Methylimidazolium group - Modified polyvinyl chloride (PVC) doped with phosphoric acid for high temperature proton exchange membranes

Materials and Design

Volumn 87, Issue , 2015, Pages 1047-1055

  Che, Quantong ^a   Zhu, Zefeng ^a   Chen, Ning ^a   Zhai, Xuan ^a  

^a NORTHEASTERN UNIVERSITY   (China)

Author keywords

Conductivity; Phosphoric acid; Polymerization ionic liquid; Polyvinyl chloride; Proton exchange membrane

Indexed keywords

ELECTRIC CONDUCTIVITY; ELECTROLYTES; ION EXCHANGE; IONIC LIQUIDS; LIQUIDS; MEMBRANES; NEGATIVE IONS; PHOSPHORIC ACID; POLYMERIZATION; PROTON CONDUCTIVITY;

ANHYDROUS CONDITIONS; FILM-FORMING PROPERTIES; HIGH TEMPERATURE PROTON EXCHANGE MEMBRANE; LOW CONDUCTIVITY; MEMBRANE ELECTROLYTES; N-METHYLIMIDAZOLE; POLYVINYL CHLORIDE (PVC); PROTON EXCHANGE MEMBRANES;

POLYVINYL CHLORIDES;

EID: 84944205401     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2015.08.092     Document Type: Article

References (50)

1. Radhakrishnan V., Haridoss P. Differences in structure and property of carbon paper and carbon cloth diffusion media and their impact on proton exchange membrane fuel cell flow field design. Mater. Des. 2011, 32:861-868.
2. Li Q.F., He R.H., Jensen J.O., Bjerrum N.J. Approaches and recent development of polymer electrolyte membranes for fuel cells operating above 100 degrees C. Chem. Mater. 2003, 15(26):4896-4915.
3. Xu C.X., Liu X.T., Cheng J.G., Scott K. A polybenzimidazole/ionic-liquid-graphite-oxide composite membrane for high temperature polymer electrolyte membrane fuel cells. J. Power Sources 2015, 274:922-927.
4. 2 hybrid electrolytes for high performance proton exchange membrane fuel cells operating at high temperature and low humidity. Electrochim. Acta 2013, 94:353-359.
5. Li Q.F., He R.H., Berg R.W., Hjuler H.A., Bjerrum N.J. Water uptake and acid doping of polybenzimidazoles as electrolyte membranes for fuel cells. Solid State Ionics 2004, 168(1-2):177-185.
6. Jiang S.P. Functionalized mesoporous structured inorganic materials as high temperature proton exchange membranes for fuel cells. J. Mater. Chem. A 2014, 2(21):7637-7655.
7. Singha S., Jana T. Effect of composition on the properties of PEM based on polybenzimidazole and poly(vinylidene fluoride) blends. Polymer 2014, 55(2):594-601.
8. Fuller J., Breda A.C., Carlin R.T. Ionic liquid-polymer gel electrolytes. J. Electrochem. Soc. 1997, 144(4):L67-L70.
9. Che Q.T., He R.H., Yang J.S., Feng L., Savinell R.F. Phosphoric acid doped high temperature proton exchange membranes based on sulfonated polyetheretherketone incorporated with ionic liquids. Electrochem. Commun. 2010, 12:647-649.
10. Wilkes J.S., Zaworotko M.J. Air and water stable 1-ethyl-3-methylimidazolium based ionic liquids. J. Chem. Soc. Chem. Commun. 1992, 13:965-967.
11. Welton T. Room-temperature ionic liquids. Solvents for synthesis and catalysis. Chem. Rev. 1999, 99(8):2071-2083.
12. Armand M., Endres F., MacFarlane D.R., Ohno H., Scrosati B. Ionic-liquid materials for the electrochemical chanllenges of the future. Nat. Mater. 2009, 8:621-629.
13. 3-doped sulfonated poly (ether ether ketone) composite membrane for fuel cells. J. Appl. Polym. Sci. 2015, 132:41946.
14. Carlin R.T., Fuller J. Ionic liquid-polymer gel catalytic membrane. Chem. Commun. 1997, 15:1345-1346.
15. Singh B., Hundal M.S., Park G.G., Park J.S., Lee W.Y., Kim C.S., Yamada K., Sekhon S.S. Non-aqueous polymer electrolytes containing room temperature ionic liquid: 2, 3-dimethyl-1-octylimidazolium tetrafluoroborate. Solid State Ionics 2007, 178(23):1404-1410.
16. Che Q.T., Sun B.Y., He R.H. Preparation and characterization of new anhydrous, conducting membranes based on composites of ionic liquid trifluoroacetic propylamine and polymers of sulfonated poly (ether ether) ketone or polyvinylidenefluoride. Electrochim. Acta 2008, 53:4428-4434.
17. Yi S.Z., Zhang F.F., Li W., Huang C., Zhang H.N., Pan M. Anhydrous elevated-temperature polymer electrolyte membranes based on ionic liquids. J. Membr. Sci. 2011, 366:349-355.
18. Che Q.T., Zhou L., Wang J.L. Fabrication and characterization of phosphoric acid doped imidazolium ionic liquid polymer composite membranes. J. Mol. Liq. 2015, 206:10-18.
19. Lin B.C., Cheng S., Qiu L.H., Yan F., Shang S.M., Lu J.M. Protic ionic liquid-based hybrid proton-conducting membranes for anhydrous proton exchange membrane application. Chem. Mater. 2010, 22(5):1807-1813.
20. Hirao M., Ito K., Ohno H. Preparation and polymerization of new organic molten salts; N-alkylimidazolium salt derivatives. Electrochim. Acta 2000, 45:1291-1294.
21. Lemus J., Eguizábal A., Pina M.P. UV polymerization of room temperature ionic liquids for high temperature PEMs: study of ionic moieties and crosslinking effects. Int. J. Hydrogen Energy 2015, 40:5416-5424.
22. Bandomir J., Schulz A., Taguchi S., Schmitt L., Ohno H., Sternberg K., Schmitz K.P., Kragl U. Synthesis and characterisation of polymerized ionic liquids: mechanical and thermal properties of a novel type of hydrogels. Macromol. Chem. Phys. 2014, 215:716-724.
23. Lu F., Gao X.P., Dong B., Sun P.P., Sun N., Xie S.T., Zheng L.Q. Nanostructured proton conductors formed via in situ polymerization of ionic liquid crystals. ACS Appl. Mater. Interfaces 2014, 6(24):21970-21977.
24. Yuan J.Y., Antonietti M. Poly(ionic liquid)s: polymers expanding classical property profiles. Polymer 2011, 52:1469-1482.
25. Hoover M.F. Cationic quaternary polyelectrolytes. J. Macromol. Sci.-Chem. 1970, 4:1327-1418.
26. Salamone J.C., Taylor P., Snider B., Israel S.C. Copolymerization behavior of vinylimidazolium salts. J. Polym. Sci. Polym. Chem. Ed. 1975, 13:161-170.
27. Abu Bakar N., Chee C.Y., Abdullah L.C., Ratnam C.T., Ibrahim N.A. Thermal and dynamic mechanical properties of grafted kenaf filled poly (vinyl chloride)/ethylene vinyl acetate composites. Mater. Des. 2015, 65:204-211.
28. El-Shekeil Y.A., Sapuan S.M., Jawaid M., Al-Shuja'a O.M. Influence of fiber content on mechanical, morphological and thermal properties of kenaf fibers reinforced poly(vinyl chloride)/thermoplastic polyurethane poly-blend composites. Mater. Des. 2014, 58:130-135.
29. Kalousková R., Fartáková H., Malinová L., Brožek J. A new strategy for plasticizing and stabilization of PVC mixtures. J. Appl. Polym. Sci. 2014, 131(22):41066.
30. Tomar P.A., Yadav S.M., Gupta G.R. The thermal gravimetric studies for polymer samples of polyvinyl chloride (PVC) and polyvinyl alcohol (PVA) obtained by treatment with ionic liquid [bmim]Br. Polym. Bull. 2014, 71:1349-1358.
31. Livi S., Duchet-Rumeau J., Gérard J., Pham T.N. Polymers and ionic liquids: a successful wedding. Macromol. Chem. Phys. 2015, 216(4):359-368.
32. Martinez G., de Santos E., Millan J.L. Synthesis of PVC-graft-PMMA through stereoselective nucleophilic substitution on PVC. Macromol. Chem. Phys. 2001, 202:2377-2386.
33. Nieuwenhuyzen M., Seddon K.R., Teixidor F., Puga A.V., Vinas C. Ionic liquids containing boron cluster anions. Inorg. Chem. 2009, 48:889-901.
34. Wu J.L., Chen T.J., Luo X.T., Han D.Z., Wang Z.Q., Wu J.H. TG/FTIR analysis on co-pyrolysis behavior of PE, PVC and PS. Waste Manag. 2014, 34:676-682.
35. Ma Y., Wainright J.S., Litt M.H., Savinell R.F. Conductivity of PBI membranes for high-temperature polymer electrolyte fuel cells. J. Electrochem. Soc. 2004, 151:A8-A16.
36. Munoz M., Domínguez C.M., de Pedro Z.M., Quintanilla A., Casas J.A., Rodriguez J.J. Ionic liquids breakdown by Fenton oxidation. Catal. Today 2015, 240:16-21.
37. Siedlecka E.M., Mrozik W., Kaczyński Z., Stepnowski P. Degradation of 1-butyl-3-methylimidazolium chloride ionic liquid in a Fenton-like system. J. Hazard. Mater. 2008, 154:893-900.
38. Domínguez C.M., Munoz M., Quintanilla A., de Pedro Z.M., Ventura S.P.M., Coutinho J.A.P., Casas J.A., Rodriguez J.J. Degradation of imidazolium-based ionic liquids in aqueous solution by Fenton oxidation. J. Chem. Technol. Biotechnol. 2014, 89(8):1197-1202.
39. Fernandes A.C., Ticianelli E.A. A performance and degradation study of Nafion 212 membrane for proton exchange membrane fuel cells. J. Power Sources 2009, 193:547-554.
40. Yu S., Xiao L., Benicewicz B.C. Durability studies of PBI-based high temperature PEMFCs. Fuel Cells 2008, 8:165-174.
41. Staudt R. Development of polybenzimidazole-based high temperature membrane and electrode assemblies for stationary applications. 2006 Annual progress report http://www.hydrogen.energy.gov/pdfs/progress06/v_b_5_staudt.pdf.
42. Wannek C., Kohnen B., Oetjen H.F., Lippert H., Mergel J. Durability of ABPBI-based MEAs for high temperature PEMFCs at different operating conditions. Fuel Cells 2008, 2:87-95.
43. 4 membrane in a life test. Electrochim. Acta 2009, 54:7121-7127.
44. Li Q.F., Jensen J.O., Savinell R.F., Bjerrum N.J. High temperature proton exchange membranes based on polybenzimidazoles for fuel cells. Prog. Polym. Sci. 2009, 34:449-477.
45. 4. Polym. Test. 2011, 30(8):881-886.
46. 1H NMR and A.C. conductivity measurements. Solid State Ionics 1983, 9-10:1093-1098.
47. Chin D.T., Chang H.H. On the conductivity of phosphoric acid electrolyte. J. Appl. Electrochem. 1989, 19(1):95-99.
48. Cho E., Park J.S., Sekhon S.S., Park G.G., Yang T.H., Lee W.Y., Kim C.S., Park S.B. A study on proton conductivity of composite membranes with various ionic liquids for high-temperature anhydrous fuel cells. J. Electrochem. Soc. 2009, 156(2):B197-B202.
49. Gao Y., Robertson G.P., Guiver M.D., Wang G.Q., Jian X.G., Mikhailenko S.D., Li X., Kaliaguine S. Sulfonated copoly(phthalazinone ether ketone nitrile)s as proton exchange membrane materials. J. Membr. Sci. 2006, 278:26-34.
50. Aili D., Hansen M.K., Pan C., Li Q.F., Christensen E., Jensen J.O., Bjerrum N.J. Phosphoric acid doped membranes based on Nafion®, PBI and their blends-Membrane preparation, characterization and steam electrolysis testing. Int. J. Hydrogen Energy 2011, 36:6985-6993.