Brittle-ductile shear zones along inversion-related frontal and oblique thrust ramps: Insights from the Central-Northern Apennines curved thrust system (Italy)

Ductile Shear Zones: From Micro- to Macro-scales

Volumn , Issue , 2015, Pages 111-127

  Pace, Paolo ^a   Calamita, Fernando ^a   Tavarnelli, Enrico ^b  

^a UNIVERSITY OF CHIETI   (Italy)

^b UNIVERSITY OF SIENA   (Italy)

Author keywords

Central Northern Apennines; Inversion tectonics; S fabric; S C fabric; Thrust related shear zones

Indexed keywords

FAULTING; VORTICITY;

DUCTILE SHEAR ZONE; FLANKING STRUCTURES; INVERSION STRUCTURES; INVERSION TECTONICS; NORTHERN APENNINES; SHEAR ZONE; STRUCTURAL CHARACTERIZATION; STRUCTURAL INHERITANCE;

SHEAR DEFORMATION;

EID: 84957945148     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118844953.ch8     Document Type: Chapter

References (131)

1. Alberti M, Decandia FA, Tavarnelli E. 1996. Modes of propagation of the compressional deformation in the Umbria-Marche Apennines. Memorie della Società Geologica Italiana 51, 71-82.
2. Alfonsi L. 1995. Wrench tectonics in Central Italy, a segment of the Sabina Fault. Bollettino della Società Geologica Italiana 114, 411-421.
3. Alsop GI. 1991. Gravitational collapse and extension along a midcrustal detachment: the Lough Derg Slide, northwest Ireland. Geological Magazine 128, 345-354.
4. Alsop GI, Holdsworth RE. 2004. Shear zones-an introduction and overview. In Flow Processes in Faults and Shear Zones, edited by G.I. Alsop, R.E. Holdsworth, K.J.W. McCaffrey, and M. Hand, Geological Society of London Special Publications, London.
5. Alsop GI, Holdsworth RE, McCaffrey KJW, Hand M. 2004. Flow Processes in Faults and Shear Zones. Geological Society of London Special Publications, London, pp. 1-10.
6. Alvarez W. 1990. Pattern of extensional faulting in pelagic carbonates of the Umbria-Marche Apennines of central Italy. Geology 18, 407-410.
7. Alvarez W, Engelder T, Lowrie W. 1976. Formation of spaced cleavage and folds in brittle limestones by dissolution. Geology 4, 698-701.
8. Barchi MR, Lemmi M. 1996. Geologia dell'area del M.Coscerno-M. di Civitella (Umbria sud-orientale). Bollettino della Società Geologica Italiana 115, 601-624.
9. Berthé D, Choukroune P, Jegouzo P. 1979a. Orthogneiss, mylonite and non-coaxial deformation of granites: the example of the South Armorican shear zone. Journal of Structural Geology 1, 31-42.
10. Berthé D, Choukroune P, Gapais D. 1979b. Orientations préférentielles du quartz et orthogneissification progressive en régime cisaillant: l'exemple du cisaillement sudarmoricain. Bulletin de Minéralogie 102, 265-272.
11. Blenkinsop TG, Treloar PJ. 1995. Geometry, classification and kinematics of S-C and S-C' fabrics in the Mushandike area, Zimbabwe. Journal of Structural Geology 17, 397-408.
12. Bigi S. 2006. An example of inversion in a brittle shear zone. Journal of Structural Geology 28, 431-443.
13. Boccaletti M, Calamita F, Deiana G, et al. 1990. Migrating foredeep thrust belt systems in the northern Apennines and southern Alps. Palaeogeography, Palaeoclimatology, Palaeoecology 77, 41-50.
14. Boccaletti M, Calamita F, Viandante MG. 2005. La Neo-Catena litosferica appenninica nata a partire dal Pliocene inferiore come espressione della convergenza Africa-Europa. Bollettino della Società Geologica Italiana 124, 87-105.
15. Bosellini A. 2004. The western passive margin of Adria and its carbonate platforms. In The Geology of Italy, edited by U. Crescenti, S. S. D'Offizi, Merlini, and R. Sacchi, Società Geologica Italiana, Italy, Special Volume 1, pp. 79-92.
16. Butler RWH. 1989. The influence of pre-existing basins structure on thrust system evolution in the western Alps. In Inversion Tectonics, edited by M. Cooper and G.D. Williams, Geological Society of London Special Publications, vol. 44, Geological Society of London, London, pp. 105-122.
17. Butler RWH. 1992. Thrust zone kinematics in a basement-cover imbricate stack: Eastern Pelvoux massif, French Alps. Journal of Structural Geology 14, 29-40.
18. Butler RWH, Tavarnelli E, Grasso M. 2006. Structural inheritance in mountain belts: An Alpine-Apennine perspective. Journal of Structural Geology 28, 1893-1908.
19. Calamita F. 1990. Thrusts and fold-related structures in the Umbria- Marche Apennines (Central Italy). Annales Tectonicae 4, 83-117.
20. Calamita F. 1991. Extensional mesostructures in thrust shear zones: examples from the Umbro-Marchean Apennines. Bollettino della Società Geologica Italiana 110, 649-660.
21. Calamita F, Deiana G. 1988. The arcuate shape of the Umbria- Marche-Sabina Apennines (Central Italy). Tectonophysics 146, 139-147.
22. Calamita F, Deiana G, Invernizzi C, Mastrovincenzo S. 1987. Analisi strutturale della linea "Ancona-Anzio Auctorum" tra Cittareale e Micigliano (Rieti). Bollettino della Società Geologica Italiana 106, 365-375.
23. Calamita F, Decandia FA, Deiana G, Fiori AP. 1991. Deformation of S-C tectonites in the Scaglia Cinerea Formation in the Spoleto area (South-East Umbria): Bollettino della Società Geologica Italiana 110, 661-665.
24. Calamita F, Pizzi A, Ridolfi M, Rusciadelli G, Scisciani V. 1998. Il buttressing delle faglie sinsedimentarie pre-thrusting sulla strutturazione neogenica della catena appenninica: l'esempio della M.gna dei Fiori (Appennino Centrale esterno). Bollettino della Società Geologica Italiana 117, 725-745.
25. Calamita F, Coltorti M, Piccinini D, et al. 2000. Quaternary faults and seismicity in the Umbro-Marchean Apennines (central Italy). Journal of Geodynamics 29, 245-264.
26. Calamita F, Esestime P, Paltrinieri W, Scisciani V, Tavarnelli E. 2009. Structural inheritance of pre- and synorogenic normal faults on the arcuate geometry of Pliocene-Quaternary thrusts: Examples from the Central and Southern Apennine Chain. Italian Journal of Geosciences 128, 381-394.
27. Calamita F, Satolli S, Scisciani V, Esestime P, Pace P. 2011. Contrasting styles of fault reactivation in curved orogenic belts: examples from the Central Apennines (Italy). Geological Society of America Bulletin 123, 1097-1111.
28. Calamita F, Satolli S, Turtù A. 2012a. Analysis of thrust shear zones in curve-shaped belts: Deformation mode and timing of the Olevano-Antrodoco-Sibillini thrust (Central/Northern Apennines of Italy). Journal of Structural Geology 44, 179-187.
29. Calamita F, Pace P, Satolli S. 2012b. Coexistence of fault-propagation and fault-bend folding in curve-shaped foreland fold-and-thrust belts: examples from the Northern Apennines (Italy). Terra Nova 24, 396-406.
30. Carosi R, Di Pisa A, Iacopini D, Montomoli C, Oggiano G. 2004. The structural evolution of the Asinara Island (NW Sardinia, Italy). Geodinamica Acta, 17, 309-329.
31. Casas JM, Sàbat F. 1987. An example of three-dimensional analysis of thrust-related tectonites. Journal of Structural Geology 9, 647-657.
32. Chattopadhyay N, Ray S, Sanyal S, Sengupta P. 2016. Mineralogical, textural and chemical reconstitution of granitic rock in ductile shear zone: A study from a part of the South Purulia Shear Zone, West Bengal, India. In Ductile Shear Zones: From Micro- to Macro-scales, edited by S. Mukherjee and K.F. Mulchrone, John Wiley & Sons, Chichester.
33. Chester F, Friedman M, Logan J. 1985. Foliated cataclasites. Tectonophysics 111, 139-146.
34. Ciarapica G, Passeri L. 2002. The palaeogeographic duplicity of the Apennines. Bollettino della Società Geologica Italiana Special Volume 1, 67-75.
35. Collettini C, Viti C, Tesei T, Mollo S. 2013. Thermal decomposition along natural carbonate faults during earthquakes: Geology 41, 927-930.
36. Coward MP. 1976. Strain within ductile shear zones. Tectonophysics 34, 181-197.
37. Coward MP. 1982. Surge zones in the Moine thrust zone of NW Scotland. Journal of Structural Geology 4, 247-256.
38. Coward MP. 1983. The thrust and shear zones of the Moine thrust zone and the NW Scottish Caledonides. Journal of the Geological Society 140, 795-811.
39. De Paor DG. 1983. Orthographic analysis of geological structures-I. Deformation theory. Journal of Structural Geology 5, 255-277.
40. Di Domenica A, Turtù A, Satolli S, Calamita F. 2012. Relationships between thrusts and normal faults in curved belts: new insight in the inversion tectonics of the Central-Northern Apennines (Italy). Journal of Structural Geology 42, 104-117.
41. Di Domenica A, Bonini L, Calamita F, Toscani G, Galuppo C, Seno S. 2014. Analogue modeling of positive inversion tectonics along differently oriented pre-thrusting normal faults: An application to the Central-Northern Apennines of Italy. Geological Society of America Bulletin. First published online March 20, 2014,. doi:10.1130/B31001.1.
42. Ghosh SK. 1987. Measure of non-coaxiality. Journal of Structural Geology 9, 111-113.
43. Grasemann B, Stüwe K, Vannay JC. 2003. Sense and non-sense of shear in flanking structures. Journal of Structural Geology 25, 19-34.
44. Hanmer S, Passchier CW. 1991. Shear sense indicators: a review. Geological Survey of Canada 90-17, 1-72.
45. Harris LB, Cobbold PR. 1984. Development of conjugate shear bands by bulk simple shearing. Journal of Structural Geology 7, 37-44.
46. Holdsworth RE. 1989. Late brittle deformation in a caledonian ductile thrust wedge: new evidence for gravitational collapse in the Moine Thrust sheet, Sutherland, Scotland. Tectonophysics 170, 17-28.
47. Holdsworth RE, Strachan RA, Alsop GI, Grant CJ, Wilson RW. 2006. Thrust sequences and the significance of low-angle, out-ofsequence faults in the northernmost Moine Nappe and Moine Thrust Zone, NW Scotland. Journal of the Geological Society, London 163, 801-814.
48. Iacopini D, Carosi R, Montomoli C, Passchier CW. 2008. Strain analysis and vorticity of flow in the Northern Sardinian Variscan Belt: recognition of a partitioned oblique deformation event. Tectonophysics 446, 77-96.
49. Iacopini D, Frassi C, Carosi R, Montomoli C. 2011. Biases in threedimensional vorticity analysis using porphyroclast system: limits and application to natural examples. In Deformation Mechanisms, Rheology and Tectonics: Microstructures, Mechanics and Anisotropy, edited by D.J. Prior, E.H. Rutter, and D.J. Tatham, Geological Society of London, Special Publications, London, 360, pp. 301-318.
50. Jefferies SP, Holdsworth RE, Shimamoto T, Takagi H, Lloyd GE, Spiers CJ. 2006. Origin and mechanical significance of foliated cataclastic rocks in the cores of crustal-scale faults: Examples from the Median Tectonic Line, Japan. Journal of Geophysical Research 111, B12303.
51. Jegouzo P. 1980. The South Armorican shear zone. Journal of Structural Geology 7, 37-44.
52. Koopman, A. (1983) Detachment tectonics in the Central Apennines, Italy. Geologica Ultraiectina 30, 1-55.
53. Kurz GA, Northrup CJ. 2008. Structural analysis of mylonitic rocks in the Cougar Creek Complex, Oregon-Idaho using the porphyroclast hyperbolic distribution method, and potential use of SC'- type extensional shear bands as quantitative vorticity indicators. Journal of Structural Geology 30, 1005-1012.
54. Lavecchia G. 1985. Il sovrascorrimento dei Monti Sibillini: analisi cinematica e strutturale. Bollettino della Società Geologica Italiana 104, 161-194.
55. Lister GS, Snoke AW. 1984. S-C mylonites. Journal of Structural Geology 6, 617-638.
56. Logan JM, Dengo CA, Higgs NG, Wang ZZ. 1992. Fabrics of experimental fault zones: their development and relationship to mechanical behavior. In Fault Mechanics and Transport Properties of Rocks, edited by B. Evans and B. Wong, Academic press, London, pp. 33-67.
57. Mazzoli S, Pierantoni PP, Borraccini F, Paltrinieri W, Deiana G. 2005. Geometry, segmentation pattern and displacement variations along a major Apennine thrust zone, central Italy. Journal of Structural Geology 27, 1940-1953.
58. McClay KR. 1987. The Mapping of Geological Structures. John Wiley & Sons, Chichester, UK.
59. Means WD, Hobbs BE, Lister GS, Williams PF. 1980. Vorticity and non-coaxiality in progressive deformations. Journal of Structural Geology 2, 371-378.
60. Misra S, Mandal N, Chakraborty C. 2009. Formation of Riedel shear fractures in granular materials: Findings from analogue shear experiments and theoretical analyses. Tectonophysics 471, 253-259.
61. Mukherjee S. 2007. Geodynamics, deformation and mathematical analysis of metamorphic belts of the NW Himalaya. PhD thesis. Indian Institute of Technology, Roorkee.
62. Mukherjee S. 2010a. Microstructures of the Zanskar Shear Zone. Earth Science India 3, 9-27.
63. Mukherjee S. 2010b. Structures in meso- and micro-scales in the Sutlej section of the Higher Himalayan shear zone, Indian Himalaya. e-Terra 7, 1-27.
64. Mukherjee S. 2011. Mineral fish: their morphological classification, usefulness as shear sense indicators and genesis. International Journal of Earth Sciences 100, 1303-1314.
65. Mukherjee S. 2012a. Simple shear is not so simple! Kinematics and shear senses in Newtonian viscous simple shear zones. Geological Magazine 149, 819-826.
66. Mukherjee S. 2012b. Tectonic implications and morphology of trapezoidal mica grains from the Sutlej section of the Higher Himalayan Shear Zone, Indian Himalaya. The Journal of Geology 120, 575-590.
67. Mukherjee S. 2013a. Channel flow extrusion model to constrain dynamic viscosity and Prandtl number of the Higher Himalayan Shear Zone. International Journal of Earth Sciences 102, 1811-1835.
68. Mukherjee S. 2013b. Higher Himalaya in the Bhagirathi section (NW Himalaya, India): its structures, backthrusts and extrusion mechanism by both channel flow and critical taper mechanisms. International Journal of Earth Sciences 102, 1851-1870.
69. Mukherjee S. 2013c. Deformation Microstructures in Rocks. Springer, Heidelberg, pp. 1-111.
70. Mukherjee S. 2014a. Atlas of Shear Zone Structures in Meso-scale. Springer, Cham, pp. 1-124.
71. Mukherjee S. 2014b. Review of flanking structures in meso- and micro-scales. Geological Magazine 151, 957-974.
72. Mukherjee S. 2014c. Kinematics of "top-to-down" simple shear in a Newtonian rheology. The Journal of Indian Geophysical Union 18, 273-276.
73. Mukherjee S, Biswas R. 2014. Kinematics of horizontal simple shear zones of concentric arcs (Taylor-Couette flow) with incompressible Newtonian rheology. International Journal of Earth Sciences 103, 597-602.
74. Mukherjee, S., Punekar JN, Mahadani T, Mukherjee R. 2016. Intrafolial folds: Review and examples from the western Indian Higher Himalaya. In Ductile Shear Zones: From Micro- to Macro-scales, edited by S. Mukherjee and K.F. Mulchrone, John Wiley & Sons, Chichester.
75. Mukherjee S, Koyi HA. 2009. Flanking microstructures. Geological Magazine 146, 517-526.
76. Mukherjee S, Koyi HA. 2010a. Higher Himalayan Shear Zone, Sutlej section: structural geology and extrusion mechanism by various combinations of simple shear, pure shear and channel flow in shifting modes. International Journal of Earth Sciences 99, 1267-1303.
77. Mukherjee S, Koyi HA. 2010b. Higher Himalayan Shear Zone, Zanskar Indian Himalaya: microstructural studies and extrusion mechanism by a combination of simple shear and channel flow. International Journal of Earth Sciences 99, 1083-1110.
78. Mukherjee S, Mulchrone KF. 2013. Viscous dissipation pattern in incompressible Newtonian simple shear zones: an analytical model. International Journal of Earth Sciences 102, 1165-1170.
79. Pace P, Calamita F. 2014. Push-up inversion structures v. fault-bend reactivation anticlines along oblique thrust ramps: examples from the Apennines fold-and-thrust belt (Italy). Journal of the Geological Society 171, 227-238.
80. Pace P, Scisciani V, Calamita F. 2011. Styles of Plio-Quaternary Positive Inversion Tectonics in the Central-Southern Apennines and in the Adriatic Foreland. Rendiconti Online Società Geologica Italiana 15, 88-91.
81. Pace P, Satolli S, Calamita F. 2012. The control of mechanical stratigraphy and inversion tectonics on thrust-related folding along the curved Northern Apennines thrust front. Rendiconti Online Società Geologica Italiana 22, 162-165.
82. Pace P, Di Domenica A, Calamita F. 2014. Summit low-angle faults in the Central Apennines of Italy: younger-on-older thrusts or rotated normal faults? Constraints for defining the tectonic style of thrust belts. Tectonics 33, 756-785.
83. Pamplona J, Rodrigues BC, Llana-Fúnez S, et al. 2016. Structure and Variscan evolution of Malpica-Lamego ductile shear zone (NW of Iberian Peninsula). In Ductile Shear Zones: From Micro- to Macro-scales, edited by S. Mukherjee and K.F. Mulchrone, John Wiley & Sons, Chichester.
84. Passchier CW. 1986. Flow in natural shear zones-the consequences of spinning flow regimes. Earth and Planetary Science Letters 77, 70-80.
85. Passchier CW. 2001. Flanking structures. Journal of Structural Geology 23, 951-962.
86. Passchier CW, Trouw RAJ. 2005. Microtectonics, second edition. Springer, Berlin, pp. 1-366.
87. Pierantoni PP. 1997. Faglie trascorrenti sin-thrusting come ripartizione della deformazione: L'esempio della Faglia Sabina (Appennino Centrale). Studi Geologici Camerti 14, 279-289.
88. Pierantoni PP. 1998. Il modello deformativo di sovrascorrimento cieco per lo sviluppo di anticlinali coricate e rovesciate nell'Appennino umbro-marchigiano. Studi Geologici Camerti 14, 291-303.
89. Pierantoni PP, Deiana G, Romano A, Paltrinieri W, Borraccini F, Mazzoli S. 2005. Geometrie strutturali lungo la thrust zone del fronte montuoso umbro-marchigiano-sabino. Bollettino della Società Geologica Italiana 124, 395-411.
90. Pierantoni PP, Deiana G, Galdenzi, S. 2013. Stratigraphic and structural features of the Sibillini Mountains (Umbria-Marche Apennines, Italy). Italian Journal of Geosciences 132, 497-520.
91. Platt JP. 1984. Secondary cleavages in ductile shear zones. Journal of Structural Geology 6, 439-442.
92. Platt JP, Vissers RLM. 1980. Extensional structures in anisotropic rocks. Journal of Structural Geology 2, 397-410.
93. Ponce de Leon MJ, Choukroune P. 1980. Shear zones in the Iberian arc. Journal of Structural Geology 2, 63-68.
94. Powell D, Glendinning RW. 1990. Late Caledonian extensional reactivation of a ductile thrust in NW Scotland: Journal of the Geological Society 147, 979-987.
95. Ragan DM. 2009. Structural Geology, An Introduction to Geometrical Techniques. Cambridge University Press, Cambridge.
96. Ramsay JG. 1980. Shear zone geometry: a review. Journal of Structural Geology 2, 83-101.
97. Ramsay JG, Graham RH. 1970. Strain variation in shear belts. Canadian Journal of Earth Sciences 7, 786-813.
98. Ricci Lucchi F. 1986. The Oligocene to recent foreland basins of the northern Apennines. Special Publication of the International Association for Sediment 8, 105-139.
99. Riedel W. 1929. Zur mechanik geologischer Brucherscheinungen. Zentralblatt für Mineralogie. Geologie und Paläontologie B, 354-368.
100. Rusciadelli G, Viandante MG, Calamita F, Cook AC. 2005. Burialexhumation history of the central Apennines (Italy), from the foreland to the chain building: thermochronological and geological data. Terra Nova 17: 560-572.
101. Santantonio M. 1993. Facies associations and evolution of pelagic carbonate platform/basin systems: examples from the Italian Jurassic. Sedimentology 40, 1039-1067.
102. Satolli S, Pace P, Viandante MG, Calamita F. 2014. Lateral variations in tectonic style across cross-strike discontinuities: an example from the Central Apennines belt (Italy). International Journal of Earth Sciences 103, 2301-2313.
103. Scisciani V. 2009. Styles of positive inversion tectonics in the Central Apennines and in the Adriatic foreland: Implications for the evolution of the Apennine chain (Italy). Journal of Structural Geology 31, 1276-1294.
104. Scisciani V, Tavarnelli E, Calamita F. 2001. Styles of tectonic inversion within syn-orogenic basins: Examples from the Central Apennines, Italy. Terra Nova 13, 321-326.
105. Scisciani V, Tavarnelli E, Calamita F. 2002. The interaction of extensional and contractional deformations in the outer zones of the Central Apennines, Italy. Journal of Structural Geology 24, 1647-1658.
106. Sengupta S, Chatterjee SM. 2016. Microstructural variations in quartzofeldspathic mylonites and the problem of vorticity analysis using rotating porphyroclasts in the Phulad Shear Zone, Rajasthan, India. In Ductile Shear Zones: From Micro- to Macroscales, edited by S. Mukherjee and K.F. Mulchrone, John Wiley & Sons, Chichester.
107. Sibson, R.H. (1977) Fault rocks and fault mechanisms. Journal of the Geological Society 133, 191-213.
108. Sibson RH. 1983. Continental fault structure and the shallow earthquake source. Journal of the Geological Society 140, 741-767.
109. Simpson C, De Paor DG. 1993. Strain and kinematic analysis in general shear zones. Journal of Structural Geology 15, 1-20.
110. Simpson C, Schmid SM. 1983. An evaluation of criteria to deduce the sense of movement in sheared rocks. Geological Society of America Bulletin 94, 1281-1288.
111. Speranza F, Satolli S, Mattioli E, Calamita F. 2005. Magnetic stratigraphy of Kimmeridgian-Aptian sections from Umbria-Marche (Italy): New details on the M polarity sequence. Journal of Geophysical Research: Solid Earth 110, B12109.
112. Sullivan WA. 2009. Kinematic significance of L tectonites in the footwall of a major terrane-bounding thrust fault, Klamath Mountains, California, USA. Journal of Structural Geology 31, 1197-1211.
113. Tavarnelli E. 1993a. Evidence for fault propagation folding in the Umbria-Marche-Sabina Apennines (Central Italy). Annales Tectonicae 7, 87-99.
114. Tavarnelli E. 1993b. Carta geologica dell'area compresa fra la Valnerina e la Conca di Rieti (Umbria sud-orientale ed alto Lazio). Dipartimento di Scienze della Terra, Università di Siena, scale 1:100 000, 1 sheet.
115. Tavarnelli E. 1994. Analisi geometrica e cinematica dei sovrascorrimenti compresi fra la Valnerina e la conca di Rieti (Appennino Umbro-Marchigiano-Sabino). Bollettino della Società Geologica Italiana 113, 249-259.
116. Tavarnelli E. 1996a. Tethyan heritage in the development of the Neogene Umbria-Marche fold-and-thrust belt, Italy: A 3D approach. Terra Nova 8, 470-478.
117. Tavarnelli E. 1996b. Ancient synsedimentary structural control on thrust ramp development: an example from the Northern Apennines, Italy. Terra Nova 8, 65-74.
118. Tavarnelli E. 1996c. The effects of preexisting normal faults on thrust ramp development: An example from the Northern Apennines, Italy. Geologische Rundschau 85, 363-371
119. Tavarnelli E. 1997. Structural evolution of a foreland fold-andthrust belt: the Umbria-Marche Apennines, Italy. Journal of Structural Geology 19, 523-534.
120. Tavarnelli E. 1999. Normal faults in thrust sheets: pre-orogenic extension, post-orogenic extension, or both? Journal of Structural Geology 21, 1011-1018.
121. Tavarnelli E, Alvarez W. 2002. The mesoscopic response to positive tectonic inversion processes: an example from the Umbria- Marche Apennines, Italy. Bollettino della Società Geologica Italiana 1, 715-727.
122. Tavarnelli E, Peacock DCP. 1999. From extension to contraction in syn-orogenic foredeep basins: the Contessa section, Umbria- Marche Apennines, Italy. Terra Nova 11, 55-60.
123. Tavarnelli E, Butler RWH, Decandia FA, et al. 2004. Implication of fault reactivation and structural inheritance in the Cenozoic tectonic evolution of Italy. In The Geology of Italy, edited by U. Crescenti, S. D'Offizi, S. Merlini, and R. Sacchi, Società Geologica Italiana, Italy, Special Volume 1, pp. 209-222.
124. Tchalenko JS. 1968. The evolution of kink-bands and the development of compression textures in sheared clays. Tectonophysics 6, 159-174.
125. ten Grotenhuis SM, Trouw RAJ, Passchier CW. 2003. Evolution of mica fish in mylonitic rocks. Tectonophysics 372, 1-21.
126. Tesei T, Collettini C, Viti C, Barchi MR. 2013. Fault architecture and deformation mechanisms in exhumed analogues of seismogenic carbonate-bearing thrusts. Journal of Structural Geology 55, 1-15.
127. Tikoff B, Fossen H. 1995. The limitations of three-dimensional kinematic vorticity analysis. Journal of Structural Geology 17, 1771-1784.
128. Watts MJ, Williams GD. 1979. Fault rocks as indicators of progressive shear deformation in the Guingamp region, Brittany. Journal of Structural Geology 1, 323-332.
129. White SH, Burrows SE, Carreras J, Shaw MD, Humphreys FJ. 1980. On mylonites in ductile shear zones. Journal of Structural Geology 2, 175-187.
130. Xypolias P. 2010. Vorticity analysis in shear zones: a review of methods and applications. Journal of Structural Geology 32, 2072-2092.
131. Yin A, Kelty TK. 1991. Development of normal faults during emplacement of a thrust sheet: an example from the Lewis allochthon, Glacier National Park, Montana (USA). Journal of Structural Geology 13, 37-47.