Green synthesis of polymer composites/nanocomposites using vegetable oil

Advanced Structured Materials

Volumn 75, Issue , 2015, Pages 495-511

  Roopan, Selvaraj Mohana ^a   Madhumitha, Gunabalan ^a  

^a VIT UNIVERSITY   (India)

Author keywords

Industrial and biomedical application; Polymer composites; Vegetable oil

Indexed keywords

EID: 84934901323     PISSN: 18698433     EISSN: 18698441     Source Type: Book Series    
DOI: 10.1007/978-81-322-2470-9_16     Document Type: Article

References (85)

1. Arrakhiz FZ, Achaby ME, Malha M, Bensalah MO, Fassi F, Bouhfid R, Benmoussa K, Qaiss A (2013) Mechanical and thermal properties of natural fibers reinforced polymer composites: doum/low density polyethylene. Mater Des 43:200-205
2. Baillie C (2004) Green composites: polymer composites and the environment. Woodhead Publishing
3. Bantchev GB, Kenar JA, Biresaw G, Han MG (2009) Free radical addition of butanethiol to vegetable oil double bonds. J Agri Food Chem 57:1282-1290
4. Barnwal BK, Sharma MP (2005) Prospects of biodiesel production from vegetable oils in India. Renew Sustain Energy Rev 9:363-378
5. Beauty D, Pronobesh C, Manabendra M, Brigitte V, Niranjan K (2013) Bio-based biodegradable and biocompatible hyperbranched polyurethane: a scaffold for tissue engineering. MacromolBiosci 13:126-139
6. Belgacem MN, Gandini A (2008) Monomers, polymers and composites from renewable resources. Elsevier, Amsterdam. ISBN 978-0-08-045316-3
7. Biermann U, Friedt W, Lang S, Luhs W, Machmuller G, Metzger JO, Klass MR, Schafer HJ, Schneider MP (2000) New syntheses with oils and fats as renewable raw materials for the chemical industry. Angew Chem Int Ed 39:2206-2224
8. Bussell GW (1974) US Patent, 3,855,163
9. Cathryn AS, Jeffery YS, Yadong W, William CF, Robert SL, Joseph PV, Tessa AH (2005) Biocompatibility analysis of poly (glycerol sebacate) as a nerve guide material. Biomater 26:5454-5464
10. Çayl G, Kusefoglu S (2008) Biobasedpolyisocyanates from plant oil triglycerides: synthesis, polymerization, and characterization. J Appl Polym Sci 109:2948-2955
11. Chen Z, Chisholm BJ, Patani R, Wu JF, Fernando S, Jogodzinski K (2010) Soybased UV-curable thiol-ene coatings. J Coat Technol Res 7:603-613
12. Cinita M, Diego M, Kleber RP, Mirta IA, Mirna AM (2014) Nanocomposites with superparamagneticbehavior based on a vegetable oil and magnetite nanoparticles. Euro Poly J 53:90-99
13. Cunningham A, Yapp A (1974) US Patent, 3,827,993
14. Dave AM, Mehta MH, Aminabhavi TM, Kulkarni AR, Soppimath KS (1999) A review on controlled release of nitrogen fertilizers through polymeric membrane devices. Polym-plast technol 38:675-711
15. Delara M, Jian Y, Karen YL, Antonio RW, Guillermo AA (2006) Hemocompatibility evaluation of poly(glycerol-sebacate) in vitro for vascular tissue engineering. Biomater 27:4315-4324
16. Dyer JM, Stymme S, Green AG, Carlsson AS (2008) High-value oils from plants. Plant J 54:640- 655
17. Force CG, Starr FS (1988) US Patent, 4,740,367
18. Frederick T, Wallenberger T, Norman E (2004) Natural fibers, plastics and composites. Springer
19. Friedrich K, Lu Z, Hager AM (1995) Recent advances in polymer composites' tribology. Wear 190:139-144
20. Gallezot P (2012) Conversion of biomass to selected chemical products. Chem Soc Rev 41:1538- 1558
21. Gerard L, Juan CR, Marina G, Virginia C (2013) Renewable polymeric materials from vegetable oils: a perspective. doi:10.1016/j.mattod.2013.08.016
22. Gonzalez-Paz R, Lluch C, Lligadas G, Ronda J, Galia M, Cadiz V (2011) A green approach toward oleic- and undecylenic acid-derived polyurethanes. J Polym Sci Pol Chem 49:2407-2416
23. Gorkum R, Bouwman E (2005) The oxidative drying of alkyd paint catalyzed by metal complexes. Coord Chem Rev 249:1709-1728
24. Guner FS, Yagci Y, Erciyes AT (2006) Polymers from triglycerides oils. Prog Poly Sci 31:633-670
25. Hodakowski LE, Osborn CL, Harris EB (1975) US Patent, 4,119,640
26. Hojabri L, Kong X, Narine SS (2009) Fatty acid-derived diisocyanate and biobased polyurethane produced from vegetable oil: synthesis, polymerization, and characterization. Biomacromolecules 10:884-891
27. Hojabri L, Kong X, Narine SS (2010a) Novel long chain unsaturated diisocyanate from fatty acid: synthesis, characterization, and application in bio-based polyurethane. J Polym Sci Pol Chem 48:3302-3310
28. Hojabri L, Kong X, Narine SS (2010b) Functional thermoplastics from linear diols and diisocyanates produced entirely from renewable lipid sources. Biomacromolecules 11:911-918
29. Johannes TP, Derksen F, Petrus C, Peter K (1996) Renewable resources in coatings technology: a review. Progress Org Coat 27:45-53
30. Johnson RW, Fritz EE (1989) Fatty acids in industry. New York
31. Kymakis E, Alexandou I, Amaratunga GAG (2002) Single- walled carbon nanotube- polymer composites: electrical optical and structural investigations. Synth Met 127:50-62
32. Lamba NM, Woodhouse KA, Cooper SL (1998) Polyurethanes in biomedical applications. CRC Press, Boca Raton, FL
33. Lin M-F, Thakur VK, Tan EJ, Lee PS (2011a) Dopant induced hollow BaTiO3 nanostructures for application in high performance capacitors. J Mater Chem 21:16500-16504
34. Lin M-F, Thakur VK, Tan EJ, Lee PS (2011b) Surface functionalization of BaTiO3 nanoparticles and improved electrical properties of BaTiO3/polyvinylidene fluoride composite. RSC Adv 1:576-578
35. Lluch C, Ronda JC, Galia M, Lligadas G, Cadiz V (2010) Rapid approach to biobased telechelics through two one-pot thiol-ene click reactions. Bio mac mol 11:1646-1653
36. Lu Y, Larock RC (2009) Novel polymeric materials from vegetable oils and vinyl monomers: preparation, properties, and applications. Chem Sus Chem 2:136-147
37. Meier MAR, Metzger JO, Schubert US (2007) Plant oil renewable resources as green alternatives in polymer science. Chem Sus Rev 36:1788-1802
38. Mikitaev A, Alexey KR, Elena GN (2009) Polymer nanocomposites: variety of structural forms and applications. Nova Science Publishers, 319 pp
39. Mohammad YS, Sharif A (2012) Waterborne vegetable oil epoxy coatings: Preparation and characterization. Prog Org Coat 75:248-252
40. More AS, Lebarbé T, Maisonneuve L, Gadenne B, Alfos C, Cramail H (2013) Novel fatty acid based di-isocyanates towards the synthesis of thermoplastic polyurethanes. Eur Polym J 49:823-833
41. Mosiewicki MA, Aranguren MI (2013) A short review on novel biocomposites based on plant oil Precursors. Eur Polym J 44:1243-1256
42. Norris FA (1996) Extraction of fats and oils. Bailey's industrial oil and fat products. vol 2. New York
43. Okada A, Usuki A (1995) The chemistry of polymer-clay hybrids. Mat Sci Engg C3:109-115
44. Reis JML, Mota EP (2014) Mechanical behaviour of piassava fiber reinforced castor oil polymer mortars. Comp Strut 111:468-472
45. Salunkhe DK, Chavan JK, Adsule RN, Kadam SS (1992) World oilseeds: chemistry, technology and utilization. Van Nostrand Reinhold, New York
46. Seniha GN, Yusuf Y, Tuncer E (2014) Polymers from triglyceride oils. Sep Purify Technol 133:260-275
47. Sharma V, Kundu PP (2006) Addition polymers from natural oils-a review. Prog Poly Sci 31:983-1008
48. Shida M, Lijing S, Ping W, Ruina L, Zhiguo S, Songping Z (2012) Soybean oil-based polyurethane networks as candidate biomaterials: Synthesis and biocompatibility. Euro J Lipid Sci Tech 114:1165-1174
49. Shida M, Ping W, Zhiguo S, Songping Z (2014) Vegetable-oil-based polymers as future polymeric biomaterials. Acta Biomater 10:1692-1704
50. Singha AS, Thakur VK (2008a) Saccaharum cilliare fiber reinforced polymer composites. E-J Chem 5(4):782-791
51. Singha AS, Thakur VK (2008b) Fabrication and study of lignocellulosic hibiscus sabdariffa fiber reinforced polymer composites. Bioresources 3:1173-1186
52. Singha AS, Thakur VK (2008c) Synthesis and characterization of pine needles reinforced rf matrix based biocomposites. E-J Chem 5:1055-1062
53. Singha AS, Thakur VK (2009a) Fabrication and characterization of H. Sabdariffa fiber-reinforced green polymer composites. Polym-Plast Technol Eng 48:482-487
54. Singha AS, Thakur VK (2009b) Fabrication and characterization of S. Cilliare fibre reinforced polymer composites. Bull Mater Sci 32:49-58
55. Singha AS, Thakur VK (2009c) Synthesis, characterisation and analysis of hibiscus sabdariffa fibre reinforced polymer matrix based composites. Polym Polym Compos 17:189-194
56. Singha AS, Thakur VK (2009d) Grewia optiva fiber reinforced novel, low cost polymer composites. J Chem 6:71-76
57. Singha AS, Thakur VK (2009e) Physical, chemical and mechanical properties of hibiscus sabdariffa fiber/polymer composite. Int J Polym Mater 58:217-228
58. Singha A S, Thakur VK (2010a) Mechanical, morphological, and thermal characterization of compression-molded polymer biocomposites. Int J Polym Anal Charact 15(2):87-97
59. Singha AS, Thakur VK (2010b) Synthesis, characterization and study of pine needles reinforced polymer matrix based composites. J Reinf Plast Compos 29:700-709
60. Singha AS, Thakur VK, Mehta IK, Shama A, Khanna AJ, Rana RK, Rana AK (2009) Surfacemodified hibiscus sabdariffa fibers: physicochemical, thermal, and morphological properties evaluation. Int J Polym Anal Charact 14(8):695-711
61. Sinha VR, Kumria R (2001) Polysaccharides in colon-specific drug delivery. Int J Pharm 224:19-38
62. Stephen R, William LN, Santiago R, Sunita S, Jing Y, Henry K, Robert L, Michael JY (2009) Engineering retinal progenitor cell and scrollable poly (glycerol-sebacate) composites for expansion and subretinal transplantation. Biomater 30:3405-3414
63. Thakur VK, Thakur MK (2014a) Recent advances in graft copolymerization and applications of chitosan: a review. ACS Sustain Chem Eng 2:2637-2652
64. Thakur VK, Thakur MK (2014b) Recent trends in hydrogels based on psyllium polysaccharide: a review. J Cleaner Prod 82:1-15
65. Thakur VK, Thakur MK (2014c) Processing and characterization of natural cellulose fibers/ thermoset polymer composites. Carbohydr Polym 109:102-117
66. Thakur VK, Singha AS, Kaur I, Nagarajarao RP, Liping Y (2010a) Silane functionalization of Saccaharum cilliare fibers: thermal, morphological, and physicochemical study. Int J Polym Anal Charact 15(7):397-414
67. Thakur VK, Singha AS, Mehta I K (2010b) Renewable resource-based green polymer composites: analysis and characterization. Int J Polym Anal Charact 15(3):137-146
68. Thakur VK, Singha AS, Thakur MK (2012a) In air graft copolymerization of ethyl acrylate onto natural cellulosic polymers. Int J Polym Anal Charact 17(1):48-60
69. Thakur VK, Singha AS, Thakur MK (2012b) Surface modification of natural polymers to impart low water absorbency. Int J Polym Anal Charact 17:133-143
70. Thakur VK, Singha AS, Thakur MK (2012c) Biopolymers based green composites: mechanical, thermal and physico-chemical characterization. J Polym Environ 20:412-421
71. Thakur VK, Singha AS, Thakur MK (2012d) Graft copolymerization of methyl acrylate onto cellulosic biofibers: synthesis, characterization and applications. J Polym Environ 20:164-174
72. Thakur VK, Thunga M, Madbouly SA, Kessler MR (2014a) PMMA-g-SOY as a sustainable novel dielectric material. RSC Adv 4:18240-18249
73. Thakur VK, Grewell D, Thunga M, Kessler MR (2014b) Novel composites from eco-friendly soy flour/SBS triblock copolymer. Macromol Mater Eng 299:953-958
74. Thakur VK, Vennerberg D, Kessler MR (2014c) Green aqueous surface modification of polypropylene for novel polymer nanocomposites. ACS Appl Mater Interfaces 6:9349-9356
75. Thakur VK, Vennerberg D, Madbouly SA, Kessler MR (2014d) Bio-inspired green surface functionalization of PMMA for multifunctional capacitors. RSC Adv 4:6677-6684
76. Thakur VK, Thakur MK, Gupta RK (2014e) Review: raw natural fiber-based polymer composites. Int J Polym Anal Charact 19(3):256-271
77. Thakur VK, Thakur MK, Raghavan P, Kessler M R (2014f) Progress in green polymer composites from lignin for multifunctional applications: a review. ACS Sustain Chem Eng 2(5):1072-1092
78. Trecker DJ, Borden GW, Smith OW (1976) US Patent, 3,931,075
79. Turunc O, Meier MA (2010) Fatty acid derived monomers and related polymers via thiol-ene (Click) additions. Macromol Rapid Commun 31:1822-1826
80. Vaidya R (2012) International conference on environmental. Biomed Biotech 41:55
81. Wang L, Wang T (2007) Chemical modification of partially hydrogenated vegetable oil to improve its functional properties for candles. J American Oil Chem Soc 84:1149-1159
82. Williams CK, Hillmyer MA (2008) Polymers from renewable resources: a perspective for a special issue of polymer reviews. Polym Rev 48:1-10
83. Xia Y, Larock RC (2010) Vegetable oil-based polymeric materials: synthesis, properties, and applications. Green Chem 1893-1909
84. Yongshang L, Richard CL (2007) New hybrid latexes from a soybean oil-based waterborne polyurethane and acrylics via emulsion polymerization. Biomacro 8:3108-3144
85. Zdrahala RJ, Zdrahala IJ (1999) Biomedical applications of polyurethanes: a review of past promises, present realities, and a vibrant future. J Biomater Appl 14:67-90