Impulse vibration transmissibility characteristics in the presence of localized surface defects in deep groove ball bearing systems

Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics

Volumn 228, Issue 1, 2014, Pages 62-81

  Liu, Jing ^a   Shao, Yimin ^a   Lim, Teik C ^b  

^a CHONGQING UNIVERSITY   (China)

^b 705 Engineering Research Center   (United States)

Author keywords

Ball bearing dynamics; Bearing defects; Bearing support compliance; Vibration transmission characteristics

Indexed keywords

BEARING DEFECT; BEARING DYNAMICS; BEARING SUPPORT; BEARING VIBRATIONS; EXPERIMENTAL INVESTIGATIONS; MONITORING AND DIAGNOSTICS; VIBRATION TRANSMISSIBILITY; VIBRATION TRANSMISSION;

CONDITION MONITORING; DEEP GROOVE BALL BEARINGS; DEFECTS; STIFFNESS; SURFACE DEFECTS;

HOUSING;

EID: 84896766856     PISSN: 14644193     EISSN: 20413068     Source Type: Journal    
DOI: 10.1177/1464419313514572     Document Type: Article

References (51)

1. Patel VN, Tandon N and Pandey RK. A dynamic model for vibration studies of deep groove ball bearings considering single and multiple defects in races. ASME J Tribol 2010; 132(4): 041101.
2. Choudhury A and Tandon N. Vibration response of rolling element bearings in a rotor bearing system to a local defect under radial load. ASME J Tribol 2006; 128: 252-261.
3. Rafsanjani A, Abbasion S, Farshidianfa A, et al. Nonlinear dynamic modeling of surface defects in rolling element bearing systems. J Sound Vib 2009; 319: 1150-1174.
4. Tandon N and Choudhury A. A review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings. Tribol Int 1999; 32: 469-480.
5. Xiao HF, Shao YM and Mechefske CK. Transmission of vibration and energy through layered and jointed plates subjected to shock excitation. Proc IMechE, Part C: J Mechanical Engineering Science 2012; 22(7): 1765-1777.
6. Wardle FP. Vibration forces produced by waviness of the rolling surfaces of thrust loaded ball bearings part 2: Experimental validation. Proc IMechE, Part C: J Mechanical Engineering Science 1988; 202(5): 313-319.
7. Meyer LD, Weichbrodt B and Ahlgren FF. An analytic model for ball bearing vibrations to predict vibration response to distributed defects. ASME J Mech Design 1980; 102(2): 205-210.
8. Lynagh N, Rahnejat H, Erahimi M, et al. Bearing induced vibration in precision high speed routing spindle. Int J Mach Tool Manu 2000; 40(4): 561-577.
9. Jack LB and Nandi AK. Support vector machines for detection and characterization of rolling element bearing faults. Proc IMechE, Part C: J Mechanical Engineering Science 2001; 215: 1065-1074.
10. Ocak H and Loparo KA. Estimation of the running speed and bearing defect frequencies of an induction motor from vibration data. Mech Syst Signal Pr 2004; 18: 515-533.
11. Purushotham V, Narayanan S and Prasad SAN. Multifault diagnosis of rolling bearing elements using wavelet analysis and hidden Markov model based fault recognition. NDT&E Int 2005; 38(8): 654-664.
12. Shao YM and Nezu K. Design of mixture de-noising for detecting faulty bearing signals. J Sound Vib 2005; 282: 899-917.
13. Jayaswal P, Verma SN and Wadhwani AK. Development of EBP-artificial neural network expert system for rolling element bearing fault diagnosis. J Vib Control 2010; 17(8): 1131-1148.
14. McFadden PD and Smith JD. Model for the vibration produced by a single point defect in a rolling element bearing. J Sound Vib 1984; 96(1): 69-82.
15. McFadden PD and Smith JD. The vibration produced by multiple point defects in a rolling element bearing. J Sound Vib 1985; 98(2): 263-273.
16. Sopanen J and Mikola A. Dynamic model of a deepgroove ball bearing including localized and distributed defects - part 1: Theory. Proc IMechE, Part K: J Multibody Dynamics 2003; 217: 201-211.
17. Sopanen J and Mikola A. Dynamic model of a deepgroove ball bearing including localized and distributed defects - part 2: Implementation and results. Proc IMechE, Part K: J Multi-body Dynamics 2003; 217: 213-223.
18. Sassi S, Badri B and Thomas M. A numerical model to predict damaged bearing vibrations. J Vib Control 2007; 13(11): 1603-1628.
19. Ashtekar A, Sadeghi F and Stacke LE. A new approach to modeling surface defects in bearing dynamics simulations. ASME J Tribol 2008; 130(4): 041103.
20. Ashtekar A, Sadeghi F and Stacke LE. Surface defects effects on bearing dynamics. Proc IMechE, Part J: J Engineering Tribology 2010; 224: 25-35.
21. Nakhaeinejad M and Bryant MD. Dynamic modeling of rolling element bearings with surface contact defects using bond graphs. ASME J Tribol 2011; 133(1): 011102.
22. Tadina M and Boltezar M. Improved model of a ball bearing for the simulation of vibration signal due to faults during run-up. J Sound Vib 2011; 330: 4287-4301.
23. Behzad M, Bastami AR and Mba D. A new model for estimating vibrations generated in defective rolling element bearings. ASME J Vib Acoust 2011; 133(4): 041011.
24. Tandon N and Choudhury A. An analytical model for the prediction of the vibration response of rolling element bearing due to a localized defect. J Sound Vib 1997; 205(3): 275-292.
25. Kiral Z and Karagulle H. Simulation and analysis of vibration signals generated by rolling element bearing with defects. J Sound Vib 2003; 36: 667-678.
26. Cao M and Xiao J. A comprehensive dynamic model of double-row spherical roller bearing-modeling development and case studies on surface defects, preloads, and radial clearance. Mech Syst Signal Process 2007; 22: 467-489.
27. Patil MS, Mathew J, Rajendrakumar PK, et al. A theoretical model to predict the effect of the localized defect on vibrations associated with ball bearing. Int J Mech Sci 2010; 52: 1193-1201.
28. Arslan H and Aktürk N. An investigation of rolling element vibrations caused by local defects. ASME J Tribol 2008; 130(4): 041101.
29. Liu J, Shao YM and Lim TC. Vibration analysis of ball bearings with a localized defect applying piecewise response function. Mech Mach Theory 2012; 56: 156-169.
30. Liu J, Shao YM and Ming JZ. The effects of the shape of localized defect in ball bearings on the vibration waveform. Proc IMechE, Part K: J Multi-body Dynamics 2013; DOI: 10.1177/1464419313486102.
31. White MF. Rolling element bearing vibration transfer characteristics: Effect of stiffness. ASME J Appl Mech 1976; 46: 677-684.
32. Lim TC and Singh R. Vibration transmission through rolling element bearings, Part II: system studies. J Sound Vib 1990; 139(2): 201-225.
33. Kraus J, Blech JJ and Braun SG. In situ determination of rolling bearing stiffness and damping by model analysis. J Vib Acoust 1987; 109: 235-240.
34. David FP. Vibration transmission through bearings with application to gearboxes. NASA report TM- 2007-214954, 2007.
35. Rahnejat H and Gohar R. The vibrations of radial ball bearings. Proc IMechE, Part C: J Mechanical Engineering Science 1985; 199(3): 181-193.
36. Aini R, Rahnejat H and Gohar R. An experimental investigation into bearing-induced spindle vibration. Proc IMechE, Part C: J Mechanical Engineering Science 1995; 209(2): 107-114.
37. Gao Y, Li ZM, Wang JW, et al. Influences of bearing housing deflection on vibration performance of cylinder roller bearing-rotor system. Proc IMechE, Part K: J Multi-body Dynamics 2013; 227(2): 106-114.
38. Gupta PK. Dynamic of rolling-element bearings part III Ball bearing analysis. ASME J Lubr Technol 1979; 101(3): 312-318.
39. Gupta PK. Dynamic of rolling-element bearings part IV: Ball bearing results [J]. ASME J Lubr Technol 1979; 101(3): 319-326.
40. Matsubara M, Rahnejat H and Gohar R. Computational modelling of precision spindles supported by ball bearings. Int J Mach Tool D R 1988; 28(4): 429-442.
41. Aini R, Rahnejat H and Gohar R. A five degrees of freedom analysis of vibration in precision spindles. Int J Mach Tool Manu 1990; 30(1): 1-18.
42. Mehdigoli H, Rahnejat H and Gohar R. Vibrations response of wavy surfaced disc in elastohydrodynamic rolling contact. Wear 1990; 139: 1-15.
43. Li J and Wang LQ. Finite element analysis of 1.5 MW windpower gearbox housing. Acta Energ Solaris Sin 2008; 29(11): 1438-1443.
44. Shi L, Wang YY, Jiang JD, Zhao ZF and Zhang X. Finite element modal analysis and improved design of gear box case in agricultural machinery. Journal of Zhejiang University of Technology 2010; 38(9): 229-232.
45. Li CS and Huang DB. Metal material handbook. Beijing: Chemical Industry Press, 2005.
46. ANSYS Theory Reference. ANSYS Release 11.0, ANSYS, Inc., 2007.
47. Xu BY. Elastic and plastic mechanics. Beijing: China Machine Press, 2003.
48. Dormand JR and Prince PJ. A family of embedded Runge-Kutta formulae. Journal of Computational and Applied Mathematics 1980; 6(1): 19-26.
49. Genta G. On a persistent misunderstanding of the role of hysteretic damping in rotor dynamics. ASME J Vib Acoust 2004; 126: 459-461.
50. Harris TA and Kotzalas MN. Rolling bearing analysis - essential concepts of bearing technology. 5th ed. New York: Taylor and Francis, 2007.
51. Smith JD. Transmission of smith shocks through rolling bearings. J Sound Vib 1995; 181(1): 1-6.