An Australian Multi-Regional Waste Supply-Use Framework

Journal of Industrial Ecology

Volumn 20, Issue 6, 2016, Pages 1295-1305

  Fry, Jacob ^a   Lenzen, Manfred ^a   Giurco, Damien ^b   Pauliuk, Stefan ^c  

^a UNIVERSITY OF SYDNEY   (Australia)

^b UNIVERSITY OF TECHNOLOGY SYDNEY   (Australia)

^c UNIVERSITY OF FREIBURG   (Germany)

Author keywords

Australia; environmental accounting; input output analysis (IOA); regional; resource efficiency; waste footprint

Indexed keywords

EFFICIENCY; ENVIRONMENTAL IMPACT; SUPPLY CHAINS;

AUSTRALIA; ENVIRONMENTAL ACCOUNTINGS; INPUT OUTPUT ANALYSIS; REGIONAL; RESOURCE EFFICIENCIES;

WASTE TREATMENT;

ACCOUNTABILITY; CONCEPTUAL FRAMEWORK; DOMESTIC WASTE; ENVIRONMENTAL ECONOMICS; ENVIRONMENTAL IMPACT ASSESSMENT; INDUSTRIAL ECOLOGY; INPUT-OUTPUT ANALYSIS; REGIONAL PLANNING; RESOURCE USE; SUPPLY CHAIN MANAGEMENT; WASTE MANAGEMENT; WASTE TREATMENT;

AUSTRALIA;

EID: 84950336176     PISSN: 10881980     EISSN: 15309290     Source Type: Journal    
DOI: 10.1111/jiec.12376     Document Type: Article

References (52)

1. ABS (Australian Bureau of Statistics). 2008. Australian and New Zealand Standard Industrial Classification (ANZSIC), 2006 (Revision 2.0). Australian Bureau of Statistics (ABS) Catalogue No. 1292.0. http://www.ausstats.abs.gov.au/ausstats/subscriber.nsf/0/A5E774A14620FB5ACA257BA3001385EA/File/12920_revision2.pdf
2. ABS. 2012. Australian national accounts: Input-output tables, 2008-09. Australian Bureau of Statistics (ABS) Catalogue No. 5209.0.55.001. http://www.abs.gov.au/AusStats/ABS@.nsf/MF/5209.0.55.001
3. ABS. 2013a. Australian demographic statistics. Australian Bureau of Statistics (ABS) Catalogue No. 3101.0. http://www.abs.gov.au/ausstats/abs@.nsf/mf/3101.0
4. ABS. 2013b. Australian national accounts: National income, expenditure and product. Australian Bureau of Statistics (ABS) Catalogue No. 5206.0. http://www.abs.gov.au/ausstats/abs@.nsf/mf/5206.0/
5. ABS. 2013c. Information paper: Towards the Australian environmental-economic accounts. Australian Bureau of Statistics (ABS) Catalogue No. 4655.0.55.002. http://www.abs.gov.au/ausstats/abs@.nsf/mf/4655.0.55.002
6. ABS. 2013d. Waste Account, Australia, Experimental Estimates. Australian Bureau of Statistics (ABS) Catalogue No. 4602.0.55.005. http://www.abs.gov.au/ausstats/abs@.nsf/mf/4602.0.55.005
7. ABS. 2014a. Australian National Accounts: State Accounts, 2013-14. Australian Bureau of Statistics (ABS) Catalogue No. 5220.0. http://www.abs.gov.au/AusStats/ABS@.nsf/MF/5220.0
8. ABS. 2014b. Waste Account, Australia. Australian Bureau of Statistics (ABS) Catalogue No. 4602.0.55.006. http://www.abs.gov.au/ausstats/abs@.nsf/lookup/4602.0.55.006Media%20Release12010-11
9. Allwood, J. M., M. F. Ashby, T. G. Gutowski, and E. Worrell. 2011. Material efficiency: A white paper. Resources, Conservation and Recycling 55(3): 362–381.
10. Ayres, R. U. and L. W. Ayres. 1997. Use of materials balances to estimate aggregate waste generation in the United States. In Measures of environmental performance and ecosystem condition, edited by P. Schultz. Washington, D.C.: National Academy Press.
11. Ayres, R. U. and A. V. Kneese. 1969. Production, consumption, and externalities. The American Economic Review 59(3): 282–297.
12. BE (Blue Environment and Randell Environmental Consulting). 2014. Waste generation and resource recovery in Australia, 2011-2012. Canberra, Australia: Department of Sustainability, Environment, Water, Population and Communities. www.environment.gov.au/system/files/resources/4b666638-1103-490e-bdef-480581a38d93/files/wgrra.pdf. Accessed September 2015.
13. Bouwmeester, M. C. and J. Oosterhaven. 2013. Specification and aggregation errors in environmentally extended input-output models. Environmental and Resource Economics 56(3): 307–335.
14. Converse, A. O. 1971. On the extension of input-output analysis to account for environmental externalities. American Economic Review 61(1): 197–98.
15. Encycle Pty. Ltd. 2013. A study into commercial and industrial (C&I) waste and recycling in Australia by industry division. Canberra, Australia: Department of Sustainability, Environment, Water, Population and Communities. www.environment.gov.au/system/files/resources/91b2180c-b805-44c5-adf7-adbf27a2847e/files/commercial-industrial-waste.pdf. Accessed September 2015.
16. Geschke, A, D. Moran, K. Kanemoto, and M. Lenzen. 2011. AISHA: a tool for constructing time series and large environmental and social accounting matrices using constrained optimisation. 19th International Input-Output Conference. Alexandria, USA. http://www.iioa.org/Conference/19th-downable%20paper.htm.
17. Hoekstra, R. and J. C. J. M. van den Bergh. 2006. Constructing physical input-output tables for environmental modeling and accounting: Framework and illustrations. Ecological Economics 59(3): 375–393.
18. Hoornweg, D. and P. Bhada-Tata. 2012. What a waste: A global review of solid waste management. Washington DC, USA: Urban Development & Local Government Unit, World Bank.
19. Hoornweg, D., P. Bhada-Tata, and C. Kennedy. 2015. Peak Waste: When is it likely to occur? Journal of Industrial Ecology 19(1): 117–128.
20. Hyder Consulting. 2012. Waste and recycling in Australia 2011: Incorporating a revised method for compiling waste and recycling data. Canberra, Australia: Department of Sustainability, Environment, Water, Population and Communities.
21. Kagawa, S., S. Nakamura, H. Inamura, and M. Yamada. 2007. Measuring spatial repercussion effects of regional waste management. Resources, Conservation and Recycling 51(1): 141–174.
22. Lenzen, M. 1998. Primary energy and greenhouse gases embodied in Australian final consumption: An input-output analysis. Energy Policy 26(6): 495–506.
23. Lenzen, M. 2007. Structural path analysis of ecosystem networks. Ecological Modelling 200(34): 334–342.
24. Lenzen, M. 2011. Aggregation versus disaggregation in input-output analysis of the environment. Economic Systems Research 23(1): 73–89.
25. Lenzen, M., B. Gallego, and R. Wood. 2009. Matrix balancing under conflicting information. Economic Systems Research 21(1): 23–44.
26. Lenzen, M., A. Geschke, T. Wiedmann, J. Lane, N. Anderson, T. Baynes, J. Boland, et al. 2014. Compiling and using input-output frameworks through collaborative virtual laboratories. Science of The Total Environment 485-486:241–251.
27. Lenzen, M., D. Moran, K. Kanemoto, B. Foran, L. Lobefaro, and A. Geschke. 2012. International trade drives biodiversity threats in developing nations. Nature 486(7401): 109–112.
28. Lenzen, M., D. Moran, K. Kanemoto, and A. Geschke. 2013. Building Eora: A global multi-region input-output database at high country and sector resolution. Economic Systems Research 25(1): 20–49.
29. Lenzen, M., J. Murray, F. Sack, and T. Wiedmann. 2007. Shared producer and consumer responsibility Theory and practice. Ecological Economics 61(1): 27–42.
30. Lenzen, M. and C. J. Reynolds. 2014. A supply-use approach to waste input-output analysis. Journal of Industrial Ecology 18(2):212–226.
31. Li, J., C. Lin, and S. Huang. 2013. Considering variations in waste composition during waste input-output modeling. Journal of Industrial Ecology 17(6): 892–899.
32. Nakamura, S. 1999. Input-output analysis of waste cycles. In Environmentally Conscious Design and Inverse Manufacturing, 1999. Proceedings. EcoDesign '99: First International Symposium on, pages 475–480. http://ieeexplore.ieee.org/xpl/login.jsp?tp=&arnumber=747659&url=http%3A%2F%2Fieeexplore.ieee.org%2Fxpls%2Fabs_all.jsp%3Farnumber%3D747659. Accessed October 2015.
33. Nakamura, S. 2000. Inter-industry analysis of the demand for landfill capacity. In Modern Landfill Technology and Management, Japan Society of Waste Management Experts, edited by M. Hanashima, pp. 178–185.
34. Nakamura, S. and Y. Kondo. 2002. Input-output analysis of waste management. Journal of Industrial Ecology 6(1): 39–63.
35. Nakamura, S. and Y. Kondo. 2006. A waste input-output life-cycle cost analysis of the recycling of end-of-life electrical home appliances. Ecological Economics 57(3): 494–506.
36. Nakamura, S. and K. Nakajima. 2005. Waste input-output material flow analysis of metals in the Japanese economy. Materials Transactions 46(12): 2550–2553.
37. Net Balance. 2009. National waste data system requirements study. Canberra, Australia: Department of Environment, Water, Heritage and the Arts.
38. Peters, G. P., S. J. Davis, and R. Andrew. 2012. A synthesis of carbon in international trade. Biogeosciences 9(8): 3247–3276.
39. Reynolds, C. J., J. Boland, K. Thompson, and D. Dawson. 2011. An introduction to the waste input-output model: A methodology to evaluate sustainable behaviour around (food) waste? In Creating sustainable communities in a changing world, edited by P. E. J. Roetman and C. B. Daniels. Adelaide, Australia: Crawford House Publishing.
40. Reynolds, C. J., J. Piantadosi, and J. Boland. 2014. A waste supply-use analysis of Australian waste flows. Journal of Economic Structures 3(1): 1–16.
41. Schandl, H. and G. M. Turner. 2009. The dematerialization potential of the Australian economy. Journal of Industrial Ecology 13(6): 863–880.
42. SRU (Sustainable Resource Use Pty Ltd). 2011. National plastics recycling survey. Melbourne, Australia: Plastics and Chemicals Industries Association (PACIA). http://pacia.org.au/DownFile.Aspx?fileid=1561. Accessed September 2015.
43. TEC (Total Environment Centre) and Warnken ISE. 2006. State of waste series: Western Australia. Sydney, Australia: Total Environment Centre. www.warnkenise.com.au/pdfs/Printed%20State%20of%20Waste%20in%20Western%20Australia.pdf. Accessed September 2015.
44. Tsukui, M., R. Hasegawa, S. Kagawa, and Y. Kondo. 2012. Construction of a Multi-region Waste Input-Output Table. In The 20th IIOA Conference in Bratislava. http://iioa.org/conferences/20th/papers/files/738_20120519061_IIOA_2012_paper_47WIO_mt2.pdf. Accessed September 2015.
45. Tsukui, M., R. Hasegawa, S. Kagawa, and Y. Kondo. 2014. Repercussion of effects of final consumption on production and environmental loads: Detailed multi-regional waste input-output approach in the 47 prefectures of Japan. In 22nd International Input-Output Assocation Conference in Lisbon, Portugal. www.iioa.org/conferences/22nd/papers/files/1563.pdf. Accessed September 2015.
46. 2 emissions embodied in imports to Europe. Environmental Science & Technology 47(4): 1775–1783.
47. UN (United Nations). 1999. Handbook of input-output table compilation and analysis, edited by United Nations. Studies in methods series F, no. 74-Handbook of national accounting. New York, NY, USA: United Nations.
48. UN, European Union, Food and Agriculture Organization, International Monetary Fund, Organisation for Economic Co-operation and Development, and The World Bank. 2014. The System of Environmental-Economic Accounting (SEEA) Central Framework. New York: United Nations Publications.
49. 2 emissions embodied in international trade using a global input-output model. Economic Systems Research 24(2): 113–139.
50. Wiedmann, T. O., H. Schandl, M. Lenzen, D. Moran, S. Suh, J. West, and K. Kanemoto. 2013. The material footprint of nations. Proceedings of the National Academy of Sciences 112(20): 6271–6276.
51. Wiedmann, T. O., S. Suh, K. Feng, M. Lenzen, A. Acquaye, K. Scott, and J. R. Barrett. 2011. Application of hybrid life cycle approaches to emerging energy technologies: The case of wind power in the UK. Environmental Science & Technology 45(13): 5900–5907.
52. Wood, R., M. Lenzen, and B. Foran. 2009. A material history of Australia. Journal of Industrial Ecology 13(6): 847–862.