Thermal, mechanical and self-destruction properties of aluminum reinforced carbon foam

Journal of Porous Materials

Volumn 22, Issue 4, 2015, Pages 897-906

  Farhan, Shameel ^a   Wang, Ru Min ^a  

^a NORTHWESTERN POLYTECHNICAL UNIVERSITY   (China)

Author keywords

Carbon foam; Compressive strength; Environmental effects; In situ; Self destruction; Thermal conductivity

Indexed keywords

ALUMINUM; ALUMINUM NITRIDE; CARBON; CARBONIZATION; COAL TAR; COMPLEX NETWORKS; COMPRESSIVE STRENGTH; ENVIRONMENTAL IMPACT; FIBER REINFORCED PLASTICS; MECHANICAL PROPERTIES; PORE SIZE; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; SUBSTITUTION REACTIONS; THERMAL CONDUCTIVITY; X RAY DIFFRACTION ANALYSIS;

ATMOSPHERIC MOISTURE; CARBON FIBER REINFORCED COMPOSITE; CARBON FOAM; HOMOGENEOUS DISPERSIONS; POLYURETHANE FOAM; SACRIFICIAL TEMPLATES; SELF-DESTRUCTION; THERMAL AND MECHANICAL PROPERTIES;

FOAMS;

EID: 84933679756     PISSN: 13802224     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10934-015-9963-3     Document Type: Article

References (37)

1. T. Suzuki, H. Umehara, Pitch-based carbon fiber microstructure and texture and compatibility with aluminum coated using chemical vapor deposition. Carbon 37, 47–59 (1999)
2. J.F. Silvain, C. Vincent, J.M. Heintz, N. Chandra, Novel processing and characterization of Cu/CNF nanocomposite for high thermal conductivity applications. Compos. Sci. Technol. 69, 2474–2484 (2009)
3. Y. Chen, B. Chen, X. Shi, H. Xu, Y. Hu, Y. Yuan, Preparation of pitch-based carbon foam using polyurethane foam template. Carbon 45, 2132–2134 (2007)
4. N.C. Gallego, J.W. Klett, Carbon foams for thermal management. Carbon 41, 1461–1466 (2003)
5. R. Mehta, D.P. Anderson, J.W. Hager, Graphitic open-celled carbon foams: processing and characterization. Carbon 41, 2174–2176 (2003)
6. J. Googin, J. Napier, M. Scrivner, Method for manufacturing foam carbon products, US Patent 3,345,440 (1967)
7. F.C. Cowlard, J.C. Lewis, Vitreous carbon: as new form of carbon. J. Mater. Sci. 2, 507–512 (1967)
8. R. D. Klett, High temperature insulating carbonaceous material, US Patent 3,914,392 (1975)
9. R.W. Pekala, R.W. Hopper, Low-density microcellular carbon foams. J. Mater. Sci. 22, 1840–1844 (1987)
10. J. Lee, K. Sohn, T. Hyeon, Fabrication of novel mesocellular carbon foams with uniform ultralarge mesopores. J. Am. Chem. Soc. 123, 5146–5147 (2001)
11. J. Klett, High thermal conductivity mesophase pitched-derived carbon foam, in Proceedings of the 1998 43rd International SAMPE Symposium and Exhibition, Part 1 (of 2) (Anaheim, CA 31 May–4 June, 1998)
12. C. Chen, E.B. Kennel, A.H. Stiller, P.G. Stansberry, J.W. Zondlo, Carbon foam derived from various precursors. Carbon 44, 1535–1543 (2006)
13. X.W. Wu, Y.G. Liu, M.H. Fang, L.F. Mei, B.C. Luo, Preparation and characterization of carbon foams derived from aluminosilicate and phenolic resin. Carbon 49, 1782–1786 (2011)
14. H.F. Xu, H.J. Zhang, Y.D. Huang, Y. Wang, Porous carbon/silica composite monoliths derived from resorcinol–formaldehyde/TEOS. J. Non-Cryst. Solids 356, 971–976 (2010)
15. Y.R. Liu, B.P. Lin, D. Li, X.Q. Zhang, Y. Sun, H. Yang, Magnetically-separable hierarchically porous carbon monoliths with partially graphitized structures as excellent adsorbents for dyes. J. Porous Mat. 21, 933–938 (2014)
16. S.W. Lei, Q.G. Guo, J.L. Shi, L. Liu, Preparation of phenolic-based carbon foam with controllable pore structure and high compressive strength. Carbon 48, 2644–2646 (2010)
17. Y.H. Yan, X.M. Shi, J.G. Liu, T. Zhao, Y.Z. Yu, Thermosetting resin system based on novolak and bismaleimide for resin-transfer molding. J. Appl. Polym. Sci. 83, 1651–1657 (2002)
18. M. Calvo, R. García, A. Arenillas, I. Suárez, S.R. Moinelo, Carbon foams from coals: a preliminary study. Fuel 84, 2184–2189 (2005)
19. S. Farhan, R.M. Wang, H. Jiang, N. Ul-Haq, Preparation and characterization of carbon foam derived from pitch and phenolic resin using a soft templating method. J. Anal. Appl. Pyrolysis 110, 229–234 (2014)
20. A.M. Druma, M.K. Alam, C. Druma, Analysis of thermal conduction in carbon foams. Int. J. Therm. Sci. 43, 689–695 (2004)
21. S.R. White, Y.K. Kim, Process-induced residual stress analysis of AS4/3501-6 composite material. Mech. Compos. Mater. Struct. 5, 153–186 (1998)
22. F.C. Campbell, Manufacturing processes for advanced composites (Elsevier Advanced Technology, Amsterdam, 2004)
23. A.M. Druma, M.K. Alam, M.S. Anghelescu, C. Druma, Three dimensional modeling of carbon foams, in ASME international mechanical engineering congress and exposition 2005 (Orlando, FL, 5–11 November, 2005)
24. A. Gardziella, L.A. Pilato, A. Knop, Phenolic resins: chemistry, application, standardization, safety and ecology, 2nd edn. (Springer, Berlin, 2000)
25. P. Byung-Dae, R. Bernard, Y.S. Kim, W.T. So, Effect of synthesis parameters on thermal behavior of phenol-formaldehyde resol resin. J. Appl. Polym. Sci. 83, 1415–1424 (2002)
26. J. Wang, H. Jiang, N. Jiang, Study on the pyrolysis of phenol-formaldehyde (PF) resin and modified PF resin. Thermochim. Acta 496, 136–142 (2009)
27. L.B. Manfredi, O. De La Osa, N. Galego Fernández, A. Vázquez, Structure-properties relationship for resols with different formaldehyde/phenol molar ratio. Polymer 40, 3867–3875 (1999)
28. J.T. Blucher, J. Dobranszky, U. Narusawa, Aluminium double composite structures reinforced with composite wires. Mater. Sci. Eng., A 387–389, 867–872 (2004)
29. E. Pippel, J. Woltersdorf, M. Doktor, J. Blucher, H.P. Degischer, Interlayer structure of carbon fibre reinforced aluminium wires. J. Mater. Sci. 35, 2279–2289 (2000)
30. R.Y. Lin, Interface evolution in aluminum matrix composites during fabrication. Key Eng. Mater. 104–107, 507–522 (1995)
31. M.H. Vidal-Sétif, M. Lancin, C. Marhic, R. Valle, J.L. Raviart, J.C. Daux, M. Rabinovitch, On the role of brittle interfacial phases on the mechanical properties of carbon fibre reinforced Al-based matrix composites. Mater. Sci. Eng., A 272, 321–333 (1999)
32. C. Qiu, R. Metselaar, Solubility of carbon in liquid Al and stability of Al4C3. J. Alloys Compd. 216, 55–60 (1994)
33. S.H. Li, C.G. Chao, Effects of carbon fiber/Al interface on mechanical properties of carbon-fiber-reinforced aluminum-matrix composites. Metall. Mater. Trans. A 35, 2153–2160 (2004)
34. H. Kwon, H. Kurita, M. Leparoux, A. Kawasaki, Carbon nanofiber reinforced aluminum matrix composite fabricated by combined process of spark plasma sintering and hot extrusion. J. Nanosci. Nanotechnol. 11, 4119–4126 (2011)
35. T.Y. Kosolapova, Carbides properties production and applications, 1st edn. (Plenum Press, New York, 1971)
36. J.K. Park, J.P. Lucas, Moisture effect on SiCP/6061 Al MMC: dissolution of interfacial Al4C3. Scr. Mater. 37, 511–516 (1997)
37. S. Meille, M. Lombardi, J. Chevalier, L. Montanaro, Mechanical properties of porous ceramics in compression: on the transition between elastic, brittle, and cellular behavior. J. Europ. Ceram. Soc. 32, 3959–3967 (2012)