Antifriction bearings damage analysis using experimental data based models

Journal of Tribology

Volumn 135, Issue 4, 2013, Pages

  Desavale, R G ^a   Venkatachalam, R ^a   Chavan, S P ^b  

^a NATIONAL INSTITUTE OF TECHNOLOGY   (India)

^b WALCHAND COLLEGE OF ENGINEERING   (India)

Author keywords

Antifriction bearings; Buckingham theorem; Condition based maintenance; Defects; Dimensional analysis; Experimental data based models; FFT analyzer

Indexed keywords

DEFECTS; MAINTENANCE;

BUCKINGHAM THEOREM; CONDITION BASED MAINTENANCE; DATA BASED MODEL; DIMENSIONAL ANALYSIS; FFT ANALYZERS;

ANTIFRICTION BEARINGS;

EID: 84903689727     PISSN: 07424787     EISSN: 15288897     Source Type: Journal    
DOI: 10.1115/1.4024638     Document Type: Article

References (52)

1. Massimo, C., and Alberto, I., 2002, "Analysis of Damage Bearings of Aeronautical Transmission by Auto-Power Spectrum and Cross-Power Spectrum," ASME, J. Vibr. Acoust., 124, pp. 180-185.
2. Sebastian, V., Henning, Z., and Mario, P., 2007, "Rolling Bearing Condition Monitoring Based on Frequency Response Analysis," Diagnostics for Electric Machines, Power Electronics and Drives, IEEE International Symposium, pp. 29-35.
3. Tandan, N., Yadava, G. S., and Ramakrishna, K. M., 2007, "A Comparison of Some Condition Monitoring Techniques for the Detection of Defect in Induction Motor Ball Bearing," Mech. Syst. Signal Process., 21, pp. 244-256. (Pubitemid 44528222)
4. Langhaar, H. L., 1951, Dimensional Analysis and Theory of Models, Wiley, New York.
5. Patel, V. N., Tandan, N., and Pandey, R. K., 2010, "A Dynamic Model for Vibration Studies of Deep Groove Ball Bearings Considering Single and Multiple Defects in Races," ASME J. Tribol., 132, p. 041101.
6. Patil, M. S., Mathew, J., and Desai, S., 2010, "A Theoretical Model to Predict the Effect of Localized Defect on Vibrations Associated With Ball Bearings," Int. J. Mech. Sci., 52, pp. 1193-1201.
7. Shuang, L. V., 2007, "Rolling Bearings Fault Diagnosis Based on Wavelet-Neural Network," IEEE International Technology and Innovation Conference, pp. 1884-1887.
8. Arslan, H., and Akturk, N., 2008, "An Investigation of Rolling Element Vibrations Caused by Local Defects," Trans. ASME, J. Tribol., 130, p. 041101.
9. Roque, A. A., Silva, T. A. N., and Dias, J. C. Q., 2009, "An Approach to Fault Diagnosis of Rolling Bearings," WSEAS transactions on systems and control, Issue 4, 4, ISSN: 1991-8763, pp. 188-197.
10. Choy, F. K., Zhou, J., and Braun, M. J., 2005, "Vibration Monitoring and Damage Quantification of Faulty Ball Bearings," Trans. ASME, J. Tribol., 127, pp. 776-783. (Pubitemid 41542106)
11. Tandan, N., and Choudhury, A., 1999, "A Review of the Vibration and Acoustic Measurement Methods for Detection of Defects in Rolling Element Bearings," Tribol. Int., 32(8), pp. 469-480. (Pubitemid 30550533)
12. Nakhaeinejad, M., Michael, M. D., 2011, "Dynamic Modeling of Rolling Element Bearings With Surface Contact Defects Using Bond Graphs," Trans. ASME, J. Tribol., 133, p. 011102.
13. Soylemezoglu, A., Jagannathan, S., and Can, S., 2010, "Mahalanobis-Taguchi System (MTS) as a Prognostics Tool For Rolling Element Bearing Failures," Trans. ASME, J. Manufacturing Sci. Eng., 132(5), p. 051014.
14. Wang, W. J., Wu, Z. T., and Chen, J., 2001, "Fault Identification in Rotating Machinery Using The Correlation Dimension and Bispectra," Nonlinear Dyn., 25, pp. 383-393. (Pubitemid 34061016)
15. Wei, H., and Xiang, Z., 2009, "Application of the Wavelet-SOFM Network in Roll Bearing Defect Diagnosis," IEEE, Computer Society, Global Congress on Intelligent Systems, pp. 8-12.
16. Ihab, S., Ip-Shing, F., and Perinpanayagam, S., 2010, "Fault Diagnosis Of Rolling Element Bearings Using An EMRAN RBF Neural Network-Demonstrated Using Real Experimental Data," IEEE Sixth International Conference on Natural Computation (ICNC 2010), pp. 287-291.
17. Huaqing, W., and Chen, P., 2011, "Intelligent Diagnosis Method For Rolling Element Bearing Faults Using Possibility Theory And Neural Network," IEEE Trans. Comput. Ind. Eng., 60(4), pp. 511-518.
18. Czeslaw, T., and Kowalski, T. O. K., 2003, "Neural Networks Application For Induction Motor Faults Diagnosis," Math. Comput. Simul., 63, pp. 435-448.
19. Hoffman, A. J., and Merwe, N. T., 2002, "The Application of Neural Networks To Vibrational Diagnostics For Multiple Fault Conditions," Comput. Stand. Interfaces, 24, pp. 139-149. (Pubitemid 34524854)
20. Chun-Chieh, W., and Yuan Kang, P. C. S., 2010, "Applications of Fault Diagnosis In Rotating Machinery By Using Time Series Analysis With Neural Network," Expert Systems With Applications, 37, pp. 1696-1702.
21. Yuh-Tay, S., 2009, "On the Study of Applying Morlet Wavelet to the Hilbert Transform for the Envelope Detection of Bearing Vibrations," Mech. Syst. Signal Processing, 23, pp. 1518-1527.
22. Sugumaran, K. I., and Ramchandra, K. I., 2011, "Fault Diagnosis of Roller Bearing Using Fuzzy Classifier and Histogram Features With Focus on Automatic Rule Learning," Expert Systems With Applications, 38, pp. 4901-4907.
23. Prabhakar, S., Mohanty, A. R., and Sekhar, A. S., 2002, "Application of Discrete Wavelet Transform For Detection of Ball Bearing Race Faults," Tribol. Int., 35, pp. 793-800. (Pubitemid 35282111)
24. Kunpeng, Z., Wong, Y. S., and Hong, G. S., 2009, "Wavelet Analysis of Sensor Signals For Tool Condition Monitoring: A Review and Some New Results," Int. J. Machine Tools & Manufacture, 49, pp. 537-553.
25. Singh, G. K., and Ahmed, S. Al. K., 2009, "Isolation and Identification of Dry Bearing Faults In Induction Machine Using Wavelet Transform," Tribol. Int., 42, pp. 849-861.
26. Ghafari, S. H., and Golnaraghi, F. I., 2008, "Effect of Localized Faults on Chaotic Vibration of Rolling Element Bearings," Nonlinear Dyn., 53, pp. 287-301.
27. Tao, B., Limin, Z., and Han, D., 2007, "An Alternative Time-Domain Index for Condition Monitoring of Rolling Element Bearings-A Comparison Study," Reliab. Eng. Syst. Safety, 92, pp. 660-670. (Pubitemid 46108535)
28. Mevel, B., and Guyader, J. L., 1993, "Routes to Chaos in Ball Bearing," J. Sound Vib., 162(3), pp. 471-487.
29. Chongsheng, L., and Liangsheng, Q., 2007, "Application of Chaotic Oscillator in Machinery Fault Diagnosis," Mech. Syst. Signal Processing, 21, pp. 257-269.
30. Shengping, F., Changle, X., and Jingyan, W., 2009, "Numerical Calculation of Ball Bearing Excitation and Application in Multi-Body Dynamics Simulation," Computer-Aided Industrial Design and Conceptual Design, IEEE 10th International Conference, pp. 596-600.
31. McFadden, P. D., and Smith, J. D., 1984, "Model for the Vibration Produced by a Single Point Defect in a Rolling Element Bearing," J. Sound Vib., 96(1), pp. 69-82. (Pubitemid 15421328)
32. McFadden, P. D., and Smith, J. D., 1985, "Model for the Vibration Produced by a Multiple Point Defect in a Rolling Element Bearing," J. Sound Vib.,98(2), pp. 263-273.
33. Meyer, L. D., Ahlgren, F. F., and Weichbrodt, B., 1980, "An Analytical Model for Ball Bearing Vibrations to Predict Vibration Response to Distributed Defects," ASME J. Mech. Design Trans., 102, pp. 205-210. (Pubitemid 11456029)
34. Tandan, N., and Choudhury, A., 1997, "An Analytical Model for the Prediction of the Vibration Response of Rolling Element Bearings Due to a Localized Defects," J. Sound Vib., 205(3), pp. 275-292. (Pubitemid 127402793)
35. Zeki, K., and Hira, K., 2006, "Vibration Analysis of Rolling Element Bearing With Various Defects Under the Action of an Unbalanced Force," Mech. Syst. Signal Process., 20, pp. 1967-1991.
36. Przemyslaw, S., and Tomasz, K., 2005, "A Model for the Determination of the Resisting Torque of the Rolling Bearing Cage Motion of Slow-Speed Kinematic Pairs," Meccanica, 40, pp. 35-47.
37. Prasad, H., 2002, "Relative Comparison of Stiffness and Damping Properties of Double Decker High Precision and Conventional Rolling-Element Bearings," Tribol. Int., 35, pp. 265-269.
38. Bin, W., and Minjie, W., 2007, "An Approach of Bearing Fault Detection and Diagnosis at Varying Rotating Speed," IEEE International Conference on Control and Automation, pp. 1634-1637.
39. Upadhyay, S. H., Harsha, S. P., and Jain, S. C., 2008, "Nonlinear Vibration Signature Analysis of High Speed Rotor Due To Defects Of Rolling Element," Adv. Theor. Appl. Mech., 1(7), pp. 301-314. Available at: http://m-hikari.com/atam/atam2008/atam5-8-2008/upadhyayATAM5-8-2008.pdf
40. Purohit, R. K., and Purohit, K., 2006, "Dynamic Analysis of Ball Bearings With Effect of Preload and Number of Balls," Int. J. Appl. Mech. Eng., 11(1), pp. 77-91. Available at: http://www.ijame.uz.zgora.pl/ijame-files/ archives/v11PDF/n1/77-91-Article-05.pdf
41. Wentao, S., and Zhang, D., 2011, "Research on Envelope Analysis for Bearings Fault Detection," 5th International Conference on Computer Science and Education, Hefei, China, August 24-27, pp. 973-976.
42. Fidel, E. H., and Oscar, C. M., 2008, "The Application of Bispectrum on Diagnosis of Rolling Element Bearing: A Theoretical Approach," Mech. Syst. Signal Process., 22, pp. 588-596.
43. Zubrenkov, B. I., and Sen'kina, V. V., 2010, "Modal Analysis of the Structure of Rotating Machines With Roller Bearings," ISSN 1068-798X, Russian Engineering Research, 30(5), pp. 442-445.
44. Harris, T. A., 2001, Rolling Bearing Analysis, 4th ed., Wiley-Interscience, New York, NY.
45. Eschmann, P., 1985, Ball and Roller Bearings-Theory, Design, and Application, Wiley, New York.
46. Gupta, P. K., 1984, Advanced Dynamics of Rolling Elements, Springer-Verlag, New York.
47. Changsen, W., 1991, Analysis of Rolling Element Bearings, Mechanical Engineering Publications Ltd., London.
48. Rao, J. S., 2000, Vibratory Condition Monitoring of Machines, Narosa, New Delhi.
49. Hamrock, B. J., 1994, Fundamentals of Fluid Film Lubrication, Mechanical Engineering Series, McGraw-Hill Editions, Singapore.
50. Ragulskis, K., and Yurkauskas, A., 1989, Vibrations of Bearings, Applications of Vibration Series, Hemisphere Publishing Corporation, New York.
51. Taylor, J. I., 1994, The Vibration Analysis Handbook, Vibrations Consultants Inc., 360 pages.
52. Harris, T., and Kotzalas, M., 2007, Essential Concepts of Bearing Technology, Taylor & Francis, Boca Raton, FL.