-
1
-
-
78149443086
-
Thermo-Mechanical Finite Element Analysis Incorporating the Temperature Dependent Stress-Strain Response of Low Alloy Steel for Practical Application to the Hot Stamped Part
-
10.1007/s12540-010-0405-0
-
H.H. Bok, M.G. Lee, H.D. Kim, and M.B. Moon, Thermo-Mechanical Finite Element Analysis Incorporating the Temperature Dependent Stress-Strain Response of Low Alloy Steel for Practical Application to the Hot Stamped Part, Met. Mater. Int., 2010, 16, p 185-195
-
(2010)
Met. Mater. Int.
, vol.16
, pp. 185-195
-
-
Bok, H.H.1
Lee, M.G.2
Kim, H.D.3
Moon, M.B.4
-
2
-
-
79951772160
-
Optimization of Forging Processes Using Finite Element Simulations
-
10.1007/s00158-010-0545-3
-
M.A. Bonte, L. Fourment, T.T. Do, A.H. Boogaard, and J. Huétink, Optimization of Forging Processes Using Finite Element Simulations, Struct. Multidiscip. Optim., 2010, 42, p 797-810
-
(2010)
Struct. Multidiscip. Optim.
, vol.42
, pp. 797-810
-
-
Bonte, M.A.1
Fourment, L.2
Do, T.T.3
Boogaard, A.H.4
Huétink, J.5
-
3
-
-
58649098750
-
Prediction of Influence Parameters on the Hot Rolling Process Using Finite Element Method and Neural Network
-
10.1016/j.jmatprotec.2008.04.055
-
A.R. Shahani, S. Setayeshi, S.A. Nodamaie, M.A. Asadi, and S. Rezaie, Prediction of Influence Parameters on the Hot Rolling Process Using Finite Element Method and Neural Network, J. Mater. Process Technol., 2009, 209, p 1920-1935
-
(2009)
J. Mater. Process Technol.
, vol.209
, pp. 1920-1935
-
-
Shahani, A.R.1
Setayeshi, S.2
Nodamaie, S.A.3
Asadi, M.A.4
Rezaie, S.5
-
4
-
-
42049110588
-
Constitutive Modeling for Elevated Temperature Flow Behavior of 42CrMo Steel
-
10.1016/j.commatsci.2007.08.011
-
Y.C. Lin, M.S. Chen, and J. Zhong, Constitutive Modeling for Elevated Temperature Flow Behavior of 42CrMo Steel, Comput. Mater. Sci., 2008, 42, p 470-477
-
(2008)
Comput. Mater. Sci.
, vol.42
, pp. 470-477
-
-
Lin, Y.C.1
Chen, M.S.2
Zhong, J.3
-
5
-
-
79251648020
-
A Critical Review of Experimental Results and Constitutive Descriptions for Metals and Alloys in Hot Working
-
10.1016/j.matdes.2010.11.048
-
Y.C. Lin and X.M. Chen, A Critical Review of Experimental Results and Constitutive Descriptions for Metals and Alloys in Hot Working, Mater. Des., 2011, 32, p 1733-1759
-
(2011)
Mater. Des.
, vol.32
, pp. 1733-1759
-
-
Lin, Y.C.1
Chen, X.M.2
-
6
-
-
0001600141
-
On the Mechanism of Hot Deformation
-
10.1016/0001-6160(66)90207-0
-
C.M. Sellars and W.J. McTegart, On the Mechanism of Hot Deformation, Acta Metal., 1966, 14, p 1136-1138
-
(1966)
Acta Metal.
, vol.14
, pp. 1136-1138
-
-
Sellars, C.M.1
McTegart, W.J.2
-
7
-
-
0036680568
-
Flow Stress Behavior and Deformation Characteristics of Ti-3Al-5V-5Mo Compressed at Elevated Temperatures
-
10.1016/S0261-3069(02)00025-0
-
L.X. Li, Y. Lou, L.B. Yang, D.S. Peng, and K.P. Rao, Flow Stress Behavior and Deformation Characteristics of Ti-3Al-5V-5Mo Compressed at Elevated Temperatures, Mater. Des., 2002, 23, p 451-457
-
(2002)
Mater. Des.
, vol.23
, pp. 451-457
-
-
Li, L.X.1
Lou, Y.2
Yang, L.B.3
Peng, D.S.4
Rao, K.P.5
-
8
-
-
78650511748
-
Hot Deformation Behavior of Austenite in HSLA-100 Microalloyed Steel
-
10.1016/j.msea.2010.11.062
-
A. Momeni, H. Arabi, A. Rezaei, H. Badri, and S.M. Abbasi, Hot Deformation Behavior of Austenite in HSLA-100 Microalloyed Steel, Mater. Sci. Eng. A, 2011, 528, p 2158-2163
-
(2011)
Mater. Sci. Eng. A
, vol.528
, pp. 2158-2163
-
-
Momeni, A.1
Arabi, H.2
Rezaei, A.3
Badri, H.4
Abbasi, S.M.5
-
9
-
-
0029696589
-
Hot Deformation Studies on a Low-Carbon Steel: Part 1 - Flow Curves and the Constitutive Relationship
-
10.1016/0924-0136(95)01902-2
-
K.P. Rao, Y.K.D.V. Prasad, and E.B. Hawbolt, Hot Deformation Studies on a Low-Carbon Steel: Part 1 - Flow Curves and the Constitutive Relationship, J. Mater. Process Technol., 1996, 56, p 897-907
-
(1996)
J. Mater. Process Technol.
, vol.56
, pp. 897-907
-
-
Rao, K.P.1
Prasad, Y.2
Hawbolt, E.B.3
-
10
-
-
78649844267
-
Constitutive Equations for Elevated Temperature Flow Stress of Ti-6Al-4V Alloy Considering the Effect of Strain
-
10.1016/j.matdes.2010.11.004
-
J. Cai, F. Li, T. Liu, B. Chen, and M. He, Constitutive Equations for Elevated Temperature Flow Stress of Ti-6Al-4V Alloy Considering the Effect of Strain, Mater. Des., 2011, 32, p 1144-1151
-
(2011)
Mater. Des.
, vol.32
, pp. 1144-1151
-
-
Cai, J.1
Li, F.2
Liu, T.3
Chen, B.4
He, M.5
-
11
-
-
84859998611
-
The High Temperature Flow Behavior Modeling of AZ81 Magnesium Alloy Considering Strain Effects
-
10.1016/j.matdes.2012.02.049
-
P. Changizian, A. Zarei-Hanzaki, and A.A. Roostaei, The High Temperature Flow Behavior Modeling of AZ81 Magnesium Alloy Considering Strain Effects, Mater. Des., 2012, 39, p 384-389
-
(2012)
Mater. Des.
, vol.39
, pp. 384-389
-
-
Changizian, P.1
Zarei-Hanzaki, A.2
Roostaei, A.A.3
-
12
-
-
84862817839
-
Modeling the Constitutive Relationship of Cr20Ni25Mo4Cu Superaustenitic Stainless Steel during Elevated Temperature
-
10.1016/j.msea.2012.01.036
-
Y. Han, G. Qiao, Y. Sun, and D. Zou, Modeling the Constitutive Relationship of Cr20Ni25Mo4Cu Superaustenitic Stainless Steel During Elevated Temperature, Mater. Sci. Eng. A, 2012, 539, p 61-67
-
(2012)
Mater. Sci. Eng. A
, vol.539
, pp. 61-67
-
-
Han, Y.1
Qiao, G.2
Sun, Y.3
Zou, D.4
-
13
-
-
56949106936
-
Constitutive Equations to Predict High Temperature Flow Stress in a Ti-Modified Austenitic Stainless Steel
-
10.1016/j.msea.2008.09.019
-
S. Mandal, V. Rakesh, P.V. Sivaprasad, S. Venugopal, and K.V. Kasiviswanathan, Constitutive Equations to Predict High Temperature Flow Stress in a Ti-Modified Austenitic Stainless Steel, Mater. Sci. Eng. A, 2009, 500, p 114-121
-
(2009)
Mater. Sci. Eng. A
, vol.500
, pp. 114-121
-
-
Mandal, S.1
Rakesh, V.2
Sivaprasad, P.V.3
Venugopal, S.4
Kasiviswanathan, K.V.5
-
14
-
-
33745438763
-
Modelling of Dynamic Recrystallisation Kinetics in Austenitic Stainless and Hypereutectoid Steels
-
10.1179/026708306X81478
-
G.R. Stewart, A.M. Elwazri, S. Yue, and J.J. Jonas, Modelling of Dynamic Recrystallisation Kinetics in Austenitic Stainless and Hypereutectoid Steels, Mater. Sci. Technol., 2006, 22, p 519-524
-
(2006)
Mater. Sci. Technol.
, vol.22
, pp. 519-524
-
-
Stewart, G.R.1
Elwazri, A.M.2
Yue, S.3
Jonas, J.J.4
-
15
-
-
13944274231
-
Modelling of Dynamic and Metadynamic Recrystallisation during Bar Rolling of a Medium Carbon Spring Steel
-
10.1016/j.jmatprotec.2004.06.016
-
J.H. Bianchi and L.P. Karjalainen, Modelling of Dynamic and Metadynamic Recrystallisation During Bar Rolling of a Medium Carbon Spring Steel, J. Mater. Process. Technol., 2005, 160, p 267-277
-
(2005)
J. Mater. Process. Technol.
, vol.160
, pp. 267-277
-
-
Bianchi, J.H.1
Karjalainen, L.P.2
-
16
-
-
0042411141
-
Study on Constitutive Relation of AISI 4140 Steel Subject to Large Strain at Elevated Temperatures
-
10.1016/S0924-0136(03)00742-8
-
S.I. Kim, Y. Lee, and S.M. Byon, Study on Constitutive Relation of AISI, 4140 Steel Subject to Large Strain at Elevated Temperatures, J. Mater. Process. Technol., 2003, 140, p 84-89
-
(2003)
J. Mater. Process. Technol.
, vol.140
, pp. 84-89
-
-
Kim, S.I.1
Lee, Y.2
Byon, S.M.3
-
17
-
-
84864047304
-
Hot Deformation Behavior and Constitutive Modeling of VCN200 Low Alloy Steel
-
10.1016/j.apm.2012.01.008
-
A. Momeni, S.M. Abbasi, and H. Badri, Hot Deformation Behavior and Constitutive Modeling of VCN200 Low Alloy Steel, Appl. Math. Model., 2012, 36, p 5624-5632
-
(2012)
Appl. Math. Model.
, vol.36
, pp. 5624-5632
-
-
Momeni, A.1
Abbasi, S.M.2
Badri, H.3
-
18
-
-
75449087689
-
Hot Deformation Behavior and Microstructural Evolution of a Superaustenitic Stainless Steel
-
10.1016/j.msea.2009.10.051
-
A. Momeni, K. Dehghani, H. Keshmiri, and G.R. Ebrahimi, Hot Deformation Behavior and Microstructural Evolution of a Superaustenitic Stainless Steel, Mater. Sci. Eng. A, 2010, 527, p 1605-1611
-
(2010)
Mater. Sci. Eng. A
, vol.527
, pp. 1605-1611
-
-
Momeni, A.1
Dehghani, K.2
Keshmiri, H.3
Ebrahimi, G.R.4
-
19
-
-
72149123912
-
Prediction of the Critical Conditions for Initiation of Dynamic Recrystallization
-
10.1016/j.matdes.2009.09.038
-
H. Mirzadeh and A. Najafizadeh, Prediction of the Critical Conditions for Initiation of Dynamic Recrystallization, Mater. Des., 2010, 31, p 1174-1179
-
(2010)
Mater. Des.
, vol.31
, pp. 1174-1179
-
-
Mirzadeh, H.1
Najafizadeh, A.2
-
20
-
-
84859967998
-
Dynamic Recrystallization Kinetics Model of X70 Pipeline Steel
-
10.1016/j.matdes.2012.02.034
-
Y. Xu, D. Tang, Y. Song, and X. Pan, Dynamic Recrystallization Kinetics Model of X70 Pipeline Steel, Mater. Des., 2012, 39, p 168-174
-
(2012)
Mater. Des.
, vol.39
, pp. 168-174
-
-
Xu, Y.1
Tang, D.2
Song, Y.3
Pan, X.4
-
21
-
-
0029771565
-
A One-Parameter Approach to Determining the Critical Conditions for the Initiation of Dynamic Recrystallization
-
10.1016/1359-6454(95)00146-7
-
E.I. Poliak and J.J. Jonas, A One-Parameter Approach to Determining the Critical Conditions for the Initiation of Dynamic Recrystallization, Acta Mater., 1996, 44, p 127-136
-
(1996)
Acta Mater.
, vol.44
, pp. 127-136
-
-
Poliak, E.I.1
Jonas, J.J.2
-
22
-
-
77954817677
-
Quantitative Analysis of Dynamic Recrystallization Behavior Using a Grain Boundary Evolution Based Kinetic Model
-
10.1016/j.msea.2010.05.032
-
X.G. Fan, H. Yang, Z.C. Sun, and D.W. Zhang, Quantitative Analysis of Dynamic Recrystallization Behavior Using a Grain Boundary Evolution Based Kinetic Model, Mater. Sci. Eng. A, 2010, 527, p 5368-5377
-
(2010)
Mater. Sci. Eng. A
, vol.527
, pp. 5368-5377
-
-
Fan, X.G.1
Yang, H.2
Sun, Z.C.3
Zhang, D.W.4
-
23
-
-
80052021894
-
Modeling the Initiation of Dynamic Recrystallization Using a Dynamic Recovery Model
-
10.1016/j.jallcom.2011.07.014
-
A. Momeni, K. Dehghani, and G.R. Ebrahimi, Modeling the Initiation of Dynamic Recrystallization Using a Dynamic Recovery Model, J. Alloy Compd., 2011, 509, p 9387-9393
-
(2011)
J. Alloy Compd.
, vol.509
, pp. 9387-9393
-
-
Momeni, A.1
Dehghani, K.2
Ebrahimi, G.R.3
-
24
-
-
33846440125
-
Predicting the Critical Stress for Initiation of Dynamic Recrystallization
-
10.2355/isijinternational.46.1679
-
A. Najafizadeh and J.J. Jonas, Predicting the Critical Stress for Initiation of Dynamic Recrystallization, ISIJ Int., 2006, 46, p 1679-1684
-
(2006)
ISIJ Int.
, vol.46
, pp. 1679-1684
-
-
Najafizadeh, A.1
Jonas, J.J.2
-
25
-
-
64649104721
-
The Avrami Kinetics of Dynamic Recrystallization
-
10.1016/j.actamat.2009.02.033
-
J.J. Jonas, X. Quelennec, L. Jiang, and É. Martin, The Avrami Kinetics of Dynamic Recrystallization, Acta Mater., 2009, 57, p 2748-2756
-
(2009)
Acta Mater.
, vol.57
, pp. 2748-2756
-
-
Jonas, J.J.1
Quelennec, X.2
Jiang, L.3
Martin, É.4
-
26
-
-
10644290093
-
Development of Dynamic Recrystallization Theory
-
10.1016/j.msea.2004.01.064
-
H.J. McQueen, Development of Dynamic Recrystallization Theory, Mater. Sci. Eng. A, 2004, 387-389, p 203-208
-
(2004)
Mater. Sci. Eng. A
, vol.387-389
, pp. 203-208
-
-
McQueen, H.J.1
-
27
-
-
77954145796
-
The Rate of Dynamic Recrystallization in 17-4 PH Stainless Steel
-
10.1016/j.matdes.2010.05.052
-
H. Mirzadeh and A. Najafizadeh, The Rate of Dynamic Recrystallization in 17-4 PH Stainless Steel, Mater. Des., 2010, 31, p 4577-4583
-
(2010)
Mater. Des.
, vol.31
, pp. 4577-4583
-
-
Mirzadeh, H.1
Najafizadeh, A.2
-
28
-
-
84894869393
-
Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
-
ASTM International E209
-
ASTM International E209, Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates. Annual Book of ASTM Standards, Vol 03.01, 2010
-
(2010)
Annual Book of ASTM Standards
, vol.301
-
-
-
30
-
-
0037413787
-
Dynamic Recrystallization of Austenite in Microalloyed High Carbon Steels
-
10.1016/S0921-5093(02)00164-8
-
A.M. Elwazri, P. Wanjara, and S. Yue, Dynamic Recrystallization of Austenite in Microalloyed High Carbon Steels, Mater. Sci. Eng. A, 2003, 339, p 209-215
-
(2003)
Mater. Sci. Eng. A
, vol.339
, pp. 209-215
-
-
Elwazri, A.M.1
Wanjara, P.2
Yue, S.3
-
31
-
-
84870418201
-
Controlled Forging of a Nb Containing Microalloyed Steel for Automotive Applications
-
D. Nakhaie, P. Hosseini Benhangi, F. Fazeli, M. Mazinani, E. Zohourvahid Karimi, M.R. Ghandehari Ferdowsi, Controlled Forging of a Nb Containing Microalloyed Steel for Automotive Applications, Metal. Mater. Trans. A, 2012, 43, 5209-5217
-
(2012)
Metal. Mater. Trans. A
, vol.43
, pp. 5209-5217
-
-
Nakhaie, D.1
Hosseini Benhangi, P.2
Fazeli, F.3
Mazinani, M.4
Zohourvahid Karimi, E.5
Ghandehari Ferdowsi, M.R.6
-
32
-
-
77952877795
-
Determination of Critical Conditions for Dynamic Recrystallization of a Microalloyed Steel
-
10.1016/j.msea.2010.03.086
-
M. Shaban and B. Eghbali, Determination of Critical Conditions for Dynamic Recrystallization of a Microalloyed Steel, Mater. Sci. Eng. A, 2010, 527, p 4320-4325
-
(2010)
Mater. Sci. Eng. A
, vol.527
, pp. 4320-4325
-
-
Shaban, M.1
Eghbali, B.2
-
33
-
-
0020735384
-
Dynamic Recrystallization during the Transient Deformation of a Vanadium Microalloyed Steel
-
10.1016/0001-6160(83)90053-6
-
T. Sakai, M.G. Akben, and J.J. Jonas, Dynamic Recrystallization During the Transient Deformation of a Vanadium Microalloyed Steel, Acta Metall., 1983, 31, p 631-641
-
(1983)
Acta Metall.
, vol.31
, pp. 631-641
-
-
Sakai, T.1
Akben, M.G.2
Jonas, J.J.3
-
34
-
-
0037081640
-
Constitutive Analysis in Hot Working
-
10.1016/S0921-5093(01)01117-0
-
H.J. McQueen and N.D. Ryan, Constitutive Analysis in Hot Working, Mater. Sci. Eng. A, 2002, 322, p 43-63
-
(2002)
Mater. Sci. Eng. A
, vol.322
, pp. 43-63
-
-
McQueen, H.J.1
Ryan, N.D.2
-
35
-
-
4344587864
-
Hot Working and Multipass Deformation of a 41Cr4 Steel
-
10.1016/j.jallcom.2003.11.170
-
E. Evangelista, M. Masini, M. El Mehtedi, and S. Spigarelli, Hot Working and Multipass Deformation of a 41Cr4 Steel, J. Alloy Compd., 2004, 378, p 151-154
-
(2004)
J. Alloy Compd.
, vol.378
, pp. 151-154
-
-
Evangelista, E.1
Masini, M.2
El Mehtedi, M.3
Spigarelli, S.4
-
36
-
-
63249114319
-
Optimization of Mechanical Properties of a Micro Alloyed Steel
-
10.1016/j.matdes.2008.08.024
-
D. Rasouli, S.K. Asl, A. Akbarzadeh, and G.H. Daneshi, Optimization of Mechanical Properties of a Micro Alloyed Steel, Mater. Des., 2009, 30, p 2167-2172
-
(2009)
Mater. Des.
, vol.30
, pp. 2167-2172
-
-
Rasouli, D.1
Asl, S.K.2
Akbarzadeh, A.3
Daneshi, G.H.4
-
37
-
-
0036570295
-
An Investigation on the Effect of Carbon and Silicon on Flow Behavior of Steel
-
10.1016/S0261-3069(01)00080-2
-
S. Serajzadeh and A. Karimi Taheri, An Investigation on the Effect of Carbon and Silicon on Flow Behavior of Steel, Mater. Des., 2002, 23, p 271-276
-
(2002)
Mater. Des.
, vol.23
, pp. 271-276
-
-
Serajzadeh, S.1
Karimi Taheri, A.2
-
38
-
-
0029779430
-
General Expression of the Zener-Hollomon Parameter as a Function of the Chemical Composition of Low Alloy and Microalloyed Steels
-
10.1016/1359-6454(95)00151-0
-
S.F. Medina and C.A. Hernandez, General Expression of the Zener-Hollomon Parameter as a Function of the Chemical Composition of Low Alloy and Microalloyed Steels, Acta Mater., 1996, 44, p 137-148
-
(1996)
Acta Mater.
, vol.44
, pp. 137-148
-
-
Medina, S.F.1
Hernandez, C.A.2
-
39
-
-
0035079101
-
The Dynamic, Static and Metadynamic Recrystallization of a Nb-Microalloyed Steel
-
10.2355/isijinternational.41.63
-
S.-H. Cho, K.-B. Kang, and J.J. Jonas, The Dynamic, Static and Metadynamic Recrystallization of a Nb-Microalloyed Steel, ISIJ Int., 2001, 41, p 63-69
-
(2001)
ISIJ Int.
, vol.41
, pp. 63-69
-
-
Cho, S.-H.1
Kang, K.-B.2
Jonas, J.J.3
-
40
-
-
44749090297
-
Effect of Temperature and Strain Rate on the Compressive Deformation Behavior of 42CrMo Steel
-
10.1016/j.jmatprotec.2007.11.113
-
Y.C. Lin, M.S. Chen, and J. Zhong, Effect of Temperature and Strain Rate on the Compressive Deformation Behavior of 42CrMo Steel, J. Mater. Process. Technol., 2008, 205, p 308-315
-
(2008)
J. Mater. Process. Technol.
, vol.205
, pp. 308-315
-
-
Lin, Y.C.1
Chen, M.S.2
Zhong, J.3
-
41
-
-
0037821214
-
Critical Strain for Dynamic Recrystallization in Variable Strain Rate Hot Deformation
-
10.2355/isijinternational.43.692
-
E.I. Poliak and J.J. Jonas, Critical Strain for Dynamic Recrystallization in Variable Strain Rate Hot Deformation, ISIJ Int., 2003, 43, p 692-700
-
(2003)
ISIJ Int.
, vol.43
, pp. 692-700
-
-
Poliak, E.I.1
Jonas, J.J.2
-
42
-
-
0037483691
-
Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation
-
10.2355/isijinternational.43.684
-
E.I. Poliak and J.J. Jonas, Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation, ISIJ Int., 2003, 43, p 684-691
-
(2003)
ISIJ Int.
, vol.43
, pp. 684-691
-
-
Poliak, E.I.1
Jonas, J.J.2
-
43
-
-
43149111820
-
Hot Deformation and Recrystallization of Austenitic Stainless Steel: Part I. Dynamic Recrystallization
-
A. Dehghan-Manshadi, M.R. Barnett, P.D. Hodgson, Hot Deformation and Recrystallization of Austenitic Stainless Steel: Part I. Dynamic Recrystallization, Metal. Mater. Trans. A, 2008, 39, 1359-1370
-
(2008)
Metal. Mater. Trans. A
, vol.39
, pp. 1359-1370
-
-
Dehghan-Manshadi, A.1
Barnett, M.R.2
Hodgson, P.D.3
-
44
-
-
84876300894
-
Hot Deformation Behavior of Two C-Mn-Si Based and C-Mn-Al Based Microalloyed High-Strength Steels: A Comparative Study
-
10.1016/j.matdes.2013.03.043
-
H.L. Wei, G.Q. Liu, H.T. Zhao, and R.M. Kang, Hot Deformation Behavior of Two C-Mn-Si Based and C-Mn-Al Based Microalloyed High-Strength Steels: A Comparative Study, Mater. Des., 2013, 50, p 484-490
-
(2013)
Mater. Des.
, vol.50
, pp. 484-490
-
-
Wei, H.L.1
Liu, G.Q.2
Zhao, H.T.3
Kang, R.M.4
-
45
-
-
0038268624
-
Modeling of AGS and Recrystallized Fraction of Microalloyed Medium Carbon Steel during Hot Deformation
-
10.1016/S0921-5093(03)00104-7
-
S.I. Kim, Y. Lee, D.L. Lee, and Y.C. Yoo, Modeling of AGS and Recrystallized Fraction of Microalloyed Medium Carbon Steel During Hot Deformation, Mater. Sci. Eng. A, 2003, 355, p 384-393
-
(2003)
Mater. Sci. Eng. A
, vol.355
, pp. 384-393
-
-
Kim, S.I.1
Lee, Y.2
Lee, D.L.3
Yoo, Y.C.4
|