Amide-containing segmented copolymers

Progress in Polymer Science

Volumn 45, Issue , 2015, Pages 1-22

  Buckwalter, Daniel J ^a   Dennis, Joseph M ^a   Long, Timothy E ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

Hydrogen bonding; Microphase separation; Poly(amide); Segmented copolymer; Thermoplastic elastomer

Indexed keywords

COPOLYMERS; HYDROGEN; HYDROGEN BONDS; MECHANICAL PROPERTIES; MICROPHASE SEPARATION; PHYSICAL PROPERTIES; THERMOPLASTIC ELASTOMERS;

COPOLYMER STRUCTURE; EMERGING TECHNOLOGIES; MECHANICAL PERFORMANCE; MORPHOLOGY AND MECHANICAL PROPERTIES; SEGMENTED COPOLYMER; STATE OF THE ART; STRUCTURAL MODIFICATIONS; SYNTHETIC METHODS;

AMIDES;

EID: 84939991399     PISSN: 00796700     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.progpolymsci.2014.11.003     Document Type: Review

References (144)

1. A.M. Castagna, A. Pangon, T. Choi, G.P. Dillon, and J. Runt The role of soft segment molecular weight on microphase separation and dynamics of bulk polymerized polyureas Macromolecules 45 2012 8438 8444
2. S. Chakrabarty, M. Nisenholt, and K.J. Wynne PDMS-fluorous polyoxetane-PDMS triblock hybrid elastomers: tough and transparent with novel bulk morphologies Macromolecules 45 2012 7900 7913
3. A.T. ten Cate, and R.P. Sijbesma Coils, rods and rings in hydrogen-bonded supramolecular polymers Macromol Rapid Commun 23 2002 1094 1112
4. M.J. van der Schuur, and R.J. Gaymans Influence of morphology on the properties of segmented block copolymers Polymer 48 2007 1998 2006
5. Y. Camberlin, and J.P. Pascault Phase segregation kinetics in segmented linear polyurethanes - relations between equilibrium time and chain mobility and between equilibrium degree of segregation and interaction parameter J Polym Sci Part A Polym Chem 22 1984 1835 1844
6. R.M. Versteegen, R.P. Sijbesma, and E.W. Meijer Synthesis and characterization of segmented copoly(ether urea)s with uniform hard segments Macromolecules 38 2005 3176 3184
7. J. Fang, K. Tanaka, H. Kita, K.I. Okamoto, and Y. Ito Positron annihilation properties of copolyimides and copolyamides with microphase-separated structures J Polym Sci Part A Polym Chem 38 2000 1123 1132
8. S. Mallakpour, and F. Rafiemanzelat Study of the miscibility of hard and soft segments of optically active poly(amide-imide-ether-urethane) copolymers based-l-leucine with different soft segments Polym Bull 56 2006 9 18
9. E. Okoroafor, and J. Rault Cryodilation of thermoplastic PEBA elastomers J Polym Sci Part A Polym Chem 29 1991 1427 1436
10. B. Tavernier, J. Mewis, P. Van Puyvelde, M. Takenaka, B. Ernst, and T. Hashimoto Effect of thermomechanical history on the crystallization of poly(ether-block-amide) Polym Eng Sci 48 2008 2418 2425
11. J. Dodge Polyurethanes and polyureas M. Rodgers, T.E. Long, Synthetic methods in step-growth polymers 2003 John Wiley & Sons Inc Hoboken, NJ 197 263
12. I. Yilgor, T. Eynur, S. Bilgin, E. Yilgor, and G.L. Wilkes Influence of soft segment molecular weight on the mechanical hysteresis and set behavior of silicone-urea copolymers with low hard segment contents Polymer 52 2011 266 274
13. J.E. Mark Some interesting things about polysiloxanes Acc Chem Res 37 2004 946 953
14. S. Das, I. Yilgor, E. Yilgor, and G.L. Wilkes Probing the urea hard domain connectivity in segmented, non-chain extended polyureas using hydrogen-bond screening agents Polymer 49 2008 174 179
15. J. Krijgsman, J. Feijen, and R.J. Gaymans Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide): 3. Influence of tetra-amide content Polymer 45 2004 8523 8530
16. L.T.J. Korley, B.D. Pate, E.L. Thomas, and P.T. Hammond Effect of the degree of soft and hard segment ordering on the morphology and mechanical behavior of semicrystalline segmented polyurethanes Polymer 47 2006 3073 3082
17. B. Pukánszky Jr., K. Bagdi, Z. Tóvölgyi, J. Varga, L. Botz, S. Hudak, T. Dóczi, and B. Pukánszky Nanophase separation in segmented polyurethane elastomers: effect of specific interactions on structure and properties Eur Polym J 44 2008 2431 2438
18. S.K. Jewrajka, E. Yilgor, I. Yilgor, and J.P. Kennedy Polyisobutylene-based segmented polyureas I. Synthesis of hydrolytically and oxidatively stable polyureas J Polym Sci Part A Polym Chem 47 2008 38 48
19. D. Tang, D.J. Mulder, B.A.J. Noordover, and C.E. Koning Well-defined biobased segmented polyureas synthesis via a TBD-catalyzed isocyanate-free route Macromol Rapid Commun 32 2011 1379 1385
20. S.M. June, T. Suga, W.H. Heath, T.E. Long, Q. Lin, and R. Puligadda Photo-reactive polyimides and poly(siloxane imide)s as reversible polymeric interfaces J Adhes 86 2010 1012 1028
21. K. Xi, Z. Meng, L. Heng, R. Ge, H. He, X. Yu, and X. Jia Polyimide-polydimethylsiloxane copolymers for low-dielectric-constant and moisture-resistance applications J Appl Polym Sci 113 2009 1633 1641
22. S.M. June, P. Bissel, and T.E. Long Segmented block copolyesters using click chemistry J Polym Sci Part A Polym Chem 50 2012 3797 3805
23. M. Zhang, R.B. Moore, and T.E. Long Melt transesterification and characterization of segmented block copolyesters containing 2,2,4,4-tetramethyl-1,3-cyclobutanediol J Polym Sci Part A Polym Chem 50 2012 3710-8, S/1-S/2
24. S. Oprea, and V.O. Potolinca Synthesis and characterization of linear and crosslinked poly(urethane urea) elastomers with triazine moieties in the main chain Monomers Polym 16 2013 47 55
25. M. Niesten, J.W. ten Brinke, and R.J. Gaymans Segmented copolyetheresteraramids with extended poly(tetramethyleneoxide) segments Polymer 42 2001 1461 1469
26. K.E. Strawhecker, A.J. Hsieh, T.L. Chantawansri, Z.I. Kalcioglu, and K.J. Van Vliet Influence of microstructure on micro-/nano-mechanical measurements of select model transparent poly(urethane urea) elastomers Polymer 54 2013 901 908
27. J.P. Sheth, D.B. Klinedinst, G.L. Wilkes, Y. Iskender, and I. Yilgor Role of chain symmetry and hydrogen bonding in segmented copolymers with monodisperse hard segments Polymer 46 2005 7317 7322
28. J.P. Sheth, E. Yilgor, B. Erenturk, H. Ozhalici, I. Yilgor, and G.L. Wilkes Structure-property behavior of poly(dimethylsiloxane) based segmented polyurea copolymers modified with poly(propylene oxide) Polymer 46 2005 8185 8193
29. I. Yilgor, and E. Yilgor Structure-morphology-property behavior of segmented thermoplastic polyurethanes and polyureas prepared without chain extenders Polym Rev 47 2007 487 510
30. S. Mallakpour, and E. Kowsari Polycondensation reaction of N N′-(4,4′-oxydiphthaloyl)-bis-L-methionine diacid chloride with aromatic diamines: synthesis and properties J Appl Polym Sci 99 2006 1038 1044
31. V.R. Pattabiraman, and J.W. Bode Rethinking amide bond synthesis Nature 480 2011 471 479
32. S. Shabbir, S. Zulfiqar, Z. Ahmad, and M.I. Sarwar Pyrimidine based carboxylic acid terminated aromatic and semiaromatic hyperbranched polyamide-esters: synthesis and characterization Tetrahedron 66 2010 7204 7212
33. F. Poulhès, D. Mouysset, G. Gil, M.P. Bertrand, and S. Gastaldi Novozym 435-catalyzed synthesis of polyetheramides from amino-esters, or diesters and diamines built on ethylene- and diethylene-glycol moieties Polymer 53 2012 1172 1179
34. C. Yi, Z. Peng, H. Wang, M. Li, and C. Wang Synthesis and characteristics of thermoplastic elastomer based on polyamide-6 Polym Int 60 2011 1728 1736
35. S. Arsenault New technological developments with PEBAX Annu Tech Conf Soc Plast Eng 2008 775 788
36. M.C. Choi, J.Y. Jung, H.S. Yeom, and Y.W. Chang Mechanical, thermal, barrier, and rheological properties of poly(ether-block-amide) elastomer/organoclay nanocomposite prepared by melt blending Polym Eng Sci 53 2012 982 991
37. A. Gugliuzza Poly(ether-block-amide) copolymers synthesis, properties and applications S. Thomas, P.M. Visakh, Handbook of engineering and specialty thermoplastics 2012 John Wiley & Sons Inc Hoboken, NJ 111 140
38. Y. Wang, S.M. Alhassan, V.H. Yang, and D.A. Schiraldi Polyether-block-amide copolymer/clay films prepared via a freeze-drying method Compos Part B 45 2013 625 630
39. L. Huo, and L. Hua Synthesis of segmented block copolymers based on Polyamide-1010 and polytetramethylene glycol Adv Mater Res 512-515 2012 2185 2190
40. 2 gas-separation properties of poly(ethylene oxide)-segmented copolymers J Polym Sci Part B Polym Phys 38 2000 1707 1715
41. J.H. Kim, S.Y. Ha, and Y.M. Lee Gas permeation of poly(amide-6-b-ethylene oxide) copolymer J Memb Sci 190 2001 179 193
42. S. Armstrong, B. Freeman, A. Hiltner, and E. Baer Gas permeability of melt-processed poly(ether block amide) copolymers and the effects of orientation Polymer 53 2012 1383 1392
43. G. Wang, and B. Xue Synthesis and characterization of poly(ether-block-amide) and application as permanent antistatic agent J Appl Polym Sci 118 2010 2448 2453
44. A. Boulares, M. Tessier, and E. Maréchal Synthesis and characterization of poly(copolyethers-block-polyamides) II. Characterization and properties of the multiblock copolymers Polymer 41 2000 3561 3580
45. M. Peyravi, A.A. Babaluo, M.A. Ardestani, M.K.R. Aghjeh, S.R. Pishghadam, and P. Hadi Study on the synthesis of poly(ether-block-amide) copolymer based on nylon6 and poly(ethylene oxide) with various block lengths J Appl Polym Sci 118 2010 1211 1218
46. B.B. Sauer, R.S. McLean, and R.R. Thomas Nanometer resolution of crystalline morphology using scanning probe microscopy Polym Int 49 2000 449 452
47. G.R. Hatfield, Y. Guo, W.E. Killinger, R.A. Andrejak, and P.M. Roubicek Characterization of structure and morphology in two poly(ether-block-amide) copolymers Macromolecules 26 1993 6350 6353
48. A. Begenir, S. Michielsen, and B. Pourdeyhimi Crystallization behavior of elastomeric block copolymers: thermoplastic polyurethane and polyether-block-amide J Appl Polym Sci 111 2009 1246 1256
49. B.B. Sauer, R.S. McLean, D.J. Brill, and D.J. Londono Morphology and orientation during the deformation of segmented elastomers studied with small-angle X-ray scattering and atomic force microscopy J Polym Sci Part A Polym Chem 40 2002 1727 1740
50. Y. Song, H. Yamamoto, and N. Nemoto Segmental orientations and deformation mechanism of poly(ether-block-amide) films Macromolecules 37 2004 6219 6226
51. E.V. Konyukhova, A.I. Buzin, and Y.K. Godovsky Melting of polyether block amide (Pebax): the effect of stretching Thermochim Acta 391 2002 271 277
52. I.K. Yang, and P.H. Tsai Rheological characterization and microphase-separated structure of a poly(ether-block-amide) segmented block copolymer J Polym Sci Part A Polym Chem 43 2005 2557 2567
53. J.P. Sheth, J. Xu, and G.L. Wilkes Solid state structure-property behavior of semicrystalline poly(ether-block-amide) PEBAX® thermoplastic elastomers Polymer 44 2003 743 756
54. N. Alberola, A. Vassel, and J.C. Helluin Mechanical relaxation processes in polyether block amide copolymers (PEBA) Makromol Chem Macromol Symp 23 1989 219 224
55. C. Hucher, R.P. Eustache, F. Beaume, and P. Tekely Motional heterogeneity in poly(ether-block-amide) copolymers as revealed by solid-state NMR Macromolecules 38 2005 9200 9209
56. J.P. Sheth, A. Aneja, G.L. Wilkes, E. Yilgor, G.E. Atilla, I. Yilgor, and F.L. Beyer Influence of system variables on the morphological and dynamic mechanical behavior of polydimethylsiloxane based segmented polyurethane and polyurea copolymers: a comparative perspective Polymer 45 2004 6919 6932
57. D.B. Klinedinst, E. Yilgör, I. Yilgör, F.L. Beyer, and G.L. Wilkes Structure-property behavior of segmented polyurethaneurea copolymers based on an ethylene-butylene soft segment Polymer 46 2005 10191 10201
58. R.M. Versteegen, R. Kleppinger, R.P. Sijbesma, and E.W. Meijer Properties and morphology of segmented copoly(ether urea)s with uniform hard segments Macromolecules 39 2006 772 783
59. E. Wisse, A.J.H. Spiering, E.N.M. van Leeuwen, R.A.E. Renken, P.Y.W. Dankers, L.A. Brouwer, M.J.A. van Luyn, M.C. Harmsen, N. Sommerdijk, and E.W. Meijer Molecular recognition in poly(epsilon-caprolactone)-based thermoplastic elastomers Biomacromolecules 7 2006 3385 3395
60. L. Guang, and R.J. Gaymans Polyesteramides with mixtures of poly(tetramethylene oxide) and 1,5-pentanediol Polymer 38 1997 4891 4896
61. M.C.E.J. Niesten, R. Tol, and R.J. Gaymans Influence of type of uniform aromatic amide units on segmented copolyetheresteramides Polymer 42 2001 931 939
62. F. Quaglia, M.C. Vignola, G. De Rosa, M.I. La Rotonda, G. Maglio, and R. Palumbo New segmented copolymers containing poly(É-caprolactone) and etheramide segments for the controlled release of bioactive compounds J Control Release 83 2002 263 271
63. S. D'Angelo, P. Galletti, G. Maglio, M. Malinconico, P. Morelli, R. Palumbo, and M.C. Vignola Segmented poly(ether-ester-amide)s based on poly(l,l-lactide) macromers Polymer 42 2001 3383 3392
64. A.A. Deschamps, D.W. Grijpma, and J. Feijen Phase separation and physical properties of PEO-containing poly(ether ester amide)s J Biomater Sci Polym Ed 13 2002 1337 1352
65. J. Krijgsman, J. Feijen, and R.J. Gaymans Synthesis and properties of segmented copolymers of polyphenylene ether and tetra-amide units Macromol Symp 199 2003 135 146
66. J. Krijgsman, G.J.E. Biemond, and R.J. Gaymans Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide) by direct coupling J Appl Polym Sci 103 2007 512 518
67. S. Ghosh, A.K. Bhattacharyya, D. Khastgir, and A.K. Bhowmick Melt rheology of segmented polyamides: effect of block molecular weight J Appl Polym Sci 71 1999 1739 1747
68. P.F. van Hutten, R.M. Mangnus, and R.J. Gaymans Segmented copolymers with polyesteramide units of uniform length: structure analysis Polymer 34 1993 4193 4202
69. J. Krijgsman, G.J.E. Biemond, and R.J. Gaymans Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide). Part 4. Influence of the extender Polymer 46 2005 8250 8257
70. G.J.E. Biemond, J. Feijen, and R.J. Gaymans Segmented block copolymers with monodisperse hard segments: the influence of H-bonding on various properties Macromol Mater Eng 294 2009 492 501
71. J. Krijgsman, J. Feijen, and R.J. Gaymans Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide): 1. Synthesis and thermal-mechanical properties Polymer 45 2004 4677 4684
72. M.C.E.J. Niesten, J. Feijen, and R.J. Gaymans Synthesis and properties of segmented copolymers having aramid units of uniform length Polymer 41 2000 8487 8500
73. A. Arun, and R.J. Gaymans Tensile and elastic properties of triblock copolymer based on aramide end-segments and polyether mid-segments J Appl Polym Sci 111 2009 1780 1785
74. B.B. Sauer, R.S. McLean, R.J. Gaymans, and M.C.J.E. Niesten Crystalline morphologies in segmented copolymers with hard segments of uniform length J Polym Sci Part A Polym Chem 42 2004 1783 1792
75. G.J.E. Biemond, J. Feijen, and R.J. Gaymans Poly(ether amide) segmented block copolymers with adipic acid based tetraamide segments J Appl Polym Sci 105 2007 951 963
76. M. van der Schuur, and R.J. Gaymans Segmented block copolymers based on poly(propylene oxide) and monodisperse polyamide-6, T segments J Polym Sci Part A Polym Chem 44 2006 4769 4781
77. G.J.E. Biemond, J. Feijen, and R.J. Gaymans Influence of polydispersity of crystallizable segments on the properties of segmented block copolymers Polym Eng Sci 48 2008 1389 1400
78. M. van der Schuur, J.D. Boer, and R.J. Gaymans Structure-property relations of poly(propylene oxide) block copolymers with monodisperse and polydisperse crystallisable segments Polymer 46 2005 9243 9256
79. D. Husken, J. Feijen, and R.J. Gaymans Surface properties of poly(ethylene oxide)-based segmented block copolymers with monodisperse hard segments J Appl Polym Sci 114 2009 1264 1269
80. J. Krijgsman, J. Feijen, and R.J. Gaymans Segmented copolymers of uniform tetra-amide units and poly(phenylene oxide): 2. Crystallisation behaviour Polymer 45 2004 4685 4691
81. K. Bouma, G.A. Wester, and R.J. Gaymans Polyether-amide segmented copolymers based on ethylene terephthalamide units of uniform length J Appl Polym Sci 80 2001 1173 1180
82. M. van der Schuur, E. van der Heide, J. Feijen, and R.J. Gaymans Structure-property relations of segmented block copolymers with liquid-liquid demixed morphologies Polymer 46 2005 3616 3627
83. M. van der Schuur, and R.J. Gaymans Influence of chemical crosslinks on the elastic behavior of segmented block copolymers Polymer 46 2005 6862 6868
84. J. Krijgsman, D. Husken, and R.J. Gaymans Synthesis and properties of thermoplastic elastomers based on PTMO and tetra-amide Polymer 44 2003 7573 7588
85. D. Husken, J. Krijgsman, and R.J. Gaymans Segmented blockcopolymers with uniform amide segments Polymer 45 2004 4837 4843
86. M.C.E.J. Niesten, and R.J. Gaymans Tensile and elastic properties of segmented copolyetheresteramides with uniform aramid units Polymer 42 2001 6199 6207
87. G.J.E. Biemond, J. Feijen, and R.J. Gaymans Tensile properties of segmented block copolymers with monodisperse hard segments J Mater Sci 43 2008 3689 3696
88. J. Krijgsman, and R.J. Gaymans Tensile and elastic properties of thermoplastic elastomers based on PTMO and tetra-amide units Polymer 45 2004 437 446
89. M.C.E.J. Niesten, S. Harkema, E. van der Heide, and R.J. Gaymans Structural changes of segmented copolyetheresteramides with uniform aramid units induced by melting and deformation Polymer 42 2001 1131 1142
90. P.A.M. Lips, R. Broos, M.J.M. van Heeringen, P.J. Dijkstra, and J. Feijen Synthesis and characterization of poly(ester amide)s containing crystallizable amide segments Polymer 46 2005 7823 7833
91. G. Deshayes, C. Delcourt, I. Verbruggen, L. Trouillet-Fonti, F. Touraud, E. Fleury, P. Degee, M. Destarac, R. Willem, and P. Dubois Novel polyesteramide-based diblock copolymers: synthesis by ring-opening copolymerization and characterization Macromol Chem Phys 210 2009 1033 1043
92. G.E. Luckachan, and C.K.S. Pillai Random multiblock poly(ester amide)s containing poly(l-lactide) and cycloaliphatic amide segments: synthesis and biodegradation studies J Polym Sci Part A Polym Chem 44 2006 3250 3260
93. P.A.M. Lips, M.J.A. van Luyn, F. Chiellini, L.A. Brouwer, I.W. Velthoen, P.J. Dijkstra, and J. Feijen Biocompatibility and degradation of aliphatic segmented poly(ester amide)s: in vitro and in vivo evaluation J Biomed Mater Res A 76A 2006 699 710
94. X. Pang, J. Wu, C. Reinhart-King, and C.C. Chu Synthesis and characterization of functionalized water soluble cationic poly(ester amide)s J Polym Sci Part A Polym Chem 48 2010 3758 3766
95. R.J. Gaymans, and A.W. van Swaaij Enhancing the drawability of a polyester by copolymerization with a second type of crystallizable block J Appl Polym Sci 119 2011 23 30
96. H.M. Jeong, S.W. Moon, J.Y. Jho, and T.O. Ahn Phase structure and properties of some thermoplastic polyesteramide elastomers Polymer 39 1998 459 465
97. A.S. Palsule, and Y. Poojari Enzymatic synthesis of silicone fluorinated aliphatic polyesteramides Polymer 51 2010 6161 6167
98. B. Sharma, A. Azim, H. Azim, R.A. Gross, E. Zini, M.L. Focarete, and M. Scandola Enzymatic synthesis and solid-state properties of aliphatic polyesteramides with polydimethylsiloxane blocks Macromolecules 40 2007 7919 7927
99. D. Chromcova, L. Baslerova, J. Roda, and J. Brozek Polymerization of lactams. 99 Preparation of polyesteramides by the anionic copolymerization of epsilon-caprolactam and epsilon-caprolactone Eur Polym J 44 2008 1733 1742
100. A. Bernaskova, D. Chromcova, J. Brozek, and J. Roda Polymerization of lactams, 95 - Part 94 - Preparation of polyesteramides by the anionic polymerization of epsilon-caprolactam in the presence of poly(epsilon-caprolactone) Polymer 45 2004 2141 2148
101. S. Bera, and Z. Jedlinski Block/segmented polymers. A new method of synthesis of copoly(amide-ester)-ester polymer J Polym Sci Part A Polym Chem 31 1993 731 739
102. S. Liu, C. Li, J. Zhao, Z. Zhang, and W. Yang Synthesis and characterization of polyesteramides having short Nylon-6 segments in the main chains through polycondensation and chain extension Polymer 52 2011 6046 6055
103. G. Deshayes, C. Delcourt, I. Verbruggen, L. Trouillet-Fonti, F. Touraud, E. Fleury, P. Degee, M. Destarac, R. Willem, and P. Dubois Novel polyesteramide-based di- and triblock copolymers From thermo-mechanical properties to hydrolytic degradation Eur Polym J 47 2011 98 110
104. S. Coe, J.J. Kane, T.L. Nguyen, L.M. Toledo, E. Wininger, F.W. Fowler, and J.W. Lauher Molecular symmetry and the design of molecular solids: the oxalamide functionality as a persistent hydrogen bonding unit J Am Chem Soc 119 1997 86 93
105. T.L. Nguyen, F.W. Fowler, and J.W. Lauher Commensurate and incommensurate hydrogen bonds. An exercise in crystal engineering J Am Chem Soc 123 2001 11057 11064
106. H. Schulze Thermoplastic adhesive polyoxamide from polyoxypropylene polyamine. US4119615A 1978 Texaco Development Corp. USA 7 pp
107. K.E. Benson, R.G. Hansen, S.A. Johnson, C.M. Leir, R.Y. Liu, M.D. Purgett, H.M. Schneider, and A.A. Sherman Multilayer films including thermoplastic polyamide-silicone block copolymers. WO2007075900A2 2007 3M Innovative Properties Company USA 45 pp.
108. K.E. Benson, R.G. Hansen, S.A. Johnson, C.M. Leir, R.Y. Liu, M.D. Purgett, H.M. Schneider, and A.A. Sherman Films including thermoplastic polyamide-silicone block copolymers. WO2007073502A2 2007 3M Innovative Properties Company USA 31 pp.
109. C. Leir, K. Benson, R. Hansen, M. Purgett, and A. Everaerts Polydiorganosiloxane-containing materials with oxalylamino groups. US20070149745A1 2007 3M Innovative Properties Company USA 12 pp.
110. C. Leir, K. Benson, R. Hansen, M. Purgett, A. Everaerts, and A. Sherman Polydiorganosiloxane polyoxamide copolymers. US20070148474A1 2007 3M Innovative Properties Company USA 16 pp.
111. N.J. Sijbrandi, A.J. Kimenai, E.P.C. Mes, R. Broos, G. Bar, M. Rosenthal, Y. Odarchenko, D.A. Ivanov, P.J. Dijkstra, and J. Feijen Synthesis, morphology, and properties of segmented poly(ether amide)s with uniform oxalamide-based hard segments Macromolecules 45 2012 3948 3961
112. N.J. Sijbrandi, A.J. Kimenai, E.P.C. Mes, R. Broos, G. Bar, M. Rosenthal, Y.I. Odarchenko, D.A. Ivanov, F.J. Jan, and P.J. Dijkstra Synthesis, morphology and properties of segmented poly(ether ester amide)s comprising uniform glycine or beta-alanine extended bisoxalamide hard segments Polymer 53 2012 4033 4044
113. D.J. Buckwalter, A.G. Hudson, R.B. Moore, and T.E. Long Synthesis and characterization of poly(propylene glycol) poly(trioxamide) and poly(urea oxamide) segmented copolymers Polym Int 63 2013 1184 1191
114. D.J. Buckwalter, D.L. Inglefield, J.S. Enokida, A.G. Hudson, R.B. Moore, and T.E. Long Effects of copolymer structure on the mechanical properties of poly(dimethyl siloxane) poly(oxamide) segmented copolymers Macromol Chem Phys 214 2013 2073 2082
115. D.J. Buckwalter, M. Zhang, D.L. Inglefield, R.B. Moore, and T.E. Long Synthesis and characterization of poly(dimethyl siloxane) poly(urea oxamide) segmented copolymers Polymer 54 2013 4849 4857
116. D. Henkensmeier, B.C. Abele, A. Candussio, and J. Thiem Synthesis, characterisation and degradability of polyamides derived from aldaric acids and chain end functionalised polydimethylsiloxanes Polymer 45 2004 7053 7059
117. B.M. Kang, and Y.W. Park A study on phase separation of PA-PDMS composites dependent on molecular weight Polym Plast Technol Eng 49 2010 223 227
118. A. Kishida, T. Furuzono, T.A. Ohshige, I. Maruyama, T. Matsumoto, H. Itoh, M. Murakami, and M. Akashi Study of the surface properties of ultrathin films of poly(dimethylsiloxane)-polyamide multiblock copolymers Angew Makromol Chem 220 1994 89 97
119. T. Matsumoto, T. Uchida, A. Kishida, T. Furuzono, I. Maruyama, and M. Akashi Novel functional polymers: poly(dimethylsiloxane)-polyamide multiblock copolymer, VII. Oxygen permeability of aramid-silicone membranes in a gas-membrane-liquid system J Appl Polym Sci 64 1997 1153 1159
120. T. Furuzono, A. Kishida, M. Yanagi, T. Matsumoto, T. Kanda, T. Nakamura, T. Aiko, I. Maruyama, and M. Akashi Novel functional polymers: poly(dimethylsiloxane)polyamide multiblock copolymer.5, the interaction between biomolecules and the surface of aramid-silicone resins J Biomater Sci Polym Ed 7 1996 871 880
121. T. Furuzono, E. Yashima, A. Kishida, I. Maruyama, T. Matsumoto, and M. Akashi A novel biomaterial - poly(dimethylsiloxane)-polyamide multiblock copolymer.1. Synthesis and evaluation of blood compatibility J Biomater Sci Polym Ed 5 1993 89 98
122. R. Gill, M. Mazhar, and M. Siddiq Structural characterization and thermal behaviour of block copolymers of polydimethylsiloxane and polyamide having trichlorogermyl pendant groups Polym Int 59 2010 1598 1605
123. M.S.U. Khan, Z. Akhter, T. Naz, A.S. Bhatti, H.M. Siddiqi, M. Siddiq, and A. Khan Study on the preparation and properties of novel block copolymeric materials based on structurally modified organometallic as well as organic polyamides and polydimethylsiloxane Polym Int 62 2012 319 334
124. M. Kajiyama, M.A. Kakimoto, and Y. Imai Synthesis and characterization of new multiblock copolymers based on poly(dimethylsiloxane) and aromatic polyamides Macromolecules 22 1989 4143 4147
125. I. Yilgor, B. Lee, W.P. Steckle Jr., J.S. Riffle, D. Tyagi, G.L. Wilkes, and J.E. McGrath Segmented polysiloxane-polyamide copolymers Polym Prepr Am Chem Soc Div Polym Chem 24 2 1983 35 36
126. P.P. Policastro, and P.K. Hernandez Synthesis of new polydimethylsiloxane-polyamide copolymers from phenylene-bis-5-oxazolones and aminopropyl-terminated polydimethylsiloxane oligomers J Polym Sci Part A Polym Chem 25 1987 2819 2826
127. T. Furuzono, K. Seki, A. Kishida, T.A. Ohshige, K. Waki, I. Maruyama, and M. Akashi Novel functional polymers: poly(dimethylsiloxane)-polyamide multiblock copolymer, III. Synthesis and surface properties of disiloxane-aromatic polyamide multiblock copolymer J Appl Polym Sci 59 1996 1059 1065
128. Y. Oishi, S. Nakata, M. Kajiyama, M.A. Kakimoto, and Y. Imai Preparation and properties of new random and block copolyamides derived from 1,3-bis(3-aminopropyl)tetramethyldisiloxane, aromatic diamines, and isophthaloyl chloride J Polym Sci Part A Polym Chem 30 1992 2357 2364
129. A. Kishida, T. Kanda, T. Furuzono, I. Maruyama, and M. Akashi Novel functional polymers: poly(dimethylsiloxane)-polyamide multiblock copolymer, IX. Surface properties of blend film of aramid-silicone resins with aramid J Appl Polym Sci 78 2000 2198 2205
130. T. Furuzono, K. Senshu, A. Kishida, T. Matsumoto, and M. Akashi Novel functional polymers: poly(dimethylsiloxane)-polyamide multiblock copolymer.6. A transmission electron microscopic study on microphase-separated structure in aramid-silicone resin Polym J 29 1997 201 203
131. K. Senshu, T. Furuzono, N. Koshizaki, S. Yamashita, T. Matsumoto, A. Kishida, and M. Akashi Novel functional polymers: poly(dimethylsiloxane)-polyamide multiblock copolymer. 8.1 Surface studies of aramid-silicone resin by means of XPS, Static SIMS, and TEM Macromolecules 30 1997 4421 4428
132. E.C. Kang, T. Kaneko, D. Shiino, and M. Akashi Novel functional polymers: poly(dimethyl siloxane)-polyamide multiblock copolymers XI. The effects of sequence regularity on the thermal and mechanical properties J Polym Sci Part A Polym Chem 41 2003 841 852
133. T. Matsumoto, Y. Koinuma, K. Waki, A. Kishida, T. Furuzono, I. Maruyama, and M. Akashi Novel functional polymers: poly(dimethylsiloxane)-polyamide multiblock copolymer IV. Gas permeability and thermomechanical properties of aramid-silicone resins J Appl Polym Sci 59 1996 1067 1071
134. M. Kolahdoozan, R. Mirsafaei, and S. Mallakpour Synthesis and properties of new highly soluble poly(amide-ester-imide)s containing poly(ethylene glycol) as a soft segment Polym Bull 68 2012 1239 1254
135. S. Mallakpour, and F. Rafiemanzelat Synthesis and characterization of new optically active poly(amide-imide-urethane) thermoplastic elastomers, derived from bis(p-amido benzoic acid)-N-trimellitylimido-l-leucine and polyoxyethylene-MDI React Funct Polym 62 2005 153 167
136. T.M. Chapman, and K.G. Marra Determination of low critical surface tensions of novel fluorinated poly(amide urethane) block copolymers 2. Fluorinated soft-block backbone and side chains Macromolecules 28 1995 2081 2085
137. M. van der Schuur, B. Noordover, and R.J. Gaymans Polyurethane elastomers with amide chain extenders of uniform length Polymer 47 2006 1091 1100
138. Y.W. Park, and D.S. Lee Surface and electrical characteristics of poly(amide imide)-poly(dimethylsiloxane) nanocomposites J Appl Polym Sci 93 2004 342 347
139. S. Mallakpour, and F. Rafiemanzelat Synthesis, characterization and properties of a series of copoly(amide-imide-ether-urethane)s with a new hard segment constituent: study of the effect of hard segment content High Perform Polym 20 2008 146 165
140. J.E. Báez, D. Ramírez, J.L. Valentín, and Á. Marcos-Fernández Biodegradable poly(ester-urethane-amide)s based on poly(É-caprolactone) and diamide-diol chain extenders with crystalline hard segments. synthesis and characterization Macromolecules 45 2012 6966 6980
141. K. Nojima, K. Sanui, N. Ogata, N. Yui, K. Kataoka, and Y. Sakurai Material characterization of segmented polyether poly(urethane-urea-amide)s and its implication in blood compatibility Polymer 28 1987 1017 1024
142. S. Mallakpour, M. Khani, and F. Rafiemanzelat Synthesis and characterization of new optically active segmented poly(amide imide urethane)s based on different diacids via an isocyanate route J Appl Polym Sci 108 2008 2975 2982
143. S. Mallakpour, and S. Khoee Synthesis and characterization of new optically active poly(amide-imide-urethane) thermoplastic elastomers, derived from 4,4′-(hexafluoroisopropylidene)-N,N′-bis(phthaloyl-L-leucine-p-aminobenzoic acid) and PEG-MDI J Appl Polym Sci 91 2004 2288 2294
144. N. Yui, K. Nojima, K. Sanui, and N. Ogata Morphology and properties of segmented polyether poly(urethane-urea-amide) Polym J 17 1985 969 975