Influence of plasma pre-treatment of polytetrafluoroethylene (PTFE) micropowders on the mechanical and tribological performance of Polyethersulfone (PESU)-PTFE composites

Wear

Volumn 328-329, Issue , 2015, Pages 480-487

  Hunke, Harald ^a   Soin, Navneet ^a   Shah, Tahir ^a   Kramer, Erich ^b   Witan, Kurt ^c   Siores, Elias ^a  

^a UNIVERSITY OF BOLTON   (United Kingdom)

^b UNIVERSITY OF APPLIED SCIENCES AND ARTS NORTHWESTERN SWITZERLAND   (Switzerland)

^c DARMSTADT UNIVERSITY OF APPLIED SCIENCES   (Germany)

Author keywords

Plasma treatment; Polyethersulfone (PESU); Polymers; Polytetrafluoroethylene (PTFE); Solid lubricants; Wear

Indexed keywords

ATOMS; FLUORINE; GLASS TRANSITION; MECHANICAL PROPERTIES; MICROWAVES; PLASMA APPLICATIONS; POLYMERS; POWDERS; SOLID LUBRICANTS; TRIBOLOGY; WEAR OF MATERIALS; X RAY PHOTOELECTRON SPECTROSCOPY;

ABSORPTION CAPABILITY; HIGH PERFORMANCE POLYMER; PLASMA PRE-TREATMENT; PLASMA TREATMENT; POLYETHERSULFONES; POLYTETRAFLUOROETHYLENE (PTFE); SURFACE FUNCTIONALISATION; TRIBOLOGICAL PERFORMANCE;

POLYTETRAFLUOROETHYLENES;

EID: 84927665317     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2015.03.004     Document Type: Article

References (39)

1. Duan Y., Cong P., Liu X., Li T. Comparative study of tribological properties of polyphenylene Sulfide (PPS), polyethersulfone (PES), and polysulfone (PSU). J. Macromol. Sci. Part B 2009, 48(2):269-281.
2. Künkel R. Auswahl Und Optimierung Von Kunststoffen Für Tribologisch Beanspruchte Systeme 2005, University, Lehrstuhl für Kunststofftechnik, Erlangen.
3. Atkins A.G., Omar M.K., Lancaster J.K. Wear of polymers. J. Mater. Sci. Lett. 1984, 3(9):779-782.
4. Duan Y., Cong P., Liu X., Li T. Comparative study of tribological properties of polyphenylene Sulfide (PPS), polyethersulfone (PES), and polysulfone (PSU). J. Macromol. Sci. Part B 2009, 48(2):269-281.
5. Duan Y., Cong P., Liu X., Li T. Friction and wear of polyphenylene sulfide (PPS), polyethersulfone (PES) and polysulfone (PSU) under different cooling conditions. J. Macromol. Sci. Part B 2009, 48(3):604-616.
6. Bijwe J., Rajesh J., Jeyakumar A., Ghosh A., Tewari U. Influence of solid lubricants and fibre reinforcement on wear behaviour of polyethersulphone. Tribol. Int. 2000, 33(10):697-706.
7. Aurilia M., Sorrentino L., Sanguigno L., Iannace S. Nanofilled polyethersulfone as matrix for continuous glass fibers composites: mechanical properties and solvent resistance. Adv. Polym. Technol. 2010, 29(3):146-160.
8. Bijwe J., Awtade S., Satapathy B.K., Ghosh A. Influence of concentration of aramid fabric on abrasive wear performance of polyethersulfone composites. Tribol. Lett. 2004, 17(2):187-194.
9. Bijwe J., Sharma M. Nano and micro PTFE for surface lubrication of carbon fabric reinforced polyethersulphone composites. Tribology of Nanocomposites 2013, 19-3. Springer, Berlin, Heidelberg.
10. Basavaraj E., Ramaraj B., Siddaramaiah Investigations Q6 on the influence of polytetrafluoroethylene powder as a filler on physico-mechanical and wear characteristics of nylon 66/graphite composites. High Perform. Polym. 2012, 24(7):616-624.
11. S. Ebnesajjad, R.A. Morgan, Fluorinated Additives for Plastics, (2012) 107-48. Elsevier Oxford.
12. Li J. The Impact and tribological properties of PTFE composites filled with PA6. J. Thermoplast. Compos. Mater. 2010, 23(6):807-816.
13. Friedrich K., Zhang Z., Schlarba A. Effects of various fillers on the sliding wear of polymer composites. Compos. Sci. Technol. 2005, 65(15-16):2329-2343.
14. Franke R., Lehmann D., Kunze K. Tribological behaviour of new chemically bonded PTFE polyamide compounds. Wear 2007, 262(3-4):242-252.
15. Inagaki N., Tasaka S., Narushima K., Teranishi K.J. Surface modification of poly (tetrafluoroethylene) with pulsed hydrogen plasma. Appl. Polym. Sci. 2002, 83(2):340-348.
16. Shojaei A., Gholamalipour S. Effect of chemical treatment of Teflon powder on the properties of polyamide 66/Teflon composites prepared by melt mixing. Macromol. Res. 2011, 19(6):613-621.
17. Aderikha V.N., Shapovalov V.A. Mechanical and tribological behavior of PTFE-polyoxadiazole fiber composites effect of filler treatment. Wear 2011, 271(5-6):970-976.
18. Khan M.S., Franke R., Gohs U., Lehmann D., Heinrich G. Friction and wear behaviour of electron beam modified PTFE filled EPDM compounds. Wear 2009, 266(1-2):175-183.
19. Klüpfel B., Lehmann D. Functionalization of irradiated PTFE micropowder with methacryl- or hydroxy groups for chemical coupling of PTFE with different matrix polymers. J. Appl. Polym. Sci. 2006, 101(5):2819-2824.
20. Diener electronic GmbH+Co. KG. Plasma technology. [May 25, 2013]; Available from: . http://www.plasmasurfacetechnology.eu/media/Plasmatechnik_en_web.pdf.
21. Vandencasteele N., Reniers F. Surface characterization of plasma-treated PTFE surfaces: an OES, XPS and contact angle study. Surf. Interface Anal. 2004, 36(8):1027-1031.
22. Caro J.C., Lappan U., Lunkwitz K. Insertion of sulfur-containing functional groups into polytetrafluoroethylene (PTFE) by low pressure plasma treatment. Surf. Coat. Technol. 1999, 116-119:792-795.
23. Dufour T., Hubert J., Viville P., Duluard C.Y., Desbief S., Lazzaroni R., Reniers F. PTFE surface etching in the post-discharge of a scanning RF plasma torch: evidence of Ejected fluorinated species. Plasma Process. Polym. 2012, 9(8):820-829.
24. Jie-Rong C., Wakida T. Studies on the surface free energy and surface structure of PTFE film treated with low temperature plasma. J. Appl. Polym. Sci. 1997, 63(13):1733-1739.
25. Liu C., Wu J., Ren L., Tong J., Li J., Cui N., Brown N., Meenan B. Comparative study on the effect of RF and DBD plasma treatment on PTFE surface modification. Mater. Chem. Phys. 2004, 85(2-3):340-346.
26. Wilson D.J., Williams R.L., Pond R.C. Plasma modification of PTFE surfaces. Part II: plasma-treated surfaces following storage in air or PBS. Surf. Interface Anal. 2001, 31(5):397-408.
27. Wilson D.J., Williams R.L., Pond R.C. Plasma modification of PTFE surfaces. Part I: surfaces immediately following plasma treatment. Surf. Interface Anal. 2001, 31(5):385-396.
28. Soever A., Hopf M., Frormann L. Effects of lubrication in high speed falling dart testing of elastomer materials. Polymer Testing 2011, 30(7):703-708.
29. Liu T.M., Baker W.E. Instrumented dart impact evaluation of linear low density polyethylene at controlled impact energy. Polym. Eng. Sci. 1991, 31(10):753-763.
30. Beamson G., Briggs D. High Resolution Xps of Organic Polymers: the Scienta Esca300 Database 1992, Wiley, Chichester [England], New York.
31. Badey J.P., Espuche E., Sage D., Chabert B., Jugnet Y., Batier C., Duc T.M. A comparative study of the effects of ammonia and hydrogen plasma downstream treatment on the surface modification of polytetrafluoroethylene. Polymer 1996, 37(8):1377-1386.
32. Badey J.P., Urbaczewski-Espuche E., Jugnet Y., Sage D., Duc T.M., Chabert B. Surface modification of polytetrafluoroethylene by microwave plasma downstream treatment. Polymer 1994, 35(12):2472-2479.
33. Pukanszky B., Fekete E. Adhes. Surf. Modif. 1999, 139:109-153.
34. Kalacska G. An engineering approach to dry friction behaviour of numerous engineering plastics with respect to the mechanical properties. Express Polym. Lett. 2012, 7(2):199-210.
35. Friction and Wear of Polymer Composites 1986, Elsevier Science Publishers B.V., Amsterdam, The Netherlands. K. Friedrich (Ed.).
36. Tanaka K., Yamada Y., Ueda S. Effect of temperature on the friction and wear of heat-resistant polymer-based composites. J. Synth. Lubr. 1992, 8(4):281-294.
37. Sinha S.K. Polymer Tribology 2009, Imperial College Press, London.
38. Bahadur S. The development of transfer layers and their role in polymer tribology. Wear 2000, 245(1-2):92-99.
39. Hüttinger K.J., Krekel G., Zielke U. Evidence for chemical bond formation between surface treated carbon fibres and high temperature thermoplastics. J. Appl. Polym. Sci. 1994, 51(4):737-742.