Mechanical properties of regular porous biomaterials made from truncated cube repeating unit cells: Analytical solutions and computational models

Materials Science and Engineering C

Volumn 60, Issue , 2016, Pages 163-183

  Hedayati, R ^a,b   Sadighi, M ^a   Mohammadi Aghdam, M ^a   Zadpoor, A A ^b  

^a AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

^b DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

Analytical; Lattice structure; Mechanical behavior; Porous biomaterials

Indexed keywords

BIOMATERIALS; BUCKLING; CELLS; COMPUTER ARCHITECTURE; CYTOLOGY; ELASTIC MODULI; FINITE ELEMENT METHOD; GEOMETRY; MECHANICAL PROPERTIES; POISSON RATIO; POROSITY; STRUCTURAL PROPERTIES; STRUTS; TEXTILES; YIELD STRESS;

ANALYTICAL; COMPUTATIONAL MODEL; COMPUTATIONAL RESULTS; COMPUTATIONAL TECHNIQUE; LATTICE STRUCTURES; MECHANICAL BEHAVIOR; MICRO ARCHITECTURES; UNIT CELL APPROACH;

BIOMECHANICS;

BIOMATERIAL;

CHEMISTRY; COMPUTER SIMULATION; MATERIALS TESTING; POROSITY;

BIOCOMPATIBLE MATERIALS; COMPUTER SIMULATION; MATERIALS TESTING; POROSITY;

EID: 84947247815     PISSN: 09284931     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msec.2015.11.001     Document Type: Article

References (51)

1. P. Heinl, C. Körner, and R.F. Singer Selective electron beam melting of cellular titanium: mechanical properties Adv. Eng. Mater. 10 9 2008 882 888
2. J. Parthasarathy, B. Starly, S. Raman, and A. Christensen Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM) J. Mech. Behav. Biomed. Mater. 3 3 2010 249 259
3. L. Mullen, R.C. Stamp, W.K. Brooks, E. Jones, and C.J. Sutcliffe Selective Laser Melting: a regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications J. Biomed. Mater. Res. B Appl. Biomater. 89 2 2009 325 334
4. L. Murr, K. Amato, S. Li, Y. Tian, X. Cheng, S. Gaytan, E. Martinez, P. Shindo, F. Medina, and R. Wicker Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting J. Mech. Behav. Biomed. Mater. 4 7 2011 1396 1411
5. R. Hedayati, M. Sadighi, M. Mohammadi-Aghdam, and A.A. Zadpoor Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials 2015 (submitted for publication)
6. S. Van Bael, Y.C. Chai, S. Truscello, M. Moesen, G. Kerckhofs, H. Van Oosterwyck, J.-P. Kruth, and J. Schrooten The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds Acta Biomater. 8 7 2012 2824 2834
7. M. Rumpler, A. Woesz, J.W. Dunlop, J.T. van Dongen, and P. Fratzl The effect of geometry on three-dimensional tissue growth J. R. Soc. Interface 5 27 2008 1173 1180
8. C.M. Bidan, K.P. Kommareddy, M. Rumpler, P. Kollmannsberger, Y.J. Bréchet, P. Fratzl, and J.W. Dunlop How linear tension converts to curvature: geometric control of bone tissue growth PLoS One 7 5 2012 e36336
9. C.M. Bidan, K.P. Kommareddy, M. Rumpler, P. Kollmannsberger, P. Fratzl, and J.W. Dunlop Geometry as a factor for tissue growth: towards shape optimization of tissue engineering scaffolds Adv. Healthcare Mater. 2 1 2013 186 194
10. A.A. Zadpoor Bone tissue regeneration: the role of scaffold geometry Biomater. Sci. 3 2 2015 231 245
11. T.W. Bauer, and J. Schils The pathology of total joint arthroplasty Skelet. Radiol. 28 9 1999 483 497
12. M.G. Joshi, S.G. Advani, F. Miller, and M.H. Santare Analysis of a femoral hip prosthesis designed to reduce stress shielding J. Biomech. 33 12 2000 1655 1662
13. T. Karachalios, C. Tsatsaronis, G. Efraimis, P. Papadelis, G. Lyritis, and G. Diakoumopoulos The long-term clinical relevance of calcar atrophy caused by stress shielding in total hip arthroplasty: a 10-year, prospective, randomized study J. Arthroplast. 19 4 2004 469 475
14. S. Amin Yavari, J. van der Stok, Y.C. Chai, R. Wauthle, Z.T. Birgani, P. Habibovic, M. Mulier, J. Schrooten, H. Weinans, and A.A. Zadpoor Bone regeneration performance of surface-treated porous titanium Biomaterials 35 24 2014 6172 6181
15. S. Babaee, B.H. Jahromi, A. Ajdari, H. Nayeb-Hashemi, and A. Vaziri Mechanical properties of open-cell rhombic dodecahedron cellular structures Acta Mater. 60 6 2012 2873 2885
16. R. Bitsche, T. Daxner, and H.J. Böhm Space-filling Polyhedra as Mechanical Models for Solidified Dry Foams 2005 Technische Universität Wien
17. B. Buffel, F. Desplentere, K. Bracke, and I. Verpoest Modelling open cell-foams based on the Weaire-Phelan unit cell with a minimal surface energy approach Int. J. Solids Struct. 51 19 2014 3461 3470
18. O. Cansizoglu, O. Harrysson, D. Cormier, H. West, and T. Mahale Properties of Ti-6Al-4V non-stochastic lattice structures fabricated via electron beam melting Mater. Sci. Eng. A 492 1 2008 468 474
19. L.J. Gibson, and M.F. Ashby Cellular Solids: Structure and Properties 1997 Cambridge University Press
20. A.M. Kraynik, and D.A. Reinelt Linear elastic behavior of dry soap foams J. Colloid Interface Sci. 181 2 1996 511 520
21. G. Labeas, and M. Sunaric Investigation on the static response and failure process of metallic open lattice cellular structures Strain 46 2 2010 195 204
22. M.H. Luxner, A. Woesz, J. Stampfl, P. Fratzl, and H.E. Pettermann A finite element study on the effects of disorder in cellular structures Acta Biomater. 5 1 2009 381 390
23. T. Niendorf, F. Brenne, and M. Schaper Lattice structures manufactured by SLM: on the effect of geometrical dimensions on microstructure evolution during processing Metall. Mater. Trans. B 45 4 2014 1181 1185
24. E. Ptochos, and G. Labeas Shear modulus determination of cuboid metallic open-lattice cellular structures by analytical, Numerical and Homogenisation Methods Strain 48 5 2012 415 429
25. V. Shulmeister, M. Van der Burg, E. Van der Giessen, and R. Marissen A numerical study of large deformations of low-density elastomeric open-cell foams Mech. Mater. 30 2 1998 125 140
26. M. Smith, Z. Guan, and W. Cantwell Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique Int. J. Mech. Sci. 67 2013 28 41
27. J. Sun, Y. Yang, and D. Wang Mechanical properties of Ti-6Al-4V octahedral porous material unit formed by selective laser melting Adv. Mech. Eng. 2012 2012
28. W. Warren, and A. Kraynik Linear elastic behavior of a low-density Kelvin foam with open cells J. Appl. Mech. 64 4 1997 787 794
29. X. Zheng, H. Lee, T.H. Weisgraber, M. Shusteff, J. DeOtte, E.B. Duoss, J.D. Kuntz, M.M. Biener, Q. Ge, and J.A. Jackson Ultralight, ultrastiff mechanical metamaterials Science 344 6190 2014 1373 1377
30. R. Hedayati, M. Sadighi, M. Mohammadi-Aghdam, and A. Zadpoor Mechanical behavior of additively manufactured porous biomaterials made from truncated cuboctahedron unit cells 2015 (submitted for publication)
31. R. Hedayati, M. Sadighi, M. Mohammadi-Aghdam, and A.A. Zadpoor Effect of mass multiple counting on the elastic properties of open-cell regular porous biomaterials Mater. Des. 5 2015 9 20
32. C. Hou Numerical and Experimental Crashworthiness Studies of Foam-filled Frusta 2013
33. N. Mills, R. Stämpfli, F. Marone, and P. Brühwiler Finite element micromechanics model of impact compression of closed-cell polymer foams Int. J. Solids Struct. 46 3 2009 677 697
34. A. Vigliotti, and D. Pasini Stiffness and strength of tridimensional periodic lattices Comput. Methods Appl. Mech. Eng. 229 2012 27 43
35. M. Hasan An improved model for FE modeling and simulation of closed cell Al-alloy foams Adv. Mater. Sci. Eng. 2010 2010
36. A. Kim, K. Tunvir, G. Jeong, and S. Cheon A multi-cell FE-model for compressive behaviour analysis of heterogeneous Al-alloy foam Model. Simul. Mater. Sci. Eng. 14 6 2006 933
37. S. Ahmadi, G. Campoli, S. Amin Yavari, B. Sajadi, R. Wauthlé, J. Schrooten, H. Weinans, and A.A. Zadpoor Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells J. Mech. Behav. Biomed. Mater. 34 2014 106 115
38. S. Ahmadi, S. Yavari, R. Wauthle, B. Pouran, J. Schrooten, H. Weinans, and A. Zadpoor Additively manufactured open-cell porous biomaterials made from six different space-filling unit cells: the mechanical and morphological properties Materials 8 4 2015 1871 1896
39. S. Amin Yavari, R. Wauthlé, A.J. Böttger, J. Schrooten, H. Weinans, and A.A. Zadpoor Crystal structure and nanotopographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting Appl. Surf. Sci. 290 2014 287 294
40. S. Amin Yavari, S. Ahmadi, J. van der Stok, R. Wauthlé, A.A. Riemslag, M. Janssen, J. Schrooten, H. Weinans, and A.A. Zadpoor Effects of bio-functionalizing surface treatments on the mechanical behavior of open porous titanium biomaterials J. Mech. Behav. Biomed. Mater. 36 2014 109 119
41. R. Hedayati, M. Sadighi, and A. Zadpoor Analytical relationships for the mechanical properties of additively manufactured porous biomaterials based on octahedral unit cells 2015 Submitted
42. S. Senthilkumar Editorial: special issue on analytical and approximate solutions for numerical problems Walailak J. Sci. Technol. 11 8 2014 i ii
43. R. Hedayati, M. Sadighi, and M. Mohammadi-Aghdam Comparison of elastic properties of open-cell cellular solids with different unit cell types 2015 (submitted for publication)
44. R. Hedayati, M. Sadighi, M. Mohammadi-Aghdam, and A.A. Zadpoor Mechanics of additively manufactured porous biomaterials based on the rhombicuboctahedron unit cell J. Mech. Behav. Biomed. Mater. 53 2016 272 294
45. G. Campoli, M. Borleffs, S. Amin Yavari, R. Wauthle, H. Weinans, and A.A. Zadpoor Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing Mater. Des. 49 2013 957 965
46. Z. Marciniak, and K. Kuczyński Limit strains in the processes of stretch-forming sheet metal Int. J. Mech. Sci. 9 9 1967 609 620
47. A.A. Zadpoor, J. Sinke, and R. Benedictus Experimental and numerical study of machined aluminum tailor-made blanks J. Mater. Process. Technol. 200 1 2008 288 299
48. J.-Y. Rho, L. Kuhn-Spearing, and P. Zioupos Mechanical properties and the hierarchical structure of bone Med. Eng. Phys. 20 2 1998 92 102
49. P.K. Zysset, X.E. Guo, C.E. Hoffler, K.E. Moore, and S.A. Goldstein Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur J. Biomech. 32 10 1999 1005 1012
50. H.H. Bayraktar, E.F. Morgan, G.L. Niebur, G.E. Morris, E.K. Wong, and T.M. Keaveny Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue J. Biomech. 37 1 2004 27 35
51. M. Borleffs Finite Element Modeling to Predict Bulk Mechanical Properties of 3D Printed Metal Foams 2012 Delft University of Technology TU Delft