Approach for the rationalisation of product lines variety

IFAC Proceedings Volumes (IFAC-PapersOnline)

Volumn 19, Issue , 2014, Pages 3280-3291

  Giovannini, A ^a,b,c   Aubry, A ^a,b   Panetto, H ^a,b   El Haouzi, H ^a,b   Pierrel, L ^c   Dassisti, M ^d  

^a CENTRE DE RECHERCHE EN AUTOMATIQUE DE NANCY   (France)

^b UNIVERSITÉ DE LORRAINE   (France)

^c TRANE SAS   (France)

^d POLITECNICO DI BARI   (Italy)

Author keywords

Knowledge representation; Knowledge based system; Mass customization; Product variety

Indexed keywords

AUTOMATION; KNOWLEDGE BASED SYSTEMS; KNOWLEDGE REPRESENTATION; SALES;

CLASSIC PRODUCTS; CUSTOMER PROFILES; CUSTOMER SEGMENTS; INNOVATIVE APPROACHES; MASS CUSTOMISATION; MASS CUSTOMIZATION; PRODUCT VARIETY; SYSTEM THINKINGS;

PRODUCT DESIGN;

EID: 84929058003     PISSN: 14746670     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.3182/20140824-6-za-1003.02226     Document Type: Conference Paper

References (52)

1. Akao, Yoji (2004), Quality Function Deployment: Integrating Customer Requirements Into Product Design. Productivity Press.
2. Aldanondo, M. and Vareilles, E. (2008), Configuration for Mass Customization: How to Extend Product Configuration Towards Requirements and Process Configuration. Journal of Intelligent Manufacturing, 19(5): 521-535.
3. American Society of Heating, Refrigerating and AirConditioning Engineers, Inc (2012), 2012 ASHRAE Handbook: Heating, Ventilating, and Air-conditioning Systems and Equipment. Atlanta, Ga.: ASHRAE.
4. Atkinson, Colin and Kiko, Kilian (2008), A Detailed Comparison of UML and OWL.
5. Baader, Franz (2003), The Description Logic Handbook: Theory, Implementation, and Applications. Cambridge university press.
6. Balakrishnan, PV Sundar and Jacob, Varghese S. (1996), Genetic Algorithms for Product Design. Management Science, 42(8): 1105-1117.
7. Von Bertalanffy, Ludwig (1956), General Systems Theory.
8. Blecker, T., Abdelkafi, N., Kaluza, B. and Kreutler, G. (2004), Mass Customization Vs. Complexity: A Gordian Knot?, 890-903.
9. Blockley, David I. and Godfrey, Patrick (2000), Doing It Differently: Systems for Rethinking Construction. Thomas Telford.
10. Bouffaron, F., Gouyon, D., Dobre, D. and Morel, G. (2012), Revisiting the Interoperation Relationships Between Systems Engineering Collaborative Processes, in: 14th IFAC Symposium on Information Control Problems in Manufacturing, INCOM 2012. Elsevier, IFAC Papersonline.
11. Dassisti, Michele and Nicolò, Michele De (2012), Enterprise Integration and Economical Crisis for Mass Craftsmanship: A Case Study of an Italian Furniture Company, 113-123, in: Herrero, P., Panetto, H., Meersman, R., and Dillon, T. (Eds.), On the Move to Meaningful Internet Systems: OTM 2012 Workshops. Lecture Notes in Computer Science. Springer.
12. Davis, Stanley M. (1987), Future Perfect. Addison-Wesley.
13. Du, X., Jiao, J. and Tseng, M. M. (2001), Product Platform Representation: a Graph Grammar Approach. Manufacturing Systems, 31(2): 1-7.
14. Faisandier, Alain (2013), Systems Architecture and Design. Belberaud: Sinergy'Com.
15. Ferryanto, Liem (2007), DESIGN FOR SIX SIGMA. Jurnal Teknik Industri, 9(1): 1-14.
16. Gao, P., and Lin., L. F., Cai, M. and Dong, J. X. (2003), Automatic Acquisition of Product Configuration Model Based on Ontology Mapping. Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing System(China), 9(9): 810-816.
17. Giovannini, A., Aubry, A., Panetto, H., Dassisti, M. and El Haouzi, H. (2012), Ontology-Based System for Supporting Manufacturing Sustainability. Annual Reviews in Control, 36(2): 309-317.
18. Giovannini, A., Aubry, A., Panetto, H. and El Haouzi, H. (2013), Mass Customisation in Sustainable Networked Enterprises, 657-666, in: Proceedings of the 14th IFIP Working Conference on VIRTUAL ENTERPRISE, Sept. 30th-Oct. 2nd, Dresden, Germany, Collaborative Systems for Reindustrialization. Springer.
19. Green, Paul E. and Srinivasan, Venkatachary (1978), Conjoint Analysis in Consumer Research: Issues and Outlook. Journal of consumer research: 103-123.
20. Hazelrigg, G. A. (1998), A Framework for Decision-Based Engineering Design. Journal of Mechanical Design, 120(4): 653-658.
21. Helo, P. T., and Xu., Q. L., Kyllönen, S. J. and Jiao, R. J. (2010), Integrated Vehicle Configuration System-Connecting the Domains of Mass Customization. Computers in Industry, 61(1): 44-52.
22. Hong, G., Hu, L., Xue, D., Tu, Y. L. and Xiong, Y. L. (2008), Identification of the Optimal Product Configuration and Parameters Based on Individual Customer Requirements on Performance and Costs in One-of-a-kind Production. International Journal of Production Research, 46(12): 3297-3326.
23. Huffman, Cynthia and Kahn, Barbara E. (1998), Variety for Sale: Mass Customization or Mass Confusion? Journal of retailing, 74(4): 491-513.
24. IEEE (2002), IEEE Guide for CASE Tool Interconnections-Classification and Description, 1175.1-2002.
25. Inakoshi, H., Okamoto, S., Ohta, Y. and Yugami, N. (2001), Effective Decision Support for Product Configuration by Using Cbr, in: Proceedings of the Fourth International Conference on Case-Based Reasoning (ICCBR), Workshop Casebased Reasoning in Electronic Commerce, Vancouver, Canada.
26. ISO/IEC (2007), Systems and Software Engineering-Recommended Practice for Architectural Description of Software-Intensive Systems. ISO/IEC 42010:2007. Geneva, Switzerland: International Organization for Standards (ISO)/International Electrotechnical Commission (IEC).
27. ISO/IEC (2008), Systems and Software Engineering - System Life Cycle Processes. ISO/IEC 15288:2008 (E). Geneva, Switzerland: International Organization for Standardization (ISO)/International Electrotechnical Commission (IEC).
28. ISO/IEC/IEEE (2007), Systems and Software Engineering-Measurement Process. ISO/IEC/IEEE 15939:2007. Geneva, Switzerland: International Organization for Standardization (ISO)/International Electrotechnical Commission (IEC).
29. ISO/IEC/IEEE (2011), Systems and Software Engineering-Requirements Engineering. ISO/IEC/IEEE 29148. Geneva, Switzerland: International Organization for Standardization (ISO)/International Electrotechnical Commission/Institute of Electrical and Electronics Engineers (IEEE), (IEC).
30. Jackson, Michael and Zave, Pamela (1995), Deriving Specifications from Requirements: An Example, 15-24, in: Proceedings of the 17th international conference on Software engineering.
31. Janitza, Dennis, Lacher, Martin, Maurer, Maik, Pulm, Udo and Rudolf, Henning (2003), A Product Model for Mass - Customisation Products, 1023-1029, in: Palade, V., Howlett, R., and Jain, L. (Eds.), Knowledge-Based Intelligent Information and Engineering Systems. Lecture Notes in Computer Science. Springer Berlin / Heidelberg.
32. Jiao, Jianxin (Roger), Simpson, Timothy W. and Siddique, Zahed (2007), Product Family Design and Platform-based Product Development: a State-of-the-art Review. Journal of Intelligent Manufacturing, 18(1): 5-29.
33. Krishnan, V. and Gupta, Saurabh (2001), Appropriateness and Impact of Platform-Based Product Development. Management Science, 47(1): 52.
34. Li, Bin, Chen, Liping, Huang, Zhengdong and Zhong, Yifang (2006), Product Configuration Optimization Using a Multiobjective Genetic Algorithm. The International Journal of Advanced Manufacturing Technology, 30(1): 20-29.
35. Liker, Jeffrey K. and Morgan, James (2011), Lean Product Development as a System: A Case Study of Body and Stamping Development at Ford. Engineering Management Journal, 23(1): 16-28.
36. Liu, X. B., and Yuan., C. F., Gao, T. Y., Sun, W. and Wang, W. L. (2003), Layered Product Configuration Model Based on Feature and Faced to Customer. Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing System(China), 9(7): 527-531.
37. Mazo, R., Salinesi, C., Diaz, D., Djebbi, O. and Lora-Michiels, A. (2012), Constraints: The Heart of Domain and Application Engineering in the Product Lines Engineering Strategy. International Journal of Information System Modeling and Design (IJISMD), 3(2): 33-68.
38. Morgan, James M. and Liker, Jeffrey K. (2006), The Toyota Product Development System. Productivity press New York.
39. Pohl, K., Bockle, G. and Van Der Linden, F. (2005), Software Product Line Engineering. Springer.
40. Protégé available at http://protege.stanford.edu/
41. Pyster, A., Olwell, D., Squires, A., Hutchison, N., Enck, S. and Anthony, J. (2012), A Guide to the Systems Engineering Body of Knowledge (SEBoK). Version 1.0. Stevens Institute of Technology.
42. Qin, Y. H. and Wei, G. X. (2010), Product Configuration Based on Modular Product Family Modelling. Journal of Computational Information Systems, 6(7): 2321-2331.
43. Shah, Rachna and Ward, Peter T. (2007), Defining and Developing Measures of Lean Production. Journal of operations management, 25(4): 785-805.
44. Sommerville, Ian and Sawyer, Pete (1997), Requirements Engineering: A Good Practice Guide. New York, NY, USA: John Wiley & Sons, Inc.
45. Spear, Steven and Bowen, H. Kent (1999), Decoding the DNA of the Toyota Production System. Harvard Business Review, 77: 96-108.
46. Tseng, Mitchell M. and Du, Xuehong (1998), Design by Customers for Mass Customization Products. CIRP Annals - Manufacturing Technology, 47(1): 103-106.
47. Wang, YAPING, Han, GUIHUA, Ge, JIANGHUA, Qi, JINGRUI and Xu, JIANYUAN (2011), Research on Design Method of Demand-driven Product Configuration for Mass Customization. Journal of Advanced Manufacturing Systems, 10(1): 117-125.
48. Wassenaar, Henk Jan and Chen, Wei (2001), An Approach to Decision-based Design, in: Proceedings ASME 2001 Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Pittsburgh, Pennsylvania, DETC2001/DTM-21683.
49. Xie, H., Henderson, P. and Kernahan, M. (2005), Modelling and Solving Engineering Product Configuration Problems by Constraint Satisfaction. International Journal of Production Research, 43(20): 4455-4469.
50. Yang, Dong and Dong, Ming (2012), A Constraint Satisfaction Approach to Resolving Product Configuration Conflicts. Advanced Engineering Informatics, 26(3): 592-602.
51. Zhou, Chunjing, Lin, Zhihang and Liu, Chuntao (2008), Customer-driven Product Configuration Optimization for Assemble-to-order Manufacturing Enterprises. The International Journal of Advanced Manufacturing Technology, 38(1): 185-194.
52. Zhu, Bin, Wang, Zhan, Yang, Haicheng, Mo, Rong and Zhao, Yanwei (2008), Applying Fuzzy Multiple Attributes Decision Making for Product Configuration. Journal of Intelligent Manufacturing, 19(5): 591-598.