Fatigue behavior of a low-alloy steel with nanostructured surface obtained by severe shot peening

Engineering Fracture Mechanics

Volumn 81, Issue , 2012, Pages 56-68

  Bagherifard, Sara ^a   Guagliano, Mario ^a  

^a POLITECNICO DI MILANO   (Italy)

Author keywords

Fatigue strength; Nanograins; Roughness; Severe shot peening (SSP); X ray diffraction

Indexed keywords

AIR BLAST; FATIGUE BEHAVIOR; FATIGUE STRENGTH; LOW ALLOY STEELS; NANO GRAINS; NANOCRYSTALLIZED LAYER; NANOSTRUCTURED SURFACE; ROTATING BENDING FATIGUE; SEVERE SHOT PEENING (SSP); SURFACE LAYERS; TREATMENT PARAMETERS; X-RAY DIFFRACTION MEASUREMENTS;

BENDING TESTS; FATIGUE OF MATERIALS; FATIGUE TESTING; SHOT PEENING; X RAY DIFFRACTION;

SURFACE ROUGHNESS;

EID: 84856330726     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2011.06.011     Document Type: Article

References (37)

1. Almen J.O., Black P.H. Residual stresses and fatigue in metals 1963, McGraw-Hill Publ.
2. Marsh K.J. Shot peening: techniques and applications 1993, EMAS, London.
3. Schulze V. Modern mechanical surface treatment, states, stability, effects 2006, WILEY-VCH.
4. Bagheri S., Guagliano M. Review of shot peening processes to obtain nanocrystalline surfaces in metal alloys. Surf Eng 2009, 25:1-14.
5. Hanlon T., Kwon Y.N., Suresh S. Grain size effects on the fatigue response of nanocrystalline metals. Scripta Mater 2003, 49:675-680.
6. Padilla H.A., Boyce B.L. A review of fatigue behavior in nanocrystalline metals. Exp Mech 2010, 50:5-23.
7. Martin U., Altenberger I., Scholtes B., Kremmer K., Oettel H. Cyclic deformation and near surface microstructures of normalized shot peened steel SAE 1045. Mater Sci Eng A 1998, 246:69-80.
8. Altenberger I., Scholtes B., Martin U., Oettel H. Cyclic deformation and near surface microstructures of shot peened or deep rolled austenitic stainless steel AISI 304. Mater Sci Eng A 1999, 264:1-16.
9. Mano H., Kondo S., Matsumuro A. Microstructured surface layer induced by shot peening and its effect on fatigue strength. J Japan Inst Met 2006, 70:415-419.
10. Jiang X.P., Wang X.Y., Li J.X., Li D.Y., Man C.S., Shepard M.J., et al. Enhancement of fatigue and corrosion properties of pure Ti by sandblasting. Mater Sci Eng A 2006, 429:30-35.
11. Roland T., Retraint D., Lu K., Lu J. Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment. Scripta Mater 2006, 54:1949-1954.
12. Li D., Chen H.N., Xu H. The effect of nanostructured surface layer on the fatigue behaviors of carbon steel. Appl Surf Sci 2009, 255:3811-3816.
13. Villegas J.C., Shaw L.L., Dai K., Yuan W., Tian J., Liaw P.K., et al. Enhanced fatigue resistance of a nickel-based hastelloy induced by surface nanocrystallization and hardening process. Philos Mag Lett 2005, 8:427-438.
14. Tian J.W., Villegas J.C., Yuan W., Fielden D., Shaw L., Liaw P.K., et al. A study of the effect of nanostructured surface layers on the fatigue behaviors of a C-2000 superalloy. Mater Sci Eng A 2007, 468-470:164-170.
15. Dai K., Shaw L. Analysis of fatigue resistance improvements via surface severe plastic deformation. Int J Fatigue 2008, 3:1398-1408.
16. Shaw L.L., Tian J.W., Ortiz A.L., Dai K., Villegas J.C., Liaw P.L., et al. A direct comparison in the fatigue resistance enhanced by surface severe plastic deformation and shot peening in a C-2000 superalloy. Mater Sci Eng A 2010, 527:986-994.
17. Akiniwa Y., Kimura H., Sasaki T. Effect of residual stresses on fatigue strength of severely surface deformed steels by shot peening. Powder Diffr Suppl 2009, 24:37-40.
18. Noyan I.C., Cohen J.B. Residual stress measurement by diffraction and interpretation 1987, Springer, New York.
19. Moore M.G., Evans W.P. Corrections for stress layers in X-ray diffraction residual stress analysis. SAE Trans 1958, 66:340-345.
20. Saitoh H, Ochi T. Kubota M. Formation of surface nanocrystalline structure in steels by air blast shot peening. In: Proceedings of the 10th international conference on shot peening, Japan 2008. p. 488-93.
21. Shaw L., Villegas J., Huang J.Y., Chen S. Strengthening via deformation twinning in nickel alloys. Mater Sci Eng A 2008, 480:75-83.
22. Bagherifard S., Ghelichi R., Guagliano M. A numerical model of severe shot peening (SSP) to predict the generation of a nanostructured surface layer of material. Surf Coat Technol 2010, 204:4081-4090.
23. ISO 4278. Geometrical product specifications (GPS) - surface texture: profile method- terms, definitions and surface texture parameters. 1st ed.; 1997.
24. Mai Y.J., Jie X.H., Liu L.L., Yu N., Zheng X.X. Thermal stability of nanocrystalline layers fabricated by surface nanocrystallization. Appl Surf Sci 2010, 256:1972-1975.
25. Fuchs H.O., Stephens R.I. Metal fatigue in engineering 1980, John Wiley and Sons.
26. Fuchs H.O. The effect of self stresses on high cycle fatigue. J Test Eval Am Soc Test Mater 1982, 168-173.
27. Guechichi H., Catex L. Fatigue limit prediction of surface treated materials. J Mater Process Technol 2006, 172:381-387.
28. Kirk D, Abyaneh MY. Theoretical basis of shot peening coverage control. In: Proceedings of the 5th international conference on shot peening; 1993. p. 183-90.
29. Kirk D., Abyaneh M.Y. Theoretical basis of shot peening coverage control. Shot Peener 1995, 9-2:28-30.
30. Kirk D. Coverage: development, measurement, control and significance. Shot Peener 2002, 16(4):33-36.
31. Kirk D. Theoretical principles of shot peening coverage. Shot Peener 2005, 19-2:24-26.
32. Avrami M. Kinetics of phase change. I. General theory. J Chem Phys 1939, 7(12):1103-1112.
33. Avrami M. Kinetics of phase change. II. Transformation-time relations for random distribution of nuclei. J Chem Phys 1940, 8(2):212-224.
34. Avrami M. Kinetics of phase change. III. Granulation, phase change, and microstructure. J Chem Phys 1941, 9(2):177-184.
35. Dai K., Villegas J., Stone Z., Shaw L. Finite element modeling of the surface roughness of 5052 Al alloy subjected to a surface severe plastic deformation process. Acta Mater 2004, 52:5771-5782.
36. Benedetti M., Fontanari V., Scardi P., Ricardo C.L.A., Bandini M. Reverse bending fatigue of shot peened 7075-T651 aluminium alloy: the role of residual stress relaxation. Int J Fatigue 2009, 31:1225-1236.
37. ASTM E739 - 10 Standard Practice for Statistical Analysis of Linear or Linearized stress-life (S-N) and strain-life (ε-N) fatigue data.