Design method of high performance precast external walls for warm climate by multi-objective optimization analysis

Energy

Volumn 90, Issue , 2015, Pages 1645-1661

  Baglivo, Cristina ^a   Congedo, Paolo Maria ^a  

^a UNIVERSITY OF SALENTO   (Italy)

Author keywords

Envelope; Optimization; Precast; Sustainability; Thickness; ZEB

Indexed keywords

CONSTRUCTION INDUSTRY; ENERGY EFFICIENCY; ENERGY UTILIZATION; ENVIRONMENTAL PROTECTION; GAS EMISSIONS; GREENHOUSE GASES; INSULATING MATERIALS; MULTIOBJECTIVE OPTIMIZATION; OPTIMIZATION; SPECIFIC HEAT; SUSTAINABLE DEVELOPMENT; WALLS (STRUCTURAL PARTITIONS);

COMPUTATIONAL PROCEDURES; ENVELOPE; ENVIRONMENTAL AWARENESS; GLOBAL ENVIRONMENTAL PROBLEMS; MULTI CRITERIA ANALYSIS; PRE-CAST; REDUCE ENERGY CONSUMPTION; THICKNESS;

ZERO ENERGY BUILDINGS;

BUILDING CONSTRUCTION; CLIMATE CONDITIONS; DESIGN METHOD; GREENHOUSE GAS; HEAT CAPACITY; OPTIMIZATION; PERFORMANCE ASSESSMENT; SUSTAINABILITY;

EID: 84959374045     PISSN: 03605442     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.energy.2015.06.132     Document Type: Article

References (40)

1. Ruamsuke Kawin, Dhakal Shobhakar, Marpaung Charles OP. Energy and economic impacts of the global climate change policy on Southeast Asian countries: a general equilibrium analysis. Energy 2015;81:446-61.
2. Li Danny HW, Yang Liu, Lam Joseph C. Impact of climate change on energy use in the built environment in different climate zones e a review. Energy June 2012;42(1):103-12. http://dx.doi.org/10.1016/j.energy.2012.03.044. ISSN 0360-5442.
3. Altan Dombayci Ö, Gölcü Mustafa, Pancar Yaşar. Optimization of insulation thickness for external walls using different energy-sources. Appl Energy September 2006;3(9):921-8. http://dx.doi.org/10.1016/j.apenergy.2005. 10.006. ISSN 0306-2619.
4. Franzitta Vincenzo, La Gennusa Maria, Peri Giorgia, Rizzo Gianfranco, Scaccianoce Gianluca. Toward a European eco-label brand for residential buildings: holistic or by-components approaches? Energy April 2011;36(4):1884-92. http://dx.doi.org/10.1016/j.energy.2010.09.021. ISSN 0360-5442.
5. Dirks James A, Gorrissen Willy J, Hathaway John H, Skorski Daniel C, Scott Michael J, Pulsipher Trenton C, et al. Impacts of climate change on energy consumption and peak demand in buildings: a detailed regional approach. Energy January 2015;79(1):20-32. http://dx.doi.org/10.1016/j.energy. 2014.08.081. ISSN 0360-5442.
6. Karimpour Mahsa, Belusko Martin, Xing Ke, Boland John, Bruno Frank. Impact of climate change on the design of energy efficient residential building envelopes. Energy Build January 2015;87(1):2-154. http://dx.doi.org/10.1016/j.enbuild.2014.10.064. ISSN 0378-7788.
7. Castro-Lacouture Daniel, Sefair Jorge A, Flórez Laura, Medaglia Andrés L. Optimization model for the selection of materials using a LEED-based green building rating system in Colombia. Build Environ June 2009;44(6): 1162-70. http://dx.doi.org/10.1016/j.buildenv.2008.08.009. ISSN 0360-1323.
8. Silva Pedro CP, Almeida Manuela, Bragança Luís, Mesquita Vasco. Development of prefabricated retrofit module towards nearly zero energy buildings. Energy Build January 2013;56:115-25. http://dx.doi.org/10.1016/j.enbuild.2012.09.034. ISSN 0378-7788.
9. Baglivo Cristina, Congedo Paolo Maria, D'Agostino Delia, Zacá Ilaria. Cost-Optimal analysis and technical comparison between standard and high efficient mono-residential buildings in a warm climate. Energy 2015;83:560-75. http://dx.doi.org/10.1016/j.energy.2015.02.062.
10. Ilaria Zacá, Delia D'Agostino, Paolo Maria Congedo, Cristina Baglivo. Assessment of cost-optimality and technical solutions in high performance multiresidential buildings in the mediterranean area. Energy Build. http://dx.doi. org/10.1016/j.enbuild.2015.04.038.
11. Zacá Ilaria, D'Agostino Delia, Congedo Paolo Maria, Baglivo Cristina. Data of cost-optimality and technical solutions for high energy performance buildings in warm climate. Data Brief 12 June 2015. http://dx.doi.org/10.1016/j.dib.2015.05.015. Available online, ISSN 2352-3409.
12. Li Zhengdao, Shen Geoffrey Qiping, Xue Xiaolong. Critical review of the research on the management of prefabricated construction. Habitat Int July 2014;43:0-249. http://dx.doi.org/10.1016/j.habitatint.2014.04.001. ISSN 0197-3975.
13. Jaillon Lara, Poon CS. The evolution of prefabricated residential building systems in Hong Kong: a review of the public and the private sector. Automat Constr May 2009;18(3):239-48. http://dx.doi.org/10.1016/j.autcon.2008. 09.002. ISSN 0926-5805.
14. Tam Vivian WY, Tam CM, Zeng SX, Ng William CY. Towards adoption of prefabrication in construction. Build Environ October 2007;42(10):3642-54. http://dx.doi.org/10.1016/j.buildenv.2006.10.003. ISSN 0360-1323.
15. Ho OST. Construction waste management e a contractor's perspective. The Hong Kong Institute of Builders; 2001, July. p. 8-11.
16. Ting YH. The economic implications of subcontracting practice on building prefabrication. Automat Constr 1997;6(3):163-74.
17. CIRIA. Adding value to construction projects through standardisation and preassembly. compiled by Gibb, A.G.F., Groa∩k, S., Neale, R.H. and Sparksman, W.G., Report R176. London: Construction Industry Research and Information Association; 1999., http://products.ihs.com/cis/Doc.aspx?AuthCode=&Doc Num=247541.
18. TestaC. The industrialisation of building. NewYork:VanNostrandReinhold; 1972.
19. Gibb AGF. Off-site fabrication: prefabrication, pre-assembly and modularization. Latheronwheel: Whittles Publishing; 1999.
20. Richard R-B. Industrialised building systems: reproduction before automation and robotics. Automat Constr 2005;14(4):442-51.
21. Byoung-Jun Lee, Stephen Pessiki. Thermal performance evaluation of precast concrete three-wythe sandwich wall panels.
22. Lu Ayea, T. Ngoa, R.H. Crawfordb, R. Gammampilaa, P. Mendisa. Life cycle greenhouse gas emissions and energy analysis of prefabricated reusable building modules.
23. Linee guida per la progettazione con i protocolli di sostenibilitá LEED e ITACAVersione 1.3-Gennaio. 2013. www.anit.it.
24. Dall'O' G, Galante A, Sanna N, Miller K. On the integration of leadership in energy and environmental design (LEED)® ND protocol with the energy planning and management tools in Italy: strengths and weaknesses. Energies 2013;6(11):5990-6015. http://dx.doi.org/10.3390/en6115990. ISSN 1996-1073.
25. Ibrahim Mohamad, Biwole Pascal Henry, Wurtz Etienne, Achard Patrick. A study on the thermal performance of exterior walls covered with a recently patented silica-aerogel-based insulating coating. Build Environ November 2014;81:112-22. http://dx.doi.org/10.1016/j.buildenv.2014.06.017. ISSN 0360-1323.
26. Baglivo Cristina, Congedo Paolo Maria, Fazio Andrea, Laforgia Domenico. Multi-objective optimization analysis for high efficiency external walls of zero energy buildings (ZEB) in the Mediterranean climate. Energy Build December 2014;84:483-92. http://dx.doi.org/10.1016/j.enbuild.2014.08.043. ISSN 0378-7788.
27. Baglivo Cristina, Congedo Paolo Maria, Fazio Andrea. Multi-criteria optimization analysis of external walls according to ITACA protocol for zero energy buildings in the Mediterranean climate. Build Environ December 2014;82:467-80. http://dx.doi.org/10.1016/j.buildenv.2014.09.019. ISSN 0360-1323.
28. Sambou V, Lartigue B, Monchoux F, Adj M. Thermal optimization of multilayered walls using genetic algorithms. Energy Build October 2009;41(10):1031-6. http://dx.doi.org/10.1016/j.enbuild.2009.05.007. ISSN 0378-7788.
29. Di Perna C, Stazi F, Ursini Casalena A, D'Orazio M. Influence of the internal inertia of the building envelope on summertime comfort in buildings with high internal heat loads. Energy Build January 2011;43(1):200-6. http://dx.doi.org/10.1016/j.enbuild.2010.09.007. ISSN 0378-7788.
30. Aste Niccoló, Angelotti Adriana, Buzzetti Michela. The influence of the external walls thermal inertia on the energy performance of well insulated buildings. Energy Build November 2009;41(11):1181-7. http://dx.doi.org/10.1016/j.enbuild.2009.06.005. ISSN 0378-7788.
31. Daouas Naouel. A study on optimum insulation thickness in walls and energy savings in Tunisian buildings based on analytical calculation of cooling and heating transmission loads. Appl Energy January 2011;88(1):156-64. http://dx.doi.org/10.1016/j.apenergy.2010.07.030. ISSN 0306-2619.
32. D'Agostino D, Congedo PM. CFD modeling and moisture dynamics implications of ventilation scenarios in historical buildings. Build Environ 2014;79: 181-93.
33. Sartori Igor, Napolitano Assunta, Voss Karsten. Net zero energy buildings: a consistent definition framework. Energy Build May 2012;48:20-232. http://dx.doi.org/10.1016/j.enbuild.2012.01.032. ISSN 0378-7788.
34. Congedo PM, Conterio B. Edifici a consumo quasi zero per regioni calde. Impianti Build Settembre 2013;103:11-6. Tecnedit Edizioni, Italy.
35. Al-Sanea Sami A, Zedan MF, Al-Hussain SN. Effect of thermal mass on performance of insulated building walls and the concept of energy savings potential. Appl Energy January 2012;89(1):430-42. http://dx.doi.org/10.1016/j.apenergy.2011.08.009. ISSN 0306-2619.
36. European norm EN ISO 13786. Thermal performance of building components, dynamic thermal characteristics, calculation methods. 2008.
37. Kontoleon KJ, Theodosiou ThG, Tsikaloudaki KG. The influence of concrete density and conductivity on walls' thermal inertia parameters under a variety of masonry and insulation placements. Appl Energy December 2013;112:325-37. http://dx.doi.org/10.1016/j.apenergy.2013.06.029. ISSN 0306-2619.
38. Al-Sanea Sami A, Zedan MF. Effect of thermal bridges on transmission loads and thermal resistance of building walls under dynamic conditions. Appl Energy October 2012;98:584-93. http://dx.doi.org/10.1016/j.apenergy.2012. 04.038. ISSN 0306-2619.
39. Asdrubali Francesco, Baldinelli Giorgio, Bianchi Francesco. A quantitative methodology to evaluate thermal bridges in buildings. Appl Energy September 2012;97:365-73. http://dx.doi.org/10.1016/j.apenergy.2011.12. 054. ISSN 0306-2619.
40. Karlsson Jonathan, Wadsö Lars, öberg Mats. A conceptual model that simulates the influence of thermal inertia in building structures. Energy Build May 2013;60:146-51. http://dx.doi.org/10.1016/j.enbuild.2013.01.017. ISSN 0378-7788.