Structural geology: An introduction to geometrical techniques, Fourth edition

Structural Geology: An Introduction to Geometrical Techniques, Fourth Edition

Volumn 9780521897587, Issue , 2009, Pages 1-602

  Ragan, Donal M ^a  

^a ARIZONA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

GEOLOGY; LABORATORIES; STUDENTS; THREE DIMENSIONAL COMPUTER GRAPHICS;

FIELD OBSERVATIONS; GEOLOGICAL STRUCTURES; GEOMETRIC PROBLEMS; GRAPHICAL METHODS; STRUCTURAL FIELDS; THREE-DIMENSIONAL PROBLEMS; UNDERGRADUATE LABORATORY; VISUALIZATION TECHNIQUE;

STRUCTURAL GEOLOGY;

EID: 84924208300     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1017/CBO9780511816109     Document Type: Book

References (436)

1. Ailleres, L., & M. Campenois, 1994, Refinements to the Fry method (1979) using image processing: Journal of Structural Geology, v. 16, p. 1327-1330.
2. Alcock, J., 1994a, Simulating the historical process to create laboratory exercises that teach research methods: Journal of Geological Education, v. 42, p. 118-124.
3. Alcock, J., 1994b, The discordant Doe Run thrust: implications for stratigraphy and structure in the Glenarm Supergroup, southeastern Pennsylvania Piedmont: Geological Society of America Bulletin, v. 106, p. 932-941.
4. Allmendinger, R. W., 2001, www. geo. cornell. edu/geology/faculty/RWA/RWA. html.
5. Anderson, E. M., 1951, The Dynamics of Faulting: Second Edition, Oliver & Boyd, Edinburgh.
6. Angelier, J., 1994, Fault slip analysis and paleostress reconstruction: in P. L. Hancock, editor, Continental Deformation, Pergamon Press, Oxford, pp. 53-100.
7. Argand, E., 1911, Les nappes de recouvrement des Alpes Pennines et leurs prolongement structuraux: Beiträge zur geologischen Karte der Schweiz, nue Folge 31, p. 1-26.
8. Aydin, A., &Z. Reches, 1982, Number and orientation of fault sets in the field and in experiments: Geology, v. 10, p. 107-112.
9. Badgley, P. C., 1959, Structural Methods for the Exploration Geologist: Harper&Row, NewYork.
10. Badgley, P. C., 1965, Structural and Tectonic Principles: Harper & Row, New York.
11. Bailey, E. B., &J. H. Mackin, 1937, Recumbent folding in the Pennsylvania Piedmont-preliminary statement: American Journal of Science, v. 33, p. 187-190.
12. Balk, R., 1937, Structural Behavior of Igneous Rock: Geological Society of America Memoir 5.
13. Bambach, R. K., 1973, Tectonic deformation of composite-mold fossil Bivalvia (Mollusca): American Journal of Science, v. 273-A, p. 409-430.
14. Barnes, C. W., & R. W. Houston, 1969, Basement response to the Laramide Orogeny at Coad Mountain, Wyoming: Contributions to Geology, v. 8, p. 37-41.
15. Barnes, J. W., 1995, Basic Geologic Mapping: Third Edition, Open University Press, Milton Keynes, UK.
16. Batchelor, G. K., 1967, An Introduction to Fluid Dynamics: Cambridge University Press, Cambridge, 617 p.
17. Bayly, M. B., 1971, Similar folds, buckling and great circle patterns: Journal of Geology, v. 79, p. 110-118.
18. Beach, A., 1979, The analysis of deformed belemnites: Journal of Structural Geology, v. 1, p. 127-135.
19. Bear, J., & Y. Bachmat, 1984, Transport phenomena in porous media-basic equations: in J. Bear&M. Y. Corapcioglu, editors, Fundamentals of Transport Phenomena in Porous Media, Martinus Nijhoff Publishers, Dordrecht, p. 3-61.
20. Bell, A. M., 1981, Vergence: an evaluation: Journal of Structural Geology, v. 3, p. 197-202.
21. Bengtson, C. A., 1983, Easy solutions stereonet rotation problems: American Association of Petroleum Geologists Bulletin, v. 67, p. 706-713.
22. Bergbauer, S., & D. D. Pollard, 2003, How to calculate normal curvature of sampled geological surfaces: Journal of Structural Geology, v. 25, p. 277-289.
23. Berthelsen, A., E. Bondesen&S. B. Jensen, 1962, Onthe so-called wildmigmatites: Krystalinikum, v. 1, p. 31-49.
24. Bhattacharyya, T., &S. Longiaru, 1986, Ability of the Fry method to characterize pressure-solution deformation-discussion: Tectonophysics, v. 131, p. 199-200.
25. Billings, M. P., 1972, Structural Geology: Third Edition, Prentice-Hall, Englewood Cliffs, N. J.
26. Biot, M. A., 1961, Theory of folding of stratified viscoelastic media and its implications in tectonics and orogenesis: Geological Society of America Bulletin, v. 72, p. 1595-1631.
27. Biot, M. A., H. Odé & W. L. Roever, 1961, Experimental verification of the theory of folding of stratified viscoelastic media: Geological Society of America Bulletin, v. 72, p. 1621-1620.
28. Bjørnerud, M. G., 1991, Conveying principles of finite strain with standard graphics software: Journal of Geological Education, v. 39, p. 23-27.
29. Bjørnerud, M. G., & B. Boyer, 1996, Image analysis in structural geology using NIH Image: in D. G. De Paor, editor, Structural Geology and Personal Computers, Pergamon, Oxford, p. 105-121.
30. Boas, M. L., 1983, Mathematical Methods in the Physical Sciences: Second Edition, JohnWiley, New York, 793 p.
31. Bons, P., & M. W. Jessell, 1996, Image analysis of microstructures in natural and experimental samples: in D. G. De Paor, editor, Structural Geology and Personal Computers, Pergamon, Oxford, p. 135-166.
32. Borowski, E. J., & J. M. Borwein, 1991, The HarperCollins Dictionary of Mathematics: Harper-Collins Publishers.
33. Borradaile, G. J., 1976, "Structural facing" (Shackleton's Rule) and the Palaeozoic rocks of the Malaguide Complex near Velez Rubio, SE Spain: Proceedings of the Koninklijke Nederlandse Akademie van Wetenschappen, Amsterdam, series B, v. 79, p. 330-336.
34. Borradaile, G. J., 1978, Transected folds: a study illustrated with examples from Canada and Scotland: Geological Society of America Bulletin, v. 89, p. 481-493.
35. Borradaile, G. J., 2003, Statistics of Earth Science Data: Their Distribution in Time, Space and Orientation: Springer-Verlag, Heidelberg.
36. Borradaile, G. J., & J. McArthur, 1991, Tests of strain analysis by experimental deformation: Tectonophysics, v. 185, p. 325-333.
37. Bott, M. H. P., 1959, The mechanics of oblique-slip faulting: Geological Magazine, v. 96, p. 109-117.
38. Boyce, W. E., & R. C. DiPrima, 1992, Elementary Differential Equations and Boundary Value Problems: Fifth Edition, JohnWiley, New York.
39. Boyer, S. E., & D. Elliott, 1982, Thrust systems: American Association of Petroleum Geologists Bulletin, v. 66, p. 1196-1230.
40. Brown, E. T., S. J. Green & K. P. Sinha, 1981, The influence of rock anisotropy on hole deviation in rotary drilling-a review: International Journal of Rock Mechanics and Mining Science & Geomechanical Abstracts, v. 18, p. 387-401.
41. Bucher, W. H., 1920, The mechanical interpretation of joints, part I: Journal of Geology, v. 28, p. 707-730.
42. Busk, H. G., 1929, Earth Flexures: Cambridge University Press, Cambridge (republished by William Trusell, New York, 1957).
43. Bussell, M. A., 1989, A simple method for the determination of the dilation direction of intrusive sheets: Journal of Structural Geology, v. 11, p. 679-687.
44. Butler, R. W. H., 1982a, Hanging wall strain: a function of duplex shape and footwall topography: Tectonophysics, v. 88, p. 235-246.
45. Butler, R. W. H., 1982b, The terminology in thrust zones: Journal of Structural Geology, v. 4, p. 239-245.
46. Buxtorf, A., 1916, Prognosen und Befunden beim Hauensteinbasis-und Grenchenberg-tunnel und die Bedeutung der letzeren für die Geologie des Juragebirges: Verhandlungen der Naturforschenden Gesellschaft in Basel, v. 27, p. 184-254.
47. Byerlee, J. D., 1978, Friction of rocks: Pure and Applied Geophysics, v. 116, p. 615-629.
48. Carey, S. W., 1962, Folding: Journal of the Alberta Society of Petroleum Geologists, v. 10, p. 95-144.
49. Carroll, R. T., 2003, The Skeptic's Dictionary: John Wiley & Sons, New York (see also htpp://skepdic. com).
50. Chapple, W. M., 1968, Amathematical theory of finite-amplitude rock-folding: Geological Society of America Bulletin, v. 79, p. 47-68.
51. Charlesworth, H. A. K., & W. E. Kilby, 1981, Calculating thickness from outcrop and drill-hole data: Bulletin of Canadian Petroleum Geology, v. 29, p. 277-292.
52. Charlesworth, H. A. K., C. W. Lengenberg&J. Ramsden, 1976, Determining axes, axial planes and sections of macroscopic folds using computer-based methods: Canadian Journal of Earth Science, v. 13, p. 54-65.
53. Cheeney, R. F., 1983, Statistical Methods in Geology: George Allen & Unwin, London.
54. Christensen, J. N, J. L. Rosenfeld & D. J. DePaolo, 1989, Rates of tectonometamorphic processes from rubidium and strontium isotopes in garnet, Science, v. 244, no. 4911, p. 1465-1469.
55. Christensen, M. N., 1963, Structural analysis of Hoosac Nappe in northwestern Massachusetts: America Journal of Science, v. 261, p. 97-107.
56. Clark, R. H., &D. B. McIntyre, 1951a, Amacroscopic method of fabric analysis: American Journal of Science, v. 249, p. 755-768.
57. Cloos, E., 1947, Oolite deformation in South Mountain fold, Maryland: Geological Society of America Bulletin, v. 58, p. 843-917.
58. Cluer, J. K., 1992, Agraphic method for projecting topographic profiles to various scales: Journal of Geology, v. 100, p. 135-137.
59. Coates, J., 1945, The construction of geological sections: The Quarterly Journal of the Geological, Mining and Metallurgical Society of India, v. 17, p. 1-11.
60. Cobbold, P. R., & H. Quinquis, 1980, Development of sheath folds in shear regimes: Journal of Structural Geology, v. 1/2, p. 119-126.
61. Compton, R. R., 1966, Analysis of Pliocene-Pleistocene deformation and stresses in Northern Santa Lucia Range, California: Geological Society of America Bulletin, v. 77, p. 1361-1380.
62. Compton, R. R., 1985, Geology in the Field: JohnWiley, New York.
63. Courant, R., 1936, Differential and Integral Calculus, Volume II: Interscience Publishers, New York.
64. Courant, R., & F. John, 1965, Introduction to Calculus and Analysis: Interscience Publishers, New York.
65. Crespi, J. M., 1986, Some guidelines for the practical application of Fry's method of strain analysis: Journal of Structural Geology, v. 8, p. 799-808.
66. Crowell, J. C., 1959, Problems of fault nomenclature: American Association of Petroleum Geologists Bulletin, v. 43, p. 2653-2674.
67. Cruden, D. M., 1971, Traces of a lineation on random planes: Geological Society of America Bulletin, v. 82, p. 2303-2305.
68. Cruden, D. M., 1986, The geometry of slip surfaces beneath landslides: prediction from surface measurements: discussion: Canadian Geotechnical Journal, v. 23, p. 94.
69. Cruden, D. M., & H. A. K. Charlesworth, 1976, Errors in strike and dip measurements: Geological Society of America Bulletin, v. 87, p. 977-980.
70. Cummins, W. A., & R. M. Shackleton, 1955, The Ben Lui recumbent syncline (S. W. Highlands): Geological Magazine, v. 92, p. 353-363.
71. Dahlstrom, C. D. A., 1969a, Balanced cross sections: Canadian Journal of Earth Science, v. 6, p. 743-757.
72. Dahlstrom, C. D. A., 1969b, The upper detachment in concentric folding: Bulletin of Canadian Petroleum Geology, v. 17, p. 326-346.
73. Dahlstrom, C. D. A., 1970, Structural geology in the eastern margin of the Canadian Rocky Mountains: Bulletin of Canadian Petroleum Geology, v. 18, p. 332-406.
74. Dallmus, K. F., 1958, Mechanics of basin evolution and its relation to the habitat of oil in the basin: in L. G. Weeks, editor, Habitat of Oil, American Association of Petroleum Geologists, p. 883-931.
75. Davis, G. H., & S. J. Reynolds, 1996, Structural Geology of Rock and Regions: Second Edition, JohnWiley, New York, 776 p.
76. Davis, J. C., 2002, Statistics and Data Analysis in Geology: Third Edition, JohnWiley, NewYork.
77. Davis, R. O., & A. P. S. Selvadurai, 1996, Elasticity and Geomechanics: Cambridge University Press, Cambridge.
78. Denness, B., 1970, A method of contouring polar diagrams using curvilinear counting cells: Geological Magazine, v. 107, p. 55-66.
79. Denness, B., 1972, Arevised method of contouring stereograms using curvilinear cells: Geological Magazine, v. 109, p. 157-163.
80. Dennis, J. G., 1967, International Tectonic Dictionary: American Association of Petroleum Geologists, Memoir 7, 196 p.
81. Den Tex, E., 1954, Stereographic distinction of linear and planar structures from apparent lineations in random exposure planes: Journal of the Geological Society of Australia, v. 1, p. 55-66.
82. De Paor, D. G., 1980, Some limitations of the Rf/φ technique of strain analysis: Tectonophysics, v. 64, p. T29-T31.
83. De Paor, D. G., 1988, Balanced sections in thrust belts, Part 1: construction: American Association of Petroleum Geologists Bulletin, v. 72, p. 73-90.
84. De Paor, D. G., 1989, An interactive program for doing Fry Strain Analysis on the Mackintosh microcomputer: Journal of Geological Education, v. 37, p. 171-180.
85. De Paor, D. G., 1991, Amodern solution to the classical three-point problem: Journal of Geological Education, v. 39, p. 322-324.
86. De Paor, D. G., 1994, Aparametric representation of ellipses and ellipsoids: Journal of Structural Geology, v. 16, p. 1331-1333.
87. Devlin, K. J., 1994, Mathematics: the Science of Pattern: Scientific American Library, NewYork.
88. De Sitter, L. U., & H. J. Zwart, 1960, Tectonic development in supra-and infrastructures of a mountain chain: 21st International Geological Congress, Part 18, p. 248-256.
89. Dickinson, W. R., 1966, Structural relationships of San Andreas fault system, Cholame Valley and Castle Mountain Range: Geological Society of America Bulletin, v. 77, p. 707-726.
90. Donath, F. A., 1961, Experimental study of shear failure in anisotropic rocks: Geological Society of America Bulletin, v. 72, p. 985-990.
91. Donath, F. A., 1963, Fundamental problems in dynamic structural geology: in T. W. Donnelly, editor, Earth Sciences: Problems and Progress in Current Research, University of Chicago Press, Chicago, p. 83-103.
92. Donath, F. A., 1964, Strength variation and deformation behavior in anisotropic rocks: in W. R. Judd, editor, State of Stress in the Earth's Crust, American Elsevier, New York, p. 281-297.
93. Donath, F. A., & R. B. Parker, 1964, Folds and folding: Geological Society of America Bulletin, v. 75, p. 45-62.
94. Drucker, D. C., 1967, Introduction to Mechanics of Deformable Solids: McGraw-Hill Book Company, New York, 445 p.
95. Dubey, A. K., 1980, Model experiments showing simultaneous development of folds and transcurrent faults: Tectonophysics, v. 65, p. 69-84.
96. Dunne, W. M., C. M. Onasch & R. T. Williams, 1990, The problem of strain-marker centers and the Fry method: Journal of Structural Geology, v. 12, p. 933-938.
97. Durelli, A. J., E. A. Phillips & C. H. Tsao, 1958, Introduction to the theoretical and experimental analysis of stress and strain: McGraw-Hill Book Company, New York.
98. Durney, D. W., & H. J. Kisch, 1994, A field classification and intensity scale for first-generation cleavages: AGSO Journal of Australian Geology & Geophysics, v. 15, p. 257-295 (see corrections v. 15, p. 539).
99. Earl, B. L., 1988, A comment on significant figures and propagation of uncertainty: Journal of Chemical Education, v. 65, p. 186-187.
100. Elliott, D., 1965, The quantitative mapping of directional minor structures: Journal of Geology, v. 73, p. 865-880.
101. Elliott, D., 1970, Determination of finite strain and initial shape from deformed elliptical objects: Geological Society of America Bulletin, v. 81, p. 2221-2236.
102. Elliott, D., 1972, Deformation paths in structural geology: Geological Society of America Bulletin, v. 83, p. 2621-2638.
103. Elliott, D., 1976, Energy balance in thrusts and deformation mechanisms of thrust sheets: Proceedings of the Royal Society of London, v. A2 83, p. 289-312.
104. Elliott, D., 1983, The construction of balanced cross-sections: Journal of Structural Geology, v. 5, p. 101.
105. Elliott, D., & M. R. W. Johnson, 1980, Structural evolution in the northern part of the Moine thrust belt, NW Scotland: Transactions of the Royal Society of Edinburgh: Earth Sciences, v. 71, p. 69-96.
106. Engelder, T., 1993, Stress Regimes in the Lithosphere: Princeton University Press, Princeton, N. J.
107. Engelder, T., 1999, Transitional-tensile fracture propagation: a status report: Journal of Structural Geology, v. 21, p. 1049-1055.
108. Erslev, E. A., 1988, Normalized center-to-center strain analysis of packed aggregates: Journal of Structural Geology, v. 10, p. 201-209.
109. Erslev, E. A., &Hongxing Ge, 1990, Least-squares center-to-center and mean object ellipse fabric analysis: Journal of Structural Geology, v. 12, p. 1047-1059.
110. Faill, R. T., 1973, Kink band folding, Valley and Ridge Province, Pennsylvania: Geological Society of America Bulletin, v. 84, p. 1289-1314.
111. Ferguson, C. C., 1981, A strain reversal method for estimating extension from fragmented rigid inclusions: Tectonophysics, v. 79, p. T43-T52.
112. Ferguson, C. C., 1987, Fracture and separation histories of stretched belemnites and other rigidbrittle inclusions in tectonites: Tectonophysics, v. 139, p. 255-273.
113. Ferguson, C. C., & G. E. Lloyd, 1984, Extension analysis of stretched belemnites: a comparison of methods: Tectonophysics, v. 101, p. 199-206.
114. Ferguson, H. G., & S. W. Muller, 1949, Structural geology of the Hawthorne and Tonopah quadrangles, Nevada: U. S. Geological Survey Professional Paper 216, 55 p.
115. Ferguson, J., 1994, Introduction to Linear Algebra in Geology: Chapman & Hall. London.
116. Ferziger, J. H., 1998, Numerical Methods for Engineering Applications: Second Edition, John Wiley & Sons, New York.
117. Fienen, M. N., 2005, The three-point problem, vector analysis and extension to n-point problem: Journal of Geoscience Education, v. 53, p. 257-262.
118. Fisher, D. J., 1941, Drillhole problems in the stereographic projection: Economic Geology, v. 36, p. 551-560.
119. Fisher, N. I., 1993, Statistical Analysis of Circular Data: Cambridge University Press, Cambridge.
120. Fisher, N. I., T. Lewis & B. J. J. Embleton, 1987, Statistical Analysis of Spherical Data: Cambridge University Press, Cambridge.
121. Fisher, R. A., 1953, Dispersion on a sphere: Proceedings of the Royal Society of London, v. A125, p. 54-59.
122. Fleuty, M. J., 1964, The description of folds: Proceedings of the Geologists Association, v. 75, p. 461-492.
123. Fleuty, M. J., 1974, Slickensides and slickenlines: Geological Magazine, v. 112, p. 319-322.
124. Fleuty, M. J., 1987a, Folds and folding: in C. K. Seyfert, editor, The Encyclopedia of Structural Geology and Plate Tectonics, Van Nostrand Reinhold Co., New York, p. 249-270.
125. Fleuty, M. J., 1987b, Slikensides and slikenlines: in C. K. Seyfert, editor, The Encyclopedia of Structural Geology and Plate Tectonics, Van Nostrand Reinhold Co., NewYork, p. 729-731.
126. Flinn, D., 1965, On the symmetry principle and the deformation ellipsoid: Geological Magazine, v. 102, p. 35-45.
127. Ford, M., &C. C. Ferguson, 1985, Cleavage strain in theVariscan Fold Belt, County Cork, Ireland, estimated from stretched arsenopyrite rosettes: Journal of Structural Geology, v. 7, p. 217-223.
128. Fowler, C. M. R., 1990, The Solid Earth: Cambridge University Press, Cambridge.
129. Freeman, T., 1991, Procedures in Field Geology: Friendship Publications, Columbia, Mo.
130. Fry, N., 1979a, Random point distributions and strain measurements in rocks: Tectonophysics, v. 60, p. 89-105.
131. Fry, N., 1979b, Density distribution techniques and strain length methods for determination of finite strains: Journal of Structural Geology, v. 1, p. 221-229.
132. Gage, M., 1979, A dilemma in structural mapping: New Zealand Journal of Geology and Geophysics, v. 22, p. 293.
133. Garland, G. D., 1979, Introduction to Geophysics (Mantle, Core and Crust): Second Edition, W. B. Saunders Company, Philadelphia.
134. Gelfand, I. M., & M. Saul, 2001, Trigonometry: Birkhäuser, Boston.
135. Gere, J. M., 2001, Mechanics of Materials: Fifth Edition, Brooks/ColeThompson Learning, Pacific Grove, Calif.
136. Ghaleb, A. R., & N. Fry, 1995, CSTRAIN: a FORTRAN 77 program to study Fry's plots in two-dimensional simulated models: Computers & Geosciences, v. 21, p. 825-831.
137. Ghosh, S. K., 1993, Structural Geology: Fundamentals and Modern Developments: Pergamon Press, Oxford.
138. Gill, J. E., 1935, Fault nomenclature: Royal Society of Canada Transactions, Third series, v. 35, sec. 4, p. 71-85.
139. Gill, J. E., 1941, Normal and reverse faults: Journal of Geology, v. 43, p. 1071-1079.
140. Gill, J. E., 1971, Continued confusion in the classification of faults: Geological Society of America Bulletin, v. 82, p. 1389-1392.
141. Gilluly, J., A. C. Waters &A. O. Woodford, 1968, Principles of Geology: Third Edition, Freeman, San Francisco.
142. Goetze, C., & B. Evans, 1979, Stress and temperature in the bending lithosphere as constrained by experimental rock mechanics: Geophysical Journal of the Royal Astronomical Society, v. 59, p. 463-478.
143. Goguel, J., 1962, Tectonics: Freeman, San Francisco.
144. Goodman, R. E., 1976, Methods of Geological Engineering in Discontinuous Rock: West Publishing Company, St. Paul, Minn.
145. Graham, R. L., D. E. Knuth & O. Patashnik, 1989, Concrete Mathematics: Addison-Wesley Publishing Co., Reading, Mass.
146. Gretener, P. E., 1981, Pore Pressure: Fundamentals, General Ramifications and Implications for Structural Geology (Revised): American Association of Petroleum Geologists Continuing Education Course Notes Series, No. 4.
147. Hafner, W., 1951, Stress distribution and faulting: Geological Society of America Bulletin, v. 62, p. 373-398.
148. Halliday, D., & R. Resnick, 1978, Physics, Parts I and II Combined: Third Edition, John Wiley & Sons, New York.
149. Handin, J., 1969, On the Coulomb-Mohr failure criterion: Journal of Geophysical Research, v. 74, p. 5343-5349.
150. Haneberg, W. C., 1990, A Lagrangian interpolation method for three-point problems: Journal of Structural Geology, v. 12, p. 945-948.
151. Haneberg, W. C., 2004, Computational Geosciences with Mathematica: Springer, Berlin.
152. Hanna, S. S., & N. Fry, 1979, A comparision of methods of strain determination in rocks from southwest Dyfed (Pembrokeshire) and adjacent areas: Journal of Structural Geology, v. 1, p. 155-162.
153. Hansen, E., 1971, Strain Facies: Springer Verlag, New York.
154. Hansen, W. R., 1960, Improved Jacob staff for measuring inclined stratigraphic intervals: American Association of Petroleum Geologists Bulletin, v. 44, p. 252-255.
155. Harker, A., 1884, Graphical methods in field geology: Geological Magazine, v. 1, p. 154-162.
156. Harker, A., 1885, On slaty cleavage and allied rock structures, with special reference to the mechanical theories of their origin: British Association for the Advancement of Science Report, p. 813-852.
157. Harrison, J. M., 1963, Nature and significance of geological maps: in C. C. Albritton, Jr., editor, The Fabric of Geology, Addison-Wesley, Reading, Mass., p. 225-232.
158. Herold, S. C., 1933, Projection of dip angle on profile section: American Association of Petroleum Geologists Bulletin, v. 17, p. 740-742.
159. Hewett, D. F., 1920, Measurement of folded beds: Economic Geology, v. 15, p. 367-385.
160. Higgins, C. G., 1962, Reconstruction of flexure fold by concentric arc method: American Association of Petroleum Geologists Bulletin, v. 46, p. 1737-1739.
161. Higgs, D. V., &G. Tunell, 1966, Angular Relations of Lines and Planes: Second Edition, W. H. Freeman and Company, San Francisco.
162. Hill, M. L., 1959, Dual classification of faults: American Association of Petroleum Geologist Bulletin, v. 43, p. 217-221.
163. Hill, M. L., 1963, Role of classification in geology: in C. C. Albritton, Jr., editor, The Fabric of Geology, Addison-Wesley, Reading, Mass., p. 164-174.
164. Hobbs, B. E., W. D. Means & P. F. Williams, 1976, An Outline of Structural Geology: JohnWiley, New York.
165. Hoek, E., & J. W. Bray, 1981, Rock Slope Engineering: Third Edition, Institute of Mining and Metallurgy, London.
166. Holcombe, R. J., 2001, GEOrient: www. earthsciences. uq. edu. au/rodh/software/index. html.
167. Holdsworth, R. E., 1988, The stereographic analysis of facing: Journal of Structural Geology, v. 10, p. 219-223.
168. Hossack, J. R., 1979, The use of balanced cross-sections in the calculation of orogenic contraction: a review: Journal of the Geological Society of London, v. 136, p. 705-711.
169. Hossain, K. M., 1979, Determination of strain from stretched belemnites: Tectonophysics, v. 88, p. 279-288.
170. Howson, M., &E. J. Sides, 1986, Borehole desurvey calculations: Computers&Geoscience, v. 12, p. 97-104.
171. Hsü, K. J., 1968, Principles of melanges and their bearing on the Franciscan-Knoxville paradox: Geological Society of America Bulletin, v. 79, p. 1063-1074.
172. Hubbert, M. K., 1931, Graphic solution of strike and dip from two angular components: American Association of Petroleum Geologists Bulletin, v. 15, p. 283-2862.
173. Hubbert, M. K., 1951, Mechanical basis for certain familiar geological structures: Geological Society of America Bulletin, v. 62, p. 365-372.
174. Hudleston, P. J., 1973, Fold morphology and some implications of theories of fold development: Tectonophysics, v. 16, p. 1-46.
175. Hudleston, P. J., S. H. Treagus & Labao Lan, 1996, Flexural flow folding: Does it occur in nature?: Geology, v. 24, p. 203-206.
176. Hudson, J. A., 1989, Rock Mechanics Principles in Engineering Practice: Butterworth, London.
177. Ickes, E. L., 1923, Similar, parallel and neutral surface types of folding: Economic Geology, v. 18, p. 575-591.
178. Jacobson, C. E., 1996, SpheriCAD: an AutoCAD program for analysis of structural orientation data: in D. G. De Paor, editor, Structural Geology and Personal Computers, Pergamon Press, Oxford, p. 181-193.
179. Jaeger, J. C., 1969, Elasticity, Fracture and Flow: Third Edition, Methuen, London.
180. Jaeger, J. C., & N. G. W. Cook, 1979, Fundamentals of Rock mechanics: Third Edition, Methuen, London.
181. Johnson, A. M., 1970, Physical Processes in Geology: Freeman, Cooper & Company, San Francisco.
182. Johnson, A. M., & R. C. Fletcher, 1994, Folding of Viscous Layers: Columbia University Press, New York.
183. Johnston, S. T., 1999, Squeezing down plunge projections out of graphics packages: Computers & Geosciences, v. 25, p. 197-200.
184. Jolly, R. J. H., &D. J. Sanderson, 1997, AMohr circle construction for the opening of a pre-existing fracture: Journal of Structural Geology, v. 19, p. 887-892.
185. Kalsbeek, F., 1963, A hexagonal net for the counting out and testing of fabric diagrams: Neues Jahrbuch für Mineralogie, Monatshefte, v. 7, p. 173-1776.
186. Kamb, W. B., 1959, Petrofabric observations from Blue Glacier, Washington, in relation to theory and experiment: Journal of Geophysical Research, v. 64, p. 1891-1909.
187. Kilby, W. E., &H. A. K. Charlesworth, 1980, Computerized downplunge projection and the analysis of low-angle thrust-faults in the Rocky Mountain Foothills of Alberta, Canada: Tectonophysics, v. 66, p. 287-299.
188. Kitson, H. W., 1929, Graphic solution of strike and dip from two dip components: American Association of Petroleum Geologists Bulletin, v. 13, p. 1211-1213.
189. Knopf, E. B., &E. Ingerson, 1938, Structural Petrology: Geological Society ofAmerica Memoir 6.
190. Kottlowski, F. E., 1965, Measuring Stratigraphic Sections: Holt, Rinehart &Winston, New York.
191. Kranck, E. H., 1953, Interpretation of gneiss structures with special reference to Baffin Island: Proceedings of the Geological Association of Canada, v. 6, p. 59-68.
192. Kraus, J., & P. F. Williams, 2001, A new spin on 'non-rotating' porphyroblasts: implications of cleavage refraction and reference frames: Journal of Structural Geology, v. 23, p. 963-971.
193. Kretz, R., 1991, The dilation direction of intrusive sheets: Journal of Structural Geology, v. 13, p. 97-99.
194. Krumbein, W. C., 1939, Preferred orientations of pebbles in sedimentary deposits: Journal of Geology, v. 47, p. 673-706.
195. Kuenen, Ph. H., & L. U. de Sitter, 1938, Experimental investigation into the mechanics of folding: Leidse Geologische Mededelingen, v. 10, p. 217-239.
196. Kulander, B. R., S. L. Dean & B. J. Ward, Jr., 1990, Fractured Core Analysis: Interpretation, Logging, and Use of Natural and Induced Fractures in Cores: Methods in Exploration Series, No. 8, American Association of Petroleum Geologists.
197. Kupfer, D. H., 1966, Accuracy in geological maps: Geotimes, v. 10, no. 7, p. 11-14.
198. Kutty, T. S., & S. Joy, 1994, RFPHI-a program in TURBOC for the Rf/φ diagram method of two-dimensional strain analysis: Computers & Geosciences, v. 20, p. 247-263.
199. Laing, W. P., 1977, Structural interpretation of drill core from folded and cleaved rocks: Economic Geology, v. 72, p. 671-685.
200. Lambe, T. N., & R. V. Whitman, 1979, Soil Mechanics: SI Edition: JohnWiley, New York, 553 p.
201. Langenberg, W., 1985, The geometry of folded and thrusted rocks in the Rocky Mountain Foothills near Grande Chache, Alberta: Canadian Journal of Earth Sciences, v. 22, p. 1711-1719.
202. Langenberg, C. W., H. E. Rondeel & H. A. K. Charlesworth, 1977, Astructural study in the Belgian Ardennes with sections constructed using computer-based methods: Geologie en Mijnbouw, v. 56, p. 145-154.
203. Langenberg, W., H. Charlesworth & A. La Rivier, 1988, Computer-constructed cross-section of the Morcles Nappe: Eclogae geologicalae Helvetiae, v. 80, p. 655-667.
204. Lapierre, J., D. Mainprice & W. B. Ismail, 1996, Calculation of rock properties from pole figures using LabView: in D. G. De Paor, editor, Structural Geology and Personal Computers, Pergamon Press, Oxford, p. 167-178.
205. La Pointe, P. R., & J. A. Hudson, 1985, Characterization and Interpretation of Rock Mass Joint Patterns: Geological Society of America Special Paper 199.
206. Lau, J. S. O., 1983, The determination of true orientation of fractures in rock cores: Canadian Geotechnical Journal, v. 20, p. 221-227.
207. Laubscher, H. P., 1977a, An intriguing example of a folded thrust in the Jura: Eclogae geologicalae Helvetiae, v. 70, p. 97-104.
208. Laubscher, H. P., 1977b, Fold development in the Jura: Tectonophysics, v. 37, p. 337-362.
209. Lee, W., C. L. Mulliss & H.-C. Chiu, 2000, On the standard rounding rule for addition and subtraction: Chinese Journal of Physics, v. 38, p. 36-41.
210. Leversen, I. A., 1960, Paleogeological Maps: Freeman, San Francisco.
211. Lisle, R. J., 1980, A simplified work scheme for using block diagrams with the orthographic net: Journal of Geological Education, v. 29, p. 81-83.
212. Lisle, R. J., 1985a, Geological Strain Analysis: A Manual for the Rf/φ Method: Pergamon Press, Oxford.
213. Lisle, R. J., 1985b, The facing of faults: Geological Magazine, v. 122, p. 249-251.
214. Lisle, R. J., 1994, Paleostrain analysis: in P. L. Hancock, editor, Continental Deformation, Pergamon Press, p. 28-42.
215. Lisle, R. J., 1997, A fold classification scheme based on a polar plot of inverse thickness: in S. Sengupta, editor, Evolution of Geological Structures in Micro-and Macro-scales, Chapman & Hall, London, p. 323-339.
216. Lisle, R. J., & P. R. Leyshon, 2004, Stereographic Projection Techniques for Geologists and Civil Engineers: Second Edition, Cambridge University Press, Cambridge.
217. Lisle, R. J., & D. M. Ragan, 1988, Strain from three stretches-a simple method: Journal of Structural Geology, v. 10, p. 905-906.
218. Lisle, R. J., & J. M. Robinson, 1995, The Mohr circle for curvature and its application to fold description: Journal of Structural Geology, v. 17, p. 739-750.
219. Livio, M., 2002, The Golden Ratio: Broadway Books, New York.
220. Lloyd, G. E., &E. Condliffe, 2003, 'Strain Reversal': aWindows program to determine extensional strain from rigid-brittle layers or inclusions: Journal of Structural Geology, v. 25, p. 1141-1145.
221. Lobeck, A. K., 1958, Block Diagrams: Second Edition, Emerson-Trussell, Amherst Mass.
222. Lowe, K. E., 1946, A graphic solution for certain problems of linear structures: American Mineralogist, v. 31, p. 425-434.
223. MacCaskie, D. R., 1986, Rapid field estimation of the degree of preferred orientation of elongate features: Journal of Geology, v. 94. p. 777-778.
224. MacDonald, W. D. 1980, Net tectonic rotation, apparent tectonic rotation, and the structural tilt correction in paleomagnetic studies: Journal of Geophysical Research, v. 85, p. 3659-3667.
225. Mackin, J. H., 1950, The down-structure method of viewing geological maps: Journal of Geology, v. 58, p. 55-72.
226. Mackin, J. H., 1962, Structure of the Glenarm series in Chester County, Pennsylvania: Geological Society of America Bulletin, v. 73, p. 403-410.
227. Mancktelow, N. S., 2001, Single-layer folds developed from initial random perturbations: The effects of probability distribution, fractal dimensions, phase, and amplitude: in H. A. Koyi & N. S. Mancktelow, editors, Tectonic Modeling: A Volume in Honor of Hans Ramberg: Geological Society of America Memoir 193, p. 69-87.
228. Maor, E., 1998, Trigonometric Delights: Princeton University Press, Princeton, N. J.
229. Mardia, K. V., 1972, Statistics of Orientation Data: Academic Press, London.
230. Mardia, K. V., & P. E. Jupp, 2000, Directional Statistics: JohnWiley, Chichester.
231. Marjoribanks, R. W., 1974, An instrument for measuring dip isogons and fold layer shape parameters: Journal of Geological Education, v. 22, p. 62-64.
232. Marshak, S., & N. B. Woodward, 1988, Introduction to cross-section balancing: in S. Marshak & G. Mitra, editors, Basic Methods of Structural Geology, Prentice-Hall, Englewood Cliffs, N. J., p. 303-332.
233. Mase, G. E., 1970, Theory and Problems of Continuum Mechanics: Schaum's Outline Series, McGraw-Hill Book Company, New York.
234. Matthews, P. E., R. A. B. Bond & J. J. Van den Berg, 1971, Analysis and structural implications of a kinematic model of similar folding: Tectonophysics, v. 12, p. 129-154.
235. McClay, K. R., 1987, The Mapping of Geologic Structures: Open University Press, Milton Keynes, UK.
236. McClay, K. R., 1992, Glossary of thrust tectonics terms: in K. R. McClay, editor, Thrust Tectonics: Chapman & Hall, London, p. 419-433.
237. McCoss, A. M., 1987, Practical section drawing through folded layers using sequentially rotated cubic interpolators: Journal of Structural Geology, v. 9, p. 365-370.
238. McIntyre, D. B., & L. E. Weiss, 1956, Construction of block diagrams to scale in orthographic projection: Proceedings of the Geologists Association, v. 67, p. 145-155.
239. McKinstry, H., 1961, Structure of the Glenarm Series in Chester Country, Pennsylvania: Geological Society of America Bulletin, v. 72, p. 557-578.
240. McLeish, A. J., 1971, Strain analysis of deformed pipe rock in the Moine thrust zone, northwest Scotland: Tectonophysics, v. 12, p. 469-503.
241. McLenaghan, R., &S. Levy, 1996, Geometry: in Daniel Zwillinger, editor, Standard Mathematical Tables and Formulae: 30th Edition, CRC Press, Boca Raton, Fla., p. 249-330.
242. McNaught, M. A., 1994, Modifying the normalized Fry method for aggregates of non-elliptical grains: Journal of Structural Geology, v. 16, p. 493-503.
243. McNaught, M. A., 2002, Estimating uncertainty in normalized Fry plots using a bootstrap approach: Journal of Structural Geology, v. 24, p. 311-322.
244. Means, W. D., 1976, Stress and Strain: Basic Concepts of Continuum Mechanics for Geologists: Springer-Verlag, New York.
245. Means, W. D., 1987, A newly recognized type of slickenside striations: Journal of Structural Geology, v. 9, p. 585-590.
246. Means, W. D., 1990, Kinematics, stress, deformation and material behavior: Journal of Structural Geology, v. 12, p. 953-971.
247. Means, W. D., 1992, Rotational quantities in homogeneous flow and the development of smallscale structures: Journal of Structural Geology, v. 16, p. 437-445.
248. Means, W. D., 1996, How To Do Anything with Mohr Circles: A Short Course About Tensors for Structural Geologists: Short CourseWorkbook, Geological Society of America.
249. Meere, P. A., & K. F. Mulchrone, 2003, The effect of sample size on geological strain estimation from passively deformed clastic sedimentary rocks: Journal of Structural Geology, v. 25, p. 1587-1595.
250. Mertie, J. B., Jr., 1922, Graphic and mechanical computation of thickness of stratum and distance to a stratum: U. S. Geological Survey Professional Paper 129-C, p. 39-52.
251. Mertie, J. B., Jr., 1940, Stratigraphic measurement in parallel folds: Geological Society of America Bulletin, v. 51, p. 1107-1133.
252. Mertie, J. B., Jr., 1943, Structural determinations from diamond drilling: Economic Geology, v. 38, p. 298-312.
253. Mertie, J. B., Jr., 1947, Delineation of parallel folds and measurement of stratigraphic dimensions: Geological Society of America Bulletin, v. 58, p. 779-802.
254. Middleton, G. V., 2000, Data Analysis in the Earth Sciences using MATLAB®: Prentice-Hall, Inc., Upper Saddle River, N. J.
255. Middleton, G. V., & P. R. Wilcock, 1994, Mechanics in the Earth and Environmental Sciences: Cambridge University Press, Cambridge.
256. Moon, F. C., 1992, Chaotic and Fractal Dynamics: JohnWiley, New York.
257. Mountjoy, E. W., 1992, Significance of rotated folds and thrust faults, Alberta Rocky Mountains: in Shankar Mitra & G. W. Fisher, editors, Structural Geology of Fold and Thrust Belts, Johns Hopkins University Press, Baltimore, p. 207-223.
258. Mueller, B., V. Wehrle & K. Fuchs, 1997, The 1997 release of the World Stress Map (available on-line at www-wsm. physik. uni-karlsruhe. de/pub/Rel97/wsm97. html).
259. Muhuri, S. K., T. A. Dewers, T. E. Scott, Jr. & Z. Reches, 2003, Interseismic fault strengthening and earthquake-slip instability; friction or cohesion?: Geology, v. 31, p. 881-884.
260. Mulchrone, K. F., & P. A. Meere, 2001, A windows program for the analysis of tectonic strain using deformed elliptical markers: Computers & Geosciences, v. 27, p. 1251-1255.
261. Müller, L., 1933, Untersuchungen über statistische Kluftmessung: Geologie und Bauwesen, v. 5, no. 4, p. 185-255.
262. Mulliss, C. L., & Wei Lee, 1998, On the standard rounding rule for multiplication and division: Chinese Journal of Physics, v. 36, p. 479-487.
263. Nye, J. F., 1985, Physical Properties of Crystals: Revised Edition, Clarendon Press, Oxford.
264. O'Driscoll, E. S., 1962, Experimental patterns in superposed similar folding: Journal of the Alberta Society of Petroleum Geologists, v. 10, p. 145-167.
265. O'Driscoll, E. S., 1964, Cross fold deformation by simple shear: Economic Geology, v. 59, p. 1061-1093.
266. Oertel, G., 1962, Extrapolation in geological fabrics: Geological Society of America Bulletin, v. 73, p. 325-342.
267. Oertel, G., 1996, Stress and Deformation: A Handbook on Tensors in Geology: Oxford University Press, New York.
268. Onasch, C. M., 1986a, Ability of the Fry method to characterize pressure-solution deformation: Tectonophysics, v. 122, p. 187-193.
269. Onasch, C. M., 1986b, Ability of the Fry method to characterize pressure-solution deformation-reply: Tectonophysics, v. 131, p. 201-203.
270. Ottino, J. M., 1989, The mixing of fluids: Scientific American, v. 260, no. 1, p. 56-67.
271. Ottino, J. M., 1990, The Kinematics of Mixing: Stretching, Chaos, and Transport: Cambridge University Press, Cambridge.
272. Ottino, J. M., 1992, Newapplications of chaos in chemical engineering: intuition versus prediction: in J. H. Kim & J. Stringer, editors, Applied Chaos, JohnWiley, New York, p. 143-174.
273. Owens, W. H., 2000, An alternative approach to the Busk construction for a single surface: Journal of Structural Geology, v. 22, p. 1379-1383.
274. Palmer, C. I., C. W. Leigh&S. H. Kimball, 1950, Plane and Spherical Trigonometry: Fifth Edition, McGraw-Hill, New York.
275. Panozzo, R., 1984, Two-dimensional strain from the orientation of lines in a plane: Journal of Structural Geology, v. 6, p. 215-221.
276. Panozzo, R., 1987, Two-dimensional strain determination by the inverse SURFOR wheel: Journal of Structural Geology, v. 9, p. 115-119.
277. Park, Y., 1996, Synkinematic microscopic analysis using NIH Image: in D. G. De Paor, editor, Structural Geology and Personal Computers, Pergamon, Press, Oxford, p. 123-134.
278. Passchier, C. W., & R. A. J. Trouw, 1996, Microtectonics: Springer-Verlag, Berlin.
279. Peach, C. J., & R. J. Lisle, 1979, AFORTRAN IV program for the analysis of tectonic strain using deformed elliptical markers: Computers & Geoscience, v. 5, p. 325-334.
280. Peacock, D. C. P., R. J. Knipe & D. J. Sanderson, 2000, Glossary of normal faults: Journal of Structural Geology, v. 22, p. 291-305.
281. Pfiffner, O. A., 1981, Fold-and-thrust tectonics in the Helvetic Nappes (E Switzerland): in K. R. McClay & N. J. Price, editors, Thrust and Nappe Tectonics, Special Publication No. 9, Geological Society of London, p. 319-327.
282. Pfiffner, O. A., & J. G. Ramsay, 1982, Constraints on geological strain rates: arguments from finite strain states of naturally deformed rocks: Journal of Geophysical Research, v. 87, p. 311-321.
283. Phillips, F. C., 1963, An Introduction to Crystallography: Third Edition, JohnWiley, New York.
284. Phillips, F. C., 1971, The Use of Stereographic Projection in Structural Geology: Third Edition, Edward Arnold, London.
285. Philpots, A. R., N. H. Gray, M. Caroll, R. P. Steinen & J. B. Reid, 1997, The electronic total station-a versatile, revolutionary new geological mapping tool: Journal of Geoscience Education, v. 45, p. 38-45.
286. Pincus, H. J., 1956, Some vector and arithmetic operations on two-dimensional orientation variates, with applications to geological data: Journal of Geology, v. 64, p. 533-557.
287. Pollard, D. D., S. D. Saltzer & A. M. Rubin, 1993, Stress inversion methods: are they based on faulty assumptions?: Journal of Structural Geology, v. 15, p. 1045-1054.
288. Pollard, D. D., &R. C. Fletcher, 2005, Fundamentals of Structural Geology: Cambridge University Press, Cambridge.
289. Powell, C.M.A., 1974, Timing of slaty cleavage during folding of Precambrian rocks, northwest Tasmania: Geological Society of America Bulletin, v. 85, p. 1043-1060.
290. Price, N. J., 1966, Fault and Joint Development in Brittle and Semi-Brittle Rocks: Pergamon, Oxford.
291. Price, N. J., 1970, Laws of rock behavior in the earth's crust: in W. H. Somerton, editor, Rock Mechanics: Theory and Practice, Procedings of the 11th Symposium on Rock Mechanics, American Institute Mining, Metallurgical and Petroleum Engineering, New York, p. 3-23.
292. Price, N. J., 1975, Rates of deformation: Journal of the Geological Society, v. 131, p. 553-575.
293. Priest, S. D., 1985, Hemispherical Projection Methods in Rock Mechanics: GeorgeAllen&Unwin, London.
294. Pumpelly, R., J. E. Wolfe & T. N. Dale, 1894, Geology of the Green Mountains in Massachusetts: U. S. Geological Survey Monograph 23.
295. Ragan, D. M., 1969a, Introduction to concepts of two-dimensional strain and their application with the use of card-deck models: Journal of Geological Education, v. 17, p. 135-141.
296. Ragan, D. M., 1969b, Structures at the base of an ice fall: Journal of Geology, v. 77, p. 647-667.
297. Ragan, D. M., & R. H. Groshong, Jr., 1993, Strain from two angles of shear: Journal of Structural Geology, v. 15, p. 1359-1360.
298. Ragan, D. M., & M. F. Sheridan, 1972, Compaction of the Bishop Tuff, California: Geological Society of America Bulletin, v. 83, p. 95-106.
299. Rahm, P. C., 1986, Engineering Geology: Elsevier, New York.
300. Raleigh, B., & J. Evernden, 1981, Case for low deviatoric stress in the lithosphere: in N. L. Carter, M. Friedman, J. M. Logan & D. W. Stearns, editors, Mechanical Behavior of Crustal Rocks, Geophysical Monograph 24, American Geophysical Union, p. 173-186.
301. Ramberg, H., 1981, Gravity, Deformation and the Earth's Crust: Second Edition, Academic Press, London.
302. Ramberg, H., 1987, Drag folds: in C. K. Seyfert, editor, The Encyclopedia of Structural Geology and Plate Tectonics, Van Nostrand Reinhold Co., New York, p. 206.
303. Ramsay, J. G., 1961, The effects of folding upon the orientation of sedimentary structures: Journal of Geology, v. 69, p. 84-100.
304. Ramsay, J. G., 1964, The uses and limitations of beta-diagrams and pi-diagrams in the geometrical analysis of folds: Quarterly Journal of the Geological Society, v. 120, p. 435-454.
305. Ramsay, J. G., 1967, Folding and Fracturing of Rocks: McGraw-Hill, New York.
306. Ramsay, J. G., 1969, The measurement of strain and displacement in orogenic belts: in P. E. Kent, G. E. Satterthwaite &A. M. Spencer, editors, Time and Place in Orogeny, Special Publication No. 3, Geological Society of London, p. 43-79.
307. Ramsay, J. G., 1980, Shear zone geometry: a review: Journal of Structural Geology, v. 2, p. 83-99.
308. Ramsay, J. G., 1982, Rock ductility and its influence on the development of tectonic structures in mountain belts: in K. J. Hsü, editor, Mountain Building Processes, Academic Press, London, p. 111-127.
309. Ramsay, J. G., 1992, Some geometrical problems of ramp-flat thrust models: in K. R. McClay, editor, Thrust Tectonics, Chapman & Hall, London, p. 191-200.
310. Ramsay, J. G., & M. I. Huber, 1983, The Techniques of Modern Structural Geology: Volume 1: Strain Analysis: Academic Press, London.
311. Ramsay, J. G., & M. I. Huber, 1987, The Techniques of Modern Structural Geology: Volume 2: Folds and Fractures: Academic Press, London.
312. Ramsay, J. G., & R. J. Lisle, 2000, The Techniques of Modern Structural Geology: Volume 3: Applications of Continuum Mechanics in Structural Geology: Academic Press, London.
313. Raup, D. M., & S. M. Stanley, 1978, Principles of Paleontology: Second Edition, W. H. Freeman and Company, San Francisco.
314. Reches, Z., 1978, Analysis of faulting in three-dimensional strain field: Tectonophysics, v. 47, p. 109-129.
315. Reches, Z., D. F. Hoexter & F. Hirsch, 1981, The structure of a monocline in the Syrian Arc System, Middle East-surface and subsurface analysis: Journal of Petroleum Geology, v. 3-4, p. 413-425.
316. Reches, Z. & D. A. Lockner, 1994, Nucleation and growth of faults in brittle rocks: Journal of Geophysical Research, v. 99, p. 18159-18173.
317. Redmond, J. L., 1972, Null combination in fault interpretation: American Association of Petroleum Geologists Bulletin, v. 56, p. 150-166.
318. Rich, J. L., 1932, Simple graphical method for determining true dip from two components and for constructing contoured structural maps from dip observations: American Association of Petroleum Geologists Bulletin, v. 16, p. 92-95.
319. Rickard, M. J., 1971, A classification diagram for fold orientation: Geological Magazine, v. 108, p. 23-26.
320. Rickard, M. J., 1972, Fault classification-discussion: Geological Society of America Bulletin, v. 83, p. 2545-2546.
321. Robinson, G. D., 1959, Measuring dipping beds: Geotimes, v. 4, p. 8-9, 24-27.
322. RockWare, 2001, www. rockware. com.
323. Rondeel, H. E., & F. Storbeck, 1978, Errors in geological compass determinations of the attitude of planar structures: Geologische Rundschau, v. 68, p. 913-919.
324. Rosenfeld, J. L., 1970, Rotated Garnets in Metamorphic Rocks: Geological Society of America, Special Paper 129.
325. Rutter, E. H., 1986, On the nomenclature of mode of failure transition in rocks: Tectonophysics, v. 122, p. 381-387.
326. Schedl, A., & B. A. van der Pluijm, 1988, A review of deformation microstructures: Journal of Geological Education, v. 36. p. 111-121.
327. Scheid, F., 1988, Theory and Problems of Numerical Analysis: Second Edition, Schaum's Outline Series, McGraw-Hill Book Co., New York.
328. Schmid, S. M., 1982, Microfabric studies as indicators of deformation mechanisms and flow laws operative in mountain building: in K. J. Hsü, editor, Mountain Building Processes, Academic Press, London, p. 97-110.
329. Schmidt, W., 1925, Gefügestatistik: Tschermak's Mitteilungen, v. 38, p. 392-423.
330. Scholz, C. H., 1988, The brittle-plastic transition and the depth of seismic faulting: Geologische Rundschau, v. 77, p. 319-328.
331. Scholz, C. H., 2002, The Mechanics of Earthquakes and Faulting: Second Edition, Cambridge University Press, Cambridge.
332. Schroeder, M. R., 1991, Fractals, Chaos, Power Laws: Minutes from an Infinite Paradise: W. H. Freeman and Company, New York.
333. Schryver, K., 1966, On the measurement of the orientation of axial planes of minor folds: Journal of Geology, v. 74, p. 83-84.
334. Schwerdtner, W. M., 1978, Determination of stratigraphic thickness of strained units: Canadian Journal of Earth Science, v. 15, p. 1379-1380.
335. Schwerdtner, W. M., P. J. Bennett&T. W. Janes, 1977, Application of L-S fabric scheme to structural mapping and paleostrain analysis: Canadian Journal of Earth Science, v. 14, p. 1021-1032.
336. Scott, R. J., & R. F. Berry, 2004, A new method for obtaining and quantifying the reliability of structural data from axially-oriented drill core using a fabric of known orientation: Journal of Structural Geology, v. 26, p. 643-658.
337. Scott, R. J., & D. Selley, 2004, Measurement of fold axes in drill core: Journal of Structural Geology, v. 26, p. 637-642.
338. Screven, R. W., 1963, A simple rule of V's of outcrop patterns: Journal of Geological Education, v. 11, p. 98-100.
339. Sellés-Martínez, J., 1993, A common misinterpretation of the equal-area properties: Journal of Structural Geology, v. 15, p. 1261-1353.
340. Seymour, D. B., & C. A. Boulter, 1979, Tests of computerisedstrain analysis by the analysis of simulated deformation of natural unstrained sedimentary fabrics: Tectonophysics, v. 58, p. 221-235.
341. Shackleton, R. M., 1958, Downward-facing structures of the Highland Border: Quarterly Journal of the Geological Society of London, v. 113, p. 361-392.
342. Sheridan, M. F., & D. M. Ragan, 1976, Compaction of ash-flow tuffs: in G. V. Chilingarian & K. M. Wolf, editors, Compaction of Coarse-grained Sediments, II, Elsevier Scientific Publishing Company, Amsterdam, p. 677-713.
343. Sherwin, J.-A., &W. M. Chapple, 1968, Wavelengths of single layer folds: Acomparison between theory and observation: American Journal of Science, v. 266, p. 167-197.
344. Sibson, R. H., 1974, Frictional constraints on thrust, wrench and normal faults: Nature (Physical Sciences), v. 249, p. 542-543.
345. Sibson, R. H., 1981, Fluid flow accompanying faulting: field evidence and models: in D. W. Simpson & P. G. Richards, editors, Earthquake Prediction: An International Review: Maurice Ewing Series 4, American Geophysical Union, p. 593-603.
346. Sikorsky, R. I., 1991, Adiagram for interpreting orientation data for planar features in core: Journal of Structural Geology, v. 13, p. 1085-1089.
347. Simpson, C., 1988, Analysis of two-dimensional strain: in S. Marshak & G. Mitra, editors, Basic Methods of Structural Geology, Prentice-Hall, Englewood Cliffs, N. J., p. 333-359.
348. Simpson, C., & S. M. Schmid, 1983, An evaluation of criteria to deduce the sense of movement in sheared rocks: Geological Society of America Bulletin, v. 94, p. 1281-1288.
349. Smith, D. P., 1994, The sphere as a tool for teaching statistics: Journal of Geological Education, v. 42, p. 412-416.
350. Spear, F. S., 1993, Metamorphic Phase Equilibria and Pressure-Temperature-Time Paths: Mineralogical Society of America Monograph, Washington, D. C.
351. Sprenke, K. F., 1992, Analytic geometry formulas and computer routines for stereonet problems: Journal of Geological Education, v. 40, p. 109-115.
352. Srivastava, H. B., 1995, Two dimensional strain estimation from weakly deformed rocks: Annales Tectonicæ, v. 9, p. 3-6.
353. Stauffer, M. R., 1966, An empirical-statistical study of three dimensional fabric diagrams as used in structural analysis: Canadian Journal of Earth Science, v. 3, p. 473-498.
354. Stauffer, M. R., 1968, The tracing of hinge-line ore bodies in areas of repeated folding: Canadian Journal of Earth Science, v. 5, p. 69-79.
355. Steidel, R. F., Jr., & J. M. Henderson, 1983, The Graphic Languages of Engineering: JohnWiley, New York.
356. Stein, H. A., 1941, A trigonometric solution of the two-drillhole problem: Economic Geology, v. 36, p. 84-94.
357. Stein, S., & M. Wysession, 2003, An Introduction to Seismology, Earthquakes, and Earth Structure: Blackwell Publishing, Malden, Mass.
358. Stone, D. S., 1991, Analysis of scale exaggeration on seismic profiles: American Association of Petroleum Geologists Bulletin, v. 75, p. 1161-1177.
359. Suppe, J., 1983, Geometry and kinematics of fault-bend folding: American Journal of Science, v. 283, p. 684-721.
360. Suppe, J., 1985, Principles of Structural Geology: Prentice-Hall, Englewood Cliffs, N. J.
361. Suter, H. H., 1947, Exaggeration of vertical scale of geological sections: American Association of Petroleum Geologists Bulletin, v. 31, p. 318-339.
362. Talbot, C. J., 1999, Can field data constrain rock viscosities?: Journal of Structural Geology, v. 21, p. 949-957.
363. Talbot, C. J., & D. Sokoutis, 1992, The importance of incompetence: Geology, v. 20, p. 951-953.
364. Tauxe, L., & G. S. Watson, 1994, The fold test: an eigen analysis approach: Earth and Planetary Science Letters, v. 122, p. 331-341.
365. Tavani, S., F. Storti & F. Salvani, 2005, Rounding hinges to fault-bend folding: geometrical and kinematic implications: Journal of Structural Geology, v. 27, p. 3-22.
366. Taylor, J. R., 1997, An Introduction to Error Analysis: Second Edition, University Science Books, Sausalito, Calif.
367. Tearpock, D. J., & R. E. Bischke, 1991, Applied Subsurface Geologic Mapping: Prentice-Hall, Englewood Cliffs, N. J.
368. Ten Haaf, E., 1959, Graded beds of the northern Apennines: Thesis, University of Groningen.
369. Terzaghi, R. D., 1965, Sources of error in joint surveys: Géotechnique, v. 15, p. 287-304.
370. Tewksbury, B. J., 1996, Using graphics programs to help students understand strain: in D. G. De Paor, editor, Structural Geology and Personal Computers, Pergamon Press, Oxford, p. 57-73.
371. Thiessen, R. L., &W. D. Means, 1980, Classification of fold interference patterns: a reexamination: Journal of Structural Geology, v. 2, p. 311-316.
372. Thompson, R. I., 1981, The nature and significance of large 'blind' thrusts within the northern Rocky Mountains of Canada: in K. R. McClay & N. J. Price, editors, Thrust and Nappe Tectonics, Geological Society of London, Special Publication No. 9, p. 449-462.
373. Thomson, W., & P. G. Tait, 1867, Treatise on Natural Philosophy, vol. 1, Oxford, England.
374. Threet, R. L., 1973a, Classification of translational fault slip: Geological Society of America Bulletin, v. 84, p. 1825-1828.
375. Threet, R. L., 1973, The down-dip method of viewing geological maps to obtain sense of fault separation: Geological Society of America Bulletin, v. 84, p. 4001-4004.
376. Tikoff, B., &H. Fossen, 1996, Visualization of deformation: computer applications for teaching: in D. G. De Paor, editor, Structural Geology and Personal Computers, Pergamon Press, Oxford, p. 75-96.
377. Tolson, G., & F. Correa-Mora, 1996, Manipulation of orientation data using spreadsheet software: in D. G. De Paor, editor, Structural Geology and Personal Computers, Pergamon Press, Oxford, p. 237-243.
378. Townend, J., & M. D. Zoback, 2000, How faulting keeps the crust strong: Geology, v. 28, p. 399-402.
379. Treagus, S. H., 1981, A simple-shear construction from Thomsom & Tait (1867): Journal of Structural Geology, v. 3, p. 291-293.
380. Treagus, S. H., 1982, Anew isogon-cleavage classification and its application to natural and model fold studies: Geological Journal, v. 17, p. 49-64.
381. Treagus, S. H., 1983, Atheory of finite strain variation through contrasting layers, and its bearing on cleavage refraction: Journal of Structural Geology, v. 5, p. 351-368.
382. Treagus, S. H., 1987, Mohr circles for strain, simplified: Geological Journal, v. 22, p. 119-132.
383. Treagus, S. H., 1999, Are viscosity ratios of rocks measurable from cleavage refraction?: Journal of Structural Geology, v. 21, p. 895-901.
384. Triboulet, C., & C. Audren, 1988, Controls on P-T-t deformation path from amphibole zonation during progresssive metamorphism of basic rocks (estuary of the River Vilaine, South Brittany, France): Journal of Metamorphic Geology, v. 6, p. 117-133.
385. Truesdell, C., 1954, The Kinematics of Vorticity: Indiana University Press, Bloomington.
386. Truesdell, C. A., III, 1991, A First Course in Rational Continuum Mechanics, Volume 1 General Concepts: Second Edition, Academic Press, Boston.
387. Truesdell, C., & R. Toupin, 1960, The classical field theories: Encyclopedia of Physics, v. III/1, p. 226-793.
388. Turcotte, D. L., 1997, Fractals and Chaos in Geology and Geophysics: Second Edition, Cambridge University Press, Cambridge.
389. Turcotte, D. L., & G. Schubert, 1982, Geodynamics: Applications of Continuum Physics to Geological Problems: JohnWiley & Sons, New York.
390. Turner, F. J., & L. E. Weiss, 1963, Structural Analysis of Metamorphic Tectonites: McGraw-Hill, New York.
391. Twiss, R. J., 1988, Description and classification of folds in single surfaces: Journal of Structural Geology, v. 10, p. 607-623.
392. Twiss, R. J., & E. M. Moores, 1992, Structural Geology: W. H. Freeman and Company, New York.
393. Vacher, H. L., 1989, The three-point problem in the context of elementary vector analysis: Journal of Geological Education, v. 37, p. 280-287.
394. Vacher, H. L., 1998, Computational geology 1: Significant figures!: Journal of Geoscience Education, v. 46, p. 292-295.
395. Vacher, H. L., 2000, Computational geology 12: Cramer's rule and the three-point problem: Journal of Geoscience Education, v. 48, p. 522-532.
396. Vacher, H. L., 2001a, Computational geology 14: The vector cross product and the three-point problem: Journal of Geoscience Education, v. 49, p. 72-82.
397. Vacher, H. L., 2001b, Computational geology 16: The Taylor series and error propagation: Journal of Geoscience Education, v. 49, p. 305-313 (see correction v. 49, p. 396).
398. Vacher, H. L., 2001c, Computational geology 17: The total differential and error propagation: Journal of Geoscience Education, v. 49, p. 386-396.
399. Verhoogen, J., F. J. Turner, L. E. Weiss, C. Wahrhaftig&W. S. Fyfe, 1970, The Earth: Holt, Rinehart &Winston, New York.
400. Vistelius, A. B., 1966, Structural Diagrams: Pergamon Press, Oxford.
401. Vollmer, F. W., 1990, An application of eigenvalue methods to structural domain analysis: Geological Society of America Bulletin, v. 102, p. 786-791.
402. Vollmer, F. W., 1995, C program for automatic contouring of spherical orientation data using a modified Kamb method: Computers & Geosciences, v. 21, p. 31-49.
403. Waldron, J. W. F., & K. D. Wallace, 2007, Objective fitting of ellipses in the center-to-center (Fry) method of strain analysis: Journal of Structural Geology, v. 29, p. 1430-1444.
404. Wallbrecher, E., 1986, Tektonische und gefügeanalytische Arbeitsweisen: graphische, rechnerische und statistische Verfahren: Ferdinand Enke Verlag, Stuttgart, Germany.
405. Wallbrecher, E., 2005, Fabric8: www. geolsoft. com.
406. Walpole, R. E., & R. H. Myers, 1993, Probability and Statistics for Engineers and Scientists: Fifth Edition, Macmillan, New York.
407. Warner, J., 1969, FORTRAN IV program for construction of pi-diagrams with the Univac 1108 computer: Computer Contributions, Lawrence, Kansas.
408. Warner, F. M., & M. McNeary, 1959, Applied Descriptive Geometry: Fifth Edition, McGraw-Hill, New York.
409. Watson, G. S., 1983, Statistics on Spheres: JohnWiley, New York.
410. Watson, G. S., 1988, The computer simulation treatment of directional data: Recent Researches in Geology, Geological Survey of Canada, v. 12, p. 19-23.
411. Weaver, J. D., 1975, Slickensides and slickenlines: Geological Magazine, v. 112, p. 400-408.
412. Wegmann, C. E., 1929, Beispiele tektonischer Analysen des Grundgebirges in Finnland: Bulletin de la Commission géologique de Finlande no. 87, p. 98-127.
413. Weijermars, R., 1997, Pulsating oblate and prolate three-dimensional strains: Mathematical Geology, v. 29, p. 17-41.
414. Weinberger, R., A. Agnon, H. Ron & Z. Garfunkel, 1995, Rotation about an inclined axis: three dimensional matrices for reconstructing paleomagnetic and structural data: Journal of Structural Geology, v. 17, p. 777-782.
415. Weiss, L. E., 1969, Flexural-slip folding of foliated model materials: in A. J. Baer & D. K. Norris, editors, Research in Tectonics, Geological Survey of Canada, Paper 68-52, p. 294-357.
416. Wellman, H. G., 1962, A graphic method for analysing fossil distortion caused by tectonic deformation: Geological Magazine, v. 99, p. 348-352.
417. Wentworth, C. K., 1930, The plotting and measurement of exaggerated cross-sections: Economic Geology, v. 25, p. 827-831.
418. Wernicke, B., & B. C. Burchfiel, 1982, Modes of extensional tectonics: Journal of Structural Geology, v. 4, p. 105-115.
419. Whisonant, R. C., & C. F. Watts, 1989, Using dip vectors to analyze structural data: Journal of Geological Education, v. 37, p. 187-189.
420. Wilkinson, P., N. J. Soper & A. M. Bell, 1975, Skolithos pipes as strain markers in mylonites: Tectonophysics, v. 28, p. 143-157.
421. Williams, G. D., & T. J. Chapman, 1979, The geometrical classification of noncylindrical folds: Journal of Structural Geology, v. 1, p. 181-185.
422. Williams, P. F., L. B. Goodwin & S. Ralser, 1994, Ductile deformation processes: in P. L. Hancock, editor, Continental Deformation, Pergamon Press, Oxford, p. 1-27.
423. Willis, B., 1893, The mechanics of Appalachian structure: U. S. Geological Survey, Thirteenth Annual Report, Part 2, p. 212-281.
424. Willis, B., & R. Willis, 1934, Geologic Structures: Third Edition, McGraw-Hill Book Company, Inc., New York.
425. Wilson, G., 1961, Tectonic significance of small scale structures and their important to the geologist in the field: Annales de la Société Géologique de Belgique, v. 84, p. 423-548.
426. Wilson, G., 1967, The geometry of cylindrical and conical folds: Proceedings of the Geologists Association, v. 78, p. 179-210.
427. Wilson, G., 1982, Introduction to Small-scale Geological Structures: George Allen & Unwin, London [revision ofWilson, 1961].
428. Wise, D. U., D. E. Dunn, J. T. Engelder, et al., 1984, Fault-related rocks: Suggestions for terminology: Geology, v. 12, p. 391-394.
429. Woodcock, N. H., 1976, The accuracy of structural field measurements: Journal of Geology, v. 84, p. 350-355.
430. Woodward, N. B., S. E. Boyer & J. Suppe, 1985, An Outline of Balanced Cross-sections: Studies in Geology 11, Department of Geological Sciences, University of Tennessee, Knoxville.
431. Yow, J. L., Jr., 1987, Blind zone in the acquisition of discontinuity orientation data: International Journal of Rock Mechanics and Mining Science & Geomechanical Abstracts, v. 24, p. 317-318.
432. Yu, H., & Y. Zheng, 1984, A statistical analysis applied to the Rf/φ method: Tectonophysics, v. 110, p. 151-155.
433. Zimmer, P. W., 1963, Orientation of small diameter drill core: Economic Geology, v. 28, p. 1313-1325.
434. Zoback, M. L., 1992, First and second order patterns of stress in the lithosphere: TheWorld Stress Map Project: Journal of Geophysical Research, v. 97, p. 11703-11728.
435. Zoback, M. L., M. D. Zoback, J. Adams, et al., 1989, Global patterns of tectonic stress: Nature, v. 341, p. 291-298.
436. Zwillinger, D., 1996, Standard Mathematical Tables and Formulae: Thirtieth Edition, CRC Press, Boca Raton, Fla.