Characterization of pea protein-based bioplastics processed by injection moulding

Food and Bioproducts Processing

Volumn 97, Issue , 2016, Pages 100-108

  Perez, Victor ^a   Felix, Manuel ^a   Romero, Alberto ^a   Guerrero, Antonio ^a  

^a UNIVERSITY OF SEVILLE   (Spain)

Author keywords

Bioplastic; Dynamic mechanical thermal analysis; Mixing; Pea protein; Tensile strength test; Water absorption

Indexed keywords

DIFFERENTIAL SCANNING CALORIMETRY; DYNAMIC MECHANICAL ANALYSIS; MIXING; MOLDING; PROTEINS; REINFORCED PLASTICS; TENSILE STRENGTH; THERMOANALYSIS; WATER ABSORPTION;

BIOPLASTICS; DYNAMIC MECHANICAL THERMAL ANALYSIS; INJECTION MOULDING MACHINE; MECHANICAL ENERGIES; PEA PROTEIN ISOLATES; PEA PROTEINS; PLASTIC MATERIALS; SUITABLE CONDITIONS;

INJECTION MOLDING;

EID: 84953256045     PISSN: 09603085     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fbp.2015.12.004     Document Type: Article

References (49)

1. ASTM Standard test method for plastics Annual Book of ASTM Standards 2005 American Society for Testing and Materials Philadelphia, PA.
2. M. Beltrán-Rico, and A. Marcilla-Gomis Tecnología de Polímeros 2012 Publicaciones Universidad de Alicante Alicante ISBN: 978-84-9717-232-5
3. T. Beveridge, S.J. Toma, and S. Nakai Determination of SH- and SS-groups in some food proteins using Ellman's reagent J. Food Sci. 39 1974 49 51
4. M.M. Bradford A rapid and sensitive method for the quantification of microgram quantities of protein utilizing the principle of protein-dye binding Anal. Biochem. 72 1976 248 254
5. Y. Byun, and Y. Teck Kim Innovations in Food Packaging 2nd ed. 2012 Elsevier London, UK 369 390 ISBN: 978-0-12-394601-0
6. R.P. Chartoff Thermal Characterization of Polymeric Materials 2nd ed. 1997 Academic Press New York 484 744
7. D. Chao, R. He, S. Jung, and R.E. Aluko Effect of pressure or temperature pretreatment of isolated pea protein on properties of the enzymatic hydrolysates Food Res. Int. 54 2013 1528 1534
8. W.S. Choi, and J.H. Han Film-forming mechanism and heat denaturation effects on the physical and chemical properties of pea-protein-isolate edible films J. Food Sci. 67 2002 1399 1406
9. L.A. De Graaf, and P. Kolster Industrial proteins as a green alternative for 'petro' polymers: potentials and limitations Macromol. Symp. 127 1998 51 58
10. L. di Gioia, and S. Guilbert Corn protein-based thermoplastic resins: effect of some polar and amphiphilic plasticizers J. Agric. Food Chem. 47 3 1999 1254 1261
11. Directive, 2001/18/EC of the European Parliament and of the Council of 12 March 2001 on the deliberate release into the environment of genetically modified organisms and repealing Council Directive 90/220/EEC. Official Journal L 106, 17/04/2001 P. 0001 - 0039. Available from: http://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX:32001L0018&from=ES, Accessed 12.09.10.
12. R.D. Etheridge, G.M. Pesti, and E.H. Foster A comparison of nitrogen values obtained utilizing the Kjeldahl nitrogen and Dumas combustion methodologies (Leco CNS 2000) on samples typical of an animal nutrition analytical laboratory Anim. Feed Sci. Technol. 73 1998 21 28
13. R.E. Feeney, and J.R. Whitaker Importance of cross-linking reactions in proteins Adv. Cereal Sci.Technol. 9 1988 21 43
14. M. Felix, J.E. Martín-Alfonso, A. Romero, and A. Guerrero Development of albumen/soy biobased plastic materials processed by injection molding J. Food Eng. 125 2014 7 16
15. M. Felix, A. Romero, F. Cordobés, and A. Guerrero Development of crayfish bio-based plastic materials processed by small-scale injection moulding J. Sci. Food Agric. 95 2015 679 687
16. L. Fernández-Espada, C. Bengoechea, F. Cordobés, and A. Guerrero Linear viscoelasticity characterization of egg albumen/glicerol blends with applications in material moulding processes Food Bioprod. Process. 91 2013 319 326
17. A. Gennadios Protein Based Films and Coatings 2002 CRC New York 66 115
18. J. González-Gutiérrez, P. Partal, M. García-Morales, and C. Gallegos Effect of processing on the viscoelastic, tensile and optical properties of albumen/starch-based bioplastics Carbohydr. Polym. 84 2011 308 315
19. P. Guerrero, Z.A. Nur Hanani, J.P. Kerry, and K. de la Caba Characterization of soy protein-based films prepared with acids and oils by compression J. Food Eng. 107 2011 41 49
20. P. Guerrero, P.M. Stefani, R.A. Ruseckaite, and K. de la Caba Functional properties of film based on soy protein isolate and gelatin processed by compression molding J. Food Eng. 105 2011 65 72
21. V. Hernandez-Izquierdo, and J. Krochta Thermoplastic processing of proteins for film formation - a review J. Food Sci. 73 2 2008 R30 R39
22. A. Jerez, P. Partal, I. Martinez, C. Gallegos, and A. Guerrero Protein-based bioplastics: effect of thermo-mechanical processing Rheol. Acta 46 2007 711 720
23. S. Kokoszka, F. Debeaufort, A. Hambleton, A. Lenart, and A. Voilley Protein and glycerol contents affect physico-chemical properties of soy protein isolate-based edible films J. Food Eng. 11 2010 503 510
24. D. Kowalczyk, and B. Baraniak Effect of plasticizers, pH and heating of film-forming solution on the properties of pea protein isolate films J. Food Eng. 105 2011 295 305
25. B. Lagrain, B. Goderis, K. Brijs, and J.A. Delcour Molecular basis of processing wheat gluten toward biobased materials Biomacromolecules 11 2010 533 541
26. H-N. Liang, and C-H. Tang pH-dependent emulsifying properties of pea [Pisum sativum (L)] proteins Food Hydrocoll. 33 2013 309 319
27. W. Liu, M. Misra, P. Askeland, L.T. Drzal, and A.K. Mohanty 'Green' composites from soy based plastic and pineapple leaf fiber: fabrication and properties evaluation Polymer 46 2005 2710 2721
28. M.A.K. Markwell, S.M. Haas, L.L. Bieber, and N.E. Tolbert Modification of Lowry procedure to simplify protein determination in membrane and lipoprotein samples Anal. Biochem. 87 1978 206 210
29. J.E. Martín-Alfonso, M. Félix, A. Romero, and A. Guerrero Development of new albumen based biocomposites formulations by injection moulding using chitosan as physicochemical modifier additive Compos. Part B Eng. 61 2014 275 281
30. Y. Matveev, V. Grinberg, and V. Tolstoguzov The plasticizing effect of water on proteins, polysaccharides and their mixtures. Glassy state of biopolymers, food and seeds Food Hydrocoll. 14 2000 425 437
31. G. Menges Werkstoffkunde Kunststoffe 5 Aufl 2002 Haner Verlag Müchen ISBN: 3-446-21257-4
32. Z.H. Mohammed, S.E. Hill, and J.R. Mitchell Covalent crosslinking in heated protein systems J. Food Sci. 65 2000 221 226
33. R. Osen, S. Toelstede, F. Wild, P. Eisner, and U. Schweiggert-Weisz High moisture extrusion cooking of pea protein isolates: raw material - characteristics, extruder responses, and texture properties J. Food Eng. 127 2014 67 74
34. A.M. Pearson B.J.F. Hudson, Developments in Food Proteins 2nd ed. 1983 Applied Science Publishers Ltd. Essex, England 67 108 (Soy proteins)
35. Plastics-Europe. 2008. The Compelling Facts about Plastics. An Analysis of Plastics Production, Demand and Recovery for 2006 in Europe: EUPC (the European Plastics Converters), EPRO (European Association of Plastics Recycling and Recovery Organisations), & EuPr (the European Plastics Recyclres).
36. M. Pommet, A. Redl, M.H. Morel, and S. Guilbert Study of wheat gluten plasticisation with fatty acids Polymer 44 2003 115 122
37. M. Pouplin, A. Redl, and N. Gontard Glass transition of wheat gluten plasticized with water, glycerol, or sorbitol J. Agric. Food Chem. 47 1999 538 543
38. N. Reddy, and Y. Yang Thermoplastic films from plant proteins J. Appl. Polymer Sci. 130 2 2013 729 738
39. P.D. Ribotta, A. Colombo, and C.M. Rosell Enzymatic modifications of pea protein and its application in protein cassava and corn starch gels Food Hydrocoll. 27 2012 185 190
40. P.J. Shand, H. Ya, Z. Pietrasik, and P.K.J.P.D. Wanasundara Physicochemical and textual properties of heat-induced pea protein isolate gels Food Chem. 102 2007 1119 1130
41. L. Shen, J. Haufe, and M. Patel Product Overview and Market Projection of Emerging Bio-Based Plastics 2009 Utrecht University Utrecht - The Netherlands 227 (PRO-BIP 2009 final report)
42. V. Siracusa, P. Rocculi, S. Romani, and M. Dalla Rosa Biodegradable polymers for food packaging: a review Trends Food Sci. Technol. 19 2008 634 643
43. A.R. Taherian, M. Mondor, J. Labranche, H. Drolet, D. Ippersiel, and F. Lamarche Comparative study of functional properties of commercial and membrane processed yellow pea protein isolates Food Res. Int. 44 2011 2505 2514
44. W.F. Tan, L.K. Koopal, L.P. Weng, W.H. van Riemsdijk, and W. Norde Humic acid protein complexation Geochim. Cosmochim. Acta 72 2008 2090 2099
45. T.W. Thannauser, Y. Konishi, and H.A. Scheraga Sensitive quantitative analysis of disulfide bonds in polypeptides and proteins Anal. Biochem. 138 1984 181 188
46. P. Tummala, W. Liu, L.T. Drzal, A.K. Mohanty, and M. Misra Influence of plasticizers on thermal and mechanical properties and morphology of soy.based bioplastics Ind. Eng. Chem. 45 2006 7491 7496
47. L.S. Zárate-Ramírez, I. Martínez, A. Romero, P. Partal, and A. Guerrero Wheat gluten-based materials plasticised with glycerol and water by thermoplastic mixing and thermomoulding J. Sci. Food Agric. 91 2011 625 633
48. L.S. Zárate-Ramírez, A. Romero, I. Martínez, C. Bengoechea, P. Partal, and A. Guerrero Effect of aldehydes on thermomechanical properties of gluten-based bioplastics Food Bioprod. Process. 92 2014 20 29
49. L.S. Zárate-Ramírez, A. Romero, C. Bengoechea, P. Partal, and A. Guerrero Thermo-mechanical and hydrophilic properties of polysaccharide/gluten-based bioplastics Carbohydr. Polym. 112 2014 24 31