Synthesis, characterization and properties of a series of copoly(amide-imide-ether-urethane)s with a new hard segment constituent: Study of the effect of hard segment content

High Performance Polymers

Volumn 20, Issue 2, 2008, Pages 146-165

  Mallakpour, Shadpour ^a   Rafiemanzelat, Fatemeh ^a  

^a ISFAHAN UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Copoly(amide imide ether urethane)s; Hard segment content; Isocyanate route; L leucine; Phase separation

Indexed keywords

ELASTOMERS; MECHANICAL PROPERTIES; OLIGOMERS; SYNTHESIS (CHEMICAL); THERMODYNAMIC PROPERTIES;

COPOLYAMIDE-IMIDE-ETHER-URETHANES; HARD SEGMENT CONTENT; ISOCYANATE ROUTE;

POLYURETHANES;

EID: 40949149005     PISSN: 09540083     EISSN: 13616412     Source Type: Journal    
DOI: 10.1177/0954008307082626     Document Type: Article

References (51)

1. Sheth, J.P., Xu, J. and Wilkes, G.L. (2003). Solid State Structure-Property Behavior of Semicrystalline Poly(ether-b-amide) PEBAX® Thermoplastic Elastomers, Polymer, 44 (3). 743-756.
2. Holden, G. Thermoplastic Elastomers. In: Salamone JC, editor. Polymeric Materials Encyclopedia 11 8343, New York, CRC Press, 1996.
3. Ukielski, R. (2000). New Multiblock Ter-Poly(ester-ether-amide) Thermoplastic Elastomers with Various Chemical Composition of Ester Block, Polymer, 41 (5): 1893-1904.
4. Hoffman, D.M. (2002). Dynamic Mechanical Signatures of a Polyester-Urethane and Plastic-Bonded Explosives based on This Polymer, J. Appl. Polym. Sci., 83: 1009-1024.
5. Wen, T.C., Du, Y.L. and Digar, M. (2002). Compositional Effect on the Morphology and Ionic Conductivity of Thermoplastic Polyurethane based Electrolytes. Eur. Polym. J., 38 (5). 1039-1048.
6. Sanchez-Aduar, M.S., Papon, E. Villenave, J.J. (2000). Influence of the Synthesis Conditions on the Properties of Thermoplastic Polyurethane Elstomers, J. Appl. Polym. Sci., 76 (10). 1590-1595.
7. Roussos, M., Konstantopoulou, A., Kalogeras, I.M., Kanapitsas, A., Pissis, P., Savelyev, Y. and Vassilikou-Dova, A. (2004). Comparative Dielectric Studies of Segmental Mobility in Novel Polyurethanes, e-Polymers, 042.
8. Mehdipour-Ataei, S. and Zigheimat, F. (2007). Soluble Poly(amide imide)s Containing Oligoether Spacers, Eur. Polym. J., 43 (3). 1020-1026.
9. Yang, Z., Zhang, W., Zou, J. and Shi, W. (2007). Synthesis and Thermally Responsive Characteristics of Dendritic Poly(ether-amide) Grafting with PNIPAAm and PEG, Polymer, 48 (4). 931-938.
10. Mehdipour-Ataei, S., Tadjarodi, A. and Babanzadeh, S. (2007). Novel Ferrocene Modified Poly(amide ether amide)s and Investigation of Physical and Thermal Properties. Eur. Polym. J., 43 (2). 498-506.
11. Sharma, B., Keul, H., Hcker, H., Loontjens, T. and van Benthem, R. (2005). Synthesis and Characterization of Alternating Poly(amide urethane)s from -Caprolactone, Diamines and Diphenyl Carbonate, Polymer, 46 (6). 1775-1783.
12. Scortanu, E., Prisacariu, C., Caraculacu, A.A., Bruma, M. and Sulitanu, N. (2006). New Heterocyclic Polyurethane-ureas based on 4,4'-dibenzyl diisocyanate, Part 1: Influence of Oxadiazole Structure on Mechanical Properties, High Perform. Polym., 18: 127-143.
13. Kaursoin, J. and Agrawal, A.K. (2007). Melt Spun Thermoresponsive Shape Memory Fibers based on Polyurethanes: Effect of Drawing and Heat-Setting on Fiber Morphology and Properties, J. Appl. Polym. Sci., 103 (4). 2172-2182.
14. Prez-Limiana, M.A., Arn-As, F., Torr-Palau, A.M., Orgils-Barcel, C. and Martn-Martnez, J.M. (2006). Structure and Properties of Waterborne Polyurethane Adhesives Obtained by Different Methods, J. Adh. Sci. Tech., 20 (6). 519-536.
15. Korley, L.S.T.J., Pate, B.D., Thomas, E.L., Hammond, P.T. (2006). Effect of the Degree of Soft and Hard Segment Ordering on the Morphology and Mechanical Behavior of Semicrystalline Segmented Polyurethanes, Polymer, 47 (9). 3073-3082.
16. Courtney, T., Sacks, M.S., Stankus, J., Guan, J. and Wagner, W.R. (2006). Design and Analysis of Tissue Engineering Scaffolds That Mimic Soft Tissue Mechanical Anisotropy, Biomaterials, 27 (19). 3631-3638.
17. Bai, C.Y., Zhang, X.Y., Dai, J.B. and Li, W.H. (2006). A New UV Curable Waterborne Polyurethane: Effect of C= C Content on the Film Properties, Prog. Org. Coat., 55 (3). 291-295.
18. Vald, S. (2004). Hydrolytic Stability of Some Thermoplastic Poly(Ether-Urethane-Urea)s, High Perform. Polym., 16: 81-88.
19. Hikita, T., Mochizuki, A., Takeuchi, K., Asai, M. and Ueda, M. (2001). Synthesis and Characterization of Ordered Polyurethanes from Tolylene 2,4-Diisocyanate and Ethylene Glycol, High Perform. Polym., 13: S247 - S255.
20. Sirotinkin, N.V., Voznyakovskii, A.P. and Ershova, A.N. (2004). Model of Formation of Three-Dimensional Polyurethane Films Modified by Detonation Nanodiamonds, Phys. Solid State, 46 (4). 746-747.
21. Legge, N. R., Holden, G. and Schroeder H. E., editors. Thermoplastic Elastomers: a Comprehensive Review, 1 st ed., Chapters 8 and 9, New York, Hanser Publishers, 1987.
22. Martin, D.J., Meijs, G.F., Renwick, G.M., Mccarthy, S.J. and Gunatillake, P.A. (1996). The Effect of Average Soft Segment Length on Morphology and Properties of a Series of Polyurethane Elastomers. I. Characterization of the Sseries, J. Appl. Polym. Sci., 62 (9). 1377-1386.
23. Zuo, M. and Takeichi, T. (1999). Preparation and Characterization of Poly(urethane-imide) Films Prepared from Reactive Polyimide and Polyurethane Prepolymer, Polymer, Volume 40 (18). 5153-5160.
24. Belva, F., Bourbigot, S., Duquesne, S., Jama, C., Le Bras, M., Pelegris, C. and Rivenet, M. (2006). Heat and Fire Resistance of Polyurethane- Polydimethylsiloxane Hybrid Material, Polym. Adv. Tech., 17 (4). 304-311.
25. Yeganeh, H., Barikani, M. and Noei Khodabadi, F. (2000). Synthesis and Properties of Novel Thermoplastic Poly(urethane-imide)s, Eur. Polym. J., 36 (10). 2207-2211.
26. Yeganeh, H. and Shamekhi, M.A. (2004). Poly(urethane-imide-imide), a New Generation of Thermoplastic Polyurethane Elastomers with Enhanced Thermal Stability, Polymer, 45 (2). 359-365.
27. Takeichi, T., Suefuji, K. and Inoue, K. (2002). Preparation of High-Temperature Polyurethane by Alloying with Reactive Polyamide, J. Polym. Sci.: Part A: Polym. Chem., 40 (20). 3497-3503.
28. Onder, K.B., Andrews, P.S. (1980). Thermoplastic Coployamides from 4,4'-Methtlene Bis(phenyl isocyanate), Polym. Prepr. (Div. Polym. Chem. Am. Chem. Soc.), 21 (2). 132-133.
29. Mallakpour, S.E., Hajipour, A.R. and Roohipour-fard, R. (2000). Direct Polycondensation of N-trimellitylimido-L-leucine with Aromatic Diamines, Eur. Polym. J., 36 (11). 2455-2462.
30. Lozinskaya, E.I., Shaplov, A.S. and Vygodskii, Y.S. (2004). Direct Polycondensation in Ionic Liquids, Eur. Polym. J., 40 (9). 2065-2075.
31. Hsiao, S.H. and Chang, Y.H. (2004). New Soluble Aromatic Polyamides Containing Ether Linkages and Laterally Attached p-Terphenyls, Eur. Polym. J., 40 (8). 1749-1757.
32. Otsuki, T., Kakimoto, M., Imai, Y. (1992). Synthesis and Properties of Poly(dimethylsiloxane)-Urea Multiblock Copolymer: Diisocyanate Method, J. Appl. Polym. Sci., 24 (4). 347-355.
33. Mallakpour, S. and Kowsari, E. (2005). Preparation and Characterization of Optically Active and Organo-soluble Poly(amide-imide)s from Polycondensation Reaction of N,N'-(4,4'-Sulphonediphthaloyl)-bis-LIsoleucine Diacid with Aromatic Diamines, Polym. Adv. Tech., 16 (6). 466-472.
34. Otsuki, T., Kakimoto, M.A. and Imai, Y. (1990). Synthesis and Properties of Multibl ock Copolymers based on Polyoxyethylene and Polyamides by Diisocyanate Method, J. Appl. Polym. Sci., 40 (9-10). 1433-1443.
35. Rasmussen, J.K. and Smith II, H. K. (1983). Polyamide-Polyether Copolymers: A New Family of Impact-Resistant Thermoplastics, J. Appl. Polym. Sci., 28 (8). 2473-2482.
36. de Candia, F., Petrocelli, V., Russo, R., Maglio, G. and Palumbo, R. (1986). Synthesis and Physical Behavior of Poly(amidoether) Block Copolymers, Polymer, 27 (5). 797-802.
37. Loupy, A. and Rgnier, S. (1999). Solvent-Free Microwave-Assisted Beckmann Rearrangement of Benzaldehyde and 2-Hydroxyacetophenone Oximes, Tetrahedron Lett., 40 (34). 6221-6224.
38. Chatti, S., Bortolussi, M., Loupy, A., Blais, J.C., Bogdal, D. and Majdoub, M. (2002). Efficient Synthesis of Polyethers from Isosorbide by Microwave-Assisted Phase Transfer Catalysis, Eur. Polym. J., 38 (9): 1851-1861.
39. Hu, Q.S., Sun, C. and Monaghan, C.E. (2001). Synthesis of Optically Active Polymers with Chiral Units Attached to Rigid Backbones and Their Application for Asymmetric Catalysis, Tetrahedron Let., 42 (44). 7725-7728.
40. Okada, M. (2002). Chemical Syntheses of Biodegradable Polymers, Prog. Polym. Sci., 27 (1). 87-133.
41. Sanda, F. and Endo, T. (1999). Syntheses and Functions of Polymers Based on Amino Acids, Macromol. Chem. Phys., 200 (12). 2651-2661.
42. Murata, H., Sanda, F. and Endo, T. (1996). Highly Radical-Polymerizable Methacrylamide Having Dipeptide Structure. Synthesis and Radical Polymerization of N-Methacryloyl-L-leucyl-L-alanine Methyl Ester, Macromolecules, 29 (17). 5535-5538.
43. Mallakpour, S. and Rafiemanelat, F. (2006). Study of the Miscibility of Hard and Soft Segments of Optically Active Poly(amide-imide-ether-urethane) Copolymers based-L-Leucine with Different Soft Segments, Polym. Bull. 56: 9-18.
44. Mallakpour, S.E., A.R. Hajipour and Vahabi, R. (2002). Synthesis and Characterization of Novel Poly(amide imide)s based on Bis(p-amidobenzoic acid)-N-Trimellitylimido-L-leucine, J. Appl. Polym. Sci., 84 (1). 35-43.
45. Quay, J.R., Sun, Z., Blackwell, J., Briber, R.M. and Thomas, E.L. (1990). The Hard Segment Unit Cell for MDI-BDO-based Polyurethane Elastomers, Polymer, 31 (6). 1003-1008.
46. Mallakpour, S. and Rafiemanzelat, F. (2004). Microwave-Assisted and Classical Heating Polycondensation Reaction of Bis(p-amido benzoic acid)-N-Trimellitylimido-L-leucine with Diisocyanates as a New Method for Preparation of Optically Active Poly(amide imide)s, J. Appl. Polym. Sci., 93 (4). 1647-1659.
47. Mallakpour, S. and Rafiemanzelat, F. (2005). Diisocyanate Route as a Convenient Method for the Preparation of Novel Optically Active poly(amide-imide)s based on N-Trimellitylimido-S-valine, Eur. Polym. J., 41 (12). 2945-2955.
48. Seymour, R.W., Estes, G.M. and Cooper, S.L. (1970). Infrared Studies of Segmented Polyurethan Elastomers. I. Hydrogen Bonding, Macromolecules, 3 (5). 579-583.
49. van der Schuur, M., Noordover, B. and Gaymans, R.J. (2006). Polyurethane Elastomers with Amide Chain Extenders of Uniform Length, Polymer, 47 (4). 1091-1100.
50. Vasanthan, N., Shin, I.D. and Tonelli, A.E. (1995). Structure, Conformation, and Motions of Polytetrahydrofuran (PTHF) in the Hexagonal form of the PTHF-Urea Inclusion Compound, J. Polym. Sci.: Part B: Polym. Phys., 33 (9). 1385-1393.
51. Martin, D.J., Meijs, G.F., Renwick, G.M., Gunatillake, P.A. and Mccarthy, S.J. (1996). Effect of Soft-Segment CH2/O Ratio on Morphology and Properties of a Series of Polyurethane Elastomers, J. Appl. Polym. Sci., 60 (4). 557-571.