Stretchable interconnects using screen printed nanocomposites of MWCNTs with PDMS and P(VDF-TrFE)

2015 11th Conference on Ph.D. Research in Microelectronics and Electronics, PRIME 2015

Volumn , Issue , 2015, Pages 247-250

  Dang, Wenting ^a,b   Khan, Saleem ^a   Lorenzelli, Leandro ^a   Vinciguerra, Vincenzo ^c   Dahiya, Ravinder ^b  

^a FONDAZIONE BRUNO KESSLER   (Italy)

^b UNIVERSITY OF GLASGOW   (United Kingdom)

^c STMICROELECTRONICS   (Italy)

Author keywords

Conductive polymers; Manual screen printing; MWCNTs; PDMS; Stretchable interconnects

Indexed keywords

CARBON; COST EFFECTIVENESS; MICROCHANNELS; MICROELECTRONICS; NANOCOMPOSITES; POLYDIMETHYLSILOXANE; PULSE WIDTH MODULATION; SCREEN PRINTING; SERPENTINE; SILICATE MINERALS; SILICONES; YARN;

CONDUCTIVE POLYMER; ELECTRICAL CONDUCTIVITY; ELECTRICAL MEASUREMENT; ELECTRICAL RESISTANCES; MWCNTS; POLYDIMETHYLSILOXANE PDMS; POLYVINYLIDENE FLUORIDES; SCREEN PRINTING TECHNIQUE;

MULTIWALLED CARBON NANOTUBES (MWCN);

EID: 84946887351     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/PRIME.2015.7251381     Document Type: Conference Paper

References (27)

1. R. S. Dahiya, "Towards Flexible and Conformable Electronics," in 10th Conf. on Ph.D Rearch in Microelectronics and Electronics (PRIME) Grenoble, France, 2014, pp. 1-2.
2. R. S. Dahiya and S. Gennaro, "Bendable ultra-thin chips on flexible foils," IEEE Sens. J., vol. 13, no. 10, pp. 4030-4037, 2013.
3. R. S. Dahiya, A. Adami, C. Collini, and L. Lorenzelli, "Fabrication of Single Crystal Silicon Micro-/Nanostructures and Transferring them to Flexible Substrates," Microelectron. Eng., vol. 98, pp. 502-507, 2012.
4. S. Khan, R. Dahiya, and L. Lorenzelli, "Technologies for Printing Sensors and Electronics over Large Flexible Substrates: A Review," IEEE Sens. J., pp. 1-22, 2014.
5. E. O. Polat, O. Balc, and C. Kocabas, "Graphene based flexible electrochromic devices," Sci. Rep., vol. 4, pp. 6484, 2014.
6. H. Sirringhaus, "25th Anniversary Article: Organic Field-Effect Transistors: The path beyond amorphous silicon," Adv. Mater., vol. 26, no. 9, pp. 1319-1335, 2014.
7. D. Tobjörk and R. Österbacka, "Paper Electronics," Adv. Mater., vol. 23, no. 17, pp. 1935-1961, 2011.
8. S. Khan, S. Tinku, R. S. Dahiya and L. Lorenzelli, "Flexible Tactile Sensors using Screen Printed P(VDF-TrFE) and MWCNT/PDMS Composites," IEEE Sens. J., pp. 1-1, 2014.
9. K.-I. Jang, S. Y. Han, S. Xu, K. E. Mathewson, et al., "Rugged and breathable forms of stretchable electronics with adherent composite substrates for transcutaneous monitoring.," Nat. Commun., vol. 5, p. 4779, Jan. 2014.
10. T. Kim, S. Hyun Lee, Y. Li, Y. Shi, G. Shin, S. Dan Lee, Y. Huang, J. a. Rogers, and J. Su Yu, "Temperature-and size-dependent characteristics in ultrathin inorganic light-emitting diodes assembled by transfer printing," Appl. Phys. Lett., vol. 104, no. 5, p. 051901, Feb. 2014.
11. R. S. Dahiya, P. Mittendorfer, M. Valle, G. Cheng, and V. J. Lumelsky, "Directions toward effective utilization of tactile skin: A review," IEEE Sens. J., vol. 13, no. 11, pp. 4121-4138, 2013.
12. R. S. Dahiya, G. Metta, M. Valle, and G. Sandini, "Tactile sensing-from humans to humanoids," IEEE Trans. Robot., vol. 26, pp. 1-20, 2010.
13. K. Cherenack, C. Zysset, T. Kinkeldei, N. Münzenrieder, and G. Tröster, "Woven electronic fibers with sensing and display functions for smart textiles," Adv. Mater., vol. 22, pp. 5178-5182, 2010.
14. R. S. Dahiya, "Epidermal Electronics: Flexible Electronics for Biomedical Application," in Handbook of Bioelectronics-Directly inferfacing electronics and biological systems, S. Carrara and K. Iniewski, Eds., ed: Cambridge University Press, 2015, pp. 245-255.
15. R. S. Dahiya and M. Valle, Robotic Tactile Sensing-Technologies and System, Dordrecht: Springer, 2013.
16. M. Gonzalez, F. Axisa, M. Vanden Bulcke, D. Brosteaux, B. Vandevelde, and J. Vanfleteren, "Design of metal interconnects for stretchable electronic circuits," Microelectron. Reliab., vol. 48, no. 6, pp. 825-832, Jun. 2008.
17. S. Wagner and S. Bauer, "Materials for stretchable electronics," MRS Bull., vol. 37, no. 03, pp. 207-213, Mar. 2012.
18. S. P. Lacour, J. Jones, S. Wagner, T. Li, and Z. Suo, "Stretchable Interconnects for Elastic Electronic Surfaces," Proc. IEEE, vol. 93, no. 8. pp. 1459-1467, 2005.
19. J. Lu, M. Lu, A. Bermak, S. Member, and Y. Lee, "Study of Piezoresistance Effect of Carbon Nanotube-PDMS Composite Materials for Nanosensors," pp. 1240-1243, 2007.
20. P.-C. Ma, N. A. Siddiqui, G. Marom, and J.-K. Kim, "Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review," Compos. Part A Appl. Sci. Manuf., vol. 41, no. 10, pp. 1345-1367, Oct. 2010.
21. J.-B. Lee and D.-Y. Khang, "Electrical and mechanical characterization of stretchable multi-walled carbon nanotubes/polydimethylsiloxane elastomeric composite conductors," Compos. Sci. Technol., vol. 72, no. 11, pp. 1257-1263, Jun. 2012.
22. H. Jung, J. Moon, D. Baek, J. Lee, Y. Choi, and J. Hong, "CNT/PDMS Composite Flexible Dry Electrodes for Long-Term ECG Monitoring," IEEE Trans. Biomed. Eng., vol. 59, no. 5, pp. 1472-1479, 2012.
23. S. Tinku, C. Collini, L. Lorenzelli, and R. S. Dahiya, "Smart Contact Lens Using Passive Structures," in IEEE Sensors, 2014.
24. A. California, V. F. Cardoso, C. M. Costa, V. Sencadas, G. Botelho, J. L. Gómez-Ribelles, and S. Lanceros-Mendez, "Tailoring porous structure of ferroelectric poly(vinylidene fluoride-trifluoroethylene) by controlling solvent/polymer ratio and solvent evaporation rate," Eur. Polym. J., vol. 47, pp. 2442-2450, 2011.
25. N. Hu, Y. Karube, C. Yan, Z. Masuda, and H. Fukunaga, "Tunneling effect in a polymer/carbon nanotube nanocomposite strain sensor," Acta Mater., vol. 56, no. 13, pp. 2929-2936, 2008.
26. A. Khosla and B. L. Gray, "Preparation, Micro-Patterning and Electrical Characterization of Functionalized Carbon-Nanotube Polydimethylsiloxane Nanocomposite Polymer," Macromol. Symp., vol. 297, no. 1, pp. 210-218, 2010.
27. C. a. Martin, J. K. W. Sandler, A. H. Windle, M.-K. Schwarz, W. Bauhofer, K. Schulte, and M. S. P. Shaffer, "Electric field-induced aligned multi-wall carbon nanotube networks in epoxy composites," Polymer (Guildf)., vol. 46, no. 3, pp. 877-886, 2005.