Multi-Event Excitation Force Model for Inner Race Defect in a Rolling Element Bearing

Journal of Tribology

Volumn 138, Issue 1, 2016, Pages

  Khanam, Sidra ^a   Tandon, N ^a   Dutt, J K ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY DELHI   (India)

Author keywords

entry event; impact event; local faults; multi event excitation force model; rolling element bearings; vibration model based fault identification

Indexed keywords

BEARINGS (MACHINE PARTS); DEFECTS; DEFORMATION; RUNGE KUTTA METHODS;

ENTRY EVENT; EXCITATION FORCE; FAULT IDENTIFICATIONS; IMPACT EVENTS; LOCAL FAULTS; ROLLING ELEMENT BEARING;

ROLLER BEARINGS;

EID: 84942876103     PISSN: 07424787     EISSN: 15288897     Source Type: Journal    
DOI: 10.1115/1.4031394     Document Type: Article

References (72)

1. Tandon, N., and Choudhury, A., 1999, "A Review of Vibration and Acoustic Measurement Methods for the Detection of Defects in Rolling Element Bearings," Tribol. Int., 32(8), pp. 469-480.
2. Patil, M. S., Mathew, J., and Rajendrakumar, P. K., 2008, "Bearing Signature Analysis as a Medium for Fault Detection: A Review," ASME J. Tribol., 130(1), p. 014001.
3. Graney, B. P., and Starry, K., 2012, "Rolling Element Bearing Analysis," Mater. Eval., 70(1), pp. 78-85.
4. Lynagh, N., Rahnejat, H., Ebrahimi, M., and Aini, R., 2000, "Bearing Induced Vibration in Precision High Speed Routing Spindles," Int. J. Mach. Tools Manuf., 40(4), pp. 561-577.
5. Wardle, F. P., 1988, "Vibration Forces Produced by Waviness of the Rolling Surfaces of Thrust Loaded Ball Bearings - Part 1: Theory," Proc. Inst. Mech. Eng., Part C, 202(5), pp. 305-312.
6. Rai, V. K., and Mohanty, A. R., 2007, "Bearing Fault Diagnosis Using FFT of Intrinsic Mode Functions in Hilbert-Huang Transform," Mech. Syst. Signal Process., 21(6), pp. 2607-2615.
7. Vafaei, S., Rahnejat, H., and Aini, R., 2002, "Vibration Monitoring of High Speed Spindle Using Spectral Analysis Techniques," Int. J. Mach. Tools Manuf., 42(11), pp. 1223-1224.
8. Sunnersjo, C. S., 1978, "Varying Compliance Vibrations of Rolling Bearings," J. Sound Vib., 58(3), pp. 363-373.
9. Gupta, P. K., 1979, "Dynamics of Rolling Element Bearings, Part III: Ball Bearing Analysis," ASME J. Tribol., 101(3), pp. 313-318.
10. Gupta, P. K., 1979, "Dynamics of Rolling Element Bearings, Part IV: Ball Bearing Results," ASME J. Tribol., 101(3), pp. 319-326.
11. Rahnejat, H., and Gohar, R., 1985, "The Vibrations of Radial Ball Bearings," Proc. Inst. Mech. Eng., Part C, 199(3), pp. 181-193.
12. Liew, A., Feng, N., and Hahn, E. J., 2002, "Transient Rotordynamic Modeling of Rolling Element Bearing Systems," ASME J. Eng. Gas Turbines Power, 124(4), pp. 984-991.
13. Bhattacharyya, K., and Dutt, J. K., 1997, "Unbalance Response and Stability Analysis of Horizontal Rotor Systems Mounted on Nonlinear Rolling Element Bearings With Viscoelastic Supports," ASME J. Vib. Acoust., 119(4), pp. 539-544.
14. Panda, K. C., and Dutt, J. K., 1999, "Design of Optimum Support Parameters for Minimum Rotor Response and Maximum Stability Limit," J. Sound Vib., 223(1), pp. 1-21.
15. Panda, K. C., and Dutt, J. K., 2003, "Optimum Support Characteristics for Rotor-Shaft System With Preloaded Rolling Element Bearings," J. Sound Vib., 260(4), pp. 731-755.
16. Kappaganthu, K., and Nataraj, C., 2011, "Nonlinear Modeling and Analysis of a Rolling Element Bearing With a Clearance," Commun. Nonlinear Sci. Numer. Simul., 16(10), pp. 4134-4145.
17. Ashtekar, A., and Sadeghi, F., 2011, "Experimental and Analytical Investigation of High Speed Turbocharger Ball Bearings," ASME J. Eng. Gas Turbines Power, 133(12), p. 122501.
18. Zhang, Y.-Y., Wang, X.-L., Zhang, X.-Q., and Yan, X.-L., 2014, "Dynamic Analysis of a High-Speed Rotor-Ball Bearing System Under Elastohydrodynamic Lubrication," ASME J. Vib. Acoust., 136(6), p. 061003.
19. Hoeprich, M. R., 1992, "Rolling Element Bearing Fatigue Damage Propagation," ASME J. Tribol., 114(2), pp. 328-333.
20. Branch, N. A., Arakere, N. K., Svendsen, V., and Forster, N. H., 2010, "Stress Field Evolution in a Ball Bearing Raceway Fatigue Spall," J. ASTM Int., 7(2), pp. 1-18.
21. Boto, P. A., 1971, "Detection of Bearing Damage by Shock Pulse Measurement," Ball Bearing J., 167, pp. 1-7.
22. McFadden, P. D., and Smith, J. D., 1984, "Model for the Vibration Produced by a Single Point Defect in a Rolling Element Bearing," J. Sound Vib., 96(1), pp. 69-82.
23. McFadden, P. D., and Smith, J. D., 1985, "The Vibration Produced by a Multiple Point Defects in a Rolling Element Bearing," J. Sound Vib., 98(2), pp. 263-273.
24. Brie, D., 2000, "Modelling of the Spalled Rolling Element Bearing Vibration Signal: An Overview and Some New Results," Mech. Syst. Signal Process., 14(3), pp. 353-369.
25. Tandon, N., and Choudhury, A., 1997, "An Analytical Model for the Prediction of the Vibration Response of Rolling Element Bearings Due to Localized Defect," J. Sound Vib., 205(3), pp. 275-292.
26. Choudhury, A., and Tandon, N., 2006, "Vibration Response of Rolling Element Bearings in a Rotor Bearing System to a Local Defect Under Radial Load," ASME J. Tribol., 128(2), pp. 252-261.
27. Cong, F., Chen, J., Dong, G., and Pecht, M., 2013, "Vibration Model of Rolling Element Bearings in a Rotor-Bearing System for Fault Diagnosis," J. Sound Vib., 332(8), pp. 2081-2097.
28. Zhang, C., Qiu, J., Kurfess, T. R., Danyluk, S., and Liang, S. Y., 2000, "Impact Dynamics Modeling of Bearing Vibration for Defect Size Estimation," Int. J. COMADEM, 3(3), pp. 37-42.
29. Kiral, Z., and Karagulle, H., 2003, "Simulation and Analysis of Vibration Signals Generated by Rolling Element Bearing With Defects," Tribol. Int., 36(9), pp. 667-678.
30. Kiral, Z., and Karagulle, H., 2006, "Vibration Analysis of Rolling Element Bearings With Various Defects Under the Action of an Unbalanced Force," Mech. Syst. Signal Process., 20(8), pp. 1967-1991.
31. Sassi, S., Badri, B., and Thomas, M., 2007, "A Numerical Model to Predict Damaged Bearing Vibrations," J. Vib. Control, 13(11), pp. 1603-1628.
32. Liu, J., Shao, Y., and Lim, T. C., 2014, "Impulse Vibration Transmissibility Characteristics in the Presence of Localized Surface Defects in Deep Groove Ball Bearing Systems," Proc. Inst. Mech. Eng., Part K, 228(1), pp. 62-81.
33. Sopanen, J., and Mikkola, A., 2003, "Dynamic Model of a Deep-Groove Ball Bearing Including Localized and Distributed Defects-Part 1: Theory," Proc. Inst. Mech. Eng., Part K, 217(3), pp. 201-211.
34. Sopanen, J., and Mikkola, A., 2003, "Dynamic Model of a Deep-Groove Ball Bearing Including Localized and Distributed Defects-Part 2: Implementation and Results," Proc. Inst. Mech. Eng., Part K, 217(3), pp. 213-233.
35. Cao, M., and Xiao, J., 2008, "A Comprehensive Dynamic Model of Double- Row Spherical Roller Bearing-Modeling Development and Case Studies on Surface Defects, Preloads, and Radial Clearances," Mech. Syst. Signal Process., 22(2), pp. 467-489.
36. Rafsanjani, A., Abbasion, S., Farshidianfar, A., and Moeenfard, H., 2009, "Nonlinear Dynamic Modeling of Surface Defects in Rolling Element Bearings," J. Sound Vib., 319(3-5), pp. 1150-1174.
37. Patel, V. N., Tandon, N., and Pandey, R. K., 2010, "A Dynamic Model for Vibration Studies of Deep Groove Ball Bearings Considering Single and Multiple Defects in Races," ASME J. Tribol., 132(4), p. 041101.
38. Yuan, X., Zhu, Y.-S., and Zhang, Y.-Y., 2014, "Multi-Body Vibration Modelling of Ball Bearing-Rotor System Considering Single and Compound Multi-Defects," Proc. Inst. Mech. Eng., Part K, 228(2), pp. 199-212.
39. Patil, M. S., Mathew, J., Rajendrakumar, P. K., and Desai, S., 2010, "A Theoretical Model to Predict the Effect of Localized Defect on Vibrations Associated With Ball Bearings," Int. J. Mech. Sci., 52(9), pp. 1193-1201.
40. Tadina, M., and Boltezar, M., 2011, "Improved Model of a Ball Bearing for the Simulation of Vibration Signals Due to Faults During Run-Up," J. Sound Vib., 330(17), pp. 4287-4301.
41. Liu, J., Shao, Y., and Lim, T. C., 2012, "Vibration Analysis of Ball Bearings With a Localized Defect Applying Piecewise Response Function," Mech. Mach. Theory, 56, pp. 156-169.
42. Marin, J., Rubio, H., Garcia-Prada, J. C., and Reinoso, O., 2014, "Modeling and Simulation of 5 and 11 DOF Ball Bearing System With Localized Defect," J. Test. Eval., 42(1), pp. 34-49.
43. Antoni, J., and Randall, R. B., 2003, "A Stochastic Model for Simulation and Diagnostics of Rolling Element Bearings With Localized Faults," ASME J. Vib. Acoust., 125(3), pp. 282-289.
44. Behzad, M., Bastami, A. R., and Mba, D., 2011, "A New Model for Estimating Vibrations Generated in the Defective Rolling Element Bearings," ASME J. Vib. Acoust., 133(4), p. 041011.
45. Ashtekar, A., Sadeghi, F., and Stacke, L. E., 2008, "A New Approach to Modeling Surface Defects in Bearing Dynamics Simulations," ASME J. Tribol., 130(4), p. 041103.
46. Ashtekar, A., Sadeghi, F., and Stacke, L. E., 2010, "Surface Defects Effects on Bearing Dynamics," Proc. Inst. Mech. Eng., Part J, 224(1), pp. 25-35.
47. Doguer, T., Strackeljan, J., and Tkachuk, P., 2009, "Using a Dynamic Roller Bearing Model Under Varying Fault Parameters," 6th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, pp. 907-918.
48. Liu, J., Shao, Y., and Zuo, M. J., 2013, "The Effects of the Shape of Localized Defect in Ball Bearings on the Vibration Waveform," Proc. Inst. Mech. Eng., Part K, 227(3), pp. 261-274.
49. Epps, I. K., 1991, "An Investigation into Vibrations Excited by Discrete Faults in Rolling Element Bearings," Ph.D. thesis, University of Canterbury, Upper Riccarton, Christchurch.
50. Sawalhi, N., Randall, R. B., and Endo, H., 2007, "The Enhancement of Fault Detection and Diagnosis in Rolling Element Bearings Using Minimum Entropy Deconvolution Combined With Spectral Kurtosis," Mech. Syst. Signal Process., 21(6), pp. 2616-2633.
51. Sawalhi, N., and Randall, R. B., 2011, "Vibration Response of Spalled Rolling Element Bearings: Observations, Simulations, and Signal Processing Techniques to Track the Spall Size," Mech. Syst. Signal Process., 25(3), pp. 846-870.
52. Nakhaeinejad, M., and Bryant, M. D., 2011, "Dynamic Modeling of Rolling Element Bearings With Surface Contact Defects Using Bond Graphs," ASME J. Tribol., 133(1), p. 011102.
53. Singh, S., Kopke, U. G., Howard, C. Q., Petersen, D., and Rennison, D., 2013, "Impact Generating Mechanisms in Damaged Rolling Element Bearings," Acoustics,Victor Harbor, Australia, pp. 1-7.
54. Singh, S., Kopke, U. G., Howard, C. Q., and Petersen, D., 2014, "Analyses of Contact Forces and Vibration Response for a Defective Rolling Element Bearing Using an Explicit Dynamics Finite Element Model," J. Sound Vib., 333(21), pp. 5356-5377.
55. Khanam, S., Tandon, N., and Dutt, J. K., 2014, "Force Analysis Due to Local Defect in Rolling Bearings for Fault Diagnosis," 9th IFToMM International Conference on Rotor Dynamics, Milan, Italy, Sept. 22-25, Mechanisms and Machine Science, Vol. 21, Springer, pp. 577-586.
56. Shao, Y., Liu, J., and Ye, J., 2014, "A New Method to Model a Localized Surface Defect in a Cylindrical Roller-Bearing Dynamic Simulation," Proc. Inst. Mech. Eng., Part J, 228(2), pp. 140-159.
57. Niu, L., Cao, H., He, Z., and Li, Y., 2014, "Dynamic Modeling and Vibration Response Simulation for High Speed Rolling Ball Bearings With Localized Surface Defects in Raceways," ASME J. Manuf. Sci. Eng., 136(4), p. 041015.
58. Zhao, S., Liang, L., Xu, G., Wang, J., and Zhang, W., 2013, "Quantitative Diagnosis of a Spall-Like Fault of a Rolling Element Bearing by Empirical Mode Decomposition and the Approximate Entropy Method," Mech. Syst. Signal Process., 40(1), pp. 154-177.
59. Jena, D. P., Singh, M., and Kumar, R., 2012, "Radial Ball Bearing Inner Race Defect Width Measurement Using Analytical Wavelet Transform of Acoustic and Vibration Signal," Meas. Sci. Rev., 12(4), pp. 141-148.
60. Kumar, R., and Singh, M., 2013, "Outer Race Defect Width Measurement in Taper Roller Bearing Using Discrete Wavelet Transform of Vibration Signal," Measurement, 46(1), pp. 537-545.
61. Khanam, S., Tandon, N., and Dutt, J. K., 2014, "Fault Size Estimation in the Outer Race of Ball Bearing Using Discrete Wavelet Transform of the Vibration Signal," Procedia Technol., 14, pp. 12-19.
62. Desavale, R. G., Venkatachalam, R., and Chavan, S. P., 2013, "Antifriction Bearings Damage Analysis Using Experimental Data Based Models," ASME J. Tribol., 135(4), p. 041105.
63. Holm-Hansen, B. T., and Gao, R. X., 2000, "Vibration Analysis of a Sensor-Integrated Ball Bearing," ASME J. Vib. Acoust., 122(4), pp. 384-392.
64. Slavic, J., Brkovic, A., and Boltezar, M., 2011, "Typical Bearing-Fault Rating Using Force Measurements: Application to Real Data," J. Vib. Control, 17(14), pp. 2164-2174.
65. Hertz, H., 1881, "On the Contact of Elastic Solids," J. Reine Angew. Math., 92, pp. 156-171.
66. Dareing, D. W., and Johnson, K. L., 1975, "Fluid Film Damping of Rolling Contact Vibrations," J. Mech. Eng. Sci., 17(4), pp. 214-218.
67. Mehdigoli, H., Rahnejat, H., and Gohar, R., 1990, "Vibration Response of Wavy Surfaced Disc in Elastohydrodynamic Rolling Contact," Wear, 139(1), pp. 1-15.
68. Stachowiak, G. W., and Batchelor, A. W., 2005, Engineering Tribology, 3rd ed., Elsevier Butterworth-Heinemann, Oxford, UK.
69. Harris, T. A., 2001, Rolling Bearing Analysis, 4th ed., Wiley, New York.
70. Stronge, W. J., 2000, Impact Mechanics, 1st ed., Cambridge University Press, Cambridge, UK.
71. Krämer, E., 1993, Dynamics of Rotors and Foundations, Springer-Verlag, Berlin.
72. Genta, G., 2004, "On a Persistent Misunderstanding of the Role of Hysteretic Damping in Rotor Dynamics," ASME J. Vib. Acoust., 126(3), pp. 459-461.