The Importance of Corrosion and the Necessity of Applying Intelligent Coatings for Its Control

Intelligent Coatings for Corrosion Control

Volumn , Issue , 2015, Pages 17-58

  Gurrappa, I ^a   Yashwanth, I V S ^a  

^a DEFENCE METALLURGICAL RESEARCH LABORATORY   (India)

Author keywords

Cathodic protection; Corrosion; Intelligent coating; Superalloys

Indexed keywords

CATHODIC PROTECTION; CORROSION; HIGH TEMPERATURE CORROSION; INORGANIC COATINGS; LOSSES; SUPERALLOYS;

ECONOMICALLY VIABLE; ELEVATED TEMPERATURE; ENVIRONMENTAL CONDITIONS; FINANCIAL LOSS; HOT CORROSION; MATERIALS SCIENTIST; NATURAL PHENOMENA; PREPARATION TECHNIQUE;

CORROSION RESISTANT COATINGS;

EID: 84942584958     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-12-411467-8.00002-7     Document Type: Chapter

References (57)

1. Gurrappa I., Yashwanth I.V.S., Gogia A.K., et al. The significance of corrosion in titanium based alloys for industrial applications. Titanium alloys: formation, characteristics and applications 2013, Nova Publishers, USA. L.C. Zhang, C. Yang (Eds.).
2. Radhakrishnan S., Sonawane N., Siju C.R. Epoxy powder coatings containing polyaniline for enhanced corrosion protection. Prog Org Coat 2009, 64:383-386.
3. Yan M., Vetter C.A., Gelling V.J. Corrosion inhibition performance of polypyrrole Al flake composite coatings for Al alloys. Corr Sci 2013, 70:37-45.
4. Sanchez C., Julián B., Belleville P., et al. Applications of hybrid organic-inorganic nanocomposites. J Mater Chem 2005, 15:3559-3592.
5. Tiwari A., Hihara L.H. Effect of inorganic constituent on nanomechanical and tribological properties of polymer, quasi-ceramic and hybrid coatings. Surf Coat Technol 2012, 206:4606-4618.
6. Tiwari A., Zhu J., Hihara L.H. The development of low-temperature hardening silicone ceramer coatings for the corrosion protection of metals. Surf Coat Technol 2008, 202:4620-4635.
7. Surface treatment with Aquence. http://www.durr.com.
8. Kumar A., Stephenson L.D., Murray J.N. Self-healing coatings for steel. Prog Org Coat 2006, 55:244-253.
9. Mehta N.K., Bogere M.N. Environmental studies of smart/self-healing coating system for steel. Prog Org Coat 2009, 64:419-428.
10. Koene B.E., Own S.H., Selde K. Self healing coatings for corrosion control 2007, 1-6.
11. Shulkin A., Stöver H.D.H. Polymer microcapsules by interfacial polyaddition between styrene-maleic anhydride copolymers and amines. J Membr Sci 2002, 209:421-432.
12. Li C.Y., Liaw S.C., Lai V.M.F., et al. Xanthan gum-gelatin complexes. Eur Polym J 2002, 38:1377-1381.
13. Brown E.N., Kessler M.R., Sottos N.R., et al. In situ poly(urea-formaldehyde) microencapsulation of dicyclopentadiene. J Microencapsul 2003, 20:719-730.
14. Samadzadeh M., Hatami Boura S., Peikari M., et al. A review on self-healing coatings based on micro/nanocapsules. Prog Org Coat 2010, 68:159-164.
15. Hamdy A., Doench I., Möhwald H. Intelligent self-healing corrosion resistant vanadia coating for AA2024. Thin Solid Films 2011, 520:1668-1678.
16. Kendig M., Hon M., Warren L. 'Smart' corrosion inhibiting coatings. Prog Org Coat 2003, 47:183-189.
17. Su F., Liu C., Huang P. Characterizations of nanocrystalline Co and Co/MWCNT coatings produced by different electrodeposition techniques. Surf Coat Technol 2013, 217:94-104.
18. Augustyniak A., Ming W. Early detection of aluminium corrosion via "turn-on" fluorescence in smart coatings. Prog Org Coat 2011, 71:406-412.
19. Gurrappa I., Karnik J.A. Physical and computer modelling for ship's impressed current cathodic protection (ICCP) systems. Corr Prev Control 1994, 41:40-45.
20. Gurrappa I., Karnik J.A. Physical scale modelling for cathodic protection of ships. Corr Prev Control 1995, 42:43-47.
21. Gurrappa I., Karnik J.A. Development of aluminium alloy anodes for cathodic protection of ships. Corr Prev Control 1996, 43:77-85.
22. Kulkarni A.G., Gurrappa I. Effect of magnesium addition on the surface free energy and anode efficiency of indium activated aluminium alloys. Brit Corr J 1993, 28:67.
23. Gurrappa I., Yashwanth I.V.S. Significance of aluminium alloys for cathodic protection technology. Aluminium alloys: preparation, properties and applications 2011, 125-142. Nova Publishers, USA. E.L. Persson (Ed.).
24. Gurrappa I. Cathodic protection of cooling water systems and selection of appropriate materials. J Mater Process Technol 2005, 166:256-263.
25. Khajavi M.R., Shariat M.H. Failure of first stage gas turbine blades. Eng Fail Anal 2004, 11:589-597.
26. 4 and NaCl environments. Oxid Met 1999, 50:353-383.
27. 4 coating. Mater Chem Phys 2002, 76:123.
28. Gurrappa I. Influence of alloying elements on hot corrosion of superalloys and coatings: necessity of smart coatings for gas turbine engines. Mater Sci Technol 2003, 19:178-185.
29. Gurrappa I., Yashwanth I.V.S., Gogia A.K. The selection of materials for marine gas turbine engines. Gas turbines 2012, 51-70. Volkov Konstantin, USA. V. Konstantin (Ed.).
30. Gurrappa I., Yashwanth I.V.S., Gogia A.K. The behaviour of superalloys in marine gas turbine engine conditions. J Surf Eng Mater Adv Technol 2011, 1:144-149.
31. Gurrappa I., Yashwanth I.V.S., Burnell-Gray J.S. Sulphidation characteristics of an advanced superalloy and comparison with other alloys intended for gas turbine use. Metal Mater Trans A 2013, 44:5270-5280. 10.1007/s11661-013-1859-8.
32. 2 environments. J Electrochem Soc 1993, 140:2857-2862.
33. Rapp R.A. Hot corrosion of materials. Pure Appl Chem 1990, 62:113-122.
34. Rapp R.A. Hot corrosion of materials: a fluxing mechanism?. Corr Sci 2002, 44:209-221.
35. Natesan K. High-temperature corrosion in coal gasification systems. Corrosion 1985, 41:646-655.
36. Eliaz N., Shemesh G., Latanision R.M. Hot corrosion in gas turbine components. Eng Fail Anal 2002, 9:31-43.
37. Gurrappa I. Effect of aluminium on hot corrosion resistance of MCrAlY based bond coatings. J Mater Sci Lett 2001, 20:2225-2229.
38. Gurrappa I. Development of MCrAlY based bond coatings for hot corrosion resistance. Surf Coat Technol 2001, 139:272-280.
39. Gurrappa I. Hot corrosion behaviour of protective coatings on CM 247 LC superalloy. Mater Manuf Process 2000, 15:761-769.
40. Gurrappa I. Overlay coatings degradation - an electrochemical approach. J Mater Sci Lett 1999, 18:1713-1721.
41. Gurrappa I. Thermal barrier coatings for hot corrosion resistance of CM 247 LC super alloy. J Mater Sci Lett 1998, 17:1267-1272.
42. Gurrappa I. Hot corrosion behaviour of Nimonic-75. J High Temp Mater Sci 1997, 38:137-144.
43. Yashwanth I.V.S., Gurrappa I., Murakami H. Oxidation behaviour of a newly developed superalloy. J Surf Engg Mater Adv Technol 2011, 1:130-135.
44. Moniruzzaman M., Murata Y., Morinaga M., et al. Prospect of Ni based super alloys with lo Cr and high Re contents. ISIJ Intern 2002, 42:1018-1125.
45. Gurrappa I. Platinum aluminide coatings for oxidation resistance of titanium alloys. Platinum Met Rev 2001, 45:124-131.
46. Gurrappa I., Gogia A.K. Development of oxidation resistant coatings for titanium alloy, IMI 834. Mater Sci Technol 2001, 17:581-587.
47. Gurrappa I. High performance coatings for titanium alloys to protect against oxidation. Surf Coat Technol 2001, 139:216-221.
48. Leyens C., Fritcher K., Peters M., et al. Transformation and oxidation of a sputtered low-expansion Ni-Cr-Al-Ti-Si bond coating for thermal barrier systems. Surf Coat Technol 1997, 94-95:155-161.
49. Brandl W., Grabke H.J., Toma D., et al. The oxidation behaviour of sprayed MCrAlY coatings. Surf Coat Technol 1996, 86-87:41-50.
50. Beele W., Czech N., Quadakkers W.J., et al. Long-term oxidation tests on a re-containing MCrAlY, coating. Surf Coat Technol 1997, 94-95:41-48.
51. Wang Q.M., Wu Y.N., Ke P.L., et al. Hot corrosion behavior of AIP NiCoCrAlY(SiB) coatings on nickel base superalloys. Surf Coat Techonol 2004, 186:389-397.
52. Kuroda S., Kawakita J., Watanabe M., et al. Warm spraying-a novel coating process based on high-velocity impact of solid particles. Sci Tech Adv Mater 2008, 9:33002.
53. Gurrappa I, Yashwanth IVS, Murakami H, Kuroda S. The importance of hot corrosion and its effective prevention for enhanced efficiency of gas turbines, In: Gurrappa I, editor. Gas Turbines. USA: INTECH Publishers (In press).
54. Kawagishi K., Sato A., Harada H. A concept for the EQ coating system for nickel-based superalloys. JOM 2008, 60:31-35. http://www.tms.org/jom.html.
55. Nicholls J.R., Simms N.J., Chan W.Y., et al. Smart overlay coatings - concept and practice. Surf Coat Technol 2001, 149:236-244.
56. Gurrappa I. Identification of a smart bond coating for gas turbine engine applications. J Coat Technol Res 2008, 5:385-391.
57. Gurrappa I. Design and development of smart coatings for aerospace applications. Final report, European Commission; July 2008.