Optimization for a three-stage production system in the Internet of Things: procurement, production and product recovery, and acquisition

International Journal of Advanced Manufacturing Technology

Volumn 83, Issue 5-8, 2016, Pages 689-710

  Fang, Chang ^a,b,c   Liu, Xinbao ^a,c   Pardalos, Panos M ^b   Pei, Jun ^a,b,c  

^a HEFEI UNIVERSITY OF TECHNOLOGY   (China)

^b J Crayton Pruitt Family Department of Biomedical Engineering   (United States)

^c BEIJING UNIVERSITY OF POSTS AND TELECOMMUNICATIONS   (China)

Author keywords

Internet of Things; Procurement; Product recovery; Return acquisition; Value deterioration

Indexed keywords

DETERIORATION; ECONOMICS; HEURISTIC METHODS; INTERNET; INTERNET OF THINGS; NUMERICAL METHODS; OPTIMIZATION; PARTICLE SWARM OPTIMIZATION (PSO); RECOVERY; SENSITIVITY ANALYSIS; SUPPLY CHAINS; UNCERTAINTY ANALYSIS;

ADVANCED MANUFACTURING; INTERNET OF THING (IOT); PARTICLE SWARM OPTIMIZATION ALGORITHM; PROCUREMENT; PRODUCT LIFE CYCLES; PRODUCT RECOVERY; PRODUCTION SYSTEM; RETURN ACQUISITION;

LIFE CYCLE;

EID: 84959161242     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-015-7593-1     Document Type: Article

References (75)

1. Neto JQF, Walther G, Bloemhof J, van Nunen JAEE, Spengler T (2010) From closed-loop to sustainable supply chains: the WEEE case. Int J Prod Res 48(15):4463–4481
2. Savage M (2005) Implementation of waste electric and electronic equipment directive in EU 25. Technical report, European Commission, Joint Research Centre
3. Sarma S, Brock DL, Ashton K (2000) The networked physical world. TR MIT-AUTOID-WH-001, MIT Auto-ID Center
4. Gubbi J, Buyya R, Marusic S (2013) Palaniswami M (2013) internet of things (IoT): a vision, architectural elements, and future directions. Futur Gener Comput Syst 29:1645–1660
5. Kiritsis D (2011) Closed-loop PLM for intelligent products in the ear of the internet of things. Comput Aided Des 43(5):479–501
6. Robotis A, Bhattacharya S, Van Wassenhove LN (2005) The effect of remanufacturing on procurement decisions for resells in secondary markets. Eur J Oper Res 163(3):688–705
7. Zhou W, Piramuthu S (2013) Remanufacturing with PFID item-level information: optimization, waste reduction and quality improvement. Int J Prod Econ 145(2):647–657
8. Lu DX (2011) Information architecture for supply chain quality management. Int J Prod Res 49(1):183–198
9. Jammes F, Smit H (2005) Service-oriented paradigms in industrial automation. IEEE T Ind Inform 1(1):62–70
10. Tao F, Cheng Y, Xu LD, Zhang L, Li BH (2014) CCIoT-CMfg: cloud computing and internet of things-based cloud manufacturing service system. IEEE T Ind Inform 10(2):1435–1442
11. Guide VDR, Daniel R, Souza GC, Van Wassenhove LN et al (2006) Time value of commercial production returns. Manag Sci 52(8):1200–1214
12. Guide VDR, Van Wassenhove LN (2009) The evolution of closed-loop supply chain research. Oper Res 57(1):10–18
13. Bai H (2009) Reverse supply chains coordination and design for profitable returns: an example of ink cartridge. Master Thesis, Worcester Polytechnic Institute
14. Anderson CR, Zeithaml CP (1984) Stage of the product life cycle, business strategy, and business performance. Acad Manag J 27(1):5–24
15. van der Laan E, Salomon M (1997) Production planning and inventory control with remanufacturing and disposal. Eur J Oper Res 102(2):264–278
16. Kurkin O, Januska M (2010) Product life cycle in digital factory. In Knowledge management and innovation: a business competitive edge perspective. 15th International Business Information Management Association, Cairo, Egypt, Nov 06–07, ISBN: 978-0-9821489-4-5, pp 1881–1886
17. Prince M, Smith JC, Geunes J (2014) A three-stage procurement optimization problem under uncertainty. Nav Res Logist 60(5):395–412
18. Chen K (2012) Procurement strategy and coordination mechanism of the supply chain with one manufacturer and multiple suppliers. Int J Prod Econ 138(1):125–135
19. Goyal SK, Deshmukh SG (1992) Integrated procurement production systems—a review. Eur J Oper Res 62(1):1–10
20. Guide VDR, Van Wassenhove LN (2001) Managing product returns for remanufacturing. Prod Oper Manag 10(2):142–155
21. Guide VDR, Jayaraman V (2000) Production acquisition management: current industry practice and a proposed framework. Int J Prod Res 38(16):3779–3800
22. Mukhopadhyay SK, Ma H (2009) Joint procurement and production decisions in remanufacturing under quality and demand uncertainty. Int J Prod Econ 120(1):5–17
23. Li X, Li YJ, Saghafian S (2013) A hybrid manufacturing/remanufacturing system with random remanufacturing yield and marked-driven product acquisition. IEEE T Eng Manag 60(2):424–437
24. Minner S, Kiesmuller GP (2012) Dynamic product acquisition in closed loop supply chains. Int J Prod Res 50(11):2836–2851
25. Niknejad A, Petrovic D (2014) Optimization of integrated reverse logistics networks with different product recovery routes. Eur J Oper Res 238(1):143–154
26. Ondemir O, Ilgin MA, Gupta SM (2012) Optimal end-of-life management in closed-loop supply chains using RFID and sensors. IEEE T Ind Inform 8(3):719–728
27. Baki MF, Chaouch BA, Abdul-Kader W (2014) A heuristic procedure for the dynamic lot sizing problem with remanufacturing and product recovery. Comput Oper Res 43:225–236
28. Ilgin MA, Gupta SM (2010) Environmental conscious manufacturing and product recovery (ECMPRO): a review of the state of the art. J Environ Manag 91(3):563–591
29. Gungor A, Gupta SM (1999) Issues in environmental conscious manufacturing and product recovery: a survey. Comput Ind Eng 36(4):811–853
30. Fu Q, Lee CY, Teo CP (2010) Procurement management using option contracts: random spot price and the portfolio effect. IIE Trans 43(11):793–811
31. Xu H (2010) Managing production and procurement through option contracts in supply chains with random yield. Int J Prod Econ 126(2):306–131
32. Yu MC, Goh M, Lin HC (2012) Fuzzy multi-objective vendor selection under lean procurement. Euro J Oper Res 219(2):305–311
33. Kim SH, Netessine S (2013) Collaborative cost reduction and component procurement under information asymmetry. Manag Sci 59(1):189–206
34. Das BC, Das B, Mondal SK (2013) Integrated supply chains model for a deteriorating item with procurement cost dependent credit period. Comput Ind Eng 64(3):788–796
35. Hu F, Lim CC, Lu Z (2014) Optimal production and procurement decisions in a supply chain with an option contract and partial backordering under uncertainties. Appl Math Comput 232(1):1225–1234
36. Galbreth MR, Blackburn JD (2006) Optimal acquisition and sorting policies for remanufacturing. Prod Oper Manag 15(3):384–392
37. Vadde S, Kamarthi SV, Gupta SM (2007) Optimal pricing of reusable and recyclable components under alternative product acquisition mechanisms. Int J Prod Res 45(18–19):4621–4652
38. Teunter RH, Flapper SDP (2011) Optimal core acquisition and remanufacturing policies under uncertain core quality fractions. Eur J Oper Res 210(2):241–248
39. Zhou SX, Yu Y (2011) Optimal product acquisition, pricing, and inventory management for systems with remanufacturing. Oper Res 59(2):514–521
40. Kleber R, Schulz T, Voigt G (2012) Dynamic buy-back for product recovery in end of life spare parts procurement. Int J Prod Res 50(6):1476–1488
41. Zeng AZ (2013) Coordination mechanisms for a three-stage reverse supply chain to increase profitable returns. Nav Res Logist 60(1):32–45
42. Inderfurth K, Kleber R (2013) An advanced heuristic for multiple-option space parts procurement after end-of-production. Prod Oper Manag 22(1):54–70
43. Konstantaras I, Skouri K (2010) Lot sizing for a single product recovery system with variable setup numbers. Eur J Oper Res 203(2):326–335
44. Vadde S, Zeid A, Kamarthi SV (2011) Pricing decisions in a multi-criteria setting for product recovery facilities. Omega-Int J Manag S 39(2):186–193
45. Kim T, Goyal SK (2011) Determination of the optimal production policy and product recovery policy: the impacts of sales margin of recovered product. Int J Prod Res 49(9):2535–2550
46. Ondemir O, Gupta SM (2014) Quality management in product recovery using the internet of things: an optimization approach. Comput Ind 65(3):491–504
47. Miorandi D, Sicari S, Pellegrini FD, Chlamtac I (2012) Internet of things: vision, applications and research challenges. Ad Hoc Netw 10(7):1497–1516
48. Yang L, Yang SH, Plotnick L (2013) How the internet of things technology enhances emergency response operations. Technol Forecast Soc 80(9):1854–1867
49. Zhang L, Luo Y, Tao F et al (2014) Cloud manufacturing: a new manufacturing paradigm. Enterp Inf Syst-UK 8(2):167–187
50. Sung WT, Chiang YC (2012) Improved particle swarm optimization algorithm for android medical care IOT using modified parameters. J Med Syst 36(6):3755–3763
51. Li HS, Dimitrovski A, Song JB, Han Z, Qian LJ (2014) Communication infrastructure design in cyber physical systems with applications in smart grids: a hybrid system framework. IEEE Commun Surv Tutorials 16(3):1689–1708
52. Jun HB, Shin JH, Kiritsis D, Xirouchakis P (2007) System architecture for closed-loop PLM. Int J Comput Integ Matuf 20(7):684–698
53. Jun HB, Kiritsis D, Xirouchakis P (2007) Research issues on closed-loop PLM. Comput Ind 58(8–9):855–868
54. Yang XY, Moore P, Chong SK (2009) Intelligent products: from lifecycle data acquisition to enabling product related services. Comput Ind 60(3):184–194
55. Luttropp C, Johansson J (2010) Improved recycling with life cycle information tagged to the product. J Clean Prod 18(4):346–354
56. Parlikad AK, McFarlane D (2007) RFID-based production information in end-of-life decision making. Control Eng Pract 15(11):1348–1363
57. Nawa K, Chandrasiri NP, Yannagihara T, Oguchi K (2014) Cyber physical system for vehicle application. T I Meas Control 36(7):898–905
58. Wan JF, Zhang DQ, Zhao SJ, Yang LT, Lloret J (2014) Context-aware vehicular cyber-physical systems with cloud support: architecture, challenges, and solutions. IEEE Commun Mag 52(8):106–113
59. Jia DY, Lu KJ, Wang JP (2014) On the network connectivity of platoon-based vehicular cyber-physical systems. Transp Res C-Emer 40:215–230
60. Facchinetti T, Della Vedova ML (2011) Real-time modeling for direct load control in cyber-physical power systems. IEEE T Ind Inform 7(4):689–698
61. Li HS, Lai LF, Poor HV (2012) Multicast routing for decentralized control of cyber physical systems with an application in smart grid. IEEE J Sel Areas Commun 30(6):1097–1107
62. Li L, Li S, Zhao S (2014) QoS-aware scheduling of service-oriented internet of things. IEEE T Ind Inform 10(2):1497–1505
63. Haque SA, Aziz SM, Rahman M (2014) Review of cyber-physical system in healthcare. Int J Distrib Sens Netw 2014:1–20
64. Kagermann H, Wolfgang W, Helbi J (2013) Recommendations for implementing the strategic initiative INDUSTRIE 4.0. http://www.plattform-i40.de/finalreport2013
65. Leber J (2012) General electric pitches an industrial internet. MIT Technology Review. http://www.technologyreview.com
66. Evans PC, Annunziata M (2012) Industrial internet: pushing the boundaries of minds and machines. http://files.gereports.com/wp-content/uploads/2012/11/ge-industrial-internet-vision-paper.pdf
67. Zolfagharinia H, Hafezi M, Farahani RZ, Fahimnia B (2014) A hybrid two-stock inventory control model for a reverse supply chain. Transp Res E-Log 67:141–161
68. Blackburn JD, Guide VDR, Souza GC, Van Wassenhove LN (2004) Reverse supply chains for commercial returns. Calif Manag Rev 46(2):6–22
69. Jayaraman V (2006) Production planning for closed-loop supply chains with product recovery and reuse: an analytical approach. Int J Prod Res 44(5):981–998
70. Kumar M, Husian M, Upreti N, Gupta D (2010) Genetic algorithm: review and application. Int J Inform Tech Knowl Manag 2(2):451–454
71. Dorigo M, Blum C (2005) Ant colony optimization theory: a survey. Theor Comput Sci 344:243–278
72. Suman B, Kumar P (2006) A survey of simulated annealing as a tool for single and multiobjective optimization. J Oper Res Soc 57:1143–1160
73. Banks A, Vincent J, Anyakoha C (2008) A review of particle swarm optimization. Part II: hybridization, combinatorial, multicriteria and constrained optimization, and indicative applications. Nat Comput 7(1):109–124
74. Kennedy J, Eberhart RC (1997) A discrete binary version of the particle swarm algorithm. Proceedings of the International Conference on System, Man and Cybernetics, October 12–15, Florida, USA, Piscataway, NJ: IEEE Service Centre: 4104–4109
75. Eberhart RC, Shi Y (1998) Comparison between genetic algorithms and particle swarm optimization. Proceedings of the 7th Annual Conference on Evolutionary Programming, Springer, Berlin, Germany, pp 611–616