Quantitative elastohydrodynamic film forming for a gear oil with complex shear-thinning

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 230, Issue 3, 2016, Pages 289-299

  Bair, Scott ^a   Habchi, Wassim ^b   Sperka, Petr ^c   Hartl, Martin ^c  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b LEBANESE AMERICAN UNIVERSITY   (Lebanon)

^c BRNO UNIVERSITY OF TECHNOLOGY   (Czech Republic)

Author keywords

compressibility; Elastohydrodynamic film thickness; elastohydrodynamic lubrication; rheology; shear thinning

Indexed keywords

COMPRESSIBILITY; FILM THICKNESS; GEARS; LUBRICATING OILS; NON NEWTONIAN FLOW; POINT CONTACTS; RHEOLOGY; SHEAR FLOW; SHEAR THINNING; STRESSES;

ELASTOHYDRODYNAMIC FILM THICKNESS; ELEVATED PRESSURE; LOW-SHEAR VISCOSITY; MECHANICAL DEGRADATION; MINIMUM THICKNESS; POWER LAW EXPONENT; SHEAR DEPENDENCES; SLIDE-TO-ROLL RATIO;

ELASTOHYDRODYNAMIC LUBRICATION;

EID: 84957812479     PISSN: 13506501     EISSN: 2041305X     Source Type: Journal    
DOI: 10.1177/1350650115600185     Document Type: Article

References (40)

1. Spikes H, Jie Z,. History, origins and prediction of elastohydrodynamic friction. Tribol Lett 2014; 56: 1-25.
2. Bair S, Vergne P, Kumar P, et al. Comment on €History, origins and prediction of elastohydrodynamic friction€ by Spikes and Jie. Tribol Lett 2015; 58: 1-8.
3. Liu Y, Wang QJ, Bair S, et al. A quantitative solution for the full shear-thinning EHL point contact problem including traction. Tribol Lett 2007; 28: 171-181.
4. Liu Y, Wang QJ, Krupka I, et al. The shear-thinning elastohydrodynamic film thickness of a two-component mixture. J Tribol 2008; 130: 021502-021502.
5. Krupka I, Bair S, Kumar P, et al. An experimental validation of the recently discovered scale effect in generalized Newtonian EHL. Tribol Lett 2009; 33: 127-135.
6. Krupka I, Kumar P, Bair S, et al. The effect of load (pressure) for quantitative EHL film thickness. Tribol Lett 2010; 37: 613-622.
7. Habchi W, Bair S, Qureshi F, et al. A film thickness correction formula for double-Newtonian shear-thinning in rolling EHL circular contacts. Tribol Lett 2013; 50: 59-66.
8. Habchi W, Vergne P, Bair S, et al. Influence of pressure and temperature dependence of thermal properties of a lubricant on the behaviour of circular TEHD contacts. Tribol Int 2010; 43: 1842-1850.
9. Habchi W, Bair S, Vergne P,. On friction regimes in quantitative elastohydrodynamics. Tribol Int 2013; 58: 107-117.
10. Björling M, Habchi W, Bair S, et al. Towards the true prediction of EHL friction. Tribol Int 2013; 66: 19-26.
11. Björling M, Habchi W, Bair S, et al. Friction reduction in elastohydrodynamic contacts by thin-layer thermal insulation. Tribol Lett 2014; 53: 477-486.
12. Bair S. The first normal stress difference in a shear-thinning motor oil at elevated pressure. STLE Tribol Trans 2015.
13. Bair S, Vergne P, Querry M,. A unified shear-thinning treatment of both film thickness and traction in EHD. Tribol Lett 2005; 18: 145-152.
14. Bair S, Khonsari MM,. Reynolds equations for common generalized Newtonian models and an approximate Reynolds-Carreau equation. Proc IMechE, Part J: J Engineering Tribology 2006; 220: 365-374.
15. Bair SS,. High pressure rheology for quantitative elastohydrodynamics (Tribology series Volume 54), Amsterdam: Elsevier, 2007.
16. Lemmon EW, McLinden MO, Friend DG, Thermophysical properties of fluid systems. In: Linstrom PJ, Mallard WG, (eds). NIST chemistry webbook, NIST Standard Reference Database Number 69, Gaithersburg, MD: National Institute of Standards and Technology, 2003. http://webbook.nist.gov.
17. Murnaghan FD,. The compressibility of media under extreme pressures. Proc Natl Acad Sci USA 1944; 30: 244-247.
18. Assael MJ, Charitidou E, Karagiannidis L,. The thermal conductivity of n-hexadecane + ethanol and n-decane + butanol mixtures. Int J Thermophys 1991; 12: 491-500.
19. Bair S,. Density scaling of the thermal conductivity of a jet oil. Tribol Trans 2014; 57: 647-652.
20. Bair S, Qureshi F,. Accurate measurements of pressure-viscosity behavior in lubricants. Tribol Trans 2002; 45: 390-396.
21. Yasutomi S, Bair S, Winer WO,. An application of a free volume model to lubricant rheology I-dependence of viscosity on temperature and pressure. J Tribol 1984; 106: 291-302.
22. Williams ML, Landel RF, Ferry JD,. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. J Am Chem Soc 1955; 77: 3701-3707.
23. Bair S, Mary C, Bouscharain N, et al. An improved Yasutomi correlation for viscosity at high pressure. Proc IMechE, Part J: J Engineering Tribology 2013; 227: 1056-1060.
24. Paredes X, Fandiño O, Comuñas MJ, et al. Study of the effects of pressure on the viscosity and density of diisodecyl phthalate. J Chem Thermodyn 2009; 41: 1007-1015.
25. Bair S. Recent developments in high-pressure rheology of lubricants. In: The third body concept: Interpretation of tribological phenomena, Proceedings of the 22nd Leeds-Lyon symposium on tribology, Lyon, pp.169-187. Amsterdam: Elsevier.
26. Bair S, Qureshi F,. Time-temperature-pressure superposition in polymer thickened liquid lubricants. J Tribol 2014; 136: 021505-021505.
27. Krupka I, Bair S, Kumar P, et al. Mechanical degradation of the liquid in an operating EHL contact. Tribol Lett 2011; 41: 191-197.
28. Bair S,. Rheology and high-pressure models for quantitative elastohydrodynamics. Proc IMechE, Part J: J Engineering Tribology 2009; 223: 617-628.
29. Kim WK, Hirai N, Ree T, et al. Theory of non-Newtonian flow. III. A method for analyzing non-Newtonian flow curves. J Appl Phys 1960; 31: 358-361.
30. Hersey MD, Zimmer JC,. Heat effects in capillary flow at high rates of shear. J Appl Phys 1937; 8: 359-363.
31. Hahn SJ, Ree T, Eyring H,. Flow mechanism of thixotropic substances. Ind Eng Chem 1959; 51: 856-857.
32. Habchi W, Eyheramendy D, Vergne P, et al. Stabilized fully-coupled finite elements for elastohydrodynamic lubrication problems. Adv Eng Softw 2012; 46: 4-18.
33. Yang P, Wen S,. A generalized Reynolds equation for non-Newtonian thermal elastohydrodynamic lubrication. ASME J Tribol 1990; 112: 631-636.
34. Hartl M, Krupka I, Liska M,. Differential colorimetry: Tool for evaluation of chromatic interference patterns. Optic Eng 1997; 36: 2384-2391.
35. Hartl M, Krupka I, Fuis V, et al. Experimental study of lubricant film thickness behavior in the vicinity of real asperities passing through lubricated contact. Tribol Trans 2004; 47: 376-385.
36. Hamrock BJ, Dowson D,. Isothermal elastohydrodynamic lubrication of point contacts: Part III-fully flooded results. J Tribol 1977; 99: 264-275.
37. Bair S, Fernandez J, Khonsari MM, et al. Letter to the editor. Proc IMechE, Part J: J Engineering Tribology 2009; 223.
38. Bair S, Qureshi F, Kotzalas M,. The low-shear-stress rheology of a traction fluid and the influence on film thickness. Proc IMechE, Part J: J Engineering Tribology 2004; 218: 95-98.
39. Abdel-Wahab M, Giesekus H, Zidan M,. A new eccentric-cylinder rheometer. Rheol Acta 1990; 29: 16-22.
40. Kudish II, Airapetyan RG,. Lubricants with non-Newtonian rheology and their degradation in line contacts. J Tribol 2004; 126: 112-124.