Rapid nanopaper production by spray deposition of concentrated microfibrillated cellulose slurries

Industrial Crops and Products

Volumn 72, Issue , 2015, Pages 200-205

  Beneventi, Davide ^a,b,c   Zeno, Elisa ^d   Chaussy, Didier ^a,b,c  

^a UNIV GRENOBLE ALPES   (France)

^b CNRS   (France)

^c Laboratory of Pulp and Paper Industry LGP2 UMR CNRS 5518   (France)

^d CENTRE TECHNIQUE DU PAPIER   (France)

Author keywords

Air permeability; Microfibrillated cellulose; Nanopaper; Spray deposition; Tensile properties

Indexed keywords

AIR PERMEABILITY; CELLULOSE; DEPOSITION; ELASTIC MODULI; SLURRIES; TENSILE PROPERTIES; THIN FILMS;

BRITTLE BEHAVIOURS; FILTRATION TIME; MICROFIBRILLATED CELLULOSE; MICROFIBRILLATED CELLULOSE (MFC); NANOPAPER; SPRAY DEPOSITION; STRESS AND STRAIN; YOUNG'S MODULUS;

DEPOSITS;

AIR PERMEABILITY; CELLULOSE; FILTRATION; NANOTECHNOLOGY; NUCLEATION; SLURRY; TENSILE STRESS; YOUNG MODULUS;

EID: 84937866793     PISSN: 09266690     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.indcrop.2014.11.023     Document Type: Article

References (36)

1. Ankerfors M., Lindström T. On the manufacture and uses of nanocellulose. Proceed. 9th Int. Conf. Wood Biofiber Plastic Comp 2007.
2. Aulin C., Gällested M., Lindström T. Oxygen and oil barrier properties of microfibrillated cellulose films and coatings. Cellulose 2010, 17:559-575.
3. Aulin C., Ström G. Multilayered alkyd resin/nanocellulose coatings for use in renewable packaging solutions with a high level of moisture resistance. Ind. Eng. Chem. Res. 2013, 52:2582-2589.
4. Alava M., Niskanen K. The physics of paper. Rep. Prog. Phys. 2006, 69:669-723.
5. Beneventi D., Chaussy D., Curtil D., Zolin L., Bruno E., Bongiovanni R., Destro M., Gerbaldi C., Penazzi N., Tapin-Lingua S. Pilot-scale elaboration of graphite/microfibrillated cellulose anodes for Li-ion batteries by spray deposition on a forming paper sheet. Chem. Eng. J. 2014, 243:372-379.
6. Beneventi D., Chaussy D., Curtil D., Zolin L., Gerbaldi C., Penazzi N. Highly porous paper loading with microfibrillated cellulose by spray coating on wet substrates. Ind. Eng. Chem. Res. 2014, 53:10982-10989.
7. Chen H., Müller M.B., Gilmore J., Wallace G.G., Li D. Mechanically strong, electrically conductive, and biocompatible graphene paper. Adv. Mater. 2008, 20:3557-3561.
8. Chew S.Y., Ng S.H., Wang J., Novak P., Krumeich F., Chou S.L., Chen J., Liu H.K. Flexible free-standing carbon nanotube films for model lithium-ion batteries. Carbon 2009, 47:2976-2983.
9. Chun S-J., Lee S-Y., Doh G-H., Lee D., Kim J.H. Preparation of ultrastrength nanopapers using cellulose nanofibrils. J. Ind. Eng. Chem. 2011, 17:521-526.
10. Eichhorn S.J., Dufresne A., Aranguren M., Marcovich N.E., Capadona J.R., Rowan S.J., Weder C., Thielemans W., Roman M., Renneckar S., Gindl W., Veigel S., Keckes J., Yano H., Abe K., Nogi M., Nakagaito A.N., Mangalam A., Simonsen J., Benight A.S., Bismarck A., Berglund L.A., Peijs T. Review: current international research into cellulose nanofibres and nanocomposites. J. Mater. Sci. 2010, 45:1-33.
11. Eriksen Ø., Gregersen Ø.W., Syverud K. The effect of MFC on handsheet surface and printing properties. Proceed. Progr. Paper Phys. Seminar 2008.
12. Gonzalez I., Alcala M., Chinga-Carrasco G., Vilaseca F., Boufi S., Mutjé P. From paper to nanopaper: evolution of mechanical and physical properties. Cellulose 2014, 21:2599-2609.
13. Gonzalez I., Boufi S., Pelach M.A., Alcala M., Vilaseca F., Mutjé P. Nanofibrillated cellulose as paper additive in eucalyptus pulps. Bioresources 2012, 7:5167-5180.
14. Henriksson M., Berglund L.A. Structure and properties of cellulose nanocomposite films containing melamine formaldehyde. J. Appl. Polym. Sci. 2007, 106:2817-2824.
15. Henriksson M., Berglund L.A., Isakson P., Lindström T., Nishino T. Cellulose nanopaper structures of high toughness. Biomacromolecules 2008, 9:1579-1585.
16. Hii C., Gregersen Ø.W., Chinga-Carrasco G., Eriksen Ø. The effect of MFC on the processability and paper properties of TMP and GCC based sheets. Nord. Pulp Pap. Res. J. 2012, 27:388-396.
17. Huang B., Hill R., van de Ven T. Nanopaper: thin films prepared from polymeric nanotubes. Macromol. Mater. Eng. 2012, 297:821-830.
18. Hult E., Iotti M., Lenes M. Efficient approach to high barrier packaging using microfibrillar cellulose and shellac. Cellulose 2010, 17:575-586.
19. Kulachenko A., Denoyelle T., Galland S., Lindström S.B. Elastic properties of cellulose nanopaper. Cellulose 2012, 19:793-807.
20. Lavoine N., Desloges I., Dufresne A., Bras J. Microfibrillated cellulose-its barrier properties and applications in cellulosic materials: a review. Carbohydr. Polym. 2012, 90:735-764.
21. Lu H., Gou J. Fabrication and electroactive responsive behaviour of shape-memory nanocomposite incorporated with self-assembled multiwalled carbon nanotube paper. Polym. Adv. Technol. 2011, 23:1529-1535.
22. Lu H., Liang F., Gou J. Nanopaper enabled shape-memory nanocomposite with vertically aligned nickel nanostrand: controlled synthesis and electrical actuation. Soft Matter 2011, 7:7416-7423.
23. Lu H., Liang F., Gou J., Huang W.M., Leng J. Synergistic effect of self-assembled carbon nanopaper and multi-layered interface on shape memory nanocomposite for high speed electrical actuation. J. Appl. Phys. 2014, 115:064907.
24. Meyer V., Tapin-Lingua S., Da Silva Perez D., Arndt T., Kautto J. Technical opportunities and economic challenges to produce nanofibrillated cellulose in pilot scale: NFC delivery for applications in demonstrations trials. Proceed. SUNPAP EU Project-Final Conference 2012, http://sunpap.vtt.fi/finalconference2012.htm.
25. Missoum K., Martoïa F., Belgacem M.N., Bras J. Effect of chemically modified nanofibrillated cellulose addition on the properties of fiber-based materials. Ind. Crops Prod. 2013, 48:98-105.
26. Ng S.H., Wang J., Guo Z.P., Chen J., Wang G.X., Liu H.K. Single wall carbon nanotube paper as anode for lithium-ion battery. Electrochim. Acta 2005, 51:23-28.
27. Österberg M., Vartiainen J., Lucenius J., Hippi U., Seppälä J., Serimaa R., Laine J. A fast method to produce strong NFC films as a platform for barrier and functional materials. Appl. Mater. Interfaces 2013, 5:4640-4647.
28. Pääkkö M., Ankerfors M., Kosonen H., Nykanen A., Ahola S., Osterberg M., Ruokolainen J., Laine J., Larsson P.T., Ikkala O., Lindström T. Enzymatic hydrolysis combined with mechanical shearing and high-pressure homogenization for nanoscale cellulose fibrils and strong gels. Biomacromolecules 2007, 8:1934-1941.
29. Sehaqui H., Liu A., Zhou Q., Berglound L.A. Fast preparation procedure for large, flat cellulose and cellulose/inorganic nanopaper structures. Biomacromolecules 2010, 11:2195-2198.
30. Siro I., Plackett D. Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 2010, 17:459-494.
31. Su J., Wade K., Mosse J., Sharman S., Batchelor W.J., Garnier G. Effect of tethered and free microfibrillated cellulose (MFC) on the properties of paper composites. Cellulose 2013, 20:1925-1935.
32. Syverud K., Stenius P. Strength and barrier properties of MFC films. Cellulose 2009, 16:75-85.
33. Taipale T., Östertberg M., Nykänen A., Ruokolainen J., Laine J. Effect of microfibrillated cellulose and fines on the drainage of kraft pulp suspension and paper strength. Cellulose 2010, 17:1005-1020.
34. Turbak A., Snyder F., Sandberg K. Microfibrillated cellulose, a new cellulose product: properties uses and commercial potential. J. Appl. Polym. Sci. Appl. Polym. Symp. 1983, 37:815-827.
35. Varanasi S., Batchelor W.J. Rapid preparation of cellulose nanofibre sheet. Cellulose 2013, 20:211-215.
36. Zhang L., Batchelor W., Varanasi S., Tsuzuki T., Wang X. Effect of cellulose nanofiber dimensions on sheet forming through filtration. Cellulose 2012, 19:561-574.