Optofluidic fabrication for 3D-shaped particles

Nature Communications

Volumn 6, Issue , 2015, Pages

  Paulsen, Kevin S ^a   Di Carlo, Dino ^b   Chung, Aram J ^a  

^a RENSSELAER POLYTECHNIC INSTITUTE   (United States)

^b Engineering IV   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

POLYMER; THREE DIMENSIONAL SHAPED POLYMER; UNCLASSIFIED DRUG;

AUTOMATION; BIOTECHNOLOGY; POLYMERIZATION; RESOLUTION; ULTRAVIOLET RADIATION;

ANALYSIS; ARTICLE; BIOTECHNOLOGY; FLOW KINETICS; INERTIAL FLOW SHAPING; NANOFABRICATION; OPTOFLUIDIC FABRICATION; THREE DIMENSIONAL PRINTING; ULTRAVIOLET LIGHT POLYMERIZATION;

EID: 84928541748     PISSN: None     EISSN: 20411723     Source Type: Journal    
DOI: 10.1038/ncomms7976     Document Type: Article

References (50)

1. Gupta, S., Zhang, Q. L., Emrick, T. & Russell, T. P. 'Self-corralling' nanorods under an applied electric field. Nano Lett. 6, 2066-2069 (2006).
2. Donev, A. et al. Improving the density of jammed disordered packings using ellipsoids. Science 303, 990-993 (2004).
3. Vukusic, P. & Sambles, J. R. Photonic structures in biology. Nature 424, 852-855 (2003).
4. Shum, H. C. et al. Droplet microfluidics for fabrication of non-spherical particles. Macromol. Rapid. Commun. 31, 108-118 (2010).
5. Bonderer, L. J., Studart, A. R. & Gauckler, L. J. Bioinspired design and assembly of platelet reinforced polymer films. Science 319, 1069-1073 (2008).
6. Monat, C., Domachuk, P. & Eggleton, B. Integrated optofluidics: a new river of light. Nat. Photon. 1, 106-114 (2007).
7. Shekunov, B. Y., Chattopadhyay, P., Tong, H. H. & Chow, A. H. Particle size analysis in pharmaceutics: principles, methods and applications. Pharm. Res. 24, 203-227 (2007).
8. Lavan, D. A., McGuire, T. & Langer, R. Small-scale systems for in vivo drug delivery. Nature Biotechnol. 21, 1184-1191 (2003).
9. Peppas, N. A., Hilt, J. Z., Khademhosseini, A. & Langer, R. Hydrogels in biology and medicine: from molecular principles to bionanotechnology. Adv. Mater. 18, 1345-1360 (2006).
10. Glotzer, S. C. & Solomon, M. J. Anisotropy of building blocks and their assembly into complex structures. Nat. Mater 6, 557-562 (2007).
11. Pham, D. T. & Gault, R. S. A comparison of rapid prototyping technologies. Int. J. Mach. Tool. Manu. 38, 1257-1287 (1998).
12. Williams, J. M. et al. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. Biomaterials 26, 4817-4827 (2005).
13. Croccolo, D., De Agostinis, M. & Olmi, G. Experimental characterization and analytical modelling of the mechanical behaviour of fused deposition processed parts made of ABS-M30. Comput. Mater. Sci. 79, 506-518 (2013).
14. Sachs, E. et al. Three-dimensional printing: the physics and implications of additive manufacturing. CIRP Ann. Manuf. Techn. 42, 257-260 (1993).
15. Seitz, H., Rieder, W., Irsen, S., Leukers, B. & Tille, C. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. J. Biomed. Mater. Res. B 74B, 782-788 (2005).
16. Santos, E. C., Shiomi, M., Osakada, K. & Laoui, T. Rapid manufacturing of metal components by laser forming. Int. J. Mach. Tool. Manu. 46, 1459-1468 (2006).
17. Ryan, G. E., Pandit, A. S. & Apatsidis, D. P. Porous titanium scaffolds fabricated using a rapid prototyping and powder metallurgy technique. Biomaterials 29, 3625-3635 (2008).
18. Mironov, V., Boland, T., Trusk, T., Forgacs, G. & Markwald, R. R. Organ printing: computer-aided jet-based 3D tissue engineering. Trends. Biotechnol. 21, 157-161 (2003).
19. Mironov, V., Kasyanov, V., Drake, C. & Markwald, R. R. Organ printing: promises and challenges. Regen. Med. 3, 93-103 (2008).
20. Farahani, R. D., Chizari, K. & Therriault, D. Three-dimensional printing of freeform helical microstructures: a review. Nanoscale 6, 10470-10485 (2014).
21. Lee, S. et al. Effects of process parameters in plastic, metal, and ceramic injection molding processes. Korea-Aust. Rheol. J. 23, 127-138 (2011).
22. Rolland, J. P. et al. Direct fabrication and harvesting of monodisperse, shape-specific nanobiomaterials. J. Am. Chem. Soc. 127, 10096-10100 (2005).
23. Gratton, S. E. A. et al. The effect of particle design on cellular internalization pathways. Proc. Natl Acad. Sci. USA 105, 11613-11618 (2008).
24. Seo, M. et al. Continuous microfluidic reactors for polymer particles. Langmuir 21, 11614-11622 (2005).
25. Dendukuri, D., Tsoi, K., Hatton, T. A. & Doyle, P. S. Controlled synthesis of nonspherical microparticles using microfluidics. Langmuir 21, 2113-2116 (2005).
26. Jeong, W. J. et al. Continuous fabrication of biocatalyst immobilized microparticles using photopolymerization and immiscible liquids in microfluidic systems. Langmuir 21, 3738-3741 (2005).
27. Nie, Z., Li, W., Seo, M., Xu, S. & Kumacheva, E. Janus and ternary particles generated by microfluidic synthesis: design, synthesis, and self-assembly. J. Am. Chem. Soc. 128, 9408-9412 (2006).
28. Dendukuri, D., Pregibon, D. C., Collins, J., Hatton, T. A. & Doyle, P. S. Continuous-flow lithography for high-throughput microparticle synthesis. Nat. Mater. 5, 365-369 (2006).
29. Dendukuri, D., Gu, S. S., Pregibon, D. C., Hatton, T. A. & Doyle, P. S. Stop-flow lithography in a microfluidic device. Lab. Chip 7, 818-828 (2007).
30. Chung, S. E. et al. Optofluidic maskless lithography system for real-time synthesis of photopolymerized microstructures in microfluidic channels. Appl. Phys. Lett. 91, 3 (2007).
31. Chung, S. E., Park, W., Shin, S., Lee, S. A. & Kwon, S. Guided and fluidic self-assembly of microstructures using railed microfluidic channels. Nat. Mater. 7, 581-587 (2008).
32. Lee, H., Kim, J., Kim, H., Kim, J. & Kwon, S. Colour-barcoded magnetic microparticles for multiplexed bioassays. Nat. Mater. 9, 745-749 (2010).
33. Kim, H. et al. Structural colour printing using a magnetically tunable and lithographically fixable photonic crystal. Nat. Photon. 3, 534-540 (2009).
34. Appleyard, D. C., Chapin, S. C., Srinivas, R. L. & Doyle, P. S. Bar-coded hydrogel microparticles for protein detection: synthesis, assay and scanning. Nat. Protoc. 6, 1761-1774 (2011).
35. Jang, J. H., Dendukuri, D., Hatton, T. A., Thomas, E. L. & Doyle, P. S. Innentitelbild: a route to three -dimensional structures in a microfluidic device: stop-flow interference lithography. Angew. Chem. Int. Ed. 119, 9076-9076 (2007).
36. Song, S.-H. et al. Fine-tuned grayscale optofluidic maskless lithography for three-dimensional freeform shape microstructure fabrication. Opt. Lett. 39, 5162-5165 (2014).
37. Lee, S. A., Chung, S. E., Park, W., Lee, S. H. & Kwon, S. Three-dimensional fabrication of heterogeneous microstructures using soft membrane deformation and optofluidic maskless lithography. Lab. Chip 9, 1670-1675 (2009).
38. Di Carlo, D. Inertial microfluidics. Lab. Chip 9, 3038-3046 (2009).
39. Martel, J. M. & Toner, M. Inertial focusing in microfluidics. Annu. Rev. Biomed. Eng. 16, 371-396 (2014).
40. Amini, H., Lee, W. & Di Carlo, D. Inertial microfluidic physics. Lab. Chip 14, 2739-2761 (2014).
41. Chung, A. J., Gossett, D. R. & Di Carlo, D. Three dimensional, sheathless, and high-throughput microparticle inertial focusing through geometry-induced secondary flows. Small 9, 685-690 (2013).
42. Chung, A. J. et al. Microstructure-induced helical vortices allow single-stream and long-term inertial focusing. Lab. Chip 13, 2942-2949 (2013).
43. Amini, H. et al. Engineering fluid flow using sequenced microstructures. Nat. Commun. 4, 1-8 (2013).
44. Stoecklein, D. et al. Micropillar sequence designs for fundamental inertial flow transformations. Lab. Chip 14, 4197-4204 (2014).
45. Bretherton, F. P. The motion of rigid particles in a shear flow at low Reynolds number. J. Fluid Mech. 14, 284-304 (1962).
46. Amini, H., Sollier, E., Weaver, W. M. & Di Carlo, D. Intrinsic particle-induced lateral transport in microchannels. Proc. Natl Acad. Sci. USA 109, 11593-11598 (2012).
47. Baah, D. et al. Preparation of planar graded refractive index nanocomposites using microfluidics. Mater. Sci. Eng. B 176, 883-888 (2011).
48. Murphy, S. V. & Atala, A. 3D bioprinting of tissues and organs. Nature Biotechnol. 32, 773-785 (2014).
49. Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S. & Dubruel, P. A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering. Biomaterials 33, 6020-6041 (2012).
50. McDonald, J. C. & Whitesides, G. M. Poly(dimethylsiloxane) as a material for fabricating microfluidic devices. Acc. Chem. Res. 35, 491-499 (2002).