Eco-innovation in industry: Enabling green growth

Eco-Innovation in Industry: Enabling Green Growth

Volumn 9789264077225, Issue , 2010, Pages 1-276

[No Author Info available]

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84957755178     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1787/9789264077225-en     Document Type: Book

References (216)

1. Aoki, M. (2007), "Endogenizing Institutions and Institutional Change", Journal of Institutional Economics, Vol. 3, No. 1, pp. 1-31.
2. Ashford, N. A. (1994), Government Strategies and Policies for Cleaner Production, UNEP, Nairobi.
3. Behrendt, S. et al. (2003), Eco-Service Development: Reinventing Supply and Demand in the European Union, Greenleaf Publishing, Sheffield.
4. Benyus, J. M. (1997), Biomimicry: Innovation Inspired by Nature, William Morrow & Co., New York.
5. Braungart, M. (2002), "The New Industrial Revolution", paper presented at the UNIDO, Venice II - Updating and Fleshing Out the Development Agenda, Venice.
6. Brown, D. et al. (2000), Building a Better Future: Innovation, Technology and Sustainable Development, WBCSD, Geneva.
7. Charter, M. and T. Clark (2007), Sustainable Innovation: Key Conclusions from sustainable Innovation Conferences 2003-2006 Organised by The Centre for Sustainable Design, Centre for Sustainable Design, Farnham.
8. European Commission (EC) (2005), Doing More with Less: Green Paper on Energy Efficiency, Office for Official Publications of the European Communities, Luxembourg.
9. Environmental Protection Agency, United States (EPA) (2002), Innovating for Better Environmental Results: A Strategy to Guide the Next Generation of Innovation at EPA, EPA, Washington, DC.
10. Frondel, M., J. Horbach and K. Rennings (2007), "End-of-Pipe or Cleaner Production?: An empirical Comparison of environmental Innovation Decisions across OECD Countries", in N. Johnstone (ed.), Environmental Policy and Corporate Behaviour, Edward Elgar, Cheltenham.
11. Frosch, R. and Y. Gallopoulos (1989), "Strategies for Manufacturing", Scientific American, Vol. 261, pp. 144-152.
12. Garner, A. and G. A. Keoleian (1995), Industrial Ecology: An Introduction, National Pollution Prevention Center for Higher Education, University of Michigan, Ann Arbor, MI.
13. Geels, F. W. (2005), Technological Transitions and System Innovations: A Co-evolutionary and Socio-technical Analysis, Edward Elgar, Cheltenham.
14. Gibbs, D. (2008), "Industrial Symbiosis and Eco-industrial Development: An Introduction", Geography Compass, Vol. 2, No. 4, pp. 1138-1154.
15. Gray, C. and M. Charter (2006), Remanufacturing and Product Design, Centre for Sustainable Design, Farnham.
16. Global Reporting Initiative (GRI) and KPMG (2008), Reporting the Business Implications of Climate Change in Sustainability Reports, GRI and KPMG, Amsterdam.
17. Grubb, M. (2004), "Technology Innovation and Climate Change Policy: An Overview of Issues and Options", Keio Economic Studies, Vol. 41, No. 2, pp. 103-132.
18. 2 Emissions, OECD/IEA, Paris.
19. International Organization for Standardization (ISO) (2004), ISO 14001:2004 Environmental Management Systems: Requirements with Guidance for Use, ISO, Geneva.
20. International Union for Conservation of Nature (IUCN) (1980), World Conservation Strategy: Living Resource Conservation for Sustainable Development, IUCN, Geneva.
21. Jelinski, L. W. et al. (1992), "Industrial ecology: concepts and approaches", Proceedings of the National Academy of Sciences, Vol. 89, No. 3, pp. 793-797.
22. Johnstone, N. et al. (2007), "'Many a Slip 'twixt the Cup and the Lip': Direct and Indirect Public Policy Incentives to Improve Corporate Environmental Performance", in N. Johnstone (ed.), Environmental Policy and Corporate Behaviour, Edward Elgar, Cheltenham.
23. Jorna, R. J. et al. (2006), Sustainable Innovation: The Organisational, Human and Knowledge Dimension, Greenleaf Publishing, Cheltenham.
24. Kuehr, R. (2007), "Towards a Sustainable Society: United Nations University's Zero Emissions Approach", Journal of Cleaner Production, Vol. 15, No. 13-14, pp. 1198-1204.
25. Kurzinger, E. (2004), "Capacity Building for Profitable Environmental Management", Journal of Cleaner Production, Vol. 12, No. 3, pp. 237-248.
26. th Framework Programme, MERIT, Maastricht.
27. Maxwell, D., W. Sheate and R. van der Vorst (2006), "Functional and Systems Aspects of the Sustainable Product and Service Development Approach for Industry", Journal of Cleaner Production, Vol. 14, No. 17, pp. 1466-1479.
28. McDonough, W. and M. Braungart (2002), Cradle to Cradle: Remaking the Way We Make Things (1st ed.), North Point Press, New York.
29. Ministry of Economy, Trade and Industry, Japan (METI) (2007), The Key to Innovation Creation and the Promotion of Eco-Innovation, report by the Industrial Science Technology Policy Committee of the Industrial Structure Council, METI, Tokyo.
30. Mont, O. (2002), "Clarifying the Concept of Product-Service System", Journal of Cleaner Production, Vol. 10, No. 3, pp. 237-245.
31. Nasr, N. and M. Thurston (2006), Remanufacturing: A Key Enabler to Sustainable Product Systems, Rochester Institute of Technology, Rochester, NY.
32. OECD (2001), Environmental Outlook 2001, OECD, Paris.
33. OECD (2007), Science, Technology and Industry Scoreboard 2007: Innovation, and Performance in the Global Economy, OECD, Paris.
34. OECD (2008), Environmental Innovation and Global Markets, report for the Working Party on Global and Structural Policies, Environment Policy Committee, OECD, Paris, www.olis.oecd.org/olis/2007doc.nsf/linkto/env-epoc-gsp (2007) 2-final.
35. OECD and Statistical Office of the European Communities (Eurostat) (2005), Oslo Manual: Guidelines for Collecting and Interpreting Innovation Data (3rd ed.), OECD, Paris.
36. Perotto, E. et al. (2008), "Environmental Performance, Indicators and Measurement Uncertainty in EMS Context: A Case Study", Journal of Cleaner Production, Vol. 16, No. 4, pp. 517-530.
37. Porter, M. E. and M. R. Kramer (2006), "Strategy and Society: The Link between Competitive Advantage and Corporate Social Responsibility", Harvard Business Review, Reprint No. R0612D.
38. Porter, M. E. and C. van der Linde (1995), "Green and Competitive: Ending the Stalemate", Harvard Business Review, Reprint No. 95507.
39. Reid, A. and M. Miedzinski (2008), Eco-innovation: Final Report for Sectoral Innovation Watch, Technopolis Group, Brighton.
40. Rennings, K. (2000), "Redefining Innovation: Eco-innovation Research and the Contribution from Ecological Economics", Journal of Ecological Economics, Vol. 32, pp. 319-332.
41. Roy, R. (2000), "Sustainable product-Service Systems", Futures, Vol. 32, No. 3-4, pp. 289-299.
42. Saunders, M. (1997), Strategic Purchasing and Supply Chain Management (2nd ed.), Financial Times Prentice Hall, London.
43. Schmidheiny, S. (1992), Changing Course: A Global Business Perspective on Development and the Environment, MIT Press, Cambridge, MA.
44. Seuring, S. and M. Muller (2007), "Core Issues in Sustainable Supply Chain Management: A Delphi Study", Business Strategy and the Environment, published online on 10 December.
45. Tukker, A. et al. (2006), New Business for Old Europe, Greenleaf Publishing, Cheltenham.
46. United Nations Environment Programme (UNEP) and United Nations Industrial Development Organization (UNIDO) (2004), Guidance Manual: How to Establish and Operate Cleaner Production Centres, UNIDO, Vienna.
47. UNIDO (2002), "The New Industrial Revolution: Michel Braungart at Venice II", UNIDO Scope Weekly News, 20-26 October, pp. 2-3, UNIDO, Vienna.
48. Ven, A. H. van de and T. J. Hargrave (2002), "Social, Technical and Institutional Change", in M. S. Poole and A. H. van de Ven (eds.), Handbook of Organizational Change and Innovation, Oxford University Press, Oxford.
49. Veleva, V. and M. Ellenbecker (2001), "Indicators of Sustainable Production: Framework and Methodology", Journal of Cleaner Production, Vol. 9, No. 6, pp. 519-549.
50. Weizsacker, E. von, A. B. Lovins and L. H. Lovins (1998), Factor Four: Doubling Wealth, Halving Resource Use, New Report to the Club of Rome, Earthscan, London.
51. Wired (2008), "BMW Hydrogen 7 Mono-Fuel Eats Smog for Breakfast", Wired Magazine, 16 April.
52. World Business Council for Sustainable Development (WBCSD) (1996), Eco-efficient Leadership for Improved Economic and Environmental Performance, WBCSD, Geneva.
53. World Commission on Environment and Development (WCED) (1987), Our Common Future, Oxford University Press, Oxford.
54. World Meteorological Organization (WMO) and United Nations Environment Programme (UNEP) (1998), Scientific Assessment of Ozone Depletion: 1998, WMO Ozone Report No. 44, WMO, Geneva.
55. WMO and UNEP (2006), Scientific Assessment of Ozone Depletion: 2006, WMO, Geneva.
56. World Bank (2007), Global Economic Prospects 2007: Managing the Next Wave of Globalization, The World Bank, Washington, DC.
57. American Iron and Steel Institute (AISI) (2005), "ULSAB-Advanced Vehicle Concepts (ULSAB-AVC) Recognized with Energy Efficiency Award", press release, 13 October, AISI, Detroit, MI.
58. Chatterjee, A. (2005), "A Critical Appraisal of the Present Status of Smelting Reduction", Steel Times International, Vol. 29, No. 5, pp. 36-42.
59. City of Paris (2009), "Un Vélib', ça se protégé!", 28 May, City of Paris, France, www.paris.fr.
60. Davies, J. (2007), Big Green: IBM and the ROI of Environmental Leadership, AMR Research Report, AMR Research, Inc., Boston, MA.
61. Economist Intelligence Unit (EIU) (2007), IT and the Environment: A New Item on the CIO's Agenda?, EIU, London, www-05.ibm.com/no/ibm/environment/pdf/grennit-oktober2007.pdf.
62. Environmental Protection Agency, United States (EPA) (2007), Report to Congress on Server and Data Center Energy Efficiency, EPA, Washington, DC.
63. Gupta, S. K. (2004), Corex Process: One of the Dynamic Routes For Gel Making with Special Reference to the Success of JVSL, Indian Steel Joint Plant Committee, Kolkata, http://jpcindiansteel.nic.in/corex.asp.
64. International Iron and Steel Institute (IISI) (2002), Industry as a Partner for Sustainable Development, IISI, Brussels.
65. IISI (2006), Steel: The Foundation of a Sustainable Future Steel - Sustainability Report of the World Steel Industry 2005, IISI, Brussels.
66. Intergovernmental Panel on Climate Change (IPCC) (2007), "Summary for Policymakers", in B. Metz et al. (eds.), Climate Change 2007: Mitigation, Contribution of Working Group III to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change, Cambridge University Press, Cambridge, www.ipcc.ch/pdf/assessment-report/ar4/wg3/ar4-wg3-spm.pdf.
67. Kastner, W. (2007), "Next Generation Corex Technology", Metals & Mining, February, pp. 24-25, Siemens VAI, Linz.
68. Mehta, S. N. (2006), "Server Mania", Fortune, August 7, pp. 69-75.
69. Michelin (2008), Michelin Energy Saver: Press Kit, presented at the Geneva International Motor Show, March, Geneva.
70. 2 Emissions in the Iron and Steel Sector", internal working document for the Steel Committee.
71. OECD (2007), "Environmental Challenges in the Iron and Steel Industry", internal working document for the Steel Committee.
72. 2 Emissions in Industrialized Countries: Troubling Trends through 2005/6, EMBARQ, World Resources Institute, Washington, DC, http://pdf.wri.org/automobile-fuel-economy-co2-industrializedcountries.pdf.
73. th Annual Meeting, 13-17 January, Washington, DC.
74. Wegener, D. (2007), "Emission Reduction in Industry and Infrastructure Will Be Driven Mostly by Energy Savings", presentation at Siemens Media Summit, Siemens, Munich.
75. World Business Council for Sustainable Development (WBCSD) (2008), IBM: Data Center Energy Efficiency, Case Study, WBCSD, Geneva.
76. World Steel Association (worldsteel) (2008), An Advanced High-Strength Steel Family Car, Environmental Case Study: Automotive, WSA, Brussels, www.worldsteel.org.
77. 2 Emissions in the Commercial Sector", Carbon Balance Management, Vol. 1, No. 12.
78. Ahmad, M. M. and N. Dhafr (2002), "Establishing and Improving Manufacturing Performance Measures", Robotics and Computer Integrated Manufacturing, Vol. 18, pp. 171-176.
79. Bringezu, S. (2003), "Industrial Ecology and Material Flow Analysis: Basic Concepts, Policy Relevance and Some Case Studies", in D. Bourg and S. Erkman (eds.), Perspectives on Industrial Ecology, pp. 20-34, Greenleaf Publishing, Sheffield.
80. Canon (2007), Canon Sustainability Report 2007, Canon Inc., Tokyo.
81. Celent (2007), Socially Responsible Investing in the US and Europe: Same Goals but Different Paths, Celent, Paris.
82. Dow Jones Indexes and Sustainable Asset Management (SAM) (2009), Sustainability World Index Guide Book (version 11.1), September, SAM, Zurich.
83. Environmental Protection Agency, United States (EPA) (1995), An Introduction to Environmental Accounting as A Business Management Tool: Key Concepts and Terms, EPA, Washington, DC.
84. European Aluminium Association (EAA) (2006), Sustainability of the European Aluminium Industry 2006, EAA, Brussels.
85. European Chemical Industry Council (CEFIC) (2007), Responsible Care: Building Trust - Annual Report Europe 2006/2007, CEFIC, Brussels.
86. Epstein, M. J. and M. J. Roy (2001), "Sustainability in Action: Identifying and Measuring the Key Performance Drivers", Long Range Planning, Vol. 34, pp. 585-604.
87. Figge, K. and T. Hahn (2004), "Sustainable Value Added: Measuring Corporate Contributions to Sustainability beyond Eco-Efficiency", Ecological Economics, Vol. 48, pp. 173-187.
88. Hamner, B. (2005), Integrating Market-Based Sustainability Indicators and Performance Management Systems, Cleaner Production International, Seattle, WA.
89. Hauschild, M. et al. (2005), "From Life Cycle Assessment to Sustainable Production: Status and Perspectives", International Academy for Production Engineering (CIRP) Annals, Vol. 54, No. 2, pp. 535-555.
90. Huppes, G. (2007), "Why We Need Better Eco-Efficiency Analysis: From Technological Optimism to Realism", Technikfolgenabschätzung: Theorie und Praxis, Vol. 16, No. 3, pp. 38-45.
91. International Federation of Accountants (IFAC) (2005), Environmental Management Accounting, IFCA, New York.
92. International Iron and Steel Institute (IISI) (2005), Steel: The Foundation of a Sustainable Future - Sustainability Report of the World Steel Industry 2005, IISI, Brussels.
93. International Organization for Standardization (ISO) (1997), ISO 14040: Environmental Management - Life Cycle Assessment - Principles and Framework, ISO, Geneva.
94. Jónsdóttir, H. et al. (2005), "Environmental Benchmarking a Tool for Continuous Environmental Improvements in the SME Sector", NT technical report 588, Nordic Innovation Centre, Oslo.
95. Krajnc, D. and P. Glavic (2005a), "A Model for Integrated Assessment of Sustainable Development", Resources, Conservation and Recycling, Vol. 43, pp. 189-208.
96. Krajnc, D. and P. Glavic (2005b), "How to Compare Companies on Relevant Dimensions of Sustainability", Ecological Economics, Vol. 55, pp. 551-563.
97. Kytzia, S. (2003), "Material Flow Analysis as a Tool for Sustainable Management of the Built Environment", in M. Koll-Schretzenmayr, M. Keiner and G Nussbaumer (eds.), The Real and the Virtual World of Spatial Planning, Springer-Verlag, Berlin.
98. Matthews, H. S. and L. B. Lave (2003), "Using Input-Output Analysis for Corporate Benchmarking", Benchmarking: An International Journal, Vol. 10, No. 2, pp. 152-167.
99. McCool, S. F. and GH. Stankey (2004), "Indicators of Sustainability: Challenges and Opportunities at the Interface of Science and Policy", Environmental Management, Vol. 33, No. 3, pp. 294-305.
100. Ministry of Economy, Trade and Industry, Japan (METI) (2008a), "The Response from the Ministry of Economy, Trade and Industry (METI) to the OECD Questionnaire Regarding Tools for Sustainable Manufacturing", METI, Tokyo.
101. METI (2008b) "Green IT Initiative as a Policy to Provide a Solution", presentation at the OECD Workshop on ICTs and Environmental Challenges, 22-23 May, Copenhagen.
102. Ministry of the Environment, Japan (MoE) (2005), Environmental Accounting Guidelines 2005, MoE, Tokyo.
103. OECD (2003), "Composite Indicators of Country Performance: A Critical Assessment", internal working document, OECD, Paris.
104. OECD (2005), Environment at a Glance: OECD Environmental Indicators, OECD, Paris.
105. OECD (2006), "Sustainable Production/Manufacturing Proposal to OECD", proposal submitted by the United States, internal working document for the Committee on Industry and Business Environment.
106. OECD (2007), "A Study on Methodologies Relevant to the OECD Approach on Sustainable Materials Management", OECD, Paris, www.olis.oecd.org/olis/2007doc.nsf/linkto/env-epoc-wgwpr(2007)5-final.
107. OECD (2008a), Measuring Material Flows and Resource Productivity: Synthesis Report, OECD, Paris.
108. OECD (2008b), Measuring Material Flows and Resource Productivity: Volume I. The OECD Guide, OECD, Paris.
109. Olsthoorn, X. et al. (2001), "Environmental Indicators for Business: A Review of the Literature and Standardisation Methods", Journal of Cleaner Production, Vol. 9, pp. 453-463.
110. Palme U. and A. M. Tillman (2008), "Sustainable Development Indicators: How Are They Used in Swedish Water Utilities?", Journal of Cleaner Production, Vol. 16, pp. 1346-1357.
111. Peele, C. (2005), "Substance Flow Analysis and Material Flow Accounts", Background paper for the Framing a Future Chemicals Policy Workshop, Boston.
112. Putnam, D. and A. Keen (2002), "ISO 14031: Environmental Performance Evaluation", draft submitted to Journal of the Confederation of Indian Industry, Altech Environmental Consulting, Toronto.
113. Rao, P. et al. (2006), "Environmental Indicators for Small and Medium Enterprises in the Philippines: An Empirical Research", Journal of Cleaner Production, Vol. 14, pp. 505-15.
114. Richardson, B. J. (2008), Socially Responsible Investment Law: Regulating the Unseen Polluters, Oxford University Press, Oxford.
115. Schaltegger, S. and M. Wagner (2006), Managing and Measuring the Business Case for Sustainability: Capturing the Relationship between Sustainability Performance, Business Competitiveness and Economic Performance, Greenleaf Publishing, Sheffield.
116. Schmidheiny, S. (1992), Changing Course, MIT Press, Cambridge, MA.
117. Schmidt, W. P. (2008), "Developing a Product Sustainability Index", in OECD (ed.), Measuring Sustainable Production, OECD Sustainable Development Studies, pp. 115-126, OECD, Paris.
118. Schwarz, J. et al. (2002), "Use Sustainability Metrics to Guide Decisionmaking", Chemical Engineering Progress, American Institute of Chemical Engineers.
119. Shibaike, N. et al. (2008), "Activity of Japanese Electronics Industry on Environmental Performance Indicator toward Future Standardization", Proceedings of Electronics Goes Green 2008+, pp. 473-477, Fraunhofer IZM, Berlin.
120. Singh, R. K. et al. (2007), "Development of Composite Sustainability Performance Index for Steel Industry", Ecological Indicators, Vol. 7, pp. 565-588.
121. Singh, R. K. (2008), "Developing a Composite Sustainability Index", in OECD (ed.), Measuring Sustainable Production, pp. 97-114.
122. Social Investment Forum (2008), 2007 Report on Socially Responsible Investing Trends in the United States: Executive summary, Social Investment Forum, Washington, DC.
123. The Climate Group (2008) SMART 2020: Enabling the Low Carbon Economy in the Information Age, report by the Climate Group on behalf of the Global e-Sustainability Initiative (GeSI), The Climate Group, London.
124. United Nations Division for Sustainable Development (UNDSD) (2001), Environmental Management Accounting Procedures and Principles, United Nations, New York.
125. United Nations, European Commission, International Monetary Fund, OECD and World Bank (2003), Integrated Environmental and Economic Accounting 2003, United Nations, New York.
126. Veleva, V. and M. Ellenbecker (2001), "Indicators of Sustainable Production: Framework and Methodology", Journal of Cleaner Production, Vol. 9, pp. 519-549.
127. Wackernagel, M. (2008), "Measuring Ecological Footprints", in OECD (ed.), Measuring Sustainable Production, pp. 49-59.
128. World Business Council for Sustainable Development (WBCSD) (2000), Eco-efficiency: Creating More Value with Less Impact, WBCSD, Geneva.
129. Andrews, S. K. T., J. Stearne and J. D. Orbell (2002), "Awareness and Adoption of Cleaner Production in Small to Medium-Sized Businesses in the Geelong Region, Victoria, Australia", Journal of Cleaner Production, Vol. 10, pp. 373-380.
130. Arimura, T. H., A. Hibiki and N. Johnstone (2007), "An Empirical Analysis of Environmental R&D: What Encourages Facilities to be Environmentally Innovative?", in N. Johnstone (ed.), Environmental Policy and Corporate Behaviour, Edward Elgar, Cheltenham, pp. 142-173.
131. Arundel, A. and A. Rose (1999), "The Diffusion of Environmental Biotechnologies in Canada: Adoption Strategies and Cost Offsets", Technovation, Vol. 19, pp. 551-560.
132. Arundel, A, R. Kemp and S. Parto (2007), "Indicators for Environmental Innovation: What and How to Measure", in D. Marinova, D. Annandale and J. Phillimore (eds.), International Handbook on Environment and Technology Management, Edward Elgar, Cheltenham, pp. 324-339.
133. Ashford, N. (1993), "Understanding Technological Responses of Industrial Firms to Environmental Problems: Implications for Government Policy", in K. Fischer and J. Schot (eds.), Environmental Strategies for Industry: International Perspectives on Research Needs and Policy Implications, Island Press, Washington, DC, pp. 277-307.
134. Blum-Kusterer, M. and S. Hussain (2001), "Innovation and Corporate Sustainability: An Investigation into the Process of Change in the Pharmaceuticals Industry", Business Strategy and the Environment, Vol. 10, pp. 300-316.
135. Department of Commerce, United States (DOC) (2005) Pollution Abatement Costs and Expenditures (PACE) Survey Guidelines, Washington, DC.
136. Dodgson, M. and S. Hinze (2000), "Measuring Innovation: Indicators Used to Measure the Innovation Process: Defects and Possible Remedies", Research Evaluation, Vol. 8, No. 2, pp. 101-114.
137. Doyle, D. J. (1992), Building a Stronger Environmental Technology Exploitation Capability in Canada, report for Environment Canada and Industry, Science and Technology Canada, DSS Contract KE144-1-2273/01-SS, July, Doyletech Corporation, Kanata.
138. European Commission (EC) (2004), Stimulating Technologies for Sustainable Development: An Environmental Technologies Action Plan for the European Union, COM (2004) 38 Final, Brussels.
139. EC (2008), European Innovation Scoreboard 2007: Comparative Analysis of Innovation Performance, PRO INNO Europe Paper No. 6, Office for Official Publications of the European Communities, Luxembourg.
140. Frondel, M., J. Horbach and K. Rennings (2004), "End-of-Pipe or Cleaner Production?: An Empirical Comparison of Environmental Innovation Decisions across OECD Countries", ZEW Discussion Paper No. 4-82, ZEW, Mannheim.
141. Frondel, M., J. Horbach and K. Rennings (2007), "End-of-Pipe or Cleaner Production?: An Empirical Comparison of Environmental Innovation Decisions across OECD Countries", Business Strategy and the Environment, Vol. 16, No. 8, pp. 571-584.
142. Garrod, B. and P. Chadwick (1996), "Environmental Management and Business Strategy: Towards a New Strategic Paradigm", Futures, Vol. 28, No. 1, pp. 37-50.
143. Getzer, M. (2002), "The Quantitative and Qualitative Impacts of Clean Technologies on Employment", Journal of Cleaner Production, Vol. 10, pp. 305-319.
144. Green, K., A. McMeekin and A. Irwin (1994), "Technological Trajectories and R&D for Environmental Innovation in UK Firms", Futures, Vol. 26, No. 10, pp. 1047-1059.
145. Griliches Z. (1990), "Patent Statistics as Economic Indicators: A Survey", Journal of Economic Literature, Vol. 28, No. 4, pp. 1661-1707.
146. Horbach, J. (2008), "Determinants of Environmental Innovation: New Evidence from German Panel Data Sources", Research Policy, Vol. 37, pp. 163-173.
147. Johnstone, N. (ed.) (2007), Environmental Policy and Corporate Behaviour, Edward Elgar, Cheltenham.
148. Kleinknecht A., K. van Montfort and E. Brouwer (2002), "The Non-Trivial Choice between Innovation Indicators", Economics of Innovation and New Technologies, Vol. 11, No. 2, pp. 109-121.
149. Lanjouw, J. O. and A. Mody (1996), "Innovation and the International Diffusion of Environmentally Responsive Technology", Research Policy, Vol. 25, pp. 549-571.
150. Lefebvre, E., L. A. Lefebvre and T. Stéphane (2003), "Determinants and Impacts of Environmental Performance in SMEs", R&D Management, Vol. 33, No. 3, pp. 263-283.
151. th Framework Programme, MERIT, Maastricht.
152. Mill, S. and D. Gee (1999), Making Sustainability Accountable: Ecoefficiency, Resource Productivity and Innovation, EEA Topic Report, No. 11/1999, European Environment Agency, Copenhagen.
153. OECD (2003), Pollution Abatement and Control Expenditure in OECD Countries, reportfor the Working Group on Environmental Information and Outlooks, Environment Policy Committee, OECD, Paris, www.oecd.org/dataoecd/41/57/4704311.pdf.
154. OECD (2004), Patents and Innovation: Trends and Policy Challenges, OECD, Paris.
155. OECD and Statistical Office of the European Communities (Eurostat) (2005), Oslo Manual: Proposed Guidelines for Collecting and Interpreting Innovation Data (3rd ed.), OECD, Paris.
156. OECD (2008a), OECD Science, Technology and Industry Scoreboard 2007: Innovation and Performance in the Global Economy, OECD, Paris.
157. OECD (2008b), "Preliminary Indicators of Eco-innovation in Selected Environmental Areas", internal working document for the Working Party on National Environmental Policies, Environment Policy Committee.
158. Pfeiffer, F. and K. Rennings (2001), "Employment Impacts of Cleaner Production: Evidence from a German Study Using Case Studies and Surveys", Business Strategy and the Environment, Vol. 10, pp. 161-175.
159. Pimenova, P. and R. van der Vorst (2004), "The Role of Support Programmes and Policies in Improving SMEs' Environmental Performance in Developed and Transition Economies", Journal of Cleaner Production, Vol. 12, No. 6, pp. 549-559.
160. Rennings, K. and T. Zwick (eds.) (2003), Employment Impacts of Cleaner Production, ZEW Economic Studies, Vol. 21, Heidelberg.
161. Scott, J. T. (2003), Environmental Research and Development: US Industrial Research, the Clean Air Act and Environmental Damage, Edward Elgar, Cheltenham.
162. Steger, U. (1993), "The Greening of the Board Room: How German Companies are Dealing with Environmental Issues", in K. Fischer and J. Schot (eds.), Environmental Strategies for Industry: International Perspectives on Research Needs and Policy Implications, Island Press, Washington, DC, pp. 147-166.
163. Wilén, H. (2008), "Government Budget Appropriations or Outlays on R&D - GBAORD: GBAORD per Inhabitant in the US is Double that of the EU", Statistics in Focus, No. 29/2008, Eurostat, Luxemburg.
164. Williams, H. E., J. Medhurst and K. Drew (1991)", Corporate Strategies for a Sustainable Future", in K. Fischer and J. Schot (eds.), Environmental Strategies for Industry: International Perspectives on Research Needs and Policy Implications, Island Press, Washington, DC, pp. 117-146.
165. World Business Council for Sustainable Development (WBCSD) (2000), Eco-efficiency: Creating More Value with Less Impact, WBCSD, Geneva, www.wbcsd.org/web/publications/eco-efficiency-creating-more-value.pdf.
166. Zutschi, A. and A. Sohal (2004), "Adoption and Maintenance of Environmental Management Systems: Critical Success Factors", Management of Environmental Quality, Vol. 15, No. 4, pp. 399-419.
167. Chesbrough, H. (2006), Open Business Models: How to Thrive in the New Innovation Landscape, Harvard Business School Press, Boston, MA.
168. Dries, I., P. van Humbeek and J. Larosse (2005), "Linking Innovation Policy and Sustainable Development in Flanders", in OECD (2005).
169. European Commission (EC) (2004), Buying Green!: A Handbook on Environmental Public Procurement, Office for Official Publications of the European Communities, Luxembourg.
170. EC (2006), Putting Knowledge into Practice: A Broad-Based Innovation Strategy for the EU, COM (2006) 502 final, 13 September, European Commission, Brussels.
171. EC (2007), Guide on Dealing with Innovative Solutions in Public Procurement: 10 Elements of Good Practice, Commission staff working document, SEC (2007) 280, Brussels, www.proinno-europe.eu/doc/procurement manuscript.pdf.
172. EC (2008), European Innovation Scoreboard 2007: Comparative Analysis of Innovation Performance, PRO INNO Europe paper No. 6, Office of Official Publications of the European Communities, Luxembourg.
173. Edler, J. and L. Georghiou (2007), "Public Procurement and Innovation: Resurrecting the Demand Side", Research Policy, Vol. 36, pp. 949-963.
174. Giessel, J. F. van and G. van der Veen (eds.) (2004), Policy Instruments for Sustainable Innovation, Technopolis, Amsterdam.
175. Heaton, G. R. (2002), Policies for Innovation and the Environment: Toward an Arranged Marriage, paper presented at the six countries programme conference "Innovation Policy and Sustainable Development: Can public innovation incentives make a difference?", 28 February-1 March, Brussels, www.6cp. net/downloads/02brussels-heaton. doc.
176. Hippel, E. von (2005), Democratizing Innovation, MIT Press, Cambridge, MA.
177. Kemp, R. and D. Loorbach (2005), "Dutch Policies to Manage the Transition to Sustainable Energy", in F. Beckenbach et al. (eds.), Jahrbuch Ökologische Ökonomik 4: Innovationen und Nachhaltigkeit, Metropolis Verlag, Marburg, pp. 123-150.
178. Lianes, A. (2009) "Bonus-malus et prime à la casse: ce qu'il faut savoir", DD Magazine, 11 February, www.ddmagazine.com/926-voiture-bonusmalus-ecologique-prime-a-la-casse-conditions-dattribution.html.
179. Loorbach, D., R. van der Brugge and M. Taanman (2008), "Governance in the Energy Transition: Practice of Transition Management in the Netherlands", International Journal of Environmental Technology and Management, Vol. 9, No. 2/3, pp. 294-315.
180. Ministry of Economy, Trade and Industry (METI), Japan (2007), The Key to Innovation Creation and the Promotion of Eco-innovation, report by the Industrial Science Technology Policy Committee of the Industrial Structure Council, METI, Tokyo.
181. OECD (2005), Governance of Innovation Systems, Volume 1: Synthesis Report, OECD, Paris.
182. OECD (2008a), "The Economics of Climate Change", internal working document for the preparation of the Meeting of the Council at Ministerial Level.
183. OECD (2008b), "National Approaches for Promoting Eco-innovation: Country profiles of eight non-EU OECD countries", internal working document for the Working Party on Global and Structural Policies, Environmental Policy Committee.
184. OECD (2008c), "Encouraging Sustainable Manufacturing and Ecoinnovation", internal working document for the Committee on Industry, Innovation and Entrepreneurship.
185. Parliamentary Office of Science and Technology, United Kingdom (2004), Environmental Policy and Innovation, Postnote, No. 212, January, Parliamentary Office of Science and Technology, London, www.parliament.uk/documents/upload/POSTpn212.pdf.
186. Reid, A. and M. Miedzinski (2008), Sectoral Innovation Watch in Europe: Eco-innovation, final report to Europe INNOVA initiative, May, Technopolis Belgium, Brussels, www.technopolisgroup.com/resources/downloads/661-report-final.pdf.
187. Sena, A. A. (2007), "Chemical Leasing and Chemical Management Services", presentation at the Institute for Industrial Environmental Economics (IIIEE) Network Conference, 28 September, Lund.
188. State of Minnesota, United States (2008), "Physical Infrastructure: Detailed Explanation of Metrics and Sources", CareerOneStop website, www.careeronestop.org/Red/AssetMapping/PhysicalInfrastructure.aspx.
189. Tukker, A. et al. (2008), System Innovation for Sustainability 1: Perspectives on Radical Changes to Sustainable Consumption and Production, Greenleaf Publishing, Cheltenham.
190. UNEP/Wuppertal Institute Collaborating Centre on Sustainable Consumption and Production (CSCP), Wuppertal Institute (WI) and German Agency for Technical Co-operation (GTZ) (2006), Policy Instruments for Resource Efficiency: Towards Sustainable Consumption and Production, GTZ, Eschborn.
191. Geels, F. W. (2005), Technological Transitions and System Innovations: A Co-evolutionary and Socio-technical Analysis, Edward Elgar, Cheltenham.
192. Ministry of Economy, Trade and Industry, Japan (METI) (2007), The Key to Innovation Creation and the Promotion of Eco-Innovation, report by the Industrial Science Technology Policy Committee of the Industrial Structure Council, METI, Tokyo.
193. OECD (2005), Governance of Innovation Systems, Volume 1: Synthesis Report, OECD, Paris.
194. OECD (2007), Pollutant Release and Transfer Register (PRTR) brochure, OECD, Paris, www.oecd.org/dataoecd/35/26/39785042.pdf.
195. OECD (2008), "Environmental Innovation and Global Markets", report for the Working Party on Global and Structural Policies, Environment Policy Committee, OECD, Paris, www.olis.oecd.org/olis/2007doc.nsf/linkto/env-epoc-gsp (2007) 2-final.
196. OECD and Statistical Office of the European Communities (Eurostat) (2005), Oslo Manual: Guidelines for Collecting and Interpreting Innovation Data, 3rd edition, OECD, Paris.
197. Center for Environmental Economic Development (CEED) Innovative Approaches to Revenue website, Arcata, CA, www.ceedweb.org.
198. Economy Watch website, Singapore, www.economywatch.com.
199. European Commission (EC) Corporate Social Responsibility website, DG Enterprise and Industry, Brussels, http://ec.europa.eu/enterprise/csr/index-en.htm.
200. EC Green Public Procurement glossary, DG Environment, Brussels, http://ec.europa.eu/environment/gpp/glossary-en.htm.
201. Lowell Center for Sustainable Production (LCSP) website, University of Massachusetts Lowell, Lowell, MA, http://sustainableproduction.org.
202. Mass Balance UK project website, Biffaward, Newark, Nottinghamshire, www.massbalance.org.
203. OECD Glossary of Statistical Terms, http://stats.oecd.org/glossary/index.htm.
204. United Nations Environment Programme (UNEP) Cleaner Production website, UNEP, Paris, www.unep. fr/scp/cp.
205. United Nations Framework Convention on Climate Change (UNFCCC) website, Bonn, www.unfccc.int.
206. United Nations Statistics Division Environment Glossary website, UNSD, New York, http://unstats.un.org/unsd/ENVIRONMENTGL/default.asp.
207. Geels, F. W. (2004), "Understanding System Innovations: A critical literature review and a conceptual synthesis", in B. Elzen, F. W. Geels and K. Green (eds.), System Innovation and the Transition to Sustainability: Theory, evidence and policy, pp. 19-47, Edward Elgar, Cheltenham.
208. Global Reporting Initiative (GRI) (2006), GRI Sustainability Reporting Guidelines (3rd ed.), GRI, Amsterdam, www.globalreporting.org.
209. Levine, R. S., M. T. Hughes and C. R. Mather (n. d.), Thesaurus of Sustainability, Center for Sustainable Cities, University of Kentucky, Lexington, KY, www.cscdesignstudio.com.
210. Lowe, E. A. (2001), Eco-industrial Park Handbook for Asian Developing Countries, A report to the Asian Development Bank, Indigo Development, Oakland, CA, www.indigodev.com/Ecoparks.html.
211. Lund, R. (1998), Remanufacturing: An American Resource, Proceedings of the Fifth International Congress for Environmentally Conscious Design and Manufacturing, 16-17 June, Rochester Institute of Technology, Rochester, NY.
212. Norwegian Ministry of the Environment (1994), Oslo Roundtable on Sustainable Production and Consumption, IISD, Winnipeg, www.iisd.ca/consume/oslo000.html.
213. OECD (1997), National Innovation Systems, OECD, Paris.
214. OECD (2002), Frascati Manual: Proposed Standard Practice for Surveys on Research and Experimental Development, OECD, Paris.
215. OECD and Statistical Office of the European Communities (Eurostat) (2005), Oslo Manual: Guidelines for Collecting and Interpreting Innovation Data, OECD, Paris.
216. UNEP (2002), Product-Service Systems and Sustainability: Opportunities for Sustainable Solutions, UNEP, Paris, www.unep.fr/scp/design/pss.htm.