Three-Dimensional Printing and Medical Imaging: A Review of the Methods and Applications

Current Problems in Diagnostic Radiology

Volumn 45, Issue 1, 2016, Pages 2-9

  Marro, Alessandro ^a   Bandukwala, Taha ^a   Mak, Walter ^b  

^a UNIVERSITY OF TORONTO   (Canada)

^b ST MICHAEL'S HOSPITAL   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

BIOPRINTING; CARDIAC IMAGING; COMPUTER ASSISTED TOMOGRAPHY; DIAGNOSTIC IMAGING; DIGITAL IMAGING AND COMMUNICATIONS IN MEDICINE; ECHOGRAPHY; ENDOVASCULAR ANEURYSM REPAIR; FUSED DEPOSITION MODELING; GASTROINTESTINAL SURGERY; HEAD AND NECK SURGERY; HUMAN; IMAGE PROCESSING; INKJET PRINTING; MEDICAL EDUCATION; MUSCULOSKELETAL DISEASE; NUCLEAR MAGNETIC RESONANCE IMAGING; ORTHOPEDIC SURGERY; PREOPERATIVE EVALUATION; PRINTING; RADIOLOGIST; REVIEW; STEREOLITHOGRAPHY; THREE DIMENSIONAL PRINTING; TREATMENT PLANNING; UROLOGIC SURGERY; PROCEDURES; RADIOLOGY INFORMATION SYSTEM;

DIAGNOSTIC IMAGING; HUMANS; MAGNETIC RESONANCE IMAGING; PRINTING, THREE-DIMENSIONAL; RADIOLOGY INFORMATION SYSTEMS; TOMOGRAPHY, X-RAY COMPUTED; ULTRASONOGRAPHY;

EID: 84961211420     PISSN: 03630188     EISSN: 15356302     Source Type: Journal    
DOI: 10.1067/j.cpradiol.2015.07.009     Document Type: Review

References (59)

1. Koff W, Gustafson P. 3D Printing and the Future of Manufacturing. CSC Lead Edge Forum [Internet] 2012; Available from: . http://assets1.csc.com/innovation/downloads/LEF_20123DPrinting.pdf.
2. Hull CW. Apparatus for Production of Threedimensional Objects By Stereolithography 1986.
3. Alto P. 3D printing market to grow to US$16.2 billion in 2018. Met Powder Rep 2014, 69(3):42. http://linkinghub.elsevier.com/retrieve/pii/S0026065714701389.
4. Malone E., Lipson H. Fab@Home: the personal desktop fabricator kit. Rapid Prototyp J 2007, 13(4):245-255.
5. Berman B. 3-D printing: The new industrial revolution. Bus Horiz 2012, 55(2):155-162. http://dx.doi.org/10.1016/j.bushor.2011.11.003.
6. Costello J.P., Olivieri L.J., Su L., et al. Incorporating three-dimensional printing into a simulation-based congenital heart disease and critical care training curriculum for resident physicians. Congenit Heart Dis 2015, 185-190.
7. Gibson I., Cheung L.K., Chow S.P., et al. The use of rapid prototyping to assist medical applications. Rapid Prototyp J 2006, 12:53-58.
8. Farooqi K.M., Sengupta P.P. Echocardiography and three-dimensional printing: sound ideas to touch a heart. J Am Soc Echocardiogr 2015, 28(4):398-403.
9. Rengier F., Mehndiratta a., Von Tengg-Kobligk H., et al. 3D printing based on imaging data: Review of medical applications. Int J Comput Assist Radiol Surg 2010, 5:335-341.
10. Bibb R., Winder J. A review of the issues surrounding three-dimensional computed tomography for medical modelling using rapid prototyping techniques. Radiography 2010, 16:78-83.
11. Olszewski R. Three-dimensional rapid prototyping models in cranio-maxillofacial surgery: systematic review and new clinical applications. Proc Belg R Acad Med 2013, 43-77.
12. Rosset A., Spadola L., Ratib O. OsiriX: An open-source software for navigating in multidimensional DICOM images. J Digit Imaging 2004, 17(3):205-216.
13. Cignoni P., Cignoni P., Callieri M., et al. MeshLab: an open-source mesh processing tool. Eurographics Italian Chapter Conference 2008, 129-136.
14. Ebert L.C., Thali M.J., Ross S. Getting in touch-3D printing in Forensic Imaging. Forensic Sci Int 2011, 211:1-6.
15. Tam M.D., Laycock S.D., Bell D.G., et al. 3-D printout of a DICOM file to aid surgical planning in a 6 year old patient with a large scapular osteochondroma complicating congenital diaphyseal aclasia. J Radiol Case Rep 2012, 6:31-37.
16. Huotilainen E., Jaanimets R., Valášek J., et al. Inaccuracies in additive manufactured medical skull models caused by the DICOM to STL conversion process. J Craniomaxillofac Surg 2014, 42:259-265.
17. Levy R.a., Guduri S., Crawford R.H. Preliminary experience with selective laser sintering models of the human temporal bone. Am J Neuroradiol 1994, 15(3):473-477.
18. Boland T., Xu T., Damon B., et al. Application of inkjet printing to tissue engineering. Biotechnol J 2006, 1(9):910-917.
19. Nicklaus Children's Hospital Acquires 3D Printer to Support Pediatric Surgical Planning and Research - Miami Children's Hospital; 2015. Available from: . http://www.mch.com/press/EN/484/Nicklaus-Children-s-Hospital-Acquires-3D-Printer-to-Support-Pediatric-Surgical-Planning-and-Research.aspx.
20. 12 Hospitals in the UK Are Using Stratasys 3D Printers for the Creation of Surgical Models Prior to Surgery - 3DPrint.com 2015. Available from: . http://3dprint.com/13033/stratasys-3d-printers-surgery/.
21. Waran V., Narayanan V., Karuppiah R., et al. Injecting realism in surgical training - Initial simulation experience with custom 3D models. J Surg Educ 2014, 71(2):193-197.
22. Radecka E., Brehmer M., Holmgren K., et al. Magnusson a. Pelvicaliceal biomodeling as an aid to achieving optimal access in percutaneous nephrolithotripsy. J Endourol 2006, 20(2):92-101.
23. Murphy S.V., Atala A. 3D bioprinting of tissues and organs. Nat Biotechnol 2014, 32(8):773-785.
24. Singare S., Dichen L., Bingheng L., et al. Customized design and manufacturing of chin implant based on rapid prototyping. Rapid Prototyp J 2005, 11(2):113-118.
25. Cohen A., Laviv A., Berman P., et al. Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2009, 108(5):661-666.
26. Liu Y., Xu L., Zhu H. Liu SS-Y. Technical procedures for template-guided surgery for mandibular reconstruction based on digital design and manufacturing. Biomed Eng Online 2014, 13(1):63.
27. Chung K.J., Hong D.Y., Kim Y.T., et al. Preshaping plates for minimally invasive fixation of calcaneal fractures using a real-size 3D-printed model as a preoperative and intraoperative tool. Foot Ankle Int 2014, 35:1231-1236.
28. Singare S., Yaxiong L., Dichen L., et al. Fabrication of customised maxillo-facial prosthesis using computer-aided design and rapid prototyping techniques. Rapid Prototyping J 2006, 12(4):206-213.
29. Singare S., Dichen L., Bingheng L., et al. Design and fabrication of custom mandible titanium tray based on rapid prototyping. Med Eng Phys 2004, 26(8):671-676.
30. Parthasarathy J. 3D modeling, custom implants and its future perspectives in craniofacial surgery. Ann Maxillofac Surg 2014, 4(1):9-18.
31. Transplant jaw made by 3D printer claimed as first - BBC News 2015; Available from: . http://www.bbc.com/news/technology-16907104.
32. Vanhoenacker F.M., Van Hul W., Wuyts W., et al. Hereditary multiple exostoses: from genetics to clinical syndrome and complications. Eur J Radiol 2001, 40(3):208-217.
33. Mahaisavariya B., Sitthiseripratip K., Oris P., et al. Rapid prototyping model for surgical planning of corrective osteotomy for cubitus varus: Report of two cases. Inj Extra 2006, 37(5):176-180.
34. Imanishi J., Choong P.F.M. Three-dimensional printed calcaneal prosthesis following total calcanectomy. Int J Surg Case Rep 2015, 10:83-87.
35. Choong P.F., Qureshi A., Sim F.H., et al. Osteosarcoma of the foot: a review of 52 patients at the Mayo Clinic. Acta Orthop Scand 1999, 70(4):361-364.
36. Schmauss D., Haeberle S., Hagl C., et al. Three-dimensional printing in cardiac surgery and interventional cardiology: a single-centre experience. Eur J Cardio-Thoracic Surg 2014, 1-9.
37. Tam MDBS Laycock SD, Brown J.R.I., Jakeways M. 3D printing of an aortic aneurysm to facilitate decision making and device selection for endovascular aneurysm repair in complex neck anatomy. J Endovasc Ther 2013, 20:863-867.
38. Noecker A.M., Chen J.-F., Zhou Q., et al. Development of patient-specific three-dimensional pediatric cardiac models. American Soc Artif Intern Organs J 2006, 52(3):349-353.
39. Sodian R., Weber S., Markert M., et al. Pediatric cardiac transplantation: Three-dimensional printing of anatomic models for surgical planning of heart transplantation in patients with univentricular heart. J Thorac Cardiovasc Surg 2008, 136(4):1098-1099.
40. Brewster D.C., Cronenwett J.L., Hallett J.W., et al. Guidelines for the treatment of abdominal aortic aneurysms. Report of a subcommittee of the Joint Council of the American Association for Vascular Surgery and Society for Vascular Surgery. J Vasc Surg 2003, 37(5):1106-1117.
41. Schanzer A., Greenberg R.K., Hevelone N., et al. Predictors of abdominal aortic aneurysm sac enlargement after endovascular repair. Circulation 2011, 123(24):2848-2855.
42. Zein N.N., Hanouneh I.A., Bishop P.D., et al. Three-dimensional print of a liver for preoperative planning in living donor liver transplantation. Liver Transpl 2013, 19(12):1304-1310.
43. Vincent A., Herman J., Schulick R., et al. Pancreatic cancer. Lancet 2011, 378(9791):607-620.
44. Gillen S., Schuster T., Meyer Zum Büschenfelde C., et al. Preoperative/neoadjuvant therapy in pancreatic cancer: a systematic review and meta-analysis of response and resection percentages. PLoS Med 2010, 7(4):e1000267.
45. Schwaiger J., Kagerer M., Traeger M., et al. Manufacturing of patient-specific pancreas models for surgical resections. 2012 IEEE Int Conf Robot Biomimetics, ROBIO 2012 - Conf Dig 2012, 991-998.
46. Tiselius H.G., Ackermann D., Alken P., et al. Guidelines on urolithiasis. Eur Urol 2001, 40(4):362-371.
47. Zhang Y., Ge H.-W., Li N.-C., et al. Evaluation of three-dimensional printing for laparoscopic partial nephrectomy of renal tumors: a preliminary report. World J Urol 2015, 1-5.
48. De Coppi P., Bartsch G., Siddiqui M.M., et al. Isolation of amniotic stem cell lines with potential for therapy. Nat Biotechnol 2007, 25(1):100-106.
49. Skardala A., Macka D., Kapetanovicb E.d.i., et al. Amniotic fluid-derived stem cells accelerate healing of large skin wounds. Stem Cells Transl Med 2009, 27(5):417-428.
50. Cui X., Breitenkamp K., Finn M.G., et al. Direct human cartilage repair using three-dimensional bioprinting technology. Tissue Eng Part A 2012, 18(11-12):1304-1312.
51. Zopf D., Hollister S., Nelson M., et al. Bioresorbable airway splint created with a three-dimensional printer. N Engl J Med 2013, 368(21):2043-2045.
52. Practice M. The shape of things to come 3D printing in medicine 2015, 312(21):2213-2214.
53. Waran V., Narayanan V., Karuppiah R., et al. Neurosurgical endoscopic training via a realistic 3-dimensional model with pathology. Simul Healthc J Soc Simul Healthc 2015, 10(1):43-48.
54. Hayashi N., Kurimoto M., Hamada H., et al. Preparation of a simple and efficient laboratory model for training in neuroendoscopic procedures. Childs Nerv Syst 2008, 24(6):749-751.
55. Additive manufacturing: facts and forecasts - industry & automation - pictures of the future - innovation - home - Siemens Global Website 2015; Available from: . http://www.siemens.com/innovation/en/home/pictures-of-the-future/industry-and-automation/Additive-manufacturing-facts-and-forecasts.html.
56. Lambrecht J.T., Berndt D.C., Schumacher R., et al. Generation of three-dimensional prototype models based on cone beam computed tomography. Int J Comput Assist Radiol Surg 2009, 4:175-180.
57. 3D Printing in Medical and Dental Markets: An Opportunity Analysis and Ten-Year Forecast, Smartech; 2015. Available from: . http://smartechpublishing.com/reports/3d-printing-in-medical-and-dental-markets-an-opportunity-analysis-and-ten-y.
58. Watson R. A low-cost surgical application of additive fabrication. J Surg Educ 2014, 71(1):14-17.
59. MSD "bio-inks" deal to use 3D printed liver in toxicology studies; 2015. Available from: . http://www.outsourcing-pharma.com/Preclinical-Research/MSD-bio-inks-deal-to-use-3D-printed-liver-in-toxicology-studies.