History, origins and prediction of elastohydrodynamic friction

Tribology Letters

Volumn 56, Issue 1, 2014, Pages 1-25

  Spikes, Hugh ^a   Jie, Zhang ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

Carreau; Elastohydrodynamic friction; Eyring; Lubricant rheology; Traction

Indexed keywords

ELECTRIC TRACTION; FRICTION; SHEAR FLOW; SHEAR STRESS; VISCOSITY MEASUREMENT;

CARREAU; ELASTOHYDRODYNAMIC CONTACT; EYRING; FRICTION MEASUREMENTS; LUBRICANT RHEOLOGY; MEASUREMENT AND ANALYSIS; RHEOLOGICAL MODELING; WIDE TEMPERATURE RANGES;

TRIBOLOGY;

EID: 84919829766     PISSN: 10238883     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11249-014-0396-y     Document Type: Review

References (115)

1. Gohar, R.: Elastohydrodynamics, 2nd edn. Imperial College Press, London (2002)
2. Spikes, H.A.: Sixty years of EHL. Lubr. Sci. 18, 265-291 (2006)
3. Bair, S., Liu, Y., Wang, Q.J.: The pressure-viscosity coefficient for Newtonian EHL film thickness with general piezoviscous response. Trans. ASME J. Tribol. 128, 624-631 (2006)
4. Foord, C.A., Hamman, W.C., Cameron, A.: Evaluation of lubricants using optical elastohydrodynamics. ASLE Trans. 11, 31-43 (1968)
5. Van Leeuwen, H.: The determination of the pressure - viscosity coefficient of a lubricant through an accurate film thickness formula and accurate film thickness measurements. Proc. Inst. Mech. Eng. J. 223, 1143-1163 (2009)
6. Hamrock, B.J., Dowson, D.: Ball Bearing Lubrication. The Elastohydrodynamics of Elliptical Contacts. Wiley, New York (1981)
7. Habchi, W., Bair, S., Qureshi, F., Covitch, M.: A film thickness correction formula for double-Newtonian shear-thinning in rolling EHL circular contacts. Tribol. Lett. 50, 59-66 (2013)
8. Bair, S.: Shear thinning correction for rolling/sliding elastohydrodynamic film thickness. Proc. Inst. Mech. Eng. J219, 69-74 (2005)
9. Grubin, A.N.: Fundamentals of the hydrodynamic theory of lubrication of heavily loaded cylindrical surfaces. In: Ketova, Kh.F. (ed) Proceedings of Symposium, Investigation of the Contact of Machine Components. Central Scientific Research Institute for Technology and Mechanical Engineering, Book No. 30, pp. 115-166, Moscow, 1949, D.S.I.R Trans. No. 337
10. Lewicki, W.: Some physical aspects of lubrication in rolling bearings and gears. Engineer 200, 176-178 (1955)
11. Crook, A.W.: The lubrication of rollers. Phil. Trans. R. Soc. Lond. A250, 387-409 (1958)
12. MacConochie, I.O., Cameron, A.: The measurement of oil film thickness in gear teeth. Trans. ASME J. Basic Eng. 82, 29-34 (1960)
13. Crook, A.W.: The lubrication of rollers, III - a theoretical discussion of friction and temperatures in the oil film. Phil. Trans. R. Soc. A254, 237-258 (1961)
14. Smith, F.W.: The effect of temperature in concentrated contact lubrication. ASLE Trans. 5, 142-148 (1962)
15. Crook, A.W.: The lubrication of rollers, IV - measurements of friction and effective viscosity. Phil. Trans. R. Soc. A255, 281-312 (1963)
16. Harrison, G., Trachman, E.G.: The role of compressional viscoelasticity in the lubrication of rolling contacts. Trans. ASME J. Lubr. Technol. 94, 306-312 (1972)
17. Bell, J.C., Kannel, J.W., Allen, C.M.: The rheological behaviour of the lubricant in the contact zone of a rolling contact system. Trans. ASME J. Basic Eng. 86, 423-434 (1964)
18. Jefferis, J.A., Johnson, K.L.: First paper: sliding friction between lubricated rollers. Proc. Inst. Mech. Eng. 182, 281-291 (1967)
19. Johnson, K.L., Cameron, R.: Fourth paper: shear behaviour of elastohydrodynamic oil films at high rolling contact pressures. Proc. Inst. Mech. Eng. 182, 307-330 (1967)
20. Johnson, K.L., Roberts, A.D.: Observations of viscoelastic behaviour of an elastohydrodynamic lubricant film. Proc. R. Soc. Lond. A337, 217-242 (1974)
21. Tevaarwerk, J., Johnson, K.L.: A simple non-linear constitutive equation for elastohydrodynamic oil films. Wear 35, 345-356 (1975)
22. Johnson, K.L., Tevaarwerk, J.L.: Shear behaviour of elastohydrodynamic films. Proc. R. Soc. Lond. A356, 215-238 (1977)
23. Johnson, K.L.: Introductory review of lubricant rheology and traction. In: Proceedings of 5th Leeds-Lyon Symposium on Tribology, Elastohydrodynamic Lubrication and Related Topics, pp. 155-161. MEP, London (1978)
24. Johnson, K.L., Nayak, L., Moore, A.: Determination of elastic shear modulus of lubricants from disc machine traction tests. In: Proceedings of 5th Leeds-Lyon Symposium on Tribology, Elastohydrodynamic Lubrication and Related Topics, pp. 204-208. MEP, London (1978)
25. Conroy, T.F., Johnson, K.L., Owen, S.: Viscosity in the thermal region of EHD traction. In: Proc 6th Leeds-Lyon Symposium on Tribology, Thermal Effects in Tribology, pp. 219-227. MEP, London (1980)
26. Adams, D.R., Hirst, W.: Frictional traction in elastohydrodynamic lubrication. Proc. R. Soc. A332, 505-525 (1973)
27. Hirst, W., Moore, A.J.: Non-Newtonian behaviour in elastohydrodynamic lubrication. Proc. R. Soc. A337, 101-121 (1974)
28. Hirst, W., Moore, A.J.: The elastohydrodynamic behaviour of polyphenyl ether. Proc. R. Soc. A344, 403-426 (1975)
29. Hirst, W., Moore, A.J.: Elastohydrodynamic lubrication at high pressures. Proc. R. Soc. A360, p403-p425 (1978)
30. Hirst, W., Moore, A.J.: Elastohydrodynamic lubrication at high pressures. II - Non-Newtonian behaviour. Proc. R. Soc. A365, 537-565 (1979)
31. Hirst, W., Moore, A.J.: The effect of temperature on traction in elastohydrodynamic lubrication. Phil. Trans. R. Soc. Lond. A298, 183-208 (1980)
32. Plint, M.A.: Traction in elastohydrodynamic contacts. Proc. Inst. Mech. Eng. 182, 300-306 (1967)
33. Allen, C.W., Townsend, D.P., Zaretsky, E.V.: Elastohydrodynamic lubrication of a spinning ball in a nonconforming groove. Trans. ASME J. Lubr. Technol. 92, 89-96 (1970)
34. Archard, J.F.: The temperature of rubbing surfaces. Wear 2, 438-455 (1959)
35. Hirst, W., Richmond, J.W.: Traction in elastohydrodynamic contacts. Proc. Inst. Mech. Eng. C202, 129-144 (1988)
36. Evans, C.R., Johnson, K.L.: The rheological properties of elastohydrodynamic lubricants. Proc. Inst. Mech. Eng. C200, 303-312 (1986)
37. Evans, C.R., Johnson, K.L.: Regimes of traction in elastohydrodynamic lubrication. Proc. Inst. Mech. Eng. C200, 313-324 (1986)
38. LaFountain, A.R., Johnston, G.J., Spikes, H.A.: The elastohydrodynamic traction of synthetic base oil blends. Tribol. Trans. 44, 648-656 (2001)
39. Moore, A.J.: The derivation of basic liquid flow properties from disc machine traction tests. In: Proceedings of 7th Leeds-Lyon Symposium on Tribology, Friction and Traction, pp. 289-295. MEP, London (1981)
40. Muraki, M., Dong, D.: Derivation of basic rheological parameters from experimental elastohydrodynamic lubrication traction curves of low-viscosity lubricants. Proc. Inst. Mech. Eng. 213, 53-61 (1999)
41. Fang, N., Chang, L., Webster, M.N., Jackson, A.: A non-averaging method of determining the rheological properties of traction fluids. Tribol. Intern 33, 751-760 (2000)
42. Fang, N., Chang, L., Johnson, G.J., Webster, M.N., Jackson, A.: An experimental/theoretical approach to modelling the viscous behaviour of liquid lubricants in elastohydrodynamic lubrication contacts. Proc. Inst. Mech. Eng. J215, 311-318 (2001)
43. Bair, S., Winer, W.O.: The high shear stress rheology of liquid lubricants at pressures of 2 to 200 MPa. Trans. ASME J. Tribol. 112, 253-256 (1990)
44. Bair, S.: The nature of the logarithmic traction gradient. Tribol. Intern. 35, 591-597 (2002)
45. Bair, S.: Rheology and high-pressure models for quantitative elastohydrodynamics. Proc. Inst. Mech. Eng. J223, 617-628 (2009)
46. Houpert, L., Flamand, L., Berthe, D.: Rheological and thermal effects in lubricated EHD contacts. Trans. ASME J. Tribol 103, 526-532 (1981)
47. Wang, S.H., Zhang, H.H.: Combined effects of thermal and non-Newtonian character of lubricant on pressure, film profile, temperature rise, and shear stress in EHL. Trans. ASME J. Tribol. 109, 666-670 (1987)
48. Sui, P.C., Sadeghi, F.: Non-Newtonian thermal elastohydrodynamic lubrication. Trans. ASME J. Tribol. 113, 390-396 (1991)
49. Wang, S., Cusano, C., Conry, T.F.: Thermal analysis of elastohydrodynamic lubrication of line contacts using the Ree-Eyring fluid model. Trans. ASME J. Tribol. 113, 232-242 (1991)
50. Khonsari, M.M., Hua, D.Y.: Thermal elastohydrodynamic analysis using a generalized non-Newtonian formulation with application to Bair-Winer constitutive equation. Trans. ASME J. Tribol. 116, 37-46 (1994)
51. Sharif, K.J., Evans, H.P., Snidle, R.W., Newall, J.P.: Modeling of film thickness and traction in a variable ratio traction drive rig. Trans. ASME J. Tribol. 126, 92-104 (2004)
52. Otero, J.E., Morgado, P.L., Tanarro, E.C., de la Guerra Ochoa, E., Lantada, A.D., Munoz-Guijosa, J.M., Sanz, J.M.: Analytical model for predicting the friction coefficient in point contacts with thermal elastohydrodynamic lubrication. Proc. Inst. Mech. Eng. J. 225, 181-191 (2011)
53. Novak, J.D., Winer, W.O.: Some measurements of high pressure lubricant rheology. Trans. ASME J. Lubr. Technol. 90, 580-590 (1968)
54. Jakobsen, J., Winer, W.O.: High shear stress behaviour of some representative lubricants. Trans. ASME J. Lubr. Technol. 97, 479-485 (1975)
55. Bair, S., Winer, W.O.: Shear strength measurement of lubricants at high pressure. Trans. ASME J. Lubr.Technol. 101, 251-257 (1979)
56. Bair, S., Winer, W.O.: A rheological model for elastohydrodynamic contacts based on primary laboratory date. Trans. ASME J. Lubr. Technol. 101, 258-264 (1979)
57. Bair, S., Winer, W.O.: Some observations in high pressure rheology of lubricants. Trans. ASME J. Lubr. Technol. 104, 357-364 (1982)
58. Ramesh, K.T., Clifton, R.J.: A pressure-shear plate impact experiment for studying the rheology of lubricants at high pressures and high shearing rates. Trans. ASME J. Tribol. 109, 215-222 (1987)
59. Bair, S., Winer, W.O.: The high pressure high shear stress rheology of liquid lubricants. Trans. ASME J. Tribol. 112, 1-9 (1992)
60. Bair, S., Winer, W.O.: A new high pressure, high shear stress viscometer and results for lubricants. Tribol. Trans. 36, 721-725 (1993)
61. Bair, S.: Recent developments in high pressure rheology of lubricants. Proceedings of 21st Leeds-Lyon Symposium on Tribology, Lubricants and Lubrication, pp. 169-187. Elsevier Science B.V, Amsterdam (1995)
62. Bair, S.: The high pressure rheology of some simple model hydrocarbons. Proc. Inst. Mech. Eng. J. 216, 139-149 (2002)
63. Bair, S., Khonsari, M.M.: Reynolds equations for common generalized Newtonian models and an approximate Reynolds-Carreau equation. Proc. Inst. Mech. Eng. J. 220, 365-374 (2006)
64. Bair, S., Vergne, P., Querry, M.: A unified shear-thinning treatment of both film thickness and traction in EHD. Tribol. Lett. 18, 145-152 (2005)
65. Eyring, H.: Viscosity, plasticity, and diffusion as examples of absolute reaction rates. J. Chem. Phys. 4, 283-291 (1936)
66. Ewell, R.H.: The reaction rate theory of viscosity and some of its applications. J. Appl. Phys. 9, 252-269 (1938)
67. Kincaid, J.F., Eyring, H., Stearn, A.E.: The theory of absolute reaction rates and its application to viscosity and diffusion in the liquid state. Chem. Rev. 28, 301-365 (1941)
68. Kauzmann, W., Eyring, H.: The viscous flow of large molecules. J. Am. Chem. Soc. 62, 3113-3125 (1940)
69. Powell, R.E., Roseveare, W.E., Eyring, H.: Diffusion, thermal conductivity, and viscous flow of liquids. Ind. Eng. Chem. 33, 430-435 (1941)
70. Ree, T., Eyring, H.: Theory of non-Newtonian flow. I. Solid plastic system. J. Appl. Phys. 26, 793-800 (1955)
71. Ree, F., Ree, T., Eyring, H.: Relaxation theory of transport problems in condensed systems. Ind. Eng. Chem. 50, 1036-1040 (1958)
72. Bell, J.C.: Lubrication of rolling surfaces by a Ree-Eyring fluid. ASLE Trans. 5, 160-171 (1962)
73. Bair, S.: Actual Eyring models for thixotropy and shear-thinning: experimental validation and application to EHD. Trans ASME J. Tribol. 126, 728-732 (2004)
74. Prandtl, L.: Ein Gedankenmodell zur kinetischen Theorie der festen Körper. Z. für Angew. Math. und Mech. 8, 85-106 (1928)
75. Popov, V.L., Gray, J.A.T.: Prandtl-Tomlinson model: history and applications in friction, plasticity, and nanotechnologies. ZAMM-J. Appl. Math. Mech. 92, 683-708 (2012)
76. Sutterby, J.L.: Laminar converging flow of dilute polymer solutions in conical sections: part I. Viscosity data, new viscosity model, tube flow solution. AIChE J. 12, 63-68 (1966)
77. Cross, M.M.: Rheology of non-Newtonian fluids: a new flow equation for pseudoplastic systems. J. Coll. Sci. 20, 417-443 (1965)
78. Morris, E.R.: Shear-thinning of 'random coil' polysaccharides: characterisation by two parameters from a simple linear plot. Carbohydr. Polym. 13, 85-96 (1990)
79. Powell, R.E., Eyring, H.: Mechanism for relaxation theory of viscosity. Nature 154, 427-428 (1944)
80. Lodge, A.S.: Constitutive equations from molecular network theories for polymer solutions. Rheol. Acta 7, 379-392 (1968)
81. Carreau, P.J.: Rheological equations from molecular network theories. Trans. Soc. Rheol. 16, 99-127 (1972)
82. Yasuda, K.Y., Armstrong, R.C., Cohen, R.E.: Shear flow properties of concentrated solutions of linear and star branched polystyrenes. Rheol. Acta 20, 163-178 (1981)
83. Bair, S.: Measurement of real non-Newtonian response for liquid lubricants under moderate pressures. Proc. Inst. Mech. Eng. J215, 223-233 (2001)
84. Warburg, E., Sachs, J.: Ueber den Einfluss der Dichtigkeit auf die Viscosität tropfbarer Flüssigkeiten. Ann. der Physik 258, 518-522 (1884)
85. Barus, C.: Isothermals, isopiestics and isometrics relative to viscosity. Am. J. Sci. 266, 87-96 (1893)
86. Pressure-viscosity Report, A.S.M.E.: Viscosity and density of over 40 lubricating fluids of known composition at pressures to 150, 000 psi and temperatures to 425F. ASME, New York (1953)
87. Roelands, C.J.A.: Correlational aspects of the viscosity-temperature-pressure relationship of lubricating oils. PhD thesis, Techn. Univ. of Delft (1966)
88. Paluch, M., Dendzik, Z., Rzoska, S.J.: Scaling of high-pressure viscosity data in low-molecular-weight glass-forming liquids. Phys. Rev. B 60, 2979-2982 (1999)
89. Doolittle, A.K.: Studies in Newtonian flow. II. The dependence of the viscosity of liquids on free-space. J. Appl. Phys. 22, 1471-1475 (1951)
90. Cohen, M.H., Turnbull, D.: Molecular transport in liquids and glasses. J. Chem. Phys. 31, 1164-1169 (1959)
91. Yasutomi, S., Bair, S., Winer, W.O.: An application of a free volume model to lubricant rheology I-dependence of viscosity on temperature and pressure. Trans. ASME J. Tribol. 106, 291-302 (1984)
92. Bair, S., Kottke, P.: Pressure-viscosity relationships for elastohydrodynamics. Tribol. Trans. 46, 289-295 (2003)
93. Larsson, R., Anderson, O.: Lubricant thermal conductivity and heat capacity under high pressure. Proc. Inst. Mech. Eng. J. 214, 337-342 (2000)
94. Bair, S., Khonsari, M., Winer, W.O.: High-pressure rheology of lubricants and limitations of the Reynolds equation. Tribol. Intern. 31, 573-586 (1998)
95. Bair, S.: Reference liquids for quantitative elastohydrodynamics: selection and rheological characterization. Tribol. Lett. 22, 197-206 (2006)
96. Harris, K.R.: Temperature and pressure dependence of the viscosities of 2-ethylhexyl benzoate, bis (2-ethylhexyl) phthalate, 2, 6, 10, 15, 19, 23-hexamethyltetracosane (squalane), and diisodecyl phthalate. J. Chem. Eng. Data 54, 2729-2738 (2009)
97. Harris, K.R., Bair, S.: Temperature and pressure dependence of the viscosity of diisodecyl phthalate at temperatures between (0 and 100) C and at pressures to 1 GPa. J. Chem. Eng. Data 52, 272-278 (2007)
98. Bair, S.: The high-pressure, high-shear stress rheology of a polybutene. J. Non-Newt. Fluid Mech. 97, 53-65 (2001)
99. Clifton, R.J.: Discussion to paper Bair, S., Winer, W.O.: The high shear stress rheology of liquid lubricants at pressures of 2 to 200 MPa. Trans. ASME J. Tribol. 112, 253-256 (1990)
100. Bair, S., Winer. W.O.: The pressure-viscosity coefficient at Hertz pressure and its relation to concentrated contact traction. Proceedings of 26th Leeds-Lyon Symposium on Tribology, Thinning Films and Tribological Interfaces. Elsevier Science B.V., Tribology Series vol. 38, pp. 433-443. Elsevier Science B.V., Amsterdam (2001)
101. Bair, S., Vergne, P., Marchetti, M.: The effect of shear-thinning on film thickness for space lubricants. Tribol. Trans. 45, 330-333 (2002)
102. Bair, S., Qureshi, F.: The generalised Newtonian fluid model and elastohydrodynamic film thickness. Trans. ASME J. Tribol. 125, 70-75 (2003)
103. Eyring, H., Ree, T., Hirai, N.: The viscosity of high polymers - the random walk of a group of connected segments. Proc. Nat. Acad. Sci. USA 44, 1213-1217 (1958)
104. Muraki, M., Konishi, S.: Shear behavior of low-viscosity fluids in EHL contacts (Part 1): theoretical analysis with a thermal Eyring model. Jpn. J. Tribol. 38, 1085-1096 (1993)
105. Bair, S., Qureshi, F., Winer, W.O.: Observations of shear localization in liquid lubricants under pressure. Trans. ASME J. Tribol. 115, 507-514 (1993)
106. Ponjavic, A., Mare, L., Wong, J.S.: Effect of pressure on the flow behavior of polybutene. J. Polym. Sci., Part B: Polym. Phys. 52, 708-715 (2014)
107. Ponjavic, A., Wong, J.S.: The effect of boundary slip on elastohydrodynamic lubrication. RSC Adv. 4, 20821-20829 (2014)
108. Todd, B.D., Daivis, P.J.: Homogeneous non-equilibrium molecular dynamics simulations of viscous flow: techniques and applications. Mol. Simul. 33, 189-229 (2007)
109. Ashurst, W.T., Hoover, W.G.: Shear viscosity via periodic nonequilibrium molecular dynamics. Phys. Lett. 61A, 175-177 (1977)
110. Berker, A., Chynoweth, S., Klomp, U.C., Michopoulos, Y.: Non-equilibrium molecular dynamics (NEMD) simulations and the rheological properties of liquid n-hexadecane. J. Chem. Soc., Faraday Trans. 88, 1719-1725 (1992)
111. Kioupis, L.I., Maginn, E.J.: Impact of molecular architecture on the high-pressure rheology of hydrocarbon fluids. J. Phys. Chem. B 104, 7774-7783 (2000)
112. Lacks, D.J.: Energy landscapes and the non-Newtonian viscosity of liquids and glasses. Phys. Rev. Lett. 87, 225-502 (2001)
113. Rottler, J., Robbins, M.O.: Shear yielding of amorphous glassy solids: effect of temperature and strain rate. Phys. Rev. E 68.1, 011507 (2003)
114. Borzsak, I., Cummings, P.T., Evans, D.J.: Shear viscosity of a simple fluid over a wide range of strain rates. Mol. Phys. 100, 2735-2738 (2002)
115. Bair, S., McCabe, C., Cummings, P.T.: Calculation of viscous EHL traction for squalane using molecular simulation and rheometry. Tribol. Lett. 13, 251-254 (2002)