Development of ecofriendly bionanocomposite: Whey protein isolate/pullulan films with nano-SiO2

International Journal of Biological Macromolecules

Volumn 86, Issue , 2016, Pages 139-144

  Hassannia Kolaee, Mahbobeh ^a   Khodaiyan, Faramarz ^b   Pourahmad, Rezvan ^a   Shahabi Ghahfarrokhi, Iman ^c  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

^b UNIVERSITY OF TEHRAN   (Iran)

^c UNIVERSITY OF ZANJAN   (Iran)

Author keywords

Nano SiO2; Pullulan; Whey protein isolate

Indexed keywords

NANOCOMPOSITE; POLYMER; PULLULAN; SILICA NANOPARTICLE; GLUCAN; SILICON DIOXIDE; WATER; WHEY PROTEIN;

ARTICLE; DIFFERENTIAL SCANNING CALORIMETRY; MOISTURE; PROTEIN ISOLATION; SCANNING ELECTRON MICROSCOPY; SOLUBILITY; TENSILE STRENGTH; THERMAL ANALYSIS; WATER ABSORPTION; WATER VAPOR; X RAY DIFFRACTION; CHEMISTRY; COLOR; GREEN CHEMISTRY; MECHANICS; NANOTECHNOLOGY; PERMEABILITY; PROCEDURES; VOLATILIZATION;

COLOR; GLUCANS; GREEN CHEMISTRY TECHNOLOGY; MECHANICAL PHENOMENA; NANOCOMPOSITES; NANOTECHNOLOGY; PERMEABILITY; SILICON DIOXIDE; SOLUBILITY; VOLATILIZATION; WATER; WHEY PROTEINS;

EID: 84955452601     PISSN: 01418130     EISSN: 18790003     Source Type: Journal    
DOI: 10.1016/j.ijbiomac.2016.01.032     Document Type: Article

References (36)

1. Shahabi-Ghahfarrokhi I., Khodaiyan F., Mousavi M., Yousefi H. Preparation of UV-protective kefiran/NanoZnO nanocomposite: physical and mechanical properties. Int. J. Biol. Macromol. 2015, 72:41-46.
2. Rhim J.W., Lee S.B., Hong S.I. Preparation and characterization of agar/clay nanocomposite films: the effect of clay type. J. Food Sci. 2011, 76(3):40-48.
3. 2 nanocomposite films. Int. J. Biol. Macromol. 2014, 65:340-345.
4. Özge Erdohan Z., Nazan Turhan K. Barrier and mechanical properties of methylcellulose-whey protein films. Packag. Technol. Sci. 2005, 18(6):295-302.
5. Piermaria J., Bosch A., Pinotti A., Yantorno O., Garcia M.A., Abraham A.G. Kefiran films plasticized with sugars and polyols: water vapor barrier and mechanical properties in relation to their microstructure analyzed by ATR/FT-IR spectroscopy. Food Hydrocolloid 2011, 25:1261-1269.
6. Hernandez-Izquierdo V.M., Krochta J.M. Thermal transitions and heat-sealing of glycerol-plasticized whey protein films. Packag. Technol. Sci. 2009, 22(5):255-260.
7. Shahabi-Ghahfarrokhi I., Khodaiyan F., Mousavi M., Yousefi H. Effect of γ-irradiation on the physical and mechanical properties of kefiran biopolymer film. Int. J. Biol. Macromol. 2015, 74:343-350.
8. Jimenez-Castano L., Lopez-Fandino R., Olana A., Villamiel M. Study on β-lacoglobulin glycosylation with dextran: effect on solubility and heat stability. Food Chem. 2005, 93:689-695.
9. Fairley P., Monahan F.J., German J.B., Krochta J.M. Mechanical properties and water vapor permeability of edible films from whey protein isolate and sodium dodecyl sulfate. J. Agric. Food Chem. 1996, 44:438-443.
10. McHugh T.H., Krochta J.M. Sorbitol- vs glycerol plasticized whey protein edible films: integrated oxygen permeability and tensile property evaluation. J. Agric. Food Chem. 1994, 42:841-845.
11. Shahidul Islam M.D., Yeum J.H., Das A.K. Effect of pullulan/poly(vinyl alcohol) blend system on the montmorillonite structure with property characterization of electrospun pullulan/poly(vinylalcohol)/montmorillonite nanofibers. J. Colloid Interface Sci. 2012, 368:273-281.
12. Singh R.S., Saini G.K., Kennedy J.F. Pullulan: microbial sources, production and applications. Carbohydr. Polym. 2008, 73(4):515-531.
13. Deshpande M.S., Rale V.B., Lynch J.M. Aureobasidium pullulan in applied microbiology: a status report. Enzyme Microb. Technol. 1992, 14:514-527.
14. Sothorinvit R., Rhim J., Hong S. Effect of nano-clay type on the physical and antimicrobial properties of whey protein isolate/clay composite films. Food Eng. 2009, 91:468-473.
15. Gounga M.E., Xu S., Wang Z. Whey protein isolate-based edible films as affected by protein concentration, glycerol ratio and pullulan addition in film formation. J. Food Eng. 2007, 83:521-530.
16. Hassannia-Kolaee M., Khodaiyan F., Shahabi-Ghahfarrokhi I. Modification of functional properties of pullulan-whey protein bionanocomposite films with nanoclay. J. Food Sci. Technol. 2015, (in press).
17. Uyama H., Kuwabara M., Tsujimoto T., Nakano M., Usuki A., Kobayashi S. Green nanocomposite from renewable resources: plant oil-clay hybrid materials. Chem. Mater. 2003, 15:2492-2494.
18. Xiong H.G., Tang S.W., Tang H.W., Zou L.P. The structure and properties of a starch-based biodegradable film. Carbohydr. Polym. 2008, 71:263-268.
19. 2 nanocomposite synthesized via the in situ polymerization with metallocene catalyst. Chem. Eng. Sci. 2007, 62:899-905.
20. 2 hybrid films. Carbohydr. Polym. 2011, 86:1784-1789.
21. Buzea C., Pacheco I.I., Robbie K. Nanomaterials and nanoparticles: sources and toxicity. Biointerphases 2007, 2(4):MR17-MR71.
22. ASTM Standard test method for tensile properties of thin plastic sheeting. Standard D882. Annual Book of ASTM 2001, American Society for Testing and Materials, Philadelphia, PA.
23. Almasi H., Ghanbarzadeh B., Entezami A.A. Physicochemical properties of starch-CMC-nanoclay biodegradable films. Int. J. Biol. Macromol. 2010, 46:1-5.
24. ASTM Standard test methods for water vapor transmission of material. standard E96-95. Annual book of ASTM 1995, American Society for Testing and Materials, Philadelphia, PA.
25. Rhim J., Hong S., Park H., Ng P. Preparation and characterization ofchitosan-based nanocomposite films with antimicrobial activity. J. Agric. Food Chem. 2006, 54:5814-5822.
26. Ahmadi R., Kalbasi-Ashtari A., Oromiehie A., Yarmand M.S., Jahandideh F. Development and characterization of a novel biodegradable edible film obtained from psyllium seed (Plantago ovata Forsk). J. Food Eng. 2012, 109:745-751.
27. ASTM Standard test method for transition temperatures and enthalpies of fusion and crystallization of polymers by differential scanning calorimetry D3418-03. Annual book of ASTM 2004, American Society for Testing and Materials, Philadelphia, PA.
28. 2 on the performance of poly(MMA/BA/MAA)/EP. J. Mater. Lett. 2007, 61:725-729.
29. 2/whey protein isolate nanocomposite film. Food Hydrocolloids 2011, 25:1098-1104.
30. Kristo E., Biliaderis C.G. Physical properties of starch nanocrystal reinforced pullulan films. Carbohydr. Polym. 2007, 68:146-158.
31. Ma X., Chang P.R., Yang J., Yu J. Preparation and properties of glycerol plasticized-pea. Carbohydr. Polym. 2009, 75:472-478.
32. Chen H., Wang F., Zhang C., Shi Y., Jin G., Yuan S. Preparation of nanosilica materials: the concept from wheat straw. J. Non-Cryst. Solid 2010, 365(50):2781-2785.
33. Jongsomjit B., Chaichana E., Praserthdam P. LLDPE/nano-silica composites posites synthesized via in situ polymerization of ethylene/1-hexene with MAO/metallocene catalyst. J. Mater. Sci. 2005, 40(8):2043-2045.
34. Hu H., Xin J.H., Hu H., Chan A., He L. Glutaraldehyde-chitosan and poly(vinyl alcohol) blends, and fluorescence of their nano-silica composite films. Carbohydr. Polym. 2013, 91:305-313.
35. Tang X., Alavi S., Herald T. Effects of plasticizers on the structure and properties of starch-clay nanocomposite films. Carbohydr. Polym. 2008, 74:552-558.
36. Katritzky A.R., Jain R., Lomaka A., Petrukhin R., Maran U., Karelson M. Perspective on the Relationship between melting points and chemical structure. Cryst. Growth Des. 2001, 1(4):261-265.