Time-temperature-pressure superposition in polymer thickened liquid lubricants

Journal of Tribology

Volumn 136, Issue 2, 2014, Pages

  Bair, Scott ^a   Qureshi, Farrukh ^b  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b LUBRIZOL CORPORATION   (United States)

Author keywords

Elastohydrodynamics; High pressure; Polymer blends; Rheology

Indexed keywords

EID: 84894435445     PISSN: 07424787     EISSN: 15288897     Source Type: Journal    
DOI: 10.1115/1.4026591     Document Type: Article

References (34)

1. Bair, S., Vergne, P., and Querry, M., 2005, "A Unified Shear-Thinning Treatment of Both Film Thickness and Traction in EHD," Tribol. Lett., 18(2), pp. 145-152. (Pubitemid 40374121)
2. Liu, Y., Wang, J. Q., Bair, S., and Vergne, P., 2007, "A Quantitative Solution for the Full Shear-Thinning EHL Point Contact Problem Including Traction," Tribol. Lett., 28(2), pp. 171-181.
3. Habchi, W., Vergne, P., Bair, S., Andersson, O., Eyheramendy, D., and Morales-Espejel, G. E., 2010, "Influence of Pressure and Temperature Dependence of Thermal Properties of a Lubricant on the Behaviour of Circular TEHD Contacts," Tribol. Int., 43, pp. 1842-1850.
4. Habchi, W., Bair, S., and Vergne, P., 2013, "On Friction Regimes in Quantitative Elastohydrodynamics," Tribol. Int., 58, pp. 107-117.
5. Krupka, I., Bair, S., Kumar, P., Khonsari, M. M., and Hartl, M., 2009, "An Experimental Validation of the Recently Discovered Scale Effect in Generalized Newtonian EHL," Tribol. Lett., 33(2), pp. 127-135.
6. Krupka, I., Kumar, P., Bair, S., Khonsari, M. M., and Hartl, M., 2010, "The Effect of Load (Pressure) for Quantitative EHL Film Thickness," Tribol. Lett., 37(3), pp. 613-622.
7. Bair, S., Krupka, I., Sperka, P., and Hartl, M., 2013, "Quantitative Elastohydrodynamic Film Thickness of Mechanically Degraded Oil," Tribol. Int., 64, pp. 33-38.
8. Habchi, W., Bair, S., Qureshi, F., and Covitch, M., 2013, "A Film Thickness Correction Formula for Double-Newtonian Shear-Thinning in Rolling EHL Circular Contacts," Tribol. Lett., 50(1), pp. 59-66.
9. Spikes, H., 2006, "Sixty Years of EHL," Lubr. Sci., 18, pp. 265-291. (Pubitemid 44663299)
10. Bair, S., 2006, "A More Complete Description of the Shear Rheology of High- Temperature, High-Shear Journal Bearing Lubrication," Tribol. Trans.," 49(1), pp. 39-45. (Pubitemid 43135620)
11. Tanner, R. I., 2000, Engineering Rheology, 2nd ed., Oxford University, Oxford, UK, pp. 462-464.
12. Bair S., 2007, High Pressure Rheology for Quantitative Elastohydrodynamics, Elsevier, Amsterdam, pp. 29; 137-149; 163; 171.
13. Guangjun, Z., Ping, H., Shizhu, W., and Huirong, M., 1998, "The Non-Newtonian Effect of Temperature on Hydrodynamic Lubrication Failure," Lubr. Sci., 10(3), pp. 233-245.
14. Hersey, M. D., and Zimmer, J. C., 1937, "Heat Effects in Capillary Flow at High Rates of Shear," J. Appl. Phys., 8(5), pp. 359-363.
15. Schultheisz, C. R., and Leigh, S. D., 2002, "Certification of the Rheological Behavior of SRM 2490, Polyisobutylene Dissolved in 2, 6, 10, 14-Tetramethylpentadecane," NIST, 260(143), pp. 2-27.
16. Kottke, P. A., Bair, S. S., and Winer, W. O., 2005, "Cavitation in Creeping Shear Flows," AIChE J., 51(8), pp. 2150-2170. (Pubitemid 41328513)
17. Bair, S., 2004, "A Rough Shear-Thinning Correction for EHD Film Thickness," Tribol. Trans., 47(3), pp. 361-365.
18. Bird, R. B., Armstrong, R. C., and Hassager, O., 1987, Dynamics of Polymeric Liquids, Wiley, New York, Vol. 1, pp. 106-139.
19. Schurz, J., Vollrath-Rodiger, M., and Krassig, H., 1981, "Rheologische Untersuchungen an Polyacrylnitril-Spinnlosungen: Erweiterung des Viskosimeters HV 6 Fur Hohere Temperaturen," Rheol. Acta, 20(6), pp. 569-578.
20. Bair, S., and Khonsari, M., 1996, "An EHD Inlet Zone Analysis Incorporating the Second Newtonian," ASME J. Tribol., 118(2), pp. 341-343. (Pubitemid 126551585)
21. Bair, S., and Qureshi, F., 2003, "The High Pressure Rheology of Polymer-Oil Solutions," Tribol. Int., 36(8), pp. 637-645.
22. Kumar, P., Khonsari, M. M., and Bair, S., 2009, "Full EHL Simulations Using the Actual Ree-Eyring Model for Shear-Thinning Lubricants," ASME J. Tribol., 131(1), p. 011802.
23. Winter, H. H., 1977, "Viscous Dissipation in Shear Flows of Molten Polymers," Adv. Heat Transfer, 13, pp. 205-267.
24. Bair, S., and Qureshi, F., 2002, "Accurate Measurements of Pressure-Viscosity Behavior in Lubricants," Tribol. Trans., 45(3), pp. 390-396.
25. Bair, S., 2012, "Chapter 26: Rheology" Handbook of Lubrication and Tribology: Theory and Design, 2nd ed., R. W. Bruce, ed., CRC Press, Boca Raton, FL, Vol. 2, pp. 26.9-26.10.
26. Selby, T., and Miller, G., 2008, "The Expanding Dimensions of High Shear Rate Viscometry," SAE Technical Paper No. 01-1621.
27. Holtzinger, J., Green, J., Lamb, G., Atkinson, D., and Spikes, H., 2012 "New Method of Measuring Permanent Viscosity Loss of Polymer-Containing Lubricants," Tribol. Trans., 55(5), pp. 631-639.
28. ASTM D445, 1965, "Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids," ASTM International, West Conshohocken, PA.
29. Carslaw, H. S., and Jaeger, J. C., 1959, "Conduction of Heat in Solids: Second Edition," Oxford University, London, UK, p. 75.
30. Warrens, C., Jefferies, A. C., Mufti, R. A., Lamb, G. D., Guiducci, A. E., and Smith, A. G., 2008, "Effect of Oil Rheology and Chemistry on Journal-Bearing Friction and Wear," Proc. Inst. Mech. Eng., Part J, 222(3), pp. 441-450. (Pubitemid 351803779)
31. Bair, S., and Winer, W. O., 1987, "The Influence of Ambient Pressure on the Apparent Shear Thinning of Liquid Lubricants-An Overlooked Phenomenon," Proceedings of the Institution of Mechanical Engineers, International Conference on Tribology, Friction, Lubrication and Wear, 50 Years On, Vol. III, Institution of Mechanical Engineers by Mechanical Engineering Publications, July, 1-3, 1987, Paper No. C90/87.
32. USV Ultra Shear Viscometer Brochure, 2013. Available at: http://www.pcsinstruments. com/pdf/usv/USV-Brochure.pdf
33. Krupka, I., Bair, S., Kumar, P., Svoboda, P., and Hartl, M., 2011, "Mechanical Degradation of the Liquid in an Operating EHL Contact," Tribol. Lett., 41(1), pp. 191-197.
34. Bair, S., Vergne, P., and Marchetti, M., 2002, "The Effect of Shear-Thinning on Film Thickness for Space Lubricants," Tribol. Trans., 45(3), pp. 330-333.