tracheotomy. Arch. Dis. Child. 95, 703-710 (2010).
12. A. E. Overman, M. Liu, S. C Kurachek, M. R. Shreve, R. C. Maynard, M. C. Mammel, B. M. Moore, Tracheostomy for infants requiring prolonged mechanical ventilation: 10 Years' experience. Pediatrics 131, e1491-e1496 (2013).
13. E. P. Valerie, A. C. Durrant, V. Forte, P. Wales, P. Chait, P. C. Kim, A decade of using intraluminal tracheal/bronchial stents in the management of tracheomalacia and/or broncho-malacia: Is it better than aortopexy? J. Pediatr. Surg. 40, 904-907 (2005).
14. U.S. Department of Health and Human Services, FDA public health notification: Complications from metallic tracheal stents in patients with benign airway disorders, www.fda.gov/MedicalDevices/Safety/AlertsandNotices/PublicHealthNotifications/ucm062115.htm, issued 29 July 2005 [accessed 2 January 2015].
15. J. B. Haldane, J. M. Smith, in On Being the Right Size and Other Essays (Oxford Press, New York, 1985).
16. D. A. Zopf, C. L. Flanagan, M. Wheeler, S. J. Hollister, G. E. Green, Treatment of severe porcine tracheomalacia with a 3-dimensionally printed, bioresorbable, external airway splint. JAMA Otolaryngol. Head Neck Surg. 140, 66-71 (2014).
17. D. A. Zopf, S. J. Hollister, M. E. Nelson, R. G. Ohye, G. E. Green, Bioresorbable airway splint created with a three-dimensional printer. N. Engl. J. Med. 368, 2043-2045 (2013).
18. C. L. Flanagan, W.-J. Tseng, C.-Y. Lin, D. Suarez-Gonzalez, W. L. Murphy, et al, "In vivo degradation of a novel poly(e-caprolactone) invertebral cage for anterior cervical discectomy and fusion in a porcine model," paper presented at the Tissue Engineering and Regenerative Medicine International Society (TERMIS) EU Meeting, Galway, Ireland, 13 to 17 June 2010.
19. A. Wright, G. M. Ardran, P. M. Stell, Does tracheostomy in children retard the growth of trachea or larynx? Clin. Otolaryngol. Allied Sci. 6, 91-96 (1981).
20. H. C. Shi, W. J. Deng, C. Pei, D. Lu, X. J. Zhang, X. H. Wang, Y. J. Zeng, Biomechanical properties of adult-excised porcine trachea for tracheal xenotransplantation. Xenotransplantation 16, 181-186 (2009).
21. K. Kida, W. M. Thurlbeck, Tracheal banding in weanling rats diminishes lung growth and alters lung architecture. Pediatr. Res. 15, 269-277 (1981).
22. H. Sun, L. Mei, C. Song, X. Cui, P. Wang, The in vivo degradation, absorption and excretion of PCL-based implant. Biomaterials 27, 1735-1740 (2006).
23. T. L. Gerstle, A. M. Ibrahim, P. S. Kim, B. T. Lee, S. J. Lin, A plastic surgery application in evolution: Three-dimensional printing. Plast. Reconstr. Surg. 133, 446-451 (2014).
24. C. Schubert, M. C. van Langeveld, L. A. Donoso, Innovations in 3D printing: A 3D overview from optics to organs. Br. J. Ophthalmol. 98, 159-161 (2014).
25. J. A. Gillis, S. F. Morris, Three-dimensional printing of perforator vascular anatomy. Plast. Reconstr. Surg. 133, 80e-82e (2014).
26. I. D. Ursan, L. Chiu, A. Pierce, Three-dimensional drug printing: A structured review. J. Am. Pharm. Assoc. 53, 136-144 (2013).
27. K. Wren, Science and society. Experts warn against bans on 3D printing. Science 342, 439 (2013) .
28. K. B. Chien, E. Makridakis, R. N. Shah, Three-dimensional printing of soy protein scaffolds for tissue regeneration. Tissue Eng. Part C Methods 19, 417-426 (2013).
29. R. Partridge, N. Conlisk, J. A. Davies, In-lab three-dimensional printing: An inexpensive tool for experimentation and visualization for the field of organogenesis. Organogenesis 8, 22-27 (2012).
30. F. Rengier, A. Mehndiratta, H. von Tengg-Kobligk, C. M. Zechmann, R. Unterhinninghofen, H. U. Kauczor, F. L. Giesel, 3D printing based on imaging data: Review of medical applications. Int. J. Comput. Assist. Radiol. Surg. 5, 335-341 (2010).
31. P. Bugmann, P. C. Rimensberger, A. Kalangos, C. Barazzone, M. Beghetti, F. J. Lang, Extra-tracheal biodegradable splint to treat life-threatening tracheomalacia. Ann. Thorac. Surg. 78, 1446-1448 (2004).
32. J. H. Cho, H. Kim, J. Kim, External tracheal stabilization technique for acquired tracheomalacia using a tailored silicone tube. Ann. Thorac. Surg. 94, 1356-1358 (2012).
33. T. Sakamoto, Y. Nagase, H. Hasegawa, T. Shin'oka, H. Tomimatsu, H. Kurosawa, One-stage intracardiac repair in combination with external stenting of the trachea and right bronchus for tetralogy of Fallot with an absent pulmonary valve and tracheobronchomalacia. J. Thorac. Cardiovasc. Surg. 130, 1717-1718 (2005).
34. U.S. Department of Health and Human Services, Additive manufacturing of medical devices: An interactive discussion on the technical considerations of 3D printing; public workshop. www.fda.gov/MedicalDevices/NewsEvents/WorkshopsConferences/ ucm397324.htm. 8 to 9 October 2014.
35. S. V. Murphy, A. Atala, 3D Bioprinting of tissues and organs. Nat. Biotechnol. 32, 773-785 (2014) .
36. Investigational Device Exemptions, Code of Federal Regulations, title 21, vol. 8, part 812, subpart B, Section 812.36, revised 1 April 2014 [accessed 30 October 2014].
37. S. J. Hollister, C. L. Flanagan, D. A. Zopf, R. J. Morrison, H. Nasser, J. J. Patel, E. Ebramzadeh, S. N. Sangiorgio, M. B. Wheeler, G. E. Green, Design control for clinical translation of 3D printed modular scaffolds. Ann. Biomed. Eng. 43, 774-786 (2015).
38. J. M. Williams, A. Adewunmi, R. M. Schek, C. L. Flanagan, P. H. Krebsbach, S. E. Feinberg, S. J. Hollister, S. Das, Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. Biomateriais 26, 4817-4827 (2005).
39. B. Partee, S. J. Hollister, S. Das, Selective laser sintering process optimization for layered manufacturing of CAPA 6501 polycaprolactone bone tissue engineering scaffolds. J. Manuf. Sci. Eng. 128, 531-540 (2006).
40. M. H. Smith, C. L. Flanagan, J. M. Kemppainen, J. A. Sack, H. Chung, S. Das, S. J. Hollister, S. E. Feinberg, Computed tomography-based tissue-engineered scaffolds in craniomaxil-lofacial surgery, int. J. Med. Robot 3, 207-216 (2007).
41. U.S. Department of Health and Human Services, Guidance for industry and Food and Drug Administration staff: Non-clinical engineering tests and recommended labeling for intra-vasular stents and associated delivery systems, www.fda.gov/downloads/MedicalDevices/DeviceRegulationandGuidance/GuidanceDocuments/ucm071986.pdf, issued 18 April 2010 [accessed 1 October 2014].
42. ASTM Standard F2606-08, Standard guide for three-point bending of balloon expandable vascular stents and stent systems (ASTM International, West Conshohocken, PA, 2014).