Cyber-physical production systems: Roots from manufacturing science and technology

At-Automatisierungstechnik

Volumn 63, Issue 10, 2015, Pages 766-776

  Monostori, László ^a,b  

^a INSTITUTE OF EXPERIMENTAL MEDICINE   (Hungary)

^b BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS   (Hungary)

Author keywords

cyber physical systems; Industrie 4.0; Manufacturing systems

Indexed keywords

EID: 84946737999     PISSN: 01782312     EISSN: 2196677X     Source Type: Journal    
DOI: 10.1515/auto-2015-0066     Document Type: Review

References (77)

1. N.N. Cyber-Physical Systems: Driving force for innovation in mobility, health, energy and production. acatech Position Paper, December 2011: 48.
2. N.N. Integrierte Forschungsagenda Cyber-Physical Sytems. acatech Studie March 2012 297.
3. N.N. Strategic R & D opportunities for 21st century, Cyberphysical systems, Connecting computer and information systems with the physical world. Report of the Steering Committee for Foundations and Innovation for Cyber-Physical Systems, USA, January, 2013: 24.
4. Rajkumar R., Lee I., Sha L., Stankovic J. Cyber-physical systems: The next computing revolution. Proceedings of the Design Automation Conference 2011, June 13-18, 2010, Anheim, CA, US: 731-736.
5. Lee E.A., Seshia S.A. Introduction to embedded systems -A cyber-physical approach, LeeSeshia.org. 2014; Edition 1.5, http://LeeSeshia.org.
6. Kagermann H., Wahlster W., Helbig J. Secoring the future of German manufacturing industry: Recommendations for implementing the strategic initiative INDUSTRIE 4.0, Final report of the Industrie 4.0 Working Group, acatech, April 2013: 78.
7. Zuhlke D., Ollinger L. Agile automation systems based on cyber-physical systems and service-oriented architectures, Advances in Automation and Robotics, Lecture Notes in Electrical Engineering 2012; 122/1: 567-574.
8. Spath D., Ganschar O., Gerlach S., Hammerle M., Krause T., Schlund S. Produktionsarbeit der Zukunft -Industrie 4.0 2013, Fraunhofer Verlag: 150.
9. Schuh G., Potente T., Wesch-Potente C., Hauptvogel A. Sustainable increase of overhead productivity due to cyber-physicalsystems. Proceedings of the 11th Global Conference on Sustainable Manufacturing, September 23-25, 2013, Berlin, Germany: 332-335.
10. Schmitt R., Groe Bockmann M. Kollaborative cyber-physische Produktionssysteme: Ausbruch aus der Produktivitatsfalle. in: Integrative Produktion -Industrie 4.0 -Aachener Perspektiven. edited by Brecher C., Klocke F., Schmitt R., Schuh G., Aachen, 2014:365-374.
11. Bauernhansl T., ten Hompel M., Vogel-Hauser B. Industrie 4.0 in Produktion, Automatisierung und Logistik -Anwendung -Technologien -Migration. Springer Vieweg, 2014:1-648.
12. Michniewicz J., Reinhart G. Cyber-physical robotics -automated analysis, programming and configuration of robot cells based on Cyber-Physical Systems, Procedia Technology, 2014; 15:567-576.
13. Schuh G., Gottschalk S., Hohne T. High resolution production management, CIRP Annals -Manufacturing Technology 2007; 56/1: 439-442.
14. Monostori L., Kemny Zs., Ilie-Zudor E., Szathmari M., Karnok D. Increased transparency within and beyond organizational borders by novel identifier-based services for enterprises of different size, CIRP Annals -Manufacturing Technology 2009; 58/1: 417-420.
15. Park K.-J., Zheng R., Liu X. Cyber-physical systems: Milestones and research challenges. Editorial. Computer Communications 2012, 36/1: 1-7.
16. N.N. NSF Workshop on Cyber-Physical Systems, October 16-17, 2006, Austin, Texas, US http://varma.ece.cmu.edu/CPS/.
17. N.N. Leadership under challenge: Information technology R & D in a competitive world, Presidents Council of Advisors on Science and Technology, 2007, 31-43. https://www.whitehouse. gov/sites/default/files/microsites/ostp/pcast-07-nitrdreview. pdf.
18. N.N. Cyber-Physical Systems (CPS), Directorate for Computer & Information Science & Engineering, National Science Foundation, 2015, http://www.nsf.gov/funding/pgm-summ.jsp?pims- id=503286.
19. N.N. Cyber-Physical Systems, Networking and Information Technology Research and Development (NITRD) CPS Senior Steering Group, 2012, p. 8, https://www.nitrd.gov/ nitrdgroups/images/6/6a/Cyber-Physical-Systems-%28CPS %29-Vision-Statement.pdf.
20. VDI/VDE-Gesellschaft Mess und Automatisierungstechnik (GMA). Cyber-physical systems: Chancen und nutzen aus Sicht der Automation Thesen und Handlungsfelder, April, 2013, 9.
21. Lee J., Bagheri B., Kao H.-A. A cyber-physical systems architecture for industry 4.0-based manufacturing systems. Manufacturing Letters 2015, 3: 18-23.
22. N.N.: Report to the president on capturing domestic competitive advantage in advancedmanufacturing, 2012 https://www. whitehouse.gov/sites/default/files/microsites/ostp/pcast- amp-steering-committee-report-final-july-27-2012.pdf.
23. Hatvany J., Nemes L. Intelligent manufacturing systems -a tentative forecast. Proc. of the VIIth IFAC World Congress, June 12-16, 1978, Helsinki, Finland, Vol. 2, pp. 895-899.
24. Hatvany J. The efficient use of deficient information, CIRP Annals -Manufacturing Technology 2013, 32/1: 423-425.
25. Monostori L. A step towards intelligent manufacturing: Modeling and monitoring of manufacturing processes through artificial neural networks. CIRP Annals -Manufacturing Technology 1993; 42/1: 485-488.
26. Monostori L., Markus A., Van Brussel H., Westkamper E. Machine learning approaches to manufacturing. CIRP Annals -Manufacturing Technology 1996; 45/2: 675-712.
27. Monostori L., Csaji, B.Cs. Stochastic dynamic production control by neurodynamic programming. CIRP Annals -Manufacturing Technology 2006; 55/1: 473-478.
28. Monostori L. AI and machine learning techniques for managing complexity, changes and uncertainties in manufacturing, Engineering Applications of Artificial Intelligence 2003; 16/4: 277-291.
29. Yoshikawa, H. Intelligent Manufacturing Systems Program (IMS), Technical Cooperation that Transcends Cultural Differences, University of Tokyo, Japan. 1992.
30. Byrne G., Dornfeld D., Inasaki I., Konig W., Teti R. Tool condition monitoring -The status of research and industrial applications. CIRP Annals -Manufacturing Technology 1995; 44/2:541-567.
31. Neugebauer R., Denkena B., Wegener K. Mechatronic systems for machine tools. CIRP Annals -Manufacturing Technology 2007; 56/2:657-686.
32. Teti R., Jemielniak K., ODonnel G., Dornfeld D. Advanced monitoring of machining operations. CIRP Annals -Manufacturing Technology 2010; 59/2:717-739.
33. Klocke F., et al. Sensoren fur die digitale Produktion. in: Integrative Produktion -Industrie 4.0 -Aachener Perspektiven. edited by Brecher, C., Klocke, F., Schmitt, R., Schuh, G., Aachen, 2014:271-296.
34. Brecher C., et al. Auf dem Weg zur selbstuberwachenden Werkzeugmaschinen. in: Integrative Produktion -Industrie 4.0 -Aachener Perspektiven. edited by Brecher, C., Klocke, F., Schmitt, R., Schuh, G., Aachen, 2014:297-330.
35. Ueda K., Vaario J., Ohkura K.H. Modelling of biological manufacturing systems for dynamic reconfiguration. CIRP Annals -Manufacturing Technology 1997; 46/1: 343-346.
36. Ueda K., Vaario J. The Biological Manufacturing System: Adaptation to growing complexity and dynamics in manufacturing environment, CIRP Journal of Manufacturing Systems, 1998, 27/1: 41-46.
37. Koren Y., Heisel Z., Jovane F., Moriwaki M., Pritschow G., Ulsoy G., Van Brussel H. Reconfigurable manufacturing systems. CIRP Annals -Manufacturing Technology 1999; 48/2: 527-540.
38. Maropoulos P.G. Digital Enterprise Technology-Defining perspectives and research priorities. Proc. of the 1st CIRP Seminar on Digital Enterprise Technology, Durham, UK, 2002; Part V: 3-12.
39. Kadar B., Lengyel A., Monostori L., Suginishi Y., Pfeiffer A., Nonaka Y. Enhanced control of complex production structures by tight coupling of the digital and the physical worlds. CIRP Annals -Manufacturing Technology 2010; 59/1: 437-440.
40. Kadar B., Terkaj W., Sacco M. Semantic Virtual Factory supporting interoperable modelling and evaluation of production systems. CIRP Annals -Manufacturing Technology 2013; 52/1: 443-446.
41. Monostori L., Kadar B., Pfeiffer A., Karnok D. Solution approaches to real-time control of customized mass production. CIRP Annals -Manufacturing Technology 2007, 56/1: 431-434.
42. Markus A., Kis T., Vancza J., Monostori L., Amarket approach to holonic manufacturing. CIRP Annals -Manufacturing Technology 1996; 45/1: 433-436.
43. Van Brussel H., Wyns J., Valckenaers P., Bongaerts L., Peeters P. Reference architecture for holonic manufacturing systems: PROSA. Computers in Industry 1998; 37:255-274.
44. Bongaerts L., Monostori L., McFarlane D., Kadar B. Hierarchy in distributed shop floor control. Computers in Industry 2000; 43/2: 123-137.
45. Valckenaers P., Van Brussel H. Holonic manufacturing execution systems. CIRP Annals -Manufacturing Technology 2005; 54/1: 427-432.
46. Monostori L., Vancza J., Kumara S.R.T. Agent-based systems for manufacturing. CIRP Annals -Manufacturing Technology 2006;55/2: 697-720.
47. Hatvany J. Intelligence and cooperation in heterarchic manufacturing systems. Robotics and Computer-Integrated Manufacturing 1985 2/2: 101-104.
48. Monostori L., Ueda K. Design of complex adaptive systems: Introduction. Advanced Engineering Informatics 2006; 20/3: 223-225.
49. Scholz-Reiter, B., Freitag, M. Autonomous processes in assembly systems. CIRP Annals -Manufacturing Technology 2007; 56/2: 712-729.
50. Arai T., Aiyama Y., Maeda Y., Sugi M., Ota J. Agile assembly systems by Plug and Produce, CIRP Annals -Manufacturing Technology 2000; 49/1: 1-4.
51. Feldmann K., Wolf W., Weber M. Design of a formal model for the specification of agent platforms based on Plug & Produceable Production System. Production Engineering, 2007, 1/3:321-328.
52. Sauer O., Ebel M. Plug-and-work von Produktionsanlagen und ubergeordneter Software, Beitrage der 37. Jahrestagung der Gesellschaft fur Informatik e.V. (GI), September 24-27, 2007, Bremen, Band 2:331-338.
53. Ueda, K., Synthesis and Emergence, Proceedings of International Workshop on Emergent Synthesis, IWES 99, edited by Ueda K., December 6-7, 1999, Kobe:7-12.
54. Ueda K., Markus A., Monostori L., Kals H.J.J., Arai T. Emergent synthesis methodologies for manufacturing. CIRP Annals -Manufacturing Technology 2001; 50/2: 535-551.
55. Holland J.H. Complex adaptive systems, Daedalus, Boston, 1992, 121/1: 17-30.
56. Holland J.H. Hidden order: How adaptation builds complexity, Helix Books, Addison-Wesley, New York, 1995.
57. Waldrop M. Complexity, the emerging science at the edge of order and chaos, VIKING, Penguin group, London, 1992.
58. Surana A., Kumara S., Greaves M., Raghavan U.N. Supply-Chain Networks: A Complex Adaptive Systems Perspective, Int. J. of Production Research, 2005, 43/20:4235-4265.
59. Wiendahl H.P., ElMaraghy H.A., Nyhuis P., Zaeh M.F., Wiendahl, H.H., Duffie N., Brieke M. Changeable manufacturing -Classification, design and operation. CIRP Annals -Manufacturing Technology 2007; 56/2: 783-809.
60. Tolio T., Ceglarek D., ElMaraghy H.A., Fischer A., Hu S.J., Laperrire L., Newman S.T., Vancza J. SPECIES -Co-evolution of products, processes and production systems, CIRP Annals -Manufacturing Technology 2010; 59/2: 672-693.
61. ElMaraghy W., ElMaraghy H., Tomiyama T., Monostori L. Complexity in engineering design and manufacturing, CIRP Annals -Manufacturing Technology 2012; 61/2: 793-814.
62. Meier H., Roy R., Seliger G. Industrial Product-Service Systems -IPS2. CIRP Annals -Manufacturing Technology 2010; 59/2: 607-627.
63. Abramovici, M. Smart products. CIRP Encyclopedia of Production Engineering:1-5.
64. Koren Y., Hu S.J., Gu P., Shpitalni M. Open-architecture products. CIRP Annals -Manufacturing Technology 2013; 62/2: 719-729.
65. Gupta A., Kumar M., Hansel S., Saini A.K. Future of all technologies -The cloud and cyber physical systems. International Journal of Enhanced Research in Science, Technology and Engineering 2013; 2/2: 1-6.
66. Wang L. Cyber manufacturing: Research and applications. Proceedings of the Tenth International Symposium on Tools and Methods of Competitive Engineering, TMCE 2014, May 19-23, 2014, Budapest, Hungary, 1:39-49.
67. Gao R., Wang L., Teti R., Dornfeld D., Kumara S., Mori M., Helu M. Cloud-enabled prognosis for manufacturing. CIRP Annals -Manufacturing Technology 2015; 64/2: 24, in print.
68. Monostori L., Kadar B. Holonic control of manufacturing systems, Preprints of the 1st IFACWorkshop on Multi-Agent-Systems in Production, December 2-4, 1999, Vienna, Austria: 109-114.
69. Schlechtendahl J., Keinert M., Kretschmer F., Lechler A., Verl A. Making existing production sytems Industry 4.0-ready -Holistic approach to the integration of existing production systems in Industry 4.0 environments. Production Engineering Research and Development 2015, 9:143-148.
70. Vancza J., Monostori L., Lutters E., Kumara S.R., Tseng M., Valckenaers P., Van Brussel H. Cooperative, responsive manufacturing enterprises. CIRP Annals -Manufacturing Technology 2011; 60/2: 797-820.
71. Monostori L. Cyber-physical production systems: Roots, expectations and R & D challenges, Procedia CIRP, 2014, 17:9-13.
72. Lee A.L. Computing foundations and practice for cyber physical systems: A preliminary report. Electrical Engineering and Computer Sciences, University at Berkeley, Technical Report No.: UCB/EECS-2007-2, May 21, 2007, p. 25.
73. Lee A.L. Cyber physical systems: Design Challenges. Electrical Engineering and Computer Sciences, University at Berkeley, Technical Report No.:UCB/EECS-2008-8, January 23, 2008, p. 8.
74. Poovendran R. Cyber-physical systems: Close encounters between two parallel worlds. Proceedings of the IEEE August 2010, 98/8: 1363-1366.
75. Park K.-J., Zheng R., Liu X. Cyber-physical systems: Milestones and research challenges. Editorial, Computer Communications 2012, 36/1:1-7.
76. Borgia E. The Internet of Things vision: Key features, applications and open issues. Computer Communications 2014, 54:1-31.
77. Jacobson C. The importance of cyber-physical systems for industry. ERCIM News, April 2014, 97:4-6.