Analysis of the mechanical response of biomimetic materials with highly oriented microstructures through 3D printing, mechanical testing and modeling

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 48, Issue , 2015, Pages 70-85

  de Obaldia, Enrique Escobar ^a   Jeong, Chanhue ^a   Grunenfelder, Lessa Kay ^b   Kisailus, David ^b   Zavattieri, Pablo ^a  

^a PURDUE UNIVERSITY   (United States)

^b University of California Riverside   (United States)

Author keywords

3D printing; Biomimetic; Composites; Indentation; Modeling

Indexed keywords

ABRASION; ASPECT RATIO; BIOMIMETIC MATERIALS; BIOMIMETICS; COMPOSITE MATERIALS; COMPUTATION THEORY; COMPUTATIONAL METHODS; CRACKS; ELASTIC MODULI; EROSION; FRACTURE TOUGHNESS; INDENTATION; MAGNETITE; MAGNETITE NANOPARTICLES; MECHANICAL TESTING; MICROSTRUCTURE; MODELS; SHEAR STRAIN; WEAR RESISTANCE;

3-D PRINTING; BIOMIMETIC APPROACHES; INELASTIC DEFORMATION; LATERAL LOAD TRANSFER; ORIENTED MICROSTRUCTURE; ORIENTED NANOSTRUCTURES; STAGGERED CONFIGURATION; TESTING AND MODELING;

3D PRINTERS;

BIOMIMETIC MATERIAL; CALCIUM CARBONATE; HYDROXYAPATITE; MAGNETITE; NANOMATERIAL;

ABRASION; ANIMAL SHELL; ANISOTROPY; ARTICLE; CHITON; ENERGY; HARDNESS; MECHANICAL STIMULUS TEST; NONHUMAN; PRIORITY JOURNAL; RIGIDITY; SCANNING ELECTRON MICROSCOPY; SHEAR STRENGTH; THREE DIMENSIONAL PRINTING; TOOTH; YOUNG MODULUS; CHEMISTRY; MATERIALS TESTING; MECHANICAL STRESS; THEORETICAL MODEL;

BIOMIMETIC MATERIALS; ELASTIC MODULUS; MATERIALS TESTING; MODELS, THEORETICAL; PRINTING, THREE-DIMENSIONAL; STRESS, MECHANICAL;

EID: 84928309831     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2015.03.026     Document Type: Article

References (90)

1. Amini S., Miserez A. Acta biomaterialia wear and abrasion resistance selection maps of biological materials. Acta Biomater. 2013, 9(8):7895-7907.
2. Ashby M., Gibson L. The mechanical properties of natural materials. I. Material property charts. Proc. Math. Phys. Sci. 1995, 450(1938):123-140.
3. Baiant, Z., Cedolin, L. Stability of Structures, 1991.
4. Barani A., Keown A.J., Bush M.B., Lee J.J.-W., Chai H., Lawn B.R. Mechanics of longitudinal cracks in tooth enamel. Acta Biomater. 2011, 7(5):2285-2292. May.
5. Barthelat F., Espinosa H.D. An experimental investigation of deformation and fracture of Nacre-Mother of Pearl. Exp. Mech. 2007, 47(3):311-324. Mar.
6. Barthelat F., Li C. Mechanical properties of nacre constituents and their impact on mechanical performance. J. Mater. Res. 2006, 3111(July 2005):1977-1986.
7. Barthelat F., Tang H., Zavattieri P., Li C., Espinosa H. On the mechanics of mother-of-pearl: a key feature in the material hierarchical structure. J. Mech. Phys. Solids 2007, 55(2):306-337. Feb.
8. Bazhenov S.L., Kuperman a.M., Zelenskii E.S., Berlin a.a. Compression failure of unidirectional glass-fibre-reinforced plastics. Compos. Sci. Technol. 1992, 45(3):201-208. Jan.
9. Bechtle S., Ang S.F., Schneider G.a. On the mechanical properties of hierarchically structured biological materials. Biomaterials 2010, 31(25):6378-6385. Sep.
10. Bergmann C., Lindner M., Zhang W., Koczur K., Kirsten A., Telle R., Fischer H. 3D printing of bone substitute implants using calcium phosphate and bioactive glasses. J. Eur. Ceram. Soc. 2010, 30(12):2563-2567. Sep.
11. Brooker L., Shaw J. The Chiton Radula: a unique model for biomineralization studies. Adv. Top. Biominer. 2012.
12. Bruet B., Song J., Boyce M., Ortiz C. Materials design principles of ancient fish armour. Nat. Mater. 2008, 7(9):748-756. Sep.
13. Chantikul P., Anstis G. A critical evaluation of indentation techniques for measuring fracture toughness: II, Strength method. J. Am. Ceram. Soc. 1981, 64(9):539-543.
14. Chen J., Bull S.J. Multi-cycling nanoindentation study on thin optical coatings on glass. J. Phys. D: Appl. Phys. 2008, 41(7):074009. Apr.
15. Chen P., McKittrick J., Meyers M. Biological materials: functional adaptations and bioinspired designs. Prog. Mater. Sci. 2012, 57(8):1492-1704. Nov.
16. Cima M., Sachs E., Cima L. Computer-derived microstructures by 3D printing: bio-and structural materials. Solid Free 1994, 181-190. Fabr.
17. Connors M.J., Ehrlich H., Hog M., Godeffroy C., Araya S., Kallai I., Gazit D., Boyce M., Ortiz C. Three-dimensional structure of the shell plate assembly of the chiton Tonicella marmorea and its biomechanical consequences. J. Struct. Biol. 2012, 177(2):314-328. Feb.
18. Dimas L.S., Bratzel G.H., Eylon I., Buehler M.J. Tough composites inspired by mineralized natural materials: computation, 3d printing, and testing. Adv. Funct. Mater. 2013, 23(36):4629-4638. Jun.
19. Doyle C.-T., Sun J.F. Theory of Elasticity 1999, A&AE 553 Cl. Notes, Purdue Univ.
20. Enax J., Janus A.M., Raabe D., Epple M., Fabritius H.-O. Ultrastructural organization and micromechanical properties of shark tooth enameloid. Acta Biomater. 2014, May.
21. Espinosa H.D., Juster A.L., Latourte F.J., Loh O.Y., Gregoire D., Zavattieri P.D. Tablet-level origin of toughening in abalone shells and translation to synthetic composite materials. Nat. Commun. 2011, 2(2):173. Jan.
22. Fabritius H.O., Sachs C., Triguero P.R., Raabe D. Influence of structural principles on the mechanics of a biological fiber-based composite material with hierarchical organization: the exoskeleton of the lobster homarus americanus. Adv. Mater. 2009, 21:391-400.
23. Fan S., Yilong B. Mineral bridges of nacre and its effects. Acta Mech. Sin. 2001, 17(3):251-257. Aug.
24. Fratzl P., Gupta H.S., Paschalis E.P., Roschger P. Structure and mechanical quality of the collagen? mineral nano-composite in bone. J. Mater. Chem. 2004, 14(14):2115.
25. Gao H., Ji B., Jäger I.L., Arzt E., Fratzl P. Materials become insensitive to flaws at nanoscale. PNAS 2003, 100(10):5597-5600.
26. Gordon L.M., Joester D. Nanoscale chemical tomography of buried organic-inorganic interfaces in the chiton tooth. Nature 2011, 469(7329):194-197. Jan.
27. Gordon L.M., Joester D. Nanoscale chemical tomography of buried organic-inorganic interfaces in the chiton tooth. Nature 2011, 469(7329):194-197. Jan.
28. Grunenfelder L.K., Suksangpanya N., Salinas C., Milliron G., Yaraghi N., Herrera S., Evans-Lutterodt K., Nutt S.R., Zavattieri P., Kisailus D. Bio-inspired impact-resistant composites. Acta Biomater. 2014, Mar.
29. Grunenfelder L.K., de Obaldia E.Escobar, Wang Q., Li D., Weden B., Salinas C., Wuhrer R., Zavattieri P., Kisailus D. Stress and damage mitigation from oriented nanostructures within the radular teeth of Cryptochiton stelleri. Adv. Funct. Mater. 2014, 24(39):6093-6104. Oct.
30. Lowenstam H.A., Weiner S. On Biomineralization 1989, Oxford Oxford Univ.
31. Lichtenegger, H.C., Birkedal, H., Waite, J.H., 2008. Heavy Metals in the Jaws of Invertebrates, Biomineralization: From Nature to Application, Vol. 4 In: Sigel, A., Sigel, H. Sigel, R.K.O., (Eds.), John Wiley & Sons, Ltd, Chichester, UK.
32. Han L., Wang L., Song J., Boyce M.C., Ortiz C. Direct quantification of the mechanical anisotropy and fracture of an individual exoskeleton layer via uniaxial compression of micropillars. Nano Lett. 2011, 11(9):3868-3874. Sep.
33. He L.H., Swain M.V. Contact induced deformation of enamel. Appl. Phys. Lett. 2007, 90(17):171916.
34. He L.H., Swain M.V. Understanding the mechanical behaviour of human enamel from its structural and compositional characteristics. J. Mech. Behav. Biomed. Mater. 2008, 1(1):18-29. Jan.
35. Hjelmstad, K., Fundamentals of Structural Mechanics. 2005, 480.
36. Jang J., Pharr G.M. Influence of indenter angle on cracking in Si and Ge during nanoindentation. Acta Mater. 2008, 56(16):4458-4469. Sep.
37. Ji B., Gao H. Mechanical properties of nanostructure of biological materials. J. Mech. Phys. Solids 2004, 52(9):1963-1990. Sep.
38. Johnson K.L. Contact Mechanics 1987, 468. Cambridge University Press.
39. Kamat S., Su X., Ballarini R., Heuer A.H. Structural basis for the fracture toughness of the shell of the conch Strombus gigas. Nature 2000, 405(6790):1036-1040. Jun.
40. Kamat S., Kessler H., Ballarini R., Nassirou M., Heuer A.H. Fracture mechanisms of the Strombus gigas conch shell: II-Micromechanics analyses of multiple cracking and large-scale crack bridging. Acta Mater. 2004, 52(8):2395-2406. May.
41. Kruzic J.J., Kim D.K., Koester K.J., Ritchie R.O. Indentation techniques for evaluating the fracture toughness of biomaterials and hard tissues. J. Mech. Behav. Biomed. Mater. 2009, 2(4):384-395. Aug.
42. Lankford J., Davidson D. The crack-initiation threshold in ceramic materials subject to elastic/plastic indentation. J. Mater. Sci. 1979, 14.
43. Lawn B.R., Evans A., Marshall D.B. Elastic/plastic indentation damage in ceramics: the lateral crack system. J. Am. Ceram. Soc. 1980, 65(11):561-566.
44. Lawn B.R., Evans A., Marshall D.B. Elastic/plastic indentation damage in ceramics: the median/radial crack system I'. J. Am. Ceram. Soc. 1980, 63(9-10):574-581.
45. Lee M., Dunn J.C.Y., Wu B.M. Scaffold fabrication by indirect three-dimensional printing. Biomaterials 2005, 26(20):4281-4289. Jul.
46. Li H., Xu Z.-H., Li X. Multiscale hierarchical assembly strategy and mechanical prowess in conch shells (Busycon carica). J. Struct. Biol. 2013, 184(3):409-416. Dec.
47. Lubliner J., Taylor R., Auricchio F. A new model of generalized plasticity and its numerical implementation. Int. J. Solids Struct. 1993, 30(22):3171-3184.
48. Marshall D., Lawn B. Residual stress effects in sharp contact cracking. J. Mater. Sci. 1979, 14(1979).
49. Melchels F.P.W., Domingos M.a.N., Klein T.J., Malda J., Bartolo P.J., Hutmacher D.W. Additive manufacturing of tissues and organs. Prog. Polym. Sci. 2012, 37(8):1079-1104. Aug.
50. Meyers M.A., Chen P.-Y., Lin A.Y.-M., Seki Y. Biological materials: structure and mechanical properties. Prog. Mater. Sci. 2008, 53(1):1-206. Jan.
51. Miserez A., Weaver J. Effects of laminate architecture on fracture resistance of sponge biosilica: lessons from nature. Adv. Funct. Mater. 2008, 18(8):1241-1248. Apr.
52. Musil J., Kunc F., Zeman H., Polakova H. Relationships Between Hardness, Young' s Modulus and Elastic Recovery in Hard Nanocomposite Coatings. Surf. Coat. Technol. 2002, 154:304-313.
53. Niihara K., Morena R., Hasselman D. Evaluation of KIc of brittle solids by the indentation method with low crack-to-indent ratios. J. Mater. Sci. Lett. 1982, 1:13-16.
54. Nikolov S., Petrov M., Lymperakis L., Friák M., Sachs C., Fabritius H.-O., Raabe D., Neugebauer J. Revealing the design principles of high-performance biological composites using ab initio and multiscale simulations: the example of lobster cuticle. Adv. Mater. 2010, 22(4):519-526. Jan.
55. Nikolov S., Fabritius H., Petrov M., Friák M., Lymperakis L., Sachs C., Raabe D., Neugebauer J. Robustness and optimal use of design principles of arthropod exoskeletons studied by ab initio-based multiscale simulations. J. Mech. Behav. Biomed. Mater. 2011, 4(2):129-145. Feb.
56. Norotte C., Marga F.S., Niklason L.E., Forgacs G. Scaffold-free vascular tissue engineering using bioprinting. Biomaterials 2009, 30(30):5910-5917. Oct.
57. Palmqvist S. Occurrence of crackformation during Vickers indentation as a measure of toughness of hard materials. Arch. Eisenhuettenwes 1962, 33:333-629.
58. Pharr G.M. Measurement of mechanical properties by ultra-low load indentation. Mater. Sci. Eng., A 1998, 253(1-2):151-159. Sep.
59. Ponton C., Rawlings R.D. Vickers indentation fracture toughness test, Part 1: Review of literature and formulation of standardised indentation toughness equations. Mater. Sci. Technol. 1989, 5(September):865-872.
60. Poon B., Rittel D., Ravichandran G. An analysis of nanoindentation in linearly elastic solids. Int. J. Solids Struct. 2008, 45(24):6018-6033. Dec.
61. Qi, H.J., Bruet, B.J.F., Palmer, J.S., Ortiz, C., Boyce, M.C., Micromechanics and Macromechanics of the Tensile Deformation of Nacre. pp. 1-15.
62. Raabe D., Romano P., Sachs C., Fabritius H., Al-Sawalmih a., Yi S.B., Servos G., Hartwig H.G. Microstructure and crystallographic texture of the chitin-protein network in the biological composite material of the exoskeleton of the lobster Homarus americanus. Mater. Sci. Eng., A 2006, 421:143-153.
63. Reuss A., Angew Z. Berechnung der Flie grenze von Mischkristallen auf Grund der Plastizit tsbedingung für Einkristalle. ZAMM-J. Appl. Math. Mech. 1929, 9:49-58.
64. Rim J.E., Zavattieri P., Juster A., Espinosa H.D. Dimensional analysis and parametric studies for designing artificial nacre. J. Mech. Behav. Biomed. Mater. 2011, 4(2):190-211. Feb.
65. Ritchie R.O. The conflicts between strength and toughness. Nat. Mater. 2011, 10(11):817-822. Nov.
66. Sachs C., Fabritius H., Raabe D. Influence of microstructure on deformation anisotropy of mineralized cuticle from the lobster Homarus americanus. J. Struct. Biol. 2008, 161:120-132.
67. Shtansky D., Kulinich S., Levashov E., Sheveiko a., Kiriuhancev F., Moore J. Localized deformation of multicomponent thin films. Thin Solid Films 2002, 420-421:330-337. Dec.
68. Su X.-W., Zhang D.-M., Heuer a.H. Tissue regeneration in the shell of the giant queen conch, Strombus gigas. Chem. Mater. 2004, 16(4):581-593. Feb.
69. Timoshenko S.P., Gere J.M. Theory of Elastic Stability 1961, 541. McGraw-Hill. second ed.
70. Tsai M., Oplinger D., Morton J. Improved theoretical solutions for adhesive lap joints. Int. J. Solids Struct. 1998, 35(12):1163-1185.
71. Tsui T.Y., Pharr G.M., Oliver W.C., Bhatia C.S., White R.L., Andres S., Anders A., Brown I.G. Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks, MRS Proc. 1995, 383:447-452.
72. Voigt W. Uber die Beziehung zwischen den beiden Elastizitatskonstanten isotroper Korper. Philos. Trans. 1889, 38:573-587.
73. Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 1992, 7(6):1564-1583.
74. Wang L., Song J., Ortiz C., Boyce M.C. Anisotropic design of a multilayered biological exoskeleton. J. Mater. Res. 2011, 24(12):3477-3494. Jan.
75. Wang Q., Nemoto M., Li D., Weaver J.C., Weden B., Stegemeier J., Bozhilov K.N., Wood L.R., Milliron G.W., Kim C.S., DiMasi E., Kisailus D. Phase transformations and structural developments in the radular teeth of Cryptochiton stelleri. Adv. Funct. Mater. 2013, 23:2908-2917. Jan.
76. Weaver J.C., Wang Q., Miserez A., Tantuccio A., Stromberg R., Bozhilov K.N., Maxwell P., Nay R., Heier S.T., DiMasi E., Kisailus D. Analysis of an ultra hard magnetic biomineral in chiton radular teeth. Mater. Today 2010, 13(1-2):42-52. Jan.
77. Weaver J.C., Milliron G.W., Miserez A., Evans-Lutterodt K., Herrera S., Gallana I., Mershon W.J., Swanson B., Zavattieri P., DiMasi E., Kisailus D. The stomatopod dactyl club: a formidable damage-tolerant biological hammer. Science 2012, 336(6086):1275-1280. Jun.
78. Wegst U.G.K., Bai H., Saiz E., Tomsia A.P., Ritchie R.O. Bioinspired structural materials. Nat. Mater. 2014, (October):1-14. Oct.
79. Weinkamer R., Fratzl P. Mechanical adaptation of biological materials-the examples of bone and wood. Mater. Sci. Eng. C 2011, 31(6):1164-1173. Aug.
80. White S.N., Luo W., Paine M.L., Fong H., Sarikaya M., Snead M.L. Biological organization of hydroxyapatite crystallites into a fibrous continuum toughens and controls anisotropy in human enamel. J. Dent. Res. 2001, 80(1):321-326. Jan.
81. Yahyazadehfar M., Bajaj D., Arola D.D. Hidden contributions of the enamel rods on the fracture resistance of human teeth. Acta Biomater. 2013, 9(1):4806-4814. Jan.
82. Yang W., Chen I.H., Gludovatz B., Zimmermann E.a., Ritchie R.O., Meyers M.a. Natural flexible dermal armor. Adv. Mater. 2013, 25(1):31-48. Jan.
83. Yang X., Liu X., Huang Z., Yao X., Liu G. Vickers indentation crack analysis of solid-phase-sintered silicon carbide ceramics. Ceram. Int. 2013, 39(1):841-845. Jan.
84. O. Zienkiewicz, R. Taylor, The Finite Element Method, May. 1977.
85. Zimmermann E.a., Gludovatz B., Schaible E., Dave N.K.N., Yang W., Meyers M.a., Ritchie R.O. Mechanical adaptability of the Bouligand-type structure in natural dermal armour. Nat. Commun. 2013, 4(May):2634. Oct.
86. Zok F.W., Miserez a. Property maps for abrasion resistance of materials. Acta Mater. 2007, 55(18):6365-6371. Oct.
87. Anon http://www.geodict.de/.
88. Anon http://www.stratasys.com.
89. van der Wal P. structural and material design of mature mineralized radula teeth of patella vulgata (Gastropoda). J. Ultrastruct. Mol. Struct. Res. 1989, (102):147-161.
90. van der Wal P., Giesen H.J., Videler J.J. Radular teeth as models for the improvement of industrial cutting devices. Mater. Sci. Eng. C 2000, 7(2):129-142. Feb.