The influence of temperature and moisture on the optical properties of cellulose in the presence of metal chlorides and glucuronic acid

Nordic Pulp and Paper Research Journal

Volumn 23, Issue 1, 2008, Pages 72-80

  Logenius, Louise ^a   Friman, Linda ^a   Agnemo, Roland ^a  

^a MID SWEDEN UNIVERSITY   (Sweden)

Author keywords

Calcium; Cellulose; Discoloration; Furfural; Glucuronic acid; HMF; Iron; Magnesium; Temperature

Indexed keywords

ALDEHYDES; ALKALINITY; CALCIUM; CELLULOSE; CHLORINE COMPOUNDS; DISCOLORATION; FURFURAL; GLUCOSE; IRON; MAGNESIUM; METAL IONS; OPTICAL PROPERTIES; TEMPERATURE;

5 HYDROXYMETHYL FURFURALS; ABSORPTION CO-EFFICIENT; AGEING CONDITIONS; GC-MS ANALYSIS; GLUCURONIC ACIDS; HUMID CONDITIONS; INDUCED DISCOLORATION; METAL CHLORIDES;

METALS;

CALCIUM; CELLULOSE; CELLULOSE DERIVATIVES; DISCOLORATION; FURFURAL; GLUCOSE; GLUCURONIC ACID; MAGNESIUM; OPTICAL PROPERTIES;

EID: 50949125887     PISSN: 02832631     EISSN: None     Source Type: Journal    
DOI: 10.3183/npprj-2008-23-01-p072-080     Document Type: Article

References (42)

1. Bansa, H. (1998): Aqueous deacidification -with calcium or magnesium? Restaurator, 19(1), 1-40.
2. Bicchieri, M. and Papa, S. (1996): The degradation of cellulose with ferric and cupric ions in a low-acid medium, Restaurator, 17(3), 165-183.
3. Bouchard, J., Nugent, H.M. and Berry, R.M. (1995): A comparison between acid treatment and chelation prior to hydrogen peroxide bleaching of kraft pulp, J. Pulp Paper Sci. 21(6), J203-208.
4. Calvini, P. and Gorassini, A. (2002): The degrading action of iron and copper on paper. A FTIR-deconvolution analysis, Restaurator, 23(4), 205-221.
5. Chirat, C. and de la Chapelle, V. (1999): Heat- and light-induced brightness reversion of bleached chemical pulps, J. Pulp Paper Sci. 25(6), 201-205.
6. Colodette, J.L., Rothenberg, S. and Dence, C.W. (1989): Factors affecting hydrogen peroxide stability in the brightening of mechanical and chemimechanical pulps. Part III: Hydrogen peroxide stability in the presence of magnesium or combinations of stabilizers, J. Pulp Paper Sci. 15(2), J45-50.
7. Czeipel, T.P. (1960): The influence of selected metal traces on the color and color stability of purified cotton linters, Tappi, 43(4), 289-299.
8. Emsley, A.M. and Stevens, G.C. (1994): Kinetics and mechanisms of the low-temperature degradation of cellulose, Cellulose, 1(1), 26-56.
9. Fagerson, I.S. (1969): Thermal degradation of carbohydrates: a review, J. Agr. Food Chem. 17(4), 747-750.
10. Fengel, D. and Wegener, X. (1989): Wood Chemistry, Ultrastructure, Reactions, Walter de Gruyter, New York, NY, USA, pp 269-295.
11. Forsskåhl, I., Tylli, H. and Olkkonen, C. (2000): Participation of carbohydrate-derived chromophores in the yellowing of high-yield and TCF pulps, J. Pulp Paper Sci. 26(7), 245-249.
12. Friman, L., Logenius, L., Agnemo, R. and Högberg, H.-E. (2003): Comparison of metal profiles in thermomechanical pulping processes in which either hydrogen peroxide or dithionite bleaching is used, Paperi Puu, 85(6), 334-339.
13. Garves, K. (1981): Dehydration and oxidation of cellulose hydrolysis products in acidic solution, J. Wood Chem. Technol. 1(2), 223-235.
14. Granström, , A., Eriksson, T., Gellerstedt, G., Rööst, C. and Larsson, P. (2001): Variables affecting the thermal yellowing of TCF-bleached birch kraft pulps, Nord. Pulp Paper Res. J. 16(1), 18-23.
15. 2-based peroxide bleaching process, Tappi J. 3(12), 27-31.
16. Hon D.N.-S. and Shiraishi N. (2001): Wood and Cellulosic Chemistry, Marcel Dekker Inc, New York, NY, USA, pp 443-445, 450-456, 470-478, 493-497, 882-886, 889.
17. Kolar, J. (1997): Mechanism of autoxidative degradation of cellulose, Restaurator, 18(4), 163-176.
18. Kolar, J. and Novak, G. (1996): Effect of various deacidification solutions on the stability of cellulose pulps, Restaurator, 17(1), 25-31.
19. Lapierre, L., Paleologou, M., Berry, R.M. and Bouchard, J. (1997): The limits of metal removal from kraft pulp by acid treatment, J. Pulp Paper Sci. 23(11), J539-542.
20. Li, J., Henriksson, G. and Gellerstedt, G. (2005): Carbohydrate reactions during high-temperature steam treatment of aspen wood, Appl. Biochem. Biotechnol. 125(3), 175-188.
21. Lienardy, A. and Van Damme, P. (1990): Practical deacidification, Restaurator, 11(1), 1-21.
22. Luetzow, A.E. and Theander, O. (1974): 6-Aldehydocelluloses - thermal instability, Beta-elimination and acid hydrolysis, Svensk Papperstidning, 77(9), 312-318.
23. Pauler, N. (2002): Paper Optics, AB Lorenzen and Wettre, Kista, Sweden, pp 23-41.
24. Popoff, T. and Theander, O. (1972): Formation of aromatic compounds from carbohydrates. Part 1. Reaction of D-glucuronic acid, D-galacturonic acid, D-xylose, and L-arabinose in slightly acidic, aqueous solution, Carbohydr. Res. 22(1), 135-149.
25. Popoff, T. and Theander, O. (1976): Formation of aromatic compounds from carbohydrates. Part III. Reaction of D-glucose and D-fructose in slightly acidic, aqueous solution, Acta Chem. Scand. B 30, 397-402.
26. Rapson, W.H. and Corbi, J.-C. (1964): Colour reversion caused by degradation products of oxidized cellulose, Pulp Paper Mag. Can. 65, T459-T466.
27. Sarybaeva, R.I., Sultankulova, A.S., Vasilikova, T.V. and Afanasiev, V.A. (1991): Degradation of cellulose in the presence of Lewis acids, Cellulose Chem. Technol. 25(3-4), 199-210.
28. Scheirs, J., Camino, G. and Tumiatti, W. (2001): Overview of water evolution during the thermal degradation of cellulose, Eur. Polym. J. 37(5), 933-942.
29. Schmidt, J.A. and Heitner, C. (1993): Use of UV-visible diffuse reflectance spectroscopy for chromophore research on wood fibers: a review, Tappi J. 76(2), 117-123.
30. Selih, V.S., Strlic, M., Kolar, J. and Philar, B. (2007): The role of transition metals in oxidative degradation of cellulose, Polym. Degrad. Stab. 92(8), 1476-1481.
31. Sevastyanova, O., Li, J. and Gellerstedt, G. (2006): On the reaction mechanism of the thermal yellowing of bleached chemical pulps, Nord. Pulp Paper Res. J. 21(2), 188-192.
32. Shafizadeh, F. and Bradbury, A.G.W. (1979): Thermal degradation of cellulose in air and nitrogen at low temperatures. J. Appl. Polym. Sci. 23(5), 1431-1442.
33. Simã, J.P.F, Egas, A.P.V., Baptista, C.M.S.G., Graca Carvalho, M. and Castro, J.A.A.M. (2005): Evolution of methylglucuronic and hexenuronic acid contents of Eucalyptus globulus pulp during kraft delignification, Ind. Eng. Chem. Res. 44(9), 2990-2996.
34. Singh, B., Dean, G.R. and Cantor, S.M. (1948): The role of 5-(hydroxymethyl)-furfural in the discoloration of sugar solutions, J. Am. Chem. Soc. 70(2), 517-522.
35. Stenius, P. (2000): Forest Products Chemistry, Fapet Oy, Helsinki, Finland, p. 54.
36. Strlic, M., Kolar, J., Philar, B., Rychly J. and Matisová- Rychlá, L. (2000): Chemiluminescence during thermal and thermo-oxidative degradation of cellulose, Eur. Polym. J. 36(11), 2351-2358.
37. Strlic, M., Kolar, J., Philar, B., Rychly J. and Matisová- Rychlá, L. (2001): Initial degradation processes of cellulose at elevated temperatures revisited: chemiluminescence evidence, Polym. Degrad. Stab. 72(1), 157-162.
38. Tajmir-Riahi, H.A. (1988): Interaction of D-glucose with alkaline earth metal ions. Synthesis, spectroscopic, and structural characterization of Mg(II)- and Ca(II)-D-glucose adducts and the effect of metal-ion binding on anomeric configuration of the sugar, Carbohydr. Res. 183(1), 35-46.
39. Taylor, K.A. and Buchanan-Smith, J.G. (1992): A colorimetric method for the quantification of uronic acids, and a specific assay for galacturonic acid. Anal. Biochem. 201(1), 190-196.
40. Williams, J.C., Fowler, C.S., Lyon, M.S., and Merrill, T.L. (1977): Metallic catalysts in the oxidative degradation of paper, In: Williams, J.C. (ed.), Preservation of Paper and Textiles of Historic and Artistic Value, Advances in Chemistry Series, No. 164, American Chemical Society, Washington, DC, USA, pp. 37-61.
41. Withmore, P.M. and Bogaard, J. (1994): Determination of the cellulose scission route in the hydrolytic and oxidative degradation of paper, Restaurato,r 47(1), 26-45.
42. Yu, L., Rae, M. and Ni, Y. (2004): Formation of oxalate from the Mg(OH)2-based peroxide bleaching of mechanical pulps, J. Wood Chem. Technol. 24(4), 341-355.