Engineering properties of asphalt binders containing nanoclay and chemical warm-mix asphalt additives

Construction and Building Materials

Volumn 112, Issue , 2016, Pages 232-240

  Abdullah, Mohd Ezree ^a   Zamhari, Kemas Ahmad ^a   Hainin, Mohd Rosli ^b   Oluwasola, Ebenezer Akin ^b   Hassan, Norhidayah Abdul ^b   Yusoff, Nur Izzi Md ^c  

^a UNIVERSITI TUN HUSSEIN ONN MALAYSIA   (Malaysia)

^b UNIVERSITI TEKNOLOGI MALAYSIA   (Malaysia)

^c UNIVERSITI KEBANGSAAN MALAYSIA   (Malaysia)

Author keywords

Chemical additive; Fatigue; Green pavement; Nanoclay; Rutting; Warm mix asphalt

Indexed keywords

ADDITIVES; ASPHALT; BENDING TESTS; BINDERS; BINS; CHEMICAL MODIFICATION; CLAY MINERALS; CONCRETE INDUSTRY; DRIERS (MATERIALS); FATIGUE OF MATERIALS; FERROELECTRIC MATERIALS; NANOCOMPOSITES; NANOSTRUCTURED MATERIALS; PAVEMENTS; RHEOMETERS;

CHEMICAL ADDITIVE; GREEN PAVEMENTS; NANO CLAYS; RUTTING; WARM MIX ASPHALTS;

ASPHALT CONCRETE;

EID: 84960083041     PISSN: 09500618     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conbuildmat.2016.02.089     Document Type: Article

References (65)

1. Q. Ye, S. Wu, and N. Li Investigation of the dynamic and fatigue properties of fiber-modified asphalt mixtures Int. J. Fatigue 31 10 2009 1598 1602
2. S.G. Jahromi, and A. Khodaii Effects of nanoclay on rheological properties of bitumen binder Constr. Build. Mater. 23 8 2009 2894 2904
3. D. Whiteoak, J. Read, and R. Hunter The Shell Bitumen Handbook fifth ed. 2003 Thomas Telford Publishing London, UK
4. N.I.M. Yusoff, M.T. Shaw, and G.D. Airey Modelling the linear viscoelastic rheological properties of bituminous binders Constr. Build. Mater. 25 5 2011 2171 2189
5. G. Polacco, P. Kríz, S. Filippi, J. Stastna, D. Biondi, and L. Zanzotto Rheological properties of asphalt/SBS/clay blends Eur. Polymer J. 44 11 2008 3512 3521
6. S. Wu, Q. Ye, and N. Li Investigation of rheological and fatigue properties of asphalt mixtures containing polyester fibers Constr. Build. Mater. 22 10 2008 2111 2115
7. Y. Yildirim Polymer modified asphalt binders Constr. Build. Mater. 21 1 2007 66 72
8. X. Lu, and U. Isacsson Modification of road bitumens with thermoplastic polymers Polym. Testing 20 1 2000 77 86
9. G.D. Airey, M.H. Mohammed, and C. Fichter Rheological characteristics of synthetic road binders Fuel 87 10-11 2008 1763 1775
10. S.M. Abtahi, M. Sheikhzadeh, and S.M. Hejazi Fiber-reinforced asphalt-concrete - a review Constr. Build. Mater. 24 6 2010 871 877
11. M.C. Rubio, G. Martínez, L. Baena, and F. Moreno Warm mix asphalt: an overview J. Cleaner Prod. 24 2012 76 84
12. M.S. Sureshkumar, S. Filippi, G. Polacco, I. Kazatchkov, J. Stastna, and L. Zanzotto Internal structure and linear viscoelastic properties of EVA/asphalt nanocomposites Eur. Polymer J. 46 4 2010 621 633
13. D. Ghile, Effects of nanoclay modification on rheology of bitumen and on performance of asphalt mixtures Thesis M. Eng. Delft University of Technology, 2006.
14. G.C. Hurley, B.D. Prowell, Evaluation of Aspha-Min® Zeolite for Use in Warm-Mix Asphalt. National Center for Asphalt Technology (NCAT), Auburn, NCAT Report 05-04, 2005.
15. G.C. Hurley, B.D. Prowell, Evaluation of Evotherm® for Use in Warm-Mix Asphalt. National Center for Asphalt Technology (NCAT), Auburn, NCAT Report 06-02, 2006.
16. S.W. Goh, and Z. You Warm Mix Asphalt Using Sasobit in Cold Region 14th Conference on Cold Regions Engineering. August 31-September 2 2009 American Society of Civil Engineers Washington p. 288-298
17. F. Xiao, V.S. Punith, and S.N. Amirkhanian Effects of non-foaming WMA additives on asphalt binders at high performance temperatures Fuel 94 2012 144 155
18. A. Jamshidi, M.O. Hamzah, and Z. You Performance of warm mix asphalt containing sasobit®: state-of-the-art Constr. Build. Mater. 38 2013 530 553
19. S.S. Galooyak, B. Dabir, A.E. Nazarbeygi, and A. Moeini Rheological properties and storage stability of bitumen/SBS/montmorillonite composites Constr. Build. Mater. 24 3 2010 300 307
20. S.G. Jahromi, B. Andalibizade, and S. Vossough Engineering properties of nanoclay modified asphalt concrete mixtures Arabian J. Sci. Eng. 35 Number 1B 2010 89 103
21. Z. You, J. Mills-Beale, J.M. Foley, S. Roy, G.M. Odegard, Q. Dai, and S.W. Goh Nanoclay-modified asphalt materials: Preparation and characterization Constr. Build. Mater. 25 2 2011 1072 1078
22. A. Zare-Shahabadi, A. Shokuhfar, and S. Ebrahimi-Nejad Preparation and rheological characterization of asphalt binders reinforced with layered silicate nanoparticles Constr. Build. Mater. 24 7 2010 1239 1244
23. H. Yao, Z. You, L. Li, S.W. Goh, C.H. Lee, Y.K. Yap, and X. Shi Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy Constr. Build. Mater. 38 2013 327 337
24. H. Yao, Z. You, L. Li, X. Shi, S.W. Goh, J. Mills-Beale, and D. Wingard Performance of asphalt binder blended with non-modified and polymer-modified nanoclay Constr. Build. Mater. 35 2012 159 170
25. Standards & Industrial Research Institute of Malaysia (SIRIM), Specification For Penetration Grade of Bitumen For Use In Pavement Construction (First Revision), Kuala Lumpur, MS 124, 1996.
26. Asphalt Institute, SP-1 Superpave Performance Graded Asphalt Binder Specification and Testing, Lexington, 2003.
27. F. Xiao, S. Amirkhanian, and R. Zhang Influence of short-term aging on rheological characteristics of non-foaming WMA binders J. Perform. Constr. Facil. 26 2 2012 145 152
28. American Society for Testing and Materials (ASTM), Standard Test Method for Penetration of Bituminous Materials, New York, ASTM-D5, 2009.
29. American Society for Testing and Materials (ASTM), Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus), New York, ASTM-D36, 2009.
30. American Society for Testing and Materials (ASTM), Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer, New York, ASTM-D4402, 2002.
31. American Society for Testing and Materials (ASTM), Standard Specification for Type I Polymer Modified Asphalt Cement for Use in Pavement Construction, New York, ASTM-D5976, 2000.
32. ASTM-D2872, American Society for Testing and Materials, New York, Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test), 1997.
33. ASTM-D6521, American Society for Testing and Materials, New York, Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV), 2003.
34. ASTM-D7175, American Society for Testing and Materials, New York, Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR), 2005.
35. S. Biro, T. Gandhi, and S. Amirkhanian Determination of zero shear viscosity of warm asphalt binders Constr. Build. Mater. 23 5 2009 2080 2086
36. ASTM-D6373, American Society for Testing and Materials, New York, Standard specification for performance graded asphalt binder, 1999.
37. S. Aflaki, and M. Memarzadeh Using two-way ANOVA and hypothesis test in evaluating crumb rubber modification (CRM) agitation effects on rheological properties of bitumen Constr. Build. Mater. 25 4 2011 2094 2106
38. F. Xiao, and S.N. Amirkhanian Effects of liquid antistrip additives on rheology and moisture susceptibility of water bearing warm mixtures Constr. Build. Mater. 24 9 2010 1649 1655
39. Asphalt-Institute, Asphalt Institute. Lexington, USA, Superpave performance graded asphalt binder specification and testing, 2003.
40. T. Gandhi Effects of Warm Asphalt Additives on Asphalt Binder and Mixture Properties (Ph.D. thesis) 2008 Clemson University
41. American Society for Testing and Materials (ASTM), Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR), New York, ASTM-D6648, 2001.
42. Y. Tan, and M. Guo Using surface free energy method to study the cohesion and adhesion of asphalt mastic Constr. Build. Mater. 47 2013 254 260
43. A.E. Alvarez, E. Ovalles, and Epps. Martin A. Comparison of asphalt rubber-aggregate and polymer modified asphalt-aggregate systems in terms of surface free energy and energy indices Constr. Build. Mater. 35 2012 385 392
44. J. Howson, E. Masad, A. Bhasin, D. Little, and R. Lytton Comprehensive analysis of surface free energy of asphalts and aggregates and the effects of changes in pH Constr. Build. Mater. 25 5 2011 2554 2564
45. K. Kanitpong Evaluation of The Roles of Adhesion and Cohesion Properties of Asphalt Binders in Moisture Damage of HMA (Ph.D. thesis) 2005 University of Wisconsin-Madison
46. D.N. Little, A. Bhasin, Using Surface Energy Measurements to Select Materials for Asphalt Pavement. National Cooperative Highway Research Program (NCHRP), Transportation Research Board (TRB), Washington, NCHRP Web-Only Document 104, 2006.
47. S.I. Sarsam, and E.T. AL-Azawee Assessment of asphalt binder stripping using surface free energy Res. Appl. Mater. 1 3 2013 27 30
48. Z. Ali, H.H. Le, S. Ilisch, T. Thurn-Albrecht, and H.J. Radusch Morphology development and compatibilization effect in nanoclay filled rubber blends Polymer 51 20 2010 4580 4588
49. N.M. Wasiuddin Effect of Additives on Surface Free Energy Characteristics of Aggregates and Binders in Hot Mix Asphalt (Ph.D. thesis) 2010 The University of Oklahoma
50. N. Wasiuddin, H. Barraza, M. Zaman, and E. O'Rear Assessment of surface free energy characteristics of performance graded asphalt binders Geo-Frontiers Congress 2005. January 24-26 2005 American Society of Civil Engineers Washington p. 1-13
51. N.M. Wasiuddin Effect of Additives on Surface Free Energy Characteristics of Aggregates and Binders in Hot Mix Asphalt (Ph.D. thesis) 2007 University of Oklahoma
52. F.L. Roberts, P.S. Kandhal, E.R. Brown, D.Y. Lee, and T.W. Kennedy Hot Mix Asphalt Materials Mixture Design and Construction third ed. 1996 NAPA Research & Education Foundation Lanham, Maryland
53. Y. Tasdemir High temperature properties of wax modified binders and asphalt mixtures Constr. Build. Mater. 23 10 2009 3220 3224
54. S.J. Lee, S.N. Amirkhanian, N.W. Park, and K.W. Kim Characterization of warm mix asphalt binders containing artificially long-term aged binders Constr. Build. Mater. 23 6 2009 2371 2379
55. nd PIARC World Road Congress. October 19-25 2003 World Road Association - PIARC Durban p. 11
56. M.W. Witczak, K. Kaloush, T. Pellinen, M. El-Basyouny, H. Von-Quintus, Simple Performance Test for Superpave Mix Design. National Cooperative Highway Research Program (NCHRP), Transportation Research Board (TRB), Washington, NCHRP Report 465, 2002.
57. S.W. Goh Development and Improvement of Warm-Mix Asphalt (WMA) Technology (Ph.D. thesis) 2011 Michigan Technological University
58. Z. You, S.W. Goh, Q. Dai, Laboratory Evaluation of Warm Mix Asphalt. Michigan Department of Transportation, Michigan Technological University, Houghton, Final Report for Project No. RC-1556, 2011.
59. F. Xiao, A.N. Amirkhanian, and S.N. Amirkhanian Influence of carbon nanoparticles on the rheological characteristics of short-term aged asphalt binders J. Mater. Civ. Eng. 23 4 2011 423 431
60. D.A. Anderson, D.W. Christensen, H.U. Bahia, R. Dongre, M.G. Sharma, C.E. Antle, J. Button, Binder characterization and evaluation: Physical characterization. National Research Council, Strategic Highway Research Program (SHRP), Washington DC, Report SHRP-A-369, 1994.
61. J.Y. Yu, P.C. Feng, H.L. Zhang, and S.P. Wu Effect of organo-montmorillonite on aging properties of asphalt Constr. Build. Mater. 23 7 2009 2636 2640
62. J.D. Miller, S. Veeramasuneni, J. Drelich, M.R. Yalamanchili, and G. Yamauchi Effect of roughness as determined by atomic force microscopy on the wetting properties of PTFE thin films Polym. Eng. Sci. 36 14 1996 1849 1855
63. E.A. Oluwasola, M.R. Hainin, and A.A. Maniruzzaman Evaluation of asphalt mixtures incorporating electric arc furnace steel slag and copper mine tailings for road construction Transp. Geotech. 2 2015 47 55
64. Z. Sufian, N.A. Aziz, M.Y. Matori, M.Z. Hussain, M.R. Hainin, and E.A. Oluwasola Influence of active filler, curing time and moisture content on the strength properties of emulsion and foamed bitumen stabilized mix Jurnal Teknologi 70 4 2014 135 141
65. E.A. Oluwasola, M.R. Hainin, and Md. Maniruzzaman A.A Evaluation of rutting potential and skid resistance of hot mix asphalt incorporating electric arc furnace steel slag and copper mine tailings Indian J. Eng. Mater. Sci. 22 2015 550 558