Effect of graphene oxide treatment on the properties of cellulose nanofibril films made of banana petiole fibers

BioResources

Volumn 10, Issue 2, 2015, Pages 2809-2822

  Xu, Changyan ^a   Wang, Guangjing ^a   Xing, Cheng ^b   Matuana, Laurent M ^b   Zhou, Handong ^a  

^a NANJING FORESTRY UNIVERSITY   (China)

^b Michigan State University   (United States)

Author keywords

Cellulose nanofibril film (CNF); Graphene oxide; Tensile properties; Thermal properties

Indexed keywords

CELLULOSE; CELLULOSE FILMS; DYNAMIC MECHANICAL ANALYSIS; DYNAMICS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; FRUITS; NANOFIBERS; OXIDE FILMS; SCANNING ELECTRON MICROSCOPY; TENSILE PROPERTIES; TENSILE STRENGTH; THERMODYNAMIC PROPERTIES; THERMODYNAMIC STABILITY; THERMOGRAVIMETRIC ANALYSIS;

CELLULOSE MATRIX; DYNAMIC MECHANICAL ANALYSIS (DMA); DYNAMIC MECHANICAL PROPERTY; GRAPHENE OXIDES; NANOFIBRIL; NEW APPROACHES; RETENTION RATIO; STRONG COUPLING;

GRAPHENE;

CELLULOSE; GRAVIMETRY; MECHANICAL PROPERTIES; SCANNING ELECTRON MICROSCOPY; THERMAL ANALYSIS;

EID: 84940856861     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.10.2.2809-2822     Document Type: Article

References (29)

1. Acik, M., Mattevi, C., Gong, C., Lee, G., Cho, K., Chhowalla, M., and Chabal, Y. J. (2010). "The role of intercalated water in multilayered graphene oxide". ACS Nano. 4(10), 5861-5868. DOI: 10.1021/nn101844t
2. Chen, W., Yu, H., Liu, Y., Chen, P., Zhang, M., and Hai, Y. (2011a). "Individualization of cellulose nanofibers from wood using high-intensity ultrasonication combined with chemical pretreatments". Carbohyd. Polym. 83(4), 1804-1811. DOI: 10.1016/j.carbpol.2010.10.040
3. Chen, W., Yu, H., and Liu, Y. (2011b). "Preparation of millimeter-long cellulose I nanofibers with diameters of 30-80 nm from bamboo fibers". Carbohyd. Polym. 86(2), 453-461. DOI: 10.1016/j.carbpol.2011.04.061
4. Chen, C., Huang, J., Zhang, Q., Gong, W., Yang, Q., Wang, M., and Yang, Y. (2012). "Annealing a graphene oxide film to produce a freestanding high conductive graphene film". Carbon 50(2), 659-667. DOI: 10.1016/j.carbon.2011.09.022
5. Deepa, B., Abraham, E., Cherian, B. M., Bismarck, A., Blaker, J. J., Pothan, L. A., Leao, A. L., Souza, S. F., and Kottaisamy, M. (2011). "Structure, morphology and thermal characteristics of banana nano fibers obtained by steam explosion". Bioresour. Technol. 102(2), 1988-1997. DOI: 10.1016/j.biortech.2010.09.030
6. Elanthikkal, S., Gopalakrishnapanicker, U., Varghese, S., and Guthrie, J. T. (2010). "Cellulose microfibres produced from banana plant wastes: Isolation and characterization". Carbohyd. Polym. 80(3), 852-859. DOI: 10.1016/j.carbpol.2009.12.043
7. Eigler, S., Dotzer, C., and Hirsch, A. (2012). "Visualization of defect densities in reduced graphene oxide". Carbon 50(10), 3666-3673. DOI: 10.1016/j.carbon.2012.03.039
8. Feng, Y., Zhang, X., Shen, Y., Yoshino, K., and Feng, W. (2012). "A mechanically strong, flexible and conductive film based on bacterial cellulose/graphene nanocomposite". Carbohyd. Polym. 87(1), 644-649. DOI: 10.1016/j.carbpol.2011.08.039
9. Gao, K. Z., Shao, Z. Q., Wu, X., Wang, X., Li, J., et al. (2013). "Cellulose nanofibers /reduced graphene oxide flexible transparent conductive paper". Carbohyd. Polym. 97, 243-251. DOI: 10.1016/j.carbpol.2013.03.067
10. Han, D. L., Yan, L., Chen, W., and Li, W. (2011a). "Preparation of chitosan/graphene oxide composite film with enhanced mechanical strength in the wet state". Carbohydr. Polym. 83(2), 653-658. DOI: 10.1016/j.carbpol.2010.08.038
11. Han, D. L., Yan, L. F., Chen, W. F., Li, W., and Bangal, P. R. (2011b). "Cellulose/ graphite oxide composite films with improved mechanical properties over a wide range of temperature". Carbohyd. Polym. 83(2), 966-972. DOI: 10.1016/j.carbpol.2010.09.006
12. Hummers, W. S., and Offenman, R. E. (1958). "Preparation of graphitic oxide". J. Am. Chem. Soc. 80(6), 1339. DOI: 10.1021/ja01539a017
13. Jandas, P. J., Mohanty, S., and Nayak, S. K. (2013). "Surface treated banana fiber reinforced poly (lactic acid) nanocomposites for disposable applications". J. Clean Prod. 52(1), 392-401. DOI: 10.1016/j.jclepro.2013.03.033
14. Kim, C. J., Khan, W., Kim, D., Cho, K., and Park, S. (2011). "Graphene oxide/cellulose composite using NMMO monohydrate". Carbohydr. Polym. 86(2), 903-909. DOI: 10.1016/j.carbpol.2011.05.041
15. Kovtyukhova, N. I., Ollivier, P. J., Martin, B. R., Mallouk, T. E., Chizhik, S. A., Buzaneva, E. V., and Gorchinskiy, A. D. (1999). "Layer-by-layer assembly of ultrathin composite films from micro-sized graphite oxide sheets and polycations". Chem. Mater. 11(3), 771-778. DOI: 10.1021/cm981085u
16. Lim, H. N., Huang, N. M., and Loo, C. H. (2012). "Facile preparation of graphene-based chitosan films: Enhanced thermal, mechanical and antibacterial properties". J. Non-Cryst. Solids. 358, 525-530. DOI: 10.1016/j.jnoncrysol.2011.11.007
17. Li, J. H., Kuang, D. Z., Feng, Y. L., Zhang, F. X., Xu, Z. F., and Liu, M. Q. (2012). "A graphene oxide-based electrochemical sensor for sensitive determination of 4-nitrophenol". J. Hazard Mater. 201-202, 250-259. DOI: 10.1016/j.jhazmat.2011.11.076
18. Luong, N. D., Pahimanolis, N., Hippi, U., Korhonen, J. T., Ruokolainen, J., Johansson, L. S., Nam, J. D., and Seppälä, J. (2011). "Graphene/cellulose nanocomposite paper with high electrical and mechanical performances". J. Mater. Chem. 21, 13991-13998. DOI: 10.1039/C1JM12134K
19. Paredes, J. I., Villar-Rodil, S., Martinez-Alonso, A., and Tascón, J. M. D. (2008). "Graphene oxide dispersions in organic solvents". Langmuir 24(19), 10560-10564. DOI: 10.1021/la801744a
20. Park, S., Lee, K., Bozoklu, G., Cai, W., Nguyen, S. T., and Ruoff, R. S. (2008). "Graphene oxide papers modified by divalent ions-Enhancing mechanical properties via chemical cross-linking". ACS Nano 2(3), 572-578. DOI: 10.1021/nn700349a.
21. Shao, G., Lu, Y., Wu, F., Yang, C., Zeng, F., and Wu, Q. (2012). "Graphene oxide: The mechanisms of oxidation and exfoliation". J. Mater Sci. 47(10), 4400-4409. DOI: 10.1007/s10853-012-6294-5
22. Tang, L., Li, X., Du, D., and He, C. J. (2012). "Fabrication of multilayer films from regenerated cellulose and graphene oxide through layer-by-layer assembly". Prog. Nat. Sci. 22(4), 341-346. DOI: 10.1016/j.pnsc.2012.06.005
23. Wang, Y., Xie, L., Sha, J., Ma, Y., Han, J., Dong, S., Liu, H., Fang, C., Gong, S., and Wu, Z. (2011). "Preparation and chemical reduction of laurylamine-intercalated graphite oxide". J. Mater Sci. 46(10), 3611-3621. DOI:10.1007/s10853-011-5277-2.
24. Wang, B. G., Lou, W. J., Wang, X. B., and Hao, J. C. (2012). "Relationship between dispersion state and reinforcement effect of graphene oxide in nanocrystalline cellulose-graphene oxide composite films". J. Mater. Chem. 22(25), 12859-12866. DOI: 10.1039/C2JM31635H
25. Wang, J. J., Miao, F., and Zhan, H. B. (2014). "Preparation, characterization, and nonlinear optical properties of graphene oxide-carboxymethyl cellulose composite films". Optics & Laser Technology 57, 84-89. DOI: 10.1016/j.optlastec.2013.09.040
26. Yadav, M., Rhee, K. Y., Jung, I. H., and Park, S. J. (2013). "Eco-friendly synthesis, characterization and properties of a sodium carboxymethyl cellulose/graphene oxide nanocomposite film". Cellulose 20(2), 687-698. DOI: 10.1007/s10570-012-9855-5
27. Yao, L., Lu, Y., Wang, Y., and Hu, L. (2014). "Effect of graphene oxide on the solution rheology and the film structure and properties of cellulose carbamate". Carbon 69(April 2014), 552-562. DOI: 10.1016/j.carbon.2013.12.066
28. Yousefi, H., Faezipour, M., Hedjazi, S., Mousavi, M. M., Azusa, Y., and Heidari, A. H. (2013). "Comparative study of paper and nanopaper properties prepared from bacterial cellulose nanofibers and fibers/ground cellulose nanofibers of canola straw". Ind. Crops Prod. 43, 732-737. DOI: 10.1016/j.indcrop.2012.08.030
29. Zuluaga, R., Putaux, J. L., Cruz, J., Vélez, J., Mondragon, I., and Gañán, P. (2009). "Cellulose microfibrils from banana rachis: Effect of alkaline treatments on structural and morphological features". Carbohyd. Polym.76(1), 51-59. DOI: 10.1016/j.carbpol.2008.09.024