Residual lignin inhibits thermal degradation of cellulosic fiber sheets

Cellulose

Volumn 23, Issue 1, 2016, Pages 199-212

  Vänskä, Emilia ^a   Vihelä, Tuomas ^a   Peresin, Maria Soledad ^b   Vartiainen, Jari ^b   Hummel, Michael ^a   Vuorinen, Tapani ^a  

^a AALTO UNIVERSITY   (Finland)

^b VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

Author keywords

Antioxidant properties; Refining; Residual lignin; Strength loss; Thermal degradation; Thermal yellowing

Indexed keywords

BLEACHED PULP; BLEACHING; CLEANING; DURABILITY; ELECTROMAGNETIC WAVE ABSORPTION; LIGHT ABSORPTION; LIGHT SCATTERING; LIGNIN; OXYGEN; PULP; PYROLYSIS; RADIATION EFFECTS; REFINING; TENSILE STRENGTH; THERMODYNAMIC STABILITY; UNBLEACHED PULP;

ANTIOXIDANT PROPERTIES; LIGHT ABSORPTION COEFFICIENTS; LIGHT SCATTERING COEFFICIENT S; OXYGEN BARRIER PROPERTIES; OXYGEN TRANSMISSION RATES; RESIDUAL LIGNINS; STRENGTH LOSS; THERMAL YELLOWING;

PULP REFINING;

EID: 84955692717     PISSN: 09690239     EISSN: 1572882X     Source Type: Journal    
DOI: 10.1007/s10570-015-0791-z     Document Type: Article

References (51)

1. Andersson C (2008) New ways to enhance the functionality of paperboard by surface treatment—a review. Pack Technol Sci 21:339–373. doi:10.1002/pts.823
2. Arshanitsa A, Ponomarenko J, Dizhbite T, Andersone A, Gosselink RJA, Van Der Putten J, Lauberts M, Telysheva G (2013) Fractionation of technical lignins as a tool for improvement of their antioxidant properties. J Anal Appl Pyrolysis 103:78–85. doi:10.1016/j.jaap.2012.12.023
3. Baptista C, Robert D, Duarte AP (2008) Relationship between lignin structure and delignification degree in Pinus pinaster kraft pulps. Bioresour Technol 99:2349–2356. doi:10.1016/j.biortech.2007.05.012
4. Beyer M, Lind A, Koch H, Fischer K (1999) Heat-induced yellowing of TCF-bleached sulphite pulps—mechanistic aspects and factors that influence that process. J Pulp Pap Sci 25:47–51
5. Beyer M, Koch H, Fischer K (2006) Role of hemicelluloses in the formation of chromophores during heat treatment of bleached chemical pulps. Macromol Sympos 232:98–106. doi:10.1002/masy.200551412
6. Boeva R, Radeva G, Hinkov P, Hinkov E (2012) Thermal ageing of different kinds of fiber materials: a kinetic study. J Univ Chem Technol Met 47:37–42
7. Borrega M, Tolonen LK, Bardot F, Testova L, Sixta H (2013) Potential of hot water extraction of birch wood to produce high-purity dissolving pulp after alkaline pulping. Bioresour Technol 135:665–671. doi:10.1016/j.biortech.2012.11.107
8. Brebu M, Vasile C (2010) Thermal degradation of lignin—a review. Cell Chem Technol 44:353–363
9. Castle L, Jickells SM, Gilbert J, Harrison N (1990) Migration testing of plastics and microwave-active materials for high-temperature food-use applications. Food Addit Contam 7:779–797. doi:10.1080/02652039009373940
10. Chirat C, De La Chapelle V (1999) Heat- and light-induced brightness reversion of bleached chemical pulps. J Pulp Pap Sci 25:201–205
11. Cui C, Sadeghifar H, Sen S, Argyropoulos DS (2013) Toward thermoplastic lignin polymers; part II: thermal and polymer characteristics of kraft lignin and derivatives. BioResources 8:864–886
12. Dizhbite T, Telysheva G, Jurkjane V, Viesturs U (2004) Characterization of the radical scavenging activity of lignins—natural antioxidants. Bioresour Technol 95:309–317. doi:10.1016/j.biortech.2004.02.024
13. Fardim P, Durán N (2003) Modification of fibre surfaces during pulping and refining as analysed by SEM, XPS and ToF-SIMS. Colloids Surf A Physicochem Eng Asp 223:263–276. doi:10.1016/S0927-7757(03)00149-3
14. Fenner RA, Lephardt JO (1981) Examination of the thermal decomposition of Kraft pine lignin by Fourier transform infrared evolved gas analysis. J Agric Food Chem 29:846–849
15. Ferrer A, Quintana E, Filpponen I, Solala I, Vidal T, Rodríguez A, Laine J, Rojas OJ (2012) Effect of residual lignin and heteropolysaccharides in nanofibrillar cellulose and nanopaper from wood fibers. Cellulose 19:2179–2193. doi:10.1007/s10570-012-9788-z
16. Gierer J (1980) Chemical aspects of kraft pulping. Wood Sci Technol 14:241–266. doi:10.1007/BF00383453
17. Giertz HW (1957) The effects of beating on individual fibres, fundamentals of papermaking fibres. Transactions of the 1st fundamental research symposium, Cambridge, pp 389–409
18. Giertz HW (1964) Contribution to the theory of tensile strength. In: Proceedings of European TAPPI conference on beating, Venice, Italy, pp 39–47
19. Granström A, Eriksson T, Gellerstedt G, Rööst C, Larsson P (2001) Variables affecting the thermal yellowing of TCF-bleached birch kraft pulps. Nor Pulp Pap Res J 16:18–23
20. Gurnagul N, Page DH, Paice MG (1992) The effect of cellulose degradation on the strength of wood pulp fibers. Nord Pulp Pap Res J 7:152–154
21. Hill DJT, Le TT, Darveniza M, Saha T (1995) A study of degradation of cellulosic insulation materials in a power transformer. Part 2: tensile strength of cellulose insulation paper. Polym Degrad Stab 49:429–435. doi:10.1016/0141-3910(95)00100-Z
22. Howard RC, Bichard W (1992) Basic effects of recycling on pulp properties. J Pulp Pap Sci 18:J151–J159
23. Jakab E (1997) Thermal decomposition of wood and cellulose in the presence of solvent vapors. Ind Eng Chem Res 36:2087–2095
24. Johansson C, Bras J, Mondragon I, Nechita P, Plackett D, Šimon P, Svetec DG, Virtanen S, Baschetti MG, Breen C, Clegg F, Aucejo S (2012) Renewable fibers and bio-based materials for packaging applications—a review of recent developments. BioResources 7:2506–2552
25. Kačík F, Kačíková D, Jablonský M, Katuščák S (2009) Cellulose degradation in newsprint paper ageing. Polym Degrad Stab 94:1509–1514. doi:10.1016/j.polymdegradstab.2009.04.033
26. Kasaai MR (2002) Comparison of various solvents for determination of intrinsic viscosity and viscometric constants for cellulose. J Appl Polym Sci 86:2189–2193. doi:10.1002/app.11164
27. Kim H-S, Kim S, Kim H-J, Yang H-S (2006) Thermal properties of bio-flour-filled polyolefin composites with different compatibilizing agent type and content. Thermochim Acta 451:181–188. doi:10.1016/j.tca.2006.09.013
28. Kjellgren H, Gällstedt M, Engström G, Järnström L (2006) Barrier and surface properties of chitosan-coated greaseproof paper. Carbohydr Polym 65:453–460. doi:10.1016/j.carbpol.2006.02.005
29. Koch G (2008) Raw Material for Pulp. In: Sixta H (ed) Hand book of pulp, Volume 1. WILEY-VCH, Weinheim, pp 21-68. DOI: 10.1002/9783527619887.ch2
30. Laine J, Stenius P, Carlsson G, Ström G (1996) The effect of ECF and TCF bleaching on the surface chemical composition of kraft pulp as determined by ESCA. Nord Pulp Pap Res J 11:201–210
31. Logenius L, Friman L, Agnemo R (2008) The influence of temperature and moisture on the optical properties of cellulose in the presence of metal chlorides and glucuronic acid. Nord Pulp Pap Res J 23:72–80
32. Łojewska J, Miśkowiec P, Łojewski T, Proniewicz LM (2005) Cellulose oxidative and hydrolytic degradation: in situ FTIR approach. Polym Degrad Stab 88:512–520
33. Łojewski T, Ziȩba K, Knapik A, Bagniuk J, Lubańska A, Łojewska J (2010) Evaluating paper degradation progress. Cross-linking between chromatographic, spectroscopic and chemical results. Appl Phys A 100:809–821. doi:10.1007/s00339-010-5657-5
34. Mancera C, El Mansouri N-E, Vilaseca F, Ferrando F, Salvado J (2011) The effect of lignin as a natural adhesive on the physico-mechanical properties of vitis vinifera fiberboards. BioResources 6:2851–2860
35. Matsuoka S, Kawamoto H, Saka S (2011) Reducing end-group of cellulose as a reactive site for thermal discoloration. Polym Degrad Stab 96:1242–1247. doi:10.1016/j.polymdegradstab.2011.04.009
36. Nuopponen M, Vuorinen T, Jämsä S, Viitaniemi P (2004) Thermal modifications in softwood studied by FT-IR and UV resonance Raman spectroscopies. J Wood Chem Technol 24:13–26. doi:10.1081/WCT-120035941
37. Peelman N, Ragaert P, De Meulenaer B, Adons D, Peeters R, Cardon L, Van Impe F, Devlieghere F (2013) Application of bioplastics for food packaging. Trends Food Sci Tech 32:128–141. doi:10.1016/j.tifs.2013.06.003
38. Rojo E, Peresin MS, Sampson WW, Hoeger IC, Vartiainen J, Laine J, Rojas OJ (2015) Comprehensive elucidation of the effect of residual lignin on the physical, barrier, mechanical and surface properties of nanocellulose films. Green Chem 53:345–355. doi:10.1039/c4gc02398f
39. Schmidt JA, Rye CS, Gurnagul N (1995) Lignin inhibits autoxidative degradation of cellulose. Polym Degrad Stab 49:291–297
40. Seth RS, Page DH (1996) The problem of using Page’s equation to determine loss in shear strength of fiber-fiber bonds upon pulp drying. Tappi J 79:206–210
41. Shao Z, Li K (2006) The effect of fiber surface lignin on interfiber bonding. J Wood Chem Technol 26:231–244. doi:10.1080/02773810601023438
42. Sivonen H, Nuopponen M, Maunu SL, Sundholm F, Vuorinen T (2003) Carbon-thirteen cross-polarization magic angle spinning nuclear magnetic resonance and Fourier transform infrared studies of thermally modified wood exposed to brown and soft rot fungi. Appl Spectrosc 57:266–273. doi:10.1366/000370203321558164
43. Sluiter A, Hames B, Ruiz R, Scarlata C, Sluiter J, Templeton D, Crocker D (2011) Determination of structural carbohydrates and lignin in biomass. National Renewable Energy Laboratory, Golden
44. Song YS, Begley T, Paquette K, Komolprasert V (2003) Effectiveness of polypropylene film as a barrier to migration from recycled paperboard packaging to fatty and high-moisture food. Food Addit Contam 20:875–883. doi:10.1080/02652030310001597592
45. Spence KL, Venditti RA, Habibi Y, Rojas OJ, Pawlak JJ (2010) The effect of chemical composition on microfibrillar cellulose films from wood pulps: mechanical processing and physical properties. Bioresour Technol 101:5961–5968. doi:10.1016/j.biortech.2010.02.104
46. Vainio AK, Paulapuro H (2007) Interfiber bonding and fiber segment activation in paper. BioResources 2:442–458
47. Vänskä E, Vuorinen T (2015) Effect of cellulase-assisted refining on the thermal degradation of bleached high-density paper. Holzforschung 69:703–712. doi:10.1515/hf-2014-0194
48. Vänskä E, Luukka M, Solala I, Vuorinen T (2014) Effect of water vapor in air on thermal degradation of paper at high temperature. Polym Degrad Stab 99:283–289. doi:10.1016/j.polymdegradstab.2013.10.020
49. Vishtal A, Retulainen E (2012) Deep-drawing of paper and paperboard: the role of material properties. BioResources 7:4424–4450
50. Wahlström T, Lundh A, Hansson T, Fellers C (2000) Biaxial straining of handsheets during drying - effect on delamination resistance. Nord Pulp Pap Res J 15:237–242
51. Zanoni B, Peri C, Bruno D (1995) Modelling of browning kinetics of bread crust during baking. Lebensm Wiss Technol 28:604–609. doi:10.1016/0023-6438(95)90008-X