Microstructural evolution of a nickel-based superalloy during hot deformation

Materials and Design

Volumn 77, Issue , 2015, Pages 41-49

  Chen, Xiao Min ^a   Lin, Y C ^a   Chen, Ming Song ^a   Li, Hong Bin ^b   Wen, Dong Xu ^a   Zhang, Jin Long ^a   He, Min ^a  

^a CENTRAL SOUTH UNIVERSITY   (China)

^b HEBEI UNITED UNIVERSITY   (China)

Author keywords

Alloy; Dynamic recrystallization; Hot deformation; Microstructural evolution

Indexed keywords

ALLOYING; CRYSTAL MICROSTRUCTURE; DEFORMATION; DYNAMIC RECRYSTALLIZATION; HOT WORKING; MICROSTRUCTURAL EVOLUTION; NICKEL; RECRYSTALLIZATION (METALLURGY); SUPERALLOYS; TRANSMISSION ELECTRON MICROSCOPY;

DEFORMATION DEGREES; DEFORMATION PARAMETER; DEFORMATION TEMPERATURES; DISLOCATION NETWORKS; DISLOCATION SUBSTRUCTURES; HIGH DISLOCATION DENSITY; LOW STRAIN RATES; NICKEL- BASED SUPERALLOYS;

STRAIN RATE;

EID: 84928169198     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2015.04.004     Document Type: Article

References (61)

1. Lin Y.C., Chen X.M. A critical review of experimental results and constitutive descriptions for metals and alloys in hot working. Mater. Des. 2011, 32:1733-1759.
2. Gangolu S., Rao A.G., Prabhu N., Deshmukh V.P., Kashyap B.P. Hot workability and flow characteristics of aluminum-5wt.% B4C composite. J. Mater. Eng. Perform. 2014, 23:1366-1373.
3. Samantaray D., Mandal S., Bhaduri A.K. Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr-1Mo (P91) steel employing dynamic materials model. Mater. Sci. Eng. A 2011, 528:5204-5211.
4. Park H.S., Anh T.V. Development of two-phase neural network-genetic algorithm hybrid model in modeling damage evolution in roll forming of aluminum sheet. Int. J. Mater. Form. 2013, 6:423-436.
5. Opiela M. Effect of thermomechanical processing on the microstructure and mechanical properties of Nb-Ti-V microalloyed steel. J. Mater. Eng. Perform. 2014, 23:3379-3388.
6. Yin F., Hua L., Mao H.J., Han X.H., Qian D.S., Zhang R. Microstructural modeling and simulation for GCr15 steel during elevated temperature deformation. Mater. Des. 2014, 55:560-573.
7. Chen X.M., Lin Y.C., Wen D.X., Zhang J.L., He M. Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation. Mater. Des. 2014, 57:568-577.
8. Shen Y.F., Xue W.Y., Guo Y.H. Effect of cold rolling and annealing on texture evolution and mechanical properties of IF steel sheet. Steel Res. Int. 2010, 81:146-149.
9. Marandi A., Zarei-Hanzaki A., Haghdadi N., Eskandari M. The prediction of hot deformation behavior in Fe-21Mn-2.5Si-1.5Al transformation-twinning induced plasticity steel. Mater. Sci. Eng. A 2012, 554:72-78.
10. Puchi-Cabrera E.S., Staia M.H., Guérin J.D., Lesage J., Dubar M., Chicot D. An experimental analysis and modeling of the work-softening transient due to dynamic recrystallization. Int. J. Plasticity 2014, 54:113-131.
11. Lin Y.C., Li L.T., Xia Y.C., Jiang Y.Q. Hot deformation and processing map of a typical Al-Zn-Mg-Cu alloy. J. Alloys Compd. 2013, 550:438-445.
12. Chen F., Cui Z.S., Chen S. Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part I: Dynamic recrystallization. Mater. Sci. Eng. A 2011, 528:5073-5080.
13. Chen F., Cui Z.S., Liu J., Chen W., Chen S. Mesoscale simulation of the high-temperature austenitizing and dynamic recrystallization by coupling a cellular automaton with a topology deformation technique. Mater. Sci. Eng. A 2010, 527:5539-5549.
14. Quan G.Z., Mao Y.P., Li G.S., Lv W.Q., Wang Y., Zhou J. A characterization for the dynamic recrystallization kinetics of as-extruded 7075 aluminum alloy based on true stress-strain curves. Comput. Mater. Sci. 2012, 55:65-72.
15. Lin Y.C., Chen M.S., Zhong J. Numerical simulation for stress/strain distribution and microstructural evolution in 42CrMo steel during hot upsetting process. Comput. Mater. Sci. 2008, 43:1117-1122.
16. Chen M.S., Lin Y.C., Ma X.S. The kinetics of dynamic recrystallization of 42CrMo steel. Mater. Sci. Eng. A 2012, 556:260-266.
17. Quan G.Z., Wang Y., Liu Y.Y., Zhou J. Effect of temperatures and strain rates on the average size of grains refined by dynamic recrystallization for as-extruded 42CrMo Steel. Mater. Res. 2013, 16:1092-1105.
18. Li D.Z., Wei Y.H., Liu C.Y., Hou L.F. Hot deformation behaviors of Fe-30Mn-3Si-3Al TWIP steel during compression at elevated temperature and strain rate. Steel Res. Int. 2013, 84:740-750.
19. Chen J., Lv M.Y., Tang S., Liu Z.Y., Wang G.D. Low-carbon bainite steel with high strength and toughness processed by recrystallization controlled rolling and ultra fast cooling (RCR+UFC). ISIJ Int. 2014, 54:2926-2932.
20. Wang L., Qian D.S., Guo J. Austenite grain growth behavior of AISI 4140 alloy steel. Adv. Mech. Eng. 2013, (Article ID 762890).
21. Torabinejad V., Zarei-Hanzaki A., Moemeni S. An analysis to the kinetics of austenite recrystallization in Fe-30Mn-5Al steel. Mater. Manuf. Process. 2012, 28:36-41.
22. Mirzadeh H., Parsa M.H., Ohadi D. Hot deformation behavior of austenitic stainless steel for a wide range of initial grain size. Mater. Sci. Eng. A 2013, 569:54-60.
23. Samantaray D., Mandal S., Phaniraj C., Bhaduri A.K. Flow behavior and microstructural evolution during hot deformation of AISI Type 316L(N) austenitic stainless steel. Mater. Sci. Eng. A 2011, 528:8565-8572.
24. Sajadifar S.V., Yapici G.G. Elevated temperature mechanical behavior of severely deformed titanium. J. Mater. Eng. Perform. 2014, 23:1834-1844.
25. Momeni A., Kazemi S., Ebrahimi G., Maldar A. Dynamic recrystallization and precipitation in high manganese austenitic stainless steel during hot compression. Int. J. Min. Met. Mater. 2014, 21:36-45.
26. Sajadifar S.V., Ketabchi M., Nourani M. Modeling of mechanical characteristics in hot deformation of 4130 steel. Steel Res. Int. 2011, 82:934-939.
27. Sajadifar S.V., Ketabchi M., Bemanizadeh B. Dynamic recrystallization behavior and hot deformation characteristics in 4340 steel. Metallurgist 2012, 56:310-320.
28. Ferdowsi M.R.G., Nakhaie D., Benhangi P.H., Ebrahimi G.R. Modeling the high temperature flow behavior and dynamic recrystallization kinetics of a medium carbon microalloyed steel. J. Mater. Eng. Perform. 2014, 23:1077-1087.
29. Wen D.X., Lin Y.C., Li H.B., Chen X.M., Deng J., Li L.T. Hot deformation behavior and processing map of a typical Ni-based superalloy. Mater. Sci. Eng. A 2014, 59:183-192.
30. Shore M.F., Morakabati M., Abbasi S.M., Momeni A. Hot deformation behavior of Incoloy 901 through hot tensile testing. J. Mater. Eng. Perform. 2014, 23:1424-1433.
31. Lin Y.C., Deng J., Jiang Y.Q., Wen D.X., Liu G. Effects of initial δ phase on the hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy. Mater. Sci. Eng. A 2014, 598:251-262.
32. Ning Y.Q., Fu M.W., Chen X. Hot deformation behavior of GH4169 superalloy associated with stick δ phase dissolution during isothermal compression process. Mater. Sci. Eng. A 2012, 540:164-173.
33. Lin Y.C., Deng J., Jiang Y.Q., Wen D.X., Liu G. Hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy. Mater. Des. 2014, 55:949-957.
34. Etaati A., Dehghani K., Ebrahimi G.R., Wang H. Predicting the flow stress behavior of Ni-42.5Ti-3Cu during hot deformation using constitutive equations. Met. Mater. Int. 2013, 19:5-9.
35. Etaati A., Dehghani K. A study on hot deformation behavior of Ni-42.5Ti-7.5Cu alloy. Mater. Chem. Phys. 2013, 140:208-215.
36. Ning Y.Q., Yao Z.K., Lei Y.Y., Guo H.Z., Fu M.W. Hot deformation behavior of the post-cogging FGH4096 superalloy with fine equiaxed microstructure. Mater. Charact. 2011, 62:887-889.
37. Wu K., Liu G.Q., Hua B.F., Wang C.Y., Zhang Y.W., Tao Y., Liu J.T. Effect of processing parameters on hot compressive deformation behavior of a new Ni-Cr-Co based P/M superalloy. Mater. Sci. Eng. A 2011, 528:4620-4629.
38. Zhang C., Zhang L.W., Li M.F., Shen W.F., Gu S.D. Effects of microstructure and γ' distribution on the hot deformation behavior for a powder metallurgy superalloy FGH96. J. Mater. Res. 2014, 29:2799-2808.
39. Wang L., Liu F., Cheng J.J., Zuo Q., Chen C.F. Hot deformation characteristics and processing map analysis for nickel-based corrosion resistant alloy. J. Alloys Compd. 2015, 623:69-78.
40. Antonov S., Detrois M., Helmink R.C., Tin S. Precipitate phase stability and compositional dependence on alloying additions in γ-γ'-δ-η Ni-base superalloys. J. Alloys Compd. 2015, 626:76-86.
41. Ebrahimi R., Najafizadeh A. A new method for evaluation of friction in bulk metal forming. J. Mater. Process. Technol. 2004, 152:136-143.
42. Bedir F. Modeling approach and plastic deformation analysis of 6063 aluminum alloy during compression at elevated temperatures. Mater. Des. 2013, 49:953-956.
43. Zhou M., Lin Y.C., Deng J., Jiang Y.Q. Hot tensile deformation behaviors and constitutive model of an Al-Zn-Mg-Cu alloy. Mater. Des. 2014, 59:141-150.
44. Ponge D., Gottstein G. Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior. Acta Mater. 1997, 46:69-80.
45. Lin D.L., Hu J., Jiang D.M. Superplasticity of Ni-rich single phase NiAl intermetallics with large grains. Intermetallics 2005, 13:343-349.
46. Momeni A., Ebrahimi G.R., Jahazi M., Bocher P. Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size. J. Alloys Compd. 2014, 587:199-210.
47. Mirzadeh H., Najafizadeh A. Hot deformation and dynamic recrystallization of 17-4 PH stainless steel. ISIJ Int. 2013, 53:680-689.
48. Mandal S., Jayalakshmi M., Bhaduri A.K., Sarma V.S. Effect of strain rate on dynamic recrystallization behavior in a nitrogen enhanced 316L(N). Metall. Mater. Trans. A 2014, 45:5645-5656.
49. Mandal S., Bhaduri A.K., Sarma V.S. Influence of state-of-stress on dynamic recrystallization in a Ti modified austenitic stainless steel. Metall. Mater. Trans. A 2012, 43:410-414.
50. Shimizu I. Theories and applicability of grain size piezometers: the role of dynamic recrystallization mechanisms. J. Struct. Geol. 2008, 30:899-917.
51. Jorge A.M., Regone W., Balancin O. Effect of competing hardening and softening mechanisms on the flow stress curve modeling of ultra-low carbon steel at high temperatures. J. Mater. Process. Technol. 2003, 142:415-421.
52. Mecking H., Kocks U.F. Kinetics of flow and strain-hardening. Acta Metall. 1981, 29:1865-1875.
53. Mandal S., Sivaprasad P.V., Dube R.K. Kinetics, mechanism and modeling of microstructural evolution during thermo-mechanical processing of a 15Cr-15Ni-2.2Mo-Ti modified austenitic stainless steel. J. Mater. Sci. 2007, 42:2724-2734.
54. Momeni A., Dehghani K., Ebrahimi G.R. Modeling the initiation of dynamic recrystallization using a dynamic recovery model. J. Alloys Compd. 2011, 509:9387-9393.
55. Rollett A., Humphreys F.J., Rohrer G.S., Hatherly M. Recrystallization and Related Annealing Phenomena 2004, Elsevier.
56. Ding R., Guo Z.X. Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization. Acta Mater. 2001, 49:3163-3175.
57. Mandal S., Mishra S.K., Kumar A., Samajdar I., Sivaprasad P.V., Jayakumar T., Raj B. Evolution and characterization of dynamically recrystallized microstructure in a Ti modified austenitic stainless steel using ultrasonic and EBSD techniques. Philos. Mag. 2008, 88:883-897.
58. Mandal S., Bhaduri A.K., Sarma V.S. A study on microstructural evolution and dynamic recrystallization during isothermal deformation of a Ti-modified austenitic stainless steel. Metall. Mater. Trans. A 2011, 42:1062-1072.
59. p reinforced Mg matrix composite. Mater. Sci. Eng. A 2013, 560:824-830.
60. Yue C.X., Zhang L.W., Ruan J.H., Gao H.J. Modelling of recrystallization behavior and austenite grain size evolution during the hot rolling of GCr15 rod. Appl. Math. Model. 2010, 34:2644-2653.
61. Yeom J.T., Lee C.S., Kim J.H., Park N.K. Finite-element analysis of microstructure evolution in the cogging of an Alloy 718 ingot. Mater. Sci. Eng. A 2007, 565:722-726.