Advances and Future Challenges in Printed Batteries

ChemSusChem

Volumn 8, Issue 21, 2015, Pages 3539-3555

  Sousa, Ricardo E ^a   Costa, Carlos M ^a   Lanceros Méndez, Senentxu ^a  

^a UNIVERSITY OF MINHO   (Portugal)

Author keywords

batteries; lithium; manganese; printing techniques; zinc

Indexed keywords

CONSUMER PRODUCTS; ELECTRIC BATTERIES; ELECTRODES; INDUSTRIAL RESEARCH; LITHIUM; LITHIUM ALLOYS; MANGANESE; PRINTING; SOLAR CELLS; ZINC;

CONVENTIONAL BATTERIES; FUTURE CHALLENGES; MANGANESE DIOXIDE; MANUFACTURING TECHNIQUES; PRINTING TECHNIQUES; PRINTING TECHNOLOGIES; RADIO FREQUENCIES; STATE OF THE ART;

LITHIUM-ION BATTERIES;

DEVICES; ELECTROCHEMISTRY; EQUIPMENT DESIGN; POWER SUPPLY; PRINTING; SURFACE PROPERTY;

ELECTRIC POWER SUPPLIES; ELECTROCHEMISTRY; EQUIPMENT DESIGN; PRINTING; SURFACE PROPERTIES;

EID: 84946565889     PISSN: 18645631     EISSN: 1864564X     Source Type: Journal    
DOI: 10.1002/cssc.201500657     Document Type: Article

References (116)

1. A. Kamyshny, S. Magdassi, Small 2014, 10, 3515-3535.
2. V. Subramanian, J.B. Chang, A.d.L.F. Vornbrock, D.C. Huang, L. Jagannathan, F. Liao, B. Mattis, S. Molesa, D.R. Redinger, D. Soltman, S.K. Volkman, Z. Qintao in Solid-State Device Research Conference, 2008. ESSDERC 2008. 38th European, 2008, pp.17-24.
3. G. Cummins, M. P. Y. Desmulliez, Circuit World 2012, 38, 193-213;
4. M. C. Dang, T. M. D. Dang, E. Fribourg-Blanc, Adv. Nat. Sci. Nanosci. Nanotechnol. 2013, 4, 015009.
5. H. Kipphan, Handbook of Print Media: Technologies and Production Methods, Springer, 2001;
6. J. M. Adams, P. A. Dolin, Printing Technology, Delmar, 2002.
7. Blue Spark, 2014. See http://www.bluesparktechnologies.com (accessed September 2015).
8. A. M. Gaikwad, D. A. Steingart, T. NgaNg, D. E. Schwartz, G. L. Whiting, Appl. Phys. Lett. 2013, 102, 233302.
9. Forbes, 2013. See http://www.forbes.com/sites/jenniferhicks/2011/11/22/enfucell-makes-batteries-thin-green-and-printable (accessed September 2015).
10. A. Willert, Fraunhofer Research Institution for Electronic Nano Systems (ENAS), 2009. See http://www.fraunhofer.de/content/dam/zv/en/documents/rn7-FERTIG-tcm63-13052.pdf (accessed September 2015).
11. A. M. Gaikwad, A. C. Arias, D. A. Steingart, Energy Technol. 2015, 3, 305-328.
12. G. Zhou, F. Li, H.-M. Cheng, Energy Environ. Sci. 2014, 7, 1307-1338.
13. S. Ferrari, M. Loveridge, S. D. Beattie, M. Jahn, R. J. Dashwood, R. Bhagat, J. Power Sources 2015, 286, 25-46.
14. B. Moore, The Roll-to-Roll Battery Revolution, in EV World 2005. See http://www.evworld.com/article.cfm?storyid=933 (accessed September 2015).
15. V. L. Pushparaj, M. M. Shaijumon, A. Kumar, S. Murugesan, L. Ci, R. Vajtai, R. J. Linhardt, O. Nalamasu, P. M. Ajayan, Proc. Natl. Acad. Sci. USA 2007, 104, 13574-13577.
16. Solicore, 2014. See http://www.brightvolt.com (accessed September 2015).
17. Y. Yang, S. Jeong, L. Hu, H. Wu, S. W. Lee, Y. Cui, Proc. Natl. Acad. Sci. USA 2011, 108, 13013-13018.
18. P. Harrop, H. Zervos, Batteries, Supercapacitors, Alternative Storage for Portable Devices 2009-2019, IDTechEx, 2010. See http://www.idtechex.com/research/reports/batteries-supercapacitors-alternative-storage-for-portable-devices-2009-2019-000224.asp (accessed September 2015).
19. Printable Battery Markets: 2009 and Beyond, NanoMarkets, LC, 2009.
20. A. Henry, Rochester Institute of Technology Journal 2010, 22, 20.
21. Thin-Film and Printed Batteries Markets, NanoMarkets, LC, 2007
22. Thin-Film and Printed Batteries Markets 2014-2021, NanoMarkets, LC, 2014.
23. Thin-Film and Printed Batteries: On-Board Solutions for Low-Power Electronics, NanoMarkets, LC, 2008.
24. C. T. Rodenbeck, IEEE Trans. Antennas Propag. 2006, 54, 3700-3706.
25. P.D. Mitcheson in Engineering in Medicine and Biology Society (EMBC), 2010 Annual International Conference of the IEEE, 2010, pp.3432-3436.
26. A. Ferrer-Vidal, A. Rida, S. Basat, Y. Li, M.M. Tentzeris, in Wireless Mesh Networks, 2006. WiMesh 2006. 2nd IEEE Workshop on, 2006, pp.126-128.
27. S.E. Molesa, Ultra-low-cost Printed Electronics, PhD Thesis, University of California, Berkeley, 2006.
28. J. Chang, G. Tong, E. Sanchez-Sinencio, in Circuits and Systems (MWSCAS), 2012 IEEE 55th International Midwest Symposium on, 2012, pp.582-585;
29. J. Chang, X. Zhang, T. Ge, J. Zhou, Org. Electron. 2014, 15, 701-710.
30. K. Suganuma, Introduction to Printed Electronics, Springer, Berlin, 2014.
31. C. M. Costa, M. M. Silva, S. Lanceros-Mendez, RSC Adv. 2013, 3, 11404-11417;
32. V. DiNoto, S. Lavina, G. A. Giffin, E. Negro, B. Scrosati, Electrochim. Acta 2011, 57, 4-13.
33. X. Yuan, H. Liu, J. Zhang, Lithium-Ion Batteries: Advanced Materials and Technologies, Taylor & Francis, London, 2011;
34. J. O. Besenhard, Handbook of Battery Materials, Wiley-VCH, Weinheim, 2008.
35. K. Marquardt, R. Hahn, T. Luger, H. Reichl, in Electronics Systemintegration Technology Conference, 2006. 1st, Vol.2, Wiley-VCH, Weinheim, 2006, pp. 1410-1416.
36. J. Yan, Q. Wang, T. Wei, Z. Fan, Adv. Energy Mater. 2014, 4, 1300816;
37. C. Zhao, C. Wang, R. Gorkin, III, S. Beirne, K. Shu, G. G. Wallace, Electrochem. Commun. 2014, 41, 20-23.
38. S. Ahson, M. Ilyas, RFID Handbook: Applications, Technology, Security, and Privacy, CRC Press, Boca Raton, 2008.
39. J. Han, W. Xie, K. Zhao, Z. Jiang, Device-Free Object Tracking Using Passive Tags, Springer, Berlin, 2014.
40. S.C. Tung, An Architectural Approach for Reducing Power and Increasing Security of RFID Tags, Ph.D. Thesis, University of Pittsburgh, 2008.
41. P.H. RaghuDas, RFID Forecasts, Players and Opportunities 2014-2024, IDTechEx, 2014.
42. T. M. Jurgensen, S. B. Guthery, Smart Cards: The Developer's Toolkit, Prentice-Hall, Englewood Cliffs, NJ, 2002.
43. L. Margetts, R. Sawyer, Contin. Educ. Anaesth. Crit. Care Pain 2007, 7, 171-176;
44. M. R. Prausnitz, R. Langer, Nat. Biotechnol. 2008, 26, 1261-1268.
45. G. Baura, Medical Device Technologies: A Systems Based Overview Using Engineering Standards, Academic Press, San Diego, CA, 2012.
46. J. Fraden, Handbook of Modern Sensors: Physics, Designs, and Applications, Springer, Berlin, 2010.
47. C. Namjun, S. Seong-Jun, K. Sunyoung, K. Shiho, Y. Hoi-Jun, in Solid-State Circuits Conference, 2005. ESSCIRC 2005. Proceedings of the 31st European, 2005, pp.279-282.
48. R. Tessier, D. Jasinski, A. Maheshwari, A. Natarajan, X. Weifeng, W. Burleson, IEEE Trans. Very Large Scale Integr. (VLSI) Syst. 2005, 13, 1190-1199.
49. J. Wu, K. S. Paudel, C. Strasinger, D. Hammell, A. L. Stinchcomb, B. J. Hinds, Proc. Natl. Acad. Sci. USA 2010, 107, 11698-11702.
50. T. B. AshokSridhar, R. R. Baumann, Mater. Matters 2011, 6, 12-15.
51. Handbook on Printing Technology (Offset, Gravure, Flexo, Screen), National Institute of Industrial Research, 2002.
52. A. Teichler, J. Perelaer, U. S. Schubert, J. Mater. Chem. C 2013, 1, 1910-1925.
53. R. H. Leach, The Printing Ink Manual, Springer, Berlin, 1993.
54. C. Yang, C. P. Wong, M. M. F. Yuen, J. Mater. Chem. C 2013, 1, 4052-4069.
55. H. W. Choi, T. Zhou, M. Singh, G. E. Jabbour, Nanoscale 2015, 7, 3338-3355.
56. D. R. Gamota, Printed Organic and Molecular Electronics, Springer, New York, 2004.
57. I. M. Hutchings, G. D. Martin, Inkjet Technology for Digital Fabrication, Wiley, Chichester, 2012;
58. P. J. Smith, A. Morrin, J. Mater. Chem. 2012, 22, 10965-10970.
59. V. Subramanian, D. Sung, Gravure as an Industrially Viable Process for Printed Electronics, University of California, Berkeley 2008. See http://www.eecs.berkeley.edu/Pubs/TechRpts/2008/EECS-2008-70.pdf (accessed September 2015);
60. Gravure: Process and Technology, Gravure Association of America, 1991;
61. K.-J. Baeg, M. Caironi, Y.-Y. Noh, Adv. Mater. 2013, 25, 4210-4244;
62. M. A. M. Leenen, V. Arning, H. Thiem, J. Steiger, R. Anselmann, Phys. Status Solidi A 2009, 206, 588-597;
63. D. Tobjörk, R. Österbacka, Adv. Mater. 2011, 23, 1935-1961.
64. S. Khan, R. Dahiya, L. Lorenzelli, Proceedings of the European Solid-State Device Research Conference 2014, pp.86-89.
65. D. S. Kim, J. S. Kim, M. C. Lee, Jpn. J. Appl. Phys. 2014, 53, 05HC 08.
66. C. R. Tuck, M. C. B. Ellis, P. C. H. Miller, Crop Prot. 1997, 16, 619-628.
67. R. R. Søndergaard, M. Hösel, F. C. Krebs, J. Polym. Sci. Part B 2013, 51, 16-34;
68. W.-Y. Chang, T.-H. Fang, S.-H. Yeh, Y.-C. Lin, Sensors 2009, 9, 1188-1203.
69. Screen Printing Technology Handbook, National Institute of Industrial Research, 2003.
70. M. Singh, H. M. Haverinen, P. Dhagat, G. E. Jabbour, Adv. Mater. 2010, 22, 673-685.
71. B. Scrosati, K. M. Abraham, W. A. van Schalkwijk, J. Hassoun, Lithium Batteries: Advanced Technologies and Applications, Wiley, New York, 2013.
72. M. Wakihara, O. Yamamoto, Lithium Ion Batteries: Fundamentals and Performance, Wiley-VCH, Weinheim, 2008.
73. R. Dell, D. A. J. Rand, Understanding Batteries, Royal Society of Chemistry, London, 2001.
74. J. K. Park, Principles and Applications of Lithium Secondary Batteries, Wiley-VCH, Weinheim, 2012.
75. C. deLasCasas, W. Li, J. Power Sources 2012, 208, 74-85.
76. M. Minakshi, M. Ionescu, Int. J. Hydrogen Energy 2010, 35, 7618-7622.
77. S. Logothetidis, Handbook of Flexible Organic Electronics: Materials, Manufacturing and Applications, Elsevier Science, Oxford, 2014.
78. P. P. Prosini, R. Mancini, L. Petrucci, V. Contini, P. Villano, Solid State Ionics 2001, 144, 185-192.
79. M.-S. Park, S.-H. Hyun, S.-C. Nam, Electrochim. Acta 2007, 52, 7895-7902.
80. S. Ohta, S. Komagata, J. Seki, T. Saeki, S. Morishita, T. Asaoka, J. Power Sources 2013, 238, 53-56.
81. K.-Y. Kang, Y.-G. Lee, D. O. Shin, J.-C. Kim, K. M. Kim, Electrochim. Acta 2014, 138, 294-301.
82. D. Golodnitsky, V. Yufit, M. Nathan, I. Shechtman, T. Ripenbein, E. Strauss, S. Menkin, E. Peled, J. Power Sources 2006, 153, 281-287.
83. Y. Zhao, Q. Zhou, L. Liu, J. Xu, M. Yan, Z. Jiang, Electrochim. Acta 2006, 51, 2639-2645.
84. S.-T. Lee, S.-W. Jeon, B.-J. Yoo, S.-D. Choi, H.-J. Kim, S.-M. Lee, J. Power Sources 2006, 155, 375-380.
85. M. S. Park, S. H. Hyun, S. C. Nam, J. Power Sources 2006, 159, 1416-1421.
86. G. Dennler, S. Bereznev, D. Fichou, K. Holl, D. Ilic, R. Koeppe, M. Krebs, A. Labouret, C. Lungenschmied, A. Marchenko, D. Meissner, E. Mellikov, J. Méot, A. Meyer, T. Meyer, H. Neugebauer, A. Öpik, N. S. Sariciftci, S. Taillemite, T. Wöhrle, Solar Energy 2007, 81, 947-957.
87. J. Huang, J. Yang, W. Li, W. Cai, Z. Jiang, Thin Solid Films 2008, 516, 3314-3319.
88. L. Hu, H. Wu, F. LaMantia, Y. Yang, Y. Cui, ACS Nano 2010, 4, 5843-5848.
89. D. Wei, P. Andrew, H. Yang, Y. Jiang, F. Li, C. Shan, W. Ruan, D. Han, L. Niu, C. Bower, T. Ryhanen, M. Rouvala, G. A. J. Amaratunga, A. Ivaska, J. Mater. Chem. 2011, 21, 9762-9767.
90. A. Izumi, M. Sanada, K. Furuichi, K. Teraki, T. Matsuda, K. Hiramatsu, H. Munakata, K. Kanamura, Electrochim. Acta 2012, 79, 218-222.
91. E.-H. Kil, K.-H. Choi, H.-J. Ha, S. Xu, J. A. Rogers, M. R. Kim, Y.-G. Lee, K. M. Kim, K. Y. Cho, S.-Y. Lee, Adv. Mater. 2013, 25, 1395-1400.
92. N. Singh, C. Galande, A. Miranda, A. Mathkar, W. Gao, A. L. M. Reddy, A. Vlad, P. M. Ajayan, Sci. Rep. 2012, 2, 481.
93. K. Sun, T.-S. Wei, B. Y. Ahn, J. Y. Seo, S. J. Dillon, J. A. Lewis, Adv. Mater. 2013, 25, 4539-4543.
94. D. Beneventi, D. Chaussy, D. Curtil, L. Zolin, E. Bruno, R. Bongiovanni, M. Destro, C. Gerbaldi, N. Penazzi, S. Tapin-Lingua, Chem. Eng. J. 2014, 243, 372-379.
95. J. Pröll, H. Kim, A. Piqué, H. J. Seifert, W. Pfleging, J. Power Sources 2014, 255, 116-124.
96. A. Izumi, M. Sanada, K. Furuichi, K. Teraki, T. Matsuda, K. Hiramatsu, H. Munakata, K. Kanamura, J. Power Sources 2014, 256, 244-249.
97. P. E. Delannoy, B. Riou, B. Lestriez, D. Guyomard, T. Brousse, J. LeBideau, J. Power Sources 2015, 274, 1085-1090.
98. P. Kumar, F.-Y. Wu, L.-H. Hu, S. AliAbbas, J. Ming, C.-N. Lin, J. Fang, C.-W. Chu, L.-J. Li, Nanoscale 2015, 7, 8093-8100.
99. A. Kiebele, G. Gruner, Appl. Phys. Lett. 2007, 91, 144104.
100. M. G. Choi, K. M. Kim, Y.-G. Lee, Curr. Appl. Phys. 2010, 10, e 92 -e 96.
101. A. M. Gaikwad, G. L. Whiting, D. A. Steingart, A. C. Arias, Adv. Mater. 2011, 23, 3251-3255.
102. A. M. Gaikwad, H. N. Chu, R. Qeraj, A. M. Zamarayeva, D. A. Steingart, Energy Technol. 2013, 1, 177-185.
103. X. Yu, Y. Fu, X. Cai, H. Kafafy, H. Wu, M. Peng, S. Hou, Z. Lv, S. Ye, D. Zou, Nano Energy 2013, 2, 1242-1248.
104. Z. Wang, N. Bramnik, S. Roy, G. DiBenedetto, J. L. Zunino, III, S. Mitra, J. Power Sources 2013, 237, 210-214.
105. Z. Wang, R. Winslow, D. Madan, P. K. Wright, J. W. Evans, M. Keif, X. Rong, J. Power Sources 2014, 268, 246-254.
106. W. G. Tam, J. S. Wainright, J. Power Sources 2007, 165, 481-488.
107. M. Hilder, B. Winther-Jensen, N. B. Clark, J. Power Sources 2009, 194, 1135-1141.
108. C. C. Ho, K. Murata, D. A. Steingart, J. W. Evans, P. K. Wright, J. Micromech. Microeng. 2009, 19, 094013.
109. K. T. Braam, S. K. Volkman, V. Subramanian, J. Power Sources 2012, 199, 367-372.
110. S. Berchmans, A. J. Bandodkar, W. Jia, J. Ramirez, Y. S. Meng, J. Wang, J. Mater. Chem. A 2014, 2, 15788-15795.
111. K. Braam, V. Subramanian, Adv. Mater. 2015, 27, 689-694.
112. T. Janoschka, A. Teichler, B. Häupler, T. Jähnert, M. D. Hager, U. S. Schubert, Adv. Energy Mater. 2013, 3, 1025-1028.
113. S. Yoshihara, H. Isozumi, M. Kasai, H. Yonehara, Y. Ando, K. Oyaizu, H. Nishide, J. Phys. Chem. B 2010, 114, 8335-8340.
114. Mie Industry and Enterprise Support Center (MIESC) Advanced Materials Innovation Center (AMIC), 2010.
115. M. Wendler, G, Hübner, M. Krebs, Development of Printed Thin and Flexible Batteries, 2010. See https://www.hdm-stuttgart.de/international-circle/circular/issues/11-01/ICJ-04-32-wendler-huebner-krebs.pdf (accessed September 2015).
116. Enfucell, 2014. See http://www.enfucell.com (accessed September 2015).