Polymers from triglyceride oils

Progress in Polymer Science (Oxford)

Volumn 31, Issue 7, 2006, Pages 633-670

  Seniha Guner F ^a   Yaǧci, Yusuf ^a   Tuncer Erciyes, A ^a  

^a ISTANBUL TECHNICAL UNIVERSITY   (Turkey)

Author keywords

Composites; Inorganic organic hybrid materials; Oxypolymerized oils; Polymers; Renewable sources; Triglyceride oils

Indexed keywords

CHEMICAL MODIFICATION; COMPOSITE MATERIALS; ENVIRONMENTAL IMPACT; OILS AND FATS; RENEWABLE ENERGY RESOURCES; SYNTHESIS (CHEMICAL);

INORGANIC-ORGANIC HYBRID MATERIALS; OXYPOLYMERIZED OILS; TRIGLYCERIDE OILS;

POLYMERS;

EID: 33748602648     PISSN: 00796700     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.progpolymsci.2006.07.001     Document Type: Review

References (215)

1. Johnson R.W., and Fritz E. Fatty acids in industry (1989), Marcel Dekker, New York
2. Deligny P., and Tuck N. Alkyds and polyesters. In: Oldring P.K.T. (Ed). Resins for surface coatings vol. II (2000), Wiley, New York and references cited therein
3. Bailey A.E. Bailey' s industrial oil and fat products (1996), Wiley, New York
4. Wool R P., Knot S.N., LaScala J.J., Bunker S.P., Lu J., et al. Affordable composites and plastics from renewable resources: part 1: synthesis of monomers and polymers. Advancing sustainability through green chemistry and engineering. ACS Symp Ser 823 (2002) 177-204
5. Blayo A., Gandini A., and Le Nest J F. Chemical and rheological characterizations of some vegetable Oils derivatives commonly used in printing inks. Ind Crops Prod 14 (2001) 155-167
6. Mallégol J., Lemaire J., and Gardette J L. Drier influence on the curing of linseed oil. Prog Org Coat 39 (2000) 107-113
7. Hess P S., and O'Hare G A. Oxidation of linseed oil. Ind Eng Chem 42 7 (1950) 1424-1431
8. Taylor W.L. Blowing drying oils. J Am Oil Chem Soc (1950) 472-476
9. Yi{dotless}ldi{dotless}z G., Wehling R L., and Cuppet S L. Method for determining oxidation of vegetable oils by near-infrared spectroscopy. J Am Oil Chem Soc 78 5 (2001) 495-502
10. Asadauskas S., and Erhan S Z. Thin-film test to investigate liquid oxypolymerization of nonvolatile analytes. J Am Oil Chem Soc 78 10 (2001) 1029-1035
11. Güner F S., Erciyes A T., Kabasakal O S., and Yagci Y. New aspects on the modification of triglyceride oils. In: Pandalai S.G. (Ed). Recent Research Developments in Oil Chemistry vol. 2 (1998), Transworld Research Network, India 31-51
12. Güler O.K., Güner F.S., and Erciyes A.T. Some empirical equations for oxypolymerization of linseed oil. Prog Org Coat 51 (2004) 365-371
13. 2. Chem Eng Process 43 (2004) 1015-1027
14. Slivniak R., and Domb A.J. Lactic acid and ricinoleic acid based copolymers. Macromolecules 38 (2005) 5545-5553
15. Nair M.N., Unnikrishnan K.G., Unnikrishnan M., and Nair C.S.B. Utilization of rubber seed oil and karinnotta oil for preparation of air-drying oil-modified alkyd resins. Paintindia 31 5 (1881) 5-9
16. Khandelwal S.M., and Gogte B. Alkyds from orangeseed Oil. Paintindia 26 9 (1976) 15-18
17. Igwe I.O., and Ogbobe O. Studies on the properties of polyester and polyester blends of selected vegetable oils. J Appl Polym Sci 75 (2000) 1441-1446
18. Sabin P., Benjelloun-mlayah B., and Delmas M. Offset printing inks based on rapeseed and sunflower oil. Part I-synthesis and characterization of rapeseed oil- and sunflower oil-modified alkyd resins. J Am Oil Chem Soc 74 (1997) 481-489
19. Sabin P., Benjelloun-Mlayah B., and Delmas M. Offset printing inks based on rapeseed and sunflower oil. Part II-varnish and ink formulation. J Am Oil Chem Soc 74 (1997) 1227-1233
20. Aydi{dotless}n S., Akçay H., Özkan E., Güner F.S., and Erciyes A.T. The effects of anhydride type and amount on viscosity and film properties of alkyd resin. Prog Org Coat 51 (2004) 273-279
21. Chiang W.Y., and Yan C.S. Preparation and properties of liquid crystalline alkyd resin with para-hydroxybenzoic acid mesogenic side chain. J Appl Polym Sci 46 (1992) 1279-1290
22. Chen D.S., and Jones F.N. Binders for higher-solids coatings, part III-model alkyd resins modified by liquid crystalline groups. J Coat Technol 60 756 (1988) 39-45
23. Kangas L.S., and Jones F.N. Binders for higher-solids coatings, part I-synthesis of model alkyd resins. J Coat Technol 59 744 (1987) 89-97
24. Kangas L.S., and Jones F.N. Binders for higher-solids coatings, part II-properties of model alkyd resins. J Coat Technol 59 744 (1987) 99-103
25. Manczyk K., and Szewczyk P. Highly branched high solids alkyd resins. Prog Org Coat 44 (2002) 99-109
26. Bergenstahl B., Hofland A., Ostberg G., and Larson A. Alkyd emulsions. In: Salamone J.C. (Ed). Polymeric materials encyclopedia vol. 1 (1996), CRC Press, New York 154-160
27. Hofland A. Water-borne coatings for decorative and protective coatings-A comparative survey. Surf Coat Int 7 (1994) 270-281
28. Rødsrud G., and Sutcliffe J.E. Alkyd emulsions-properties and applications/results from comperative investigations of penetrating and ageing of alkyds, alkyd emulsions and acrylic dispersions. Surf Coat Int 1 (1994) 7-16
29. Aigbodion A.I., Okieimen F.E., Obazee E.O., and Bakare I.O. Utilisation of maleinized rubber seed oil and its alkyd resin as binders in water-borne coatings. Prog Org Coat 46 (2003) 28-31
30. Nakayama Y. Polymer blend systems for water-borne paints. Prog Org Coat 33 (1998) 108-116
31. Braunegg G., Lefebvre G., and Genser K.F. Polyhydroxyalkanoates, biopolyesters from renewable resources-physiological and engineering aspects. J Biotechnol 65 (1998) 127-161
32. Ashby R.D., Cromwick A., and Foglia T.A. Radiation crosslinking of a bacteria medium-chain-length poly(hydroxyalkanoate) elastomers from tallow. Int J Biol Macromol 23 (1998) 61-72
33. Poirier Y. Production of new polymeric compounds in plants. Curr Opin Microbiol 10 (1999) 181-185
34. van der Walle G.A.M., Buisman G.J.H., Weusthuis R.A., and Eggink G. Development of environmentally friendly coatings and paints using medium-chain-length poly(3-hydroxyalkanoates) as the polymer binder. Int J Biol Macromol 25 (1999) 123-128
35. Ashby R.D., Foglia T.A., Solaiman D.K.Y., Liu C., Nunez A., and Eggink G. Viscoelastic properties of linseed oil-based medium chain length poly(hydroxyalkanoate) films-effect of epoxidation and curing. Int J Biol Macromol 27 (2000) 355-361
36. Shiotani ST, Kobayashi G. JPN patent application no 93049, 1993.
37. Eggink G., de Waard P., and Huijberts G.N.M. Formation of novel poly(hydroxyalkanoates) from long-chain fatty acids. Can J Microbial 41 (1995) 14-21
38. Cromwick A.M., Foglia T., and Lenz R.W. The microbial production of poly(hydroxyalkanoates) from tallow. Appl Microbiol Biotechnol 46 (1996) 464-469
39. Ashby R.D., and Foglia T.A. Poly(hydroxyalkanoate) biosynthesis from triglyceride substrates. Appl Microbial Biotechnol 49 (1998) 431-437
40. Hazer B., Demirel S.I., Borcakli M., Eroglu M.S., Cakmak M., and Erman B. Free radical crosslinking of unsaturated bacterial polyesters obtained from soybean oily acids. Polym Bull 46 (2001) 394-398
41. Casini E., deRijk T.C., deWaard P., and Eggink G. Synthesis of poly(hydroxyalkanoates) from hydrolyzed linseed oil. J Environ Polym Degrad 5 3 (1997) 153-158
42. Hazer B., Torul O., Borcakli M., Lenz R.W., Fuller R.C., and Goodwin S.D. Bacterial production of polyesters from free fatty acids obtained from natural oils by Pseudomonas oleovorans. J Environ Polym Degrad 6 2 (1998) 109-113
43. Güner F.S., Gümüsel A., Cali{dotless}ca S., and Erciyes A.T. Study of film properties of some urethane oils. J Coat Technol 74 929 (2002) 55-59
44. Güner F.S., Baranak M., Soytaş S., and Erciyes A.T. Flow behavior of oil-modified polymer solutions. Prog Org Coat 50 (2004) 172-178
45. Erciyes A.T., Erkal F.S., and Kabasakal O.S. Investigation of urethane oils based on Ecballium elaterium and P. mahaleb. Seed Oils. J Coat Technol 64 815 (1992) 61-64
46. Ozkaynak M.U., Atalay-Oral C., Tantekin-Ersolmaz S.B., and Güner F.S. Polyurethane films for wound dressing applications. Macromol Symp 228 (2005) 177-184
47. Yeganeh H., and Mehdizadeh M.R. Synthesis and properties of isocyanate curable millable polyurethane elastomers based on castor oil as a renewable resource polyol. Eur Polym J 40 (2004) 1233-1238
48. Gündüz G., Khalid A.H., Mecidoǧlu A., and Aras L. Water-borne and air-drying oil-based resins. Prog Org Coat 49 (2004) 259-269
49. Klempner D, Frisch K. Advances in interpenetrating polymer networks technomic Lancaster, vol. II, PA, 1990.
50. Fried R.J. Polymer science and technology. 2nd ed (2003), Pearson Education, New Jersey
51. Sperling L.H., and Manson J.A. Interpenetrating polymer networks from triglyceride oils containing special functional groups-a brief review. J Am Oil Chem Soc 60 11 (1983) 1887-1892
52. Yenwo G.M., Manson J.A., Puido J., and Sperling L.H. Castor oil-based interpenetrating polymer networks-synthesis and characterization. J Appl Polym Sci 21 (1977) 1531-1541
53. Yenwo G.M., Sperling L.H., Puido J., Manson J.A., and Conde A. Castor oil-based interpenetrating polymer networks. 4. Mechanical behavior. Polym Eng Sci 17 (1977) 251-256
54. Devia N., Manson J.A., Sperling L.H., and Conde A. Simultaneous interpenetrating networks based on castor oil elastomers and polystyrene-4-stress-strain and impact loading behavior. Polym Eng Sci 19 12 (1979) 878-882
55. Devia N., Manson J.A., Sperling L.H., and Conde A. Simultaneous interpenetrating polymer networks based on castor oil elastomers and polystyrene-3-morphology and glass transition behavior. Polym Eng Sci 19 12 (1979) 869-877
56. Kumar V.G., Rama Rao M., Guruprasad T.R., and Rao K.V.C. Correlation of mechanical property, crosslink density and thermogravimetric behavior of castor oil polyurethane-polystyrene divinyl benzene simultaneous IPN networks. J Appl Polym Sci 34 5 (1987) 1803-1815
57. Siddaramaiah M.P., and Varadarajulu A. Interpenetrating polymer networks from castor oil-based polyurethane and polystyrene. Polym Degrad Stab 63 2 (1999) 305-309
58. Bai S., Khakhar D.V., and Nadkarni V.M. Mechanical properties of simultaneous interpenetrating polymer networks of castor oil-based polyurethane and polystyrene. Polymer 38 17 (1997) 4319-4323
59. Bhikhu S., Parikh N., and Patel N. Study of mechanical properties and morphology of interpenetrating polymer networks from castor oil based polyurethane and polystyrene. Polym Int 25 3 (1991) 173-177
60. Siddaramaiah M.P., and Somashekar R. Characterization of castor oil-based interpenetrating polymer networks of PU/PS. J Appl Polym Sci 68 11 (1998) 1739-1743
61. Siddaramaiah K.H., Roopa S., Kendagannaswamy B.K., and Aminabhavi T.M. Computer simulation method for calculating concentration profiles in polyurethane/polystyrene interpenetrating polymer network membranes. J Appl Polym Sci 90 1 (2003) 122-128
62. Suthar B., Jadav K., and Dave M. Interpenetrating polymer networks from castor oil-based polyurethanes and polystyrene. Polym Int 34 3 (1994) 267-272
63. Devia N., Manson J.A., Sperling L.H., and Conde A. Simultaneous interpenetrating networks based on castor oil elastomers and polystyrene. V. Behavioral trends and analysis. J Appl Polym Sci 24 2 (1979) 569-582
64. Suthar B., Klempner D., Frisch K., Petrovic Z., and Jelcic Z. Novel dielectrics from IPNs derived from castor oil based polyurethanes. J Appl Polym Sci 53 8 (1994) 1083-1090
65. Yenwo G.M., Manson J.A., Pulido J., Sperling L., Conde A., and Devia N. Castor oil-based interpenetrating polymer networks: synthesis and characterization. J Appl Polym Sci 21 6 (1977) 1531-1541
66. Patel P., and Suthar B. Interpenetrating polymer networks from castor oil-based polyurethanes and polymethacrylate. J Polym Sci A 27 9 (1989) 3053-3062
67. Patel M., and Suthar B. Interpenetrating polymer networks from castor oil-based poly(methyl methactylate)-V. J Polym Sci A 25 8 (1987) 2251-2260
68. Zhang L., and Ding H. Study on the properties, morphology, and applications of castor oil polyurethane-poly(methyl methacrylate) IPNs. J Appl Polym Sci 64 7 (1997) 1393-1401
69. 3 superfine fiber/castor oil polyurethane-based IPN nanocomposites. J Appl Polym Sci 84 4 (2002) 709-715
70. Siddaramaiah T.J. Synthesis and characterization of polyaniline filled PU/PMMA interpenetrating polymer networks. Eur Polym J 39 (2003) 569-578
71. Parida D., Nayak P., Mishra D.K., Lenka S., Nayak P.L., Mohanty S., et al. Polymers from renewable resources-VIII thermal properties of the interpenetrating polymer networks derived from castor oil-isophorone diisocyanate-polyacrylamides. J Appl Polym Sci 56 13 (1995) 1731-1738
72. Nayak P., Mishra D.K., Sahoo K.C., Pati N.C., Jena P.K., Lenka S., et al. Polymers from renewable resources-XIII interpenetrating polymer networks derived from castor oil-hexamethylene diisocyanate and polymethacrylamide. J Appl Polym Sci 80 9 (2001) 1349-1353
73. Parida D., Lenka S., and Nayak P.L. Polymers from renewable resources-IV castor oil-based interpenetrating polymer networks derived from isophorone diisocyanate poly(acrylamide) and poly(methacrylamide). J Macromol Sci-Pure and Appl Chem A32 7 (1995) 1365
74. Patel P., Shah T., and Suthar B. Interpenetrating polymer networks based on castor oil. J Appl Polym Sci 40 5-6 (1990) 1037-1047
75. Patel P., and Suthar B. Interpenetrating polymer networks from castor oil-based polyurethanes and poly(ethyl methactylate) XVII. Polymer 31 2 (1990) 339-343
76. 4/complexes as phase transfer catalyst and ionic conductors. J Appl Polym Sci 90 3 (2003) 830-836
77. Nayak P.L., Lenka S., Sanda P., Santosh K., and Pattnaik T. Polymers from renewable resources-I castor oil-based interpenetrating polymer networks/thermal and mechanical properties. J Appl Polym Sci 47 6 (1993) 1089-1096
78. Nayak P., Mishra D.K., Parida D., Sahoo K.C., Nanda M., and Lenka S. Polymers from renewable resources-IX interpenetrating polymer networks based on castor oil polyurethane poly(hydroxyethyl methacrylate)/synthesis, chemical, thermal and mechanical properties. J Appl Polym Sci 63 5 (1997) 671-679
79. Patel P., and Suthar B. Interpenetrating polymer networks from castor oil-based polyurethanes. Polym Eng Sci 28 14 (1988) 901-905
80. Siddaramaiah M.P., and Somashekar R. Synthesis and characterization of castor oil based polyurethane-polyacrylonitrile interpenetrating polymer networks. Bull Mater Sci 23 5 (2000) 413-418
81. Patel M., and Suthar B. Interpenetrating polymer networks based on castor oil IX. Polym J 20 1 (1988) 1-8
82. Suthar B., Jadav K., and Dave M. Room temperature kinetics of castor oil-based polyurethane/poly(2-hydroxyethyl methacrylate) interpenetrating polymer networks. J Appl Polym Sci 54 8 (1994) 1127-1130
83. Das S.K., and Lenka S. Interpenetrating polymer networks composed of castor oil-based polyurethanes and 2-hydroxy-4-methacryloyloxy acetophenone. J Appl Polym Sci 75 12 (2000) 1487-1493
84. Das D., Nayak S.S., Das S.K., and Nayak P.L. Polymers from renewable resources: studies on synthesis and thermal properties of interpenetrating polymer networks derived from castor oil-isophorone diisocyanate-cardanyl methacrylate/ poly(cardanyl methacrylate). Thermochim Acta 297 1-2 (1997) 101-107
85. Patel P., and Suthar B. Interpenetrating polymer networks from castor oil-based polyurethanes and poly(ethyl actylate) VII. J Appl Polym Sci 34 5 (1987) 2037-2045
86. Xie H.Q., Guo J.S., and Wang G.G. Properties of two kinds of room temperature cured interpenetrating polymer networks based on castor oil polyurethane. Eur Polym J 29 12 (1993) 1547-1551
87. Xie H.Q., and Guo J.S. Room temperature synthesis and mechanical properties of two kinds of elastomeric interpenetrating polymer networks based on castor oil. Eur Polym J 38 11 (2002) 2271-2277
88. Karabanova L.V., Boiteux G., Gain O., Seytre G., Sergeeva L.M., and Lutsyk E.D. Semi-interpenetrating polymer networks based on polyurethane and polyvinylpyrrolidone-II dielectric relaxation and thermal behaviour. J Appl Polym Sci 90 5 (2003) 1191-1201
89. Homas G.J., Yu X.H., Connor T.J., and Cooper S.L. Castor oil based UV-curable polyurethane-acrylate interpenetrating networks. J Appl Polym Sci 43 12 (1991) 2249-2257
90. Athawale V., and Suresh K. Interpenetrating polymer networks based on modified castor oil polyurethane and polymethacrylate. Polym J 30 10 (1998) 813-818
91. Athawale V., and Kolekar S. Interpenetrating polymer networks based on oil modified castor oil urethane and poly(methyl methacrylate). J Macromol Sci-Pure Appl Chem 37 A (2000) 65-79
92. Athawale V., and Suresh K. Comperative studies of castor and hydrogenated castor oil urethane/PMMA semi and full interpenetrating polymer networks. J Macromol Sci-Pure and Appl Chem A35 12 (1998) 1929-1940
93. Athawale V., and Pillay P.S. Interpenetrating polymer networks based on hydrogenated castor oil-isophorone diisocyanate and poly(butyl methacrylate). Bull Chem Soc Jpn 75 2 (2002) 369-373
94. Parthiban S., Rajalingam P., and Radhakrishnan G. Semi-interpenetrating polymer networks from castor oil-based polyurethanes and chlorinated rubber. Polym Int 29 4 (1992) 289-292
95. Sanmathi C.S., Prasannakumar S., and Sherigara B.S. Interpenetrating polymer networks based on polyol modified castor oil polyurethane and poly(2-ethoxyethyl methacrylate)-synthesis, chemical, mechanical, thermal properties, and morphology. J Appl Polym Sci 94 3 (2004) 1029-1034
96. Athawale V., and Kolekar S. Interpenetrating polymer networks based on polyol modified castor oil polyurethane and polymethacrylate. Eur Polym J 34 10 (1998) 1447-1451
97. Sperling L.H., Manson J.A., Yenwo G.M., Devia-Manjarres N., Pulido J., and Conde A. Novel plastics and elastomers from simultaneous interpenetrating networks from castor oil based IPNs-a review of an international programe. Polym Sci Technol 10 (1977) 113-140
98. Sperling L.H., Devia N., Manson J.A., and Conde A. Simultaneous interpenetrating networks based on castor oil elastomers and polystyrene-a review of an international program. ACS Symp Ser 407-421 (1980)
99. Nayak P.L. Natural oil-based polymers: opportunities and challenges. J Macromol Sci Rev Macromol Chem Phys 40 1 (2000) 1-21
100. Athawale V., and Kolekar S. Uralkyd and poly(butyl methacrylate) interpenetrating polymer networks. J Appl Polym Sci 75 (2000) 825-832
101. Raut S., and Athawale V. New interpenetrating elastomeric networks based on uralkyd/poly(butyl metacrylate). Eur Polym J 36 (2000) 1379-1386
102. Athawale V., and Pillay P.S. Interpenetrating polymer networks based on uralkyd-butylmethacrylate. React Funct Polym 50 (2001) 1-8
103. Oldring PKT, Turk N, editors. Polyamides. Resins for Surface Coatings, vol. III. New York: Wiley; 2000. p. 131-197.
104. Barnes H.A. Thixotropy-a review. J Non-Newtonian Fluid Mech 70 (1997) 1-33
105. In: Whelan T. (Ed). Polymer science dictionary (1990), Elsevier Applied Science, London
106. Mewis J., and de Bleyser R. Dynamic behavior of thixotropic systems. J Colloid Interface Sci 40 3 (1972) 360-369
107. Mewis J. Thixotropy-a general review. J Non-Newtonian Fluid Mech 6 (1979) 1-20
108. Koch R. Naylon 11. Polym News 3 6 (1977) 302-307
109. Hewitt D.H., and Armitage F. Styrene copolymers in surface coatings. J Oil Colour Chem Assoc 29 (1946) 109-128
110. Peterson N.R. Styrenated oils. Off Dig 20 (1948) 596-600
111. Hovey A.G. Copolymerization. J Am Oil Chem Soc 27 (1950) 481-491
112. Hoogsteen H.M., Young A.E., and Smith M.K. Styrenation of dehydrated castor oil. Ind Eng Chem 42 (1950) 1587-1591
113. Seymour R.B. Styrene copolymers-their origin and development. J Coat Technol 58 (1986) 71-74
114. Kabasakal O.S. Styrenation of mahaleb and anchovy oils. Prog Org Coat 23 3 (2005) 235-238
115. Saxena R., and Saxena M.S. Copolymerisation of drying and semidrying oils with vinyl monomers for use in surface coatings-Part 1. Paintindia 40 11 (1990) 43-47
116. Saxena R., and Saxena M.S. Copolymerisation of drying and semidrying oils with vinyl monomers for use in surface coatings-Part 2. Paintindia 40 11 (1990) 53-56
117. Li F., Hanson M.V., and Larock R.C. Soybean oil-divinylbenzene thermosetting polymers: synthesis, structure, properties and relationships. Polymer 42 (2001) 1567-1579
118. Kaplan D.L. Biopolymers from renewable resources (1998), Springer, New York
119. Li F., and Larock R.C. Synthesis, structure and properties of new tung oil-styrene-divinylbenzene copolymers prepared by thermal polymerization. Biomacromolecules 4 (2003) 1018-1025
120. Li F., and Larock R.C. Thermosetting polymers from cationic copolymerization of tung oil: synthesis and characterization. J Appl Polym Sci 78 5 (2000) 1044-1056
121. Li F., and Larock R.C. New soybean oil-styrene-divinylbenzene thermosetting copolymers. II. Dynamic mechanical properties. J Polym Sci B: Polym Phys 38 (2000) 2721-2738
122. Li F., and Larock R.C. New soybean oil-styrene-divinylbenzene thermosetting copolymers. III. Tensile stress-strain behavior. J Polym Sci B: Polym Phys 39 (2001) 60-77
123. Li F., Perrenoud A., and Larock R.C. Thermophysical and mechanical properties of novel polymers prepared by the cationic copolymerization of fish oils, styrene and diviylbenzene. Polymer 42 (2001) 10133-10145
124. Erkal F.S., Erciyes A.T., and Yagci Y. A new method for the styrenation of triglyceride oils for surface coatings. J Coat Technol 65 (1993) 37-43
125. Kabasakal O.S., Güner F.S., Erciyes A.T., and Yagci Y. Styrenation of oils based on secondary esters of castor oil. J Coat Technol 67 (1995) 47-51
126. Kabasakal O.S., Güner F.S., Arslan A., Ergan A., Erciyes A.T., and Yagci Y. Use of castor oil in the presence of various oil-based binders. J Coat Technol 68 (1996) 57-62
127. Güner F.S., Usta S., Erciyes A.T., and Yagci Y. Styrenation of triglyceride oils by macromonomer technique. J Coat Technol 72 (2000) 107-110
128. Akbas T., Beker U.G., Güner F.S., Erciyes A.T., and Yagci Y. Drying and semidrying oil macromonomers-III. Styrenation of sunflower and linseed oils. J Coat Technol 88 (2003) 2373-2376
129. Gültekin M., Beker U., Güner F.S., Erciyes A.T., and Yagci Y. Styrenation of castor oil and linseed oil by macromer method. Macromol Mater Eng 283 (2000) 15-20
130. Wool R, Küsefoǧlu S, Palmese G, Khot S, Zhao R. US Patent 6,121,398, 2000.
131. Can E., Küsefoǧlu S., and Wool R.P. Rigid thermosetting liquid molding resins from renewable resources-i synthesis and polymerization of soy oil monoglyceride maleates. J Appl Polym Sci 81 (2001) 69-77
132. Can E., Küsefoǧlu S., and Wool R.P. Rigid thermosetting liquid molding resins from renewable resources-II. Copolymers of soybean oil monoglyceride maleates with neopentyl glycol and bisphenol a maleates. J Appl Polym Sci 83 (2002) 972-980
133. LaScala J., and Wool R.P. Property analysis of triglyceride-based thermosets. Polymer 46 (2005) 61-69
134. Eren T., and Küsefoǧlu S.H. Synthesis and polymerization of the bromacrylated plant oil triglycerides to rigid, flame-retardant polymers. J Appl Polym Sci 91 (2004) 2700-2710
135. Eren T., and Küsefoǧlu S.H. One step hydroxybromination of fatty acid derivatives. Eur J Lipid Sci Technol 106 (2004) 27-34
136. Zhou Z.F., Liu N.C., and Huang H. Reactivity of acrylonitrile-butadiene-styrene terpolymer grafted with long-chain unsaturated carboxylic acids. Polymer 45 (2004) 7109-7116
137. Zhou Z.F., Huang H., and Liu N.C. Kinetics and mechanism of grafting of oleic acid onto acrylonitrile-butadiene-styrene terpolymer. Eur Polym J 37 (2001) 1967-1974
138. Zhou Z.F., Huang H., and Liu N.C. Kinetics and mechanism of grafting of undecylenic acid onto acrylonitrile-butadiene-styrene terpolymer. J Polym Sci A Polym Chem 39 (2001) 486-494
139. Çakmakli{dotless} B., Hazer B., Tekin I.O., and Beǧendik Cömert F. Synthesis and characterization of polymeric soybean oil-g-methyl methacrylate (and n-buthyl methacrylate) graft copolymers: biocompatibility and bacterial adhesion. Biomacromolecules 6 (2005) 1750-1758
140. Çakmakli{dotless} B., Hazer B., Tekin I.O., Kizgut S., Koksal M., and Menceloglu Y. Synthesis and characterization of polymeric linseed oil-g-methyl methacrylate or styrene. Macromol Biosci 4 (2004) 649-665
141. Uyama H., Kuwabara M., Tsujimoto T., and Kobayashi S. Enzymatic synthesis and curing of biodegradable epoxide-containing polyesters from renewable resources. Biomacromolecules 4 2 (2003) 211-215
142. Ahmad S., Ashraf S.M., Sharmin E., Zafar F., and Hasnat A. Studies on ambient cured polyurethane modified epoxy coatings synthesized from a sustainable resource. Prog Crys Growth Charact 45 (2002) 83-88
143. Boquillon N., and Fringant C. Polymer networks derived from curing of epoxidized linseed oil-influence of different catalysts and anhydride hardeners. Polymer 41 (2000) 8603-8613
144. Teng G., and Soucek M.D. Epoxidized soybean oil-based ceramer coatings. J Am Oil Chem Soc 77 (2000) 381-387
145. Samuelsson J., Sundell P., and Johansson M. Synthesis and polymerization of a radiation curable hyperbranched resin based on epoxy functional acids. Prog Org Coat 50 (2004) 193-198
146. Crivello J.V., and Narayan R. Epoxidized triglycerides as renewable monomers in photoinitiated cationic polymerization. Chem Mater 4 (1992) 692-699
147. Chakrapani S., and Crivello J.V. Synthesis and photoinitiated cationic polymerization of epoxidized castor oil and its derivatives. J Macromol Sci-Pure Appl Chem A35 4 (1998) 251-262
148. Crivello J.V., and Carlson K.D. Photoinitiated cationic polymerization of naturally occurring epoxidized triglycerides. J Macromol Sci-Pure Appl Chem A33 5-6 (1996) 691-710
149. Thames S.F., and Yu H. Cationic UV-cured coatings of epoxide-containing vegetable oils. Surf Coat Technol 115 (1999) 208-214
150. Gu H.Y., Ren K., Martin D., Marino T., and Neckers D.C. Cationic UV-cured coatings containing epoxidized soybean oil initiated by new onium salts containing tetrakis(pentafluorophenyl)gallate anion. J Coat Technol 74 (2002) 49
151. Wan Rosli W.D., Kumar R.N., Mek Zah S., and Mohd H.M. UV radiation curing of epoxidized palm oil-cycloaliphatic diepoxide system induced by cationic photoinitiators for surface coatings. Eur Polym J 39 (2003) 593-600
152. Zou K., and Soucek M.D. UV-curable cycloaliphatic epoxide based on modified linseed oil: synthesis, characterization and kinetics. Macromol Chem Phys 206 (2005) 967-975
153. Park S.J., Jin F.L., and Lee J.R. Synthesis and thermal properties of epoxidized vegetable oil. Macromol Rapid Commun 25 (2004) 724-727
154. Park S.J., Jin F.L., Lee J.R., and Shin J.S. Cationic polymerization and physicochemical properties of a biobased epoxy resin initiated by thermally latent catalysts. Eur Polym J 41 (2005) 231-237
155. Chen J., Soucek M.D., Simonsick W.J., and Celikay R.W. Synthesis and photopolymerization of norbornyl epoxidized linseed oil. Polymer 43 (2002) 5379-5389
156. Zoung Z., He J., and Soucek M.D. UV-curable organic-inorganic hybrid films based on epoxynorbornene linseed oils. Prog Org Coat 53 (2005) 83-90
157. Kolot V., and Grinberg S. Vernonia oil-based acrylate and methacrylate polymers and interpenetrating polymer networks with epoxy resins. J Appl Polym Sci 91 (2004) 3835-3843
158. Krishnamurti K. Water-soluble epoxy resins for surface coatings. Prog Org Coat 11 (1983) 167-197
159. Krishnamurti K., Shirsalkar M.M., and Sivasamban M.A. Water-soluble epoxy resins fatty acid esters. Paint Resin (1989) 31-34
160. Guang L., and Gaymans R.J. Polyesteramides with mixtures of poly(tetramethylene oxide) and 1,5-pentandiol. Polymer 38 19 (1997) 4891-4896
161. Ahmad S., Naqvi F., Verma K.L., and Yadav S. Studies on a newly developed linseed oil-based alumina-filled polyesteramide anticorrosive coating. J Appl Polym Sci 72 (1999) 1679-1687
162. Ahmad S., Ashraf S.M., Hasnat A., Yadav S., and Jamal A. Studies on urethane-modified alumina-filled polyesteramide anticorrosive coatings cured at ambient temperature. J Appl Polym Sci 82 (2001) 1855-1865
163. Zafar F., Ashraf S M., and Ahmad S. Air drying polyesteramide from a sustainable resource. Prog Org Coat 51 (2004) 250-256
164. Potter T.A., and Williams J.L. Coatings based on polyurethane chemistry-an overview and recent developments. J Coat Technol 59 749 (1987) 63-72
165. Alam M., Sharmin E., Ashraf S M., and Ahmad S. Newly developed urethane modified polyesteramide-based anticorrosive coatings from a sustainable resource. Prog Org Coat 50 (2004) 224-230
166. Ahmad S., Haque M.M., Ashraf S.M., and Ahmad S. Urethane modified boron filled polyesteramide-a novel anti-microbial polymer from a sustainable resource. Eur Polym J 4 (2004) 2097-2104
167. Mahapatra S.S., and Karak N. Synthesis and characterization of polyesteramide resins from nahar seed oil for surface coating applications. Prog Org Coat 51 (2004) 103-108
168. Ahmad S., Ashraf S.M., Naqvi F., Yadav S., and Hasnat A. A polyesteramide from pangamia glabra oil for biologically safe anticorrosive coating. Prog Org Coat 47 (2003) 95-102
169. Ikeda R., Tsujimoto I.R., Tanaka T., Oyabu H., Uyama H., and Kobayashi S. Man-made urushi-preparation of crosslinked polymeric films from renewable resources via air-oxidation processes. Proc Jpn Acad 76B (2000) 155-160
170. Kobayashi S., Ikeda R., Oyabu H., Tanaka H., and Uyama H. Artificial urushi: design, synthesis, and enzymatic curing of new urushiol analogues. Chem Lett 10 (2000) 1214-1215
171. Ikeda R., Tanaka H., Oyabu H., Uyama H., and Kobayashi S. Preparation of artificial urushi via an environmentally benign process. Bull Chem Soc Jpn 74 6 (2001) 1067-1073
172. Kobayashi S., Uyama H., and Ikeda R. Artificial urushi. Chem Eur J 7 22 (2001) 4754-4760
173. Tsujimoto T., Ikeda R., Uyama H., and Kobayashi S. Synthesis and curing of crosslinkable polyphenols from urushiol analogues. Chem Lett 10 (2000) 1122-1223
174. Tsujimoto T., Ikeda R., Uyama H., and Kobayashi S. Crosslinkable polyphenols from urushiol analogues. Macromol Chem Phys 202 17 (2001) 3420-3425
175. Tsujimoto T., Uyama H., and Kobayashi S. Synthesis and curing behaviors of cross-linkable polynaphthols from renewable resources: preparation of artifical urushi. Macromolecules 37 (2004) 1777-1782
176. Banks R.L., and Bailey G.C. Olefin disproportionation-a new catalytic process. Ind Eng Chem Prod Res Develop 3 (1964) 170-173
177. Van Dam P.B., Mittelmeijer M.C., and Boelhouwer C. Metathesis of unsaturated fatty acid esters by a homogeneous tungsten hexachloride-tetramethyltin catalysts. JCS Chem Commun 78 (1972) 1221-1222
178. Boelhouwer C., and Mol J.C. Metathesis of fatty acid esters. J Am Oil Chem Soc 61 (1984) 425-430
179. Erhan S.Z., Bagby M.O., and Nelsen T.C. Drying properties of metathesized soybean oil. J Am Oil Chem Soc 74 (1997) 703-706
180. Refvik M.D., Larock R.C., and Tian Q. Ruthenium-catalyzed metathesis of vegetable oils. J Am Oil Chem Soc 76 (1999) 93-98
181. Tian Q., and Larock R.C. Model studies and the ADMET polymerization of soybean oil. J Am Oil Chem Soc 79 (2002) 479-488
182. Warwel S., Brüse F., Demes C., Kunz M., and gen Klaas M.R. Polymers and surfactants on the basis of renewable resources. Chemosphere 43 (2001) 39-48
183. Warwel S., Brüse F., Demes C., and Kunz M. Polymers and polymer building blocks from meandowfoam oil. Ind Crops Prod 20 (2004) 301-309
184. Refvik M.D., and Larock R.C. The chemistry of metathesized soybean oil. J Am Oil Chem Soc 76 (1999) 99-102
185. Mendes R.K., Claro-Neto S., and Cavalheiro E.T.G. Evaluation of a new rigid carbon-castor oil polyurethane composite as an electrode material. Talanta 57 (2002) 909-917
186. Khot S.N., Lascala J.J., Can E., Morye S.S., Williams G.I., Palmese G.R., et al. Development and application of triglyceride-based polymers and composites. J Appl Polym Sci 82 (2001) 703-723
187. Xu J., Liu Z., Erhan S.Z., and Carriere C.J. A potential biodegradable rubber-viscoelastic properties of a soybean oil-based composite. J Am Oil Chem Soc 79 (2002) 593-596
188. Dweib M.A., Hu B., O'Donnell A., Shenton H.W., and Wool R.P. All natural composite sandwich beams for structural applications. Compos Struct 63 (2004) 147-157
189. O'Donnell A., Dweib M.A., and Wool R.P. Natural fiber composites with plant oil-based resin. Compos Sci Technol 64 (2004) 1135-1145
190. Husić S., Javni I., and Petrović Z.S. Thermal and mechanical properties of grass reinforced soy-based polyurethane composites. Compos Sci Technol 65 (2005) 19-25
191. Morye S.S., and Woll R.P. Mechanical properties of glass/flax hybrid composites based on a novel modified soybean oil matrix material. Polym Compos 26 4 (2005) 407-416
192. Pandey J.K., Reddy K.R., Kumar A.P., and Singh R.P. An overview on the degradability of polymer nanocomposites. Polym Degrad Stab 88 2 (2005) 234-250
193. Hiroshi U., Mai K., Takashi T., Mitsuru N., Arimitsu U., and Shiro K. Green nanocomposites from renewable resources-plant oil-clay hybrid materials. Chem Mater 15 (2003) 2492-2494
194. Lan T., and Pinnavaia T.J. Clay-reinforced epoxy nanocomposites. Chem Mater 6 12 (1994) 2216-2219
195. Frings S, van Nostrum CF, van der Linde R. The performance of polyester based organic-inorganic hybrid coatings for prefinish construction steel and aluminium. 61 proceedings, fifth Nurnberg congress, 1999.
196. Judeinstein P., and Sanchez C. Hybrid organic-inorganic materials, a land of multidisciplinarity. Mater Chem 6 4 (1996) 511-525
197. Soucek M.D., and Tuman S.J. Novel organic/inorganic coatings based on linseed and sunflower oil with sol-gel precursors. J Coat Technol 68 854 (1996) 73-81
198. Sailer R.A., and Suocek M.D. Oxidizing alkyd ceramers. Prog Org Coat 33 (1998) 36-43
199. Wold C.R., and Soucek M.D. Mechanical properties of mixed metal oxide/linseed oil-based ceramer coatings. J Coat Technol 70 882 (1998) 43
200. Sailer R.A., Wegner J.R., Hurtt G.J., Janson J.E., and Soucek M.D. Linseed and sunflower oil alkyd ceramers. Prog Org Coat 33 (1998) 117-125
201. Ballard R.L., Tuman S.J., Fouquette D.J., Stegmiller W., and Soucek M.D. Effects of an acid catalyst on the inorganic domain of inorganic-organic hybrid materials. Chem Mater 11 (1999) 726-735
202. Sailer R.A., and Soucek M.D. Viscoelastic properties of alkyd ceramers. J AppI Poly Sci 73 (1999) 2017-2028
203. Teng G., and Soucek M.D. Epoxidized soybean oil-based ceramer coatings. J Am Oil Chem Soc 77 4 (2000) 381-387
204. Wold C.R., and Soucek M.D. Viscoelastic and thermal properties of linseed oil-based ceramer coatings. Macromol Chem Phys 201 (2000) 382-392
205. Ballard R.L., Williams J.P., Njus J.M., Kiland B.R., and Soucek M.D. Inorganic-organic hybrid coatings with mixed metal oxides. Eur Polym J 37 (2001) 381-398
206. Deffar D., Teng C., and Soucek M.D. Inorganic-organic hybrid coatings based on bodied soybean oil. Surf Coat Int B 84 B2 (2001) 147-156
207. 2 nanoparticles in drying oil based ceramer coatings. Macromol Mater Eng 286 (2001) 204-215
208. Teng G., Wegner J.R., Hurtt G.J., and Soucek M.D. Novel inorganic/organic hybrid materials based on blown soybean oil with sol-gel precursors. Prog Org Coat 42 (2001) 29-37
209. Deffar D., and Soucek M.D. Synergistic effect of driers on soybean oil-based ceramer coatings. J Coat Technol 73 919 (2001) 95-104
210. Wold C.R., Ni H., and Soucek M.D. Model reaction study on the interaction between the inorganic and organic phases in drying oil based ceramer coatings. Chem Mater 13 9 (2001) 3032-3037
211. Zou K., and Soucek M.D. UV-curable organic-inorganic hybrid film coatings based on epoxidized cyclohexene derivatized linseed oil. Macro Chem Phys 205 15 (2004) 2032-2039
212. Soucek M.D., Johnson A.H., and Wegner J.M. Ternary evaluation of UV-curable seed oil inorganic/organic hybrid coatings using experimental design. Prog Org Coat 52 4 (2004) 300-311
213. Soucek M.D., and Johnson A.J. Preparation of nano-sized UV-absorbing titanium-oxo-clusters via a photo-curing ceramer process. Polym Adv Technol 16 2-3 (2005) 257-261
214. Zong Z., He J., and Soucek M.D. UV-curable organic-inorganic hybrid films based on epoxynorbornene linseed oils. Prog Org Coat 53 2 (2005) 83-90
215. Chen J., Soucek M.D., Simonsick W.J., and Celikay R.W. Synthesis and photopolymerization of norbornyl epoxidized linseed oil. Polymer 43 20 (2002) 5379-5389