Intra-Vehicle Networks: A Review

IEEE Transactions on Intelligent Transportation Systems

Volumn 16, Issue 2, 2015, Pages 534-545

  Tuohy, Shane ^a   Glavin, Martin ^a   Hughes, Ciarán ^b   Jones, Edward ^a   Trivedi, Mohan ^c   Kilmartin, Liam ^a  

^a NATIONAL UNIVERSITY OF IRELAND   (Ireland)

^b VALEO   (France)

^c UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

802.3; Audio video bridging (AVB); automotive Ethernet; controller area network (CAN); driver assist; in vehicle networking; low voltage differential signaling (LVDS); media oriented systems transport (MOST); time triggered Ethernet (TTEthernet)

Indexed keywords

AUDIO SYSTEMS; AUTOMOBILE DRIVERS; CONTROL SYSTEM SYNTHESIS; ELECTRIC MACHINE CONTROL; ETHERNET; VEHICLES;

802.3; AUDIO VIDEOS; CONTROLLER AREA NETWORK; DRIVER ASSISTS; IN-VEHICLE NETWORKING; LOW VOLTAGE DIFFERENTIAL SIGNALING; MEDIA ORIENTED SYSTEMS TRANSPORTS; TIME TRIGGERED ETHERNET;

VEHICLE TO VEHICLE COMMUNICATIONS;

EID: 84927132416     PISSN: 15249050     EISSN: None     Source Type: Journal    
DOI: 10.1109/TITS.2014.2320605     Document Type: Review

References (91)

1. H. J. Song, H. P. Hsu, R. Wiese, and T. Talty, "Modeling signal strength range of TPMS in automobiles," in Proc. IEEE Antennas Propag. Soc. Int. Symp., 2004, vol. 3, pp. 3167-3170.
2. W. Niu, J. Li, and T. Talty, "Intra-vehicle UWB channel measurements and statistical analysis," in Proc. IEEE GLOBECOM, 2008, pp. 1-5.
3. T. ElBatt, C. Saraydar, M. Ames, and T. Talty, "Potential for intra-vehicle wireless automotive sensor networks," in Proc. IEEE Sarnoff Symp., 2006, pp. 1-4.
4. I. Rouf, "Security and privacy vulnerabilities of in-car wireless networks: A tire pressure monitoring system case study," in Proc. USENIX Security Symp., 2010, pp. 323-338.
5. CAN Specification, Robert Bosch GmbH, Stuttgart, Germany, 1991.
6. R. Makowitz and C. Temple, "FlexRay - A communication network for automotive control systems," in Proc. IEEE Int. Workshop Factory Commun. Syst., 2006, pp. 207-212.
7. OPEN Alliance SIG, OPEN Alliance: About, 2012.
8. AVnu Alliance, No Title, 2012. [Online]. Available: http://www.avnu.org/
9. JasPar, JasPar, 2013. [Online]. Available: https://www.jaspar.jp/english/index-e.php
10. S. Tuohy, M. Glavin, E. Jones, M. Trivedi, and L. Kilmartin, "Next generation wired intra-vehicle networks, a review," in Proc. IEEE Intell. Veh. Symp., 2013, pp. 777-782.
11. LIN Specification Package, Revision 2.0, LIN Consortium, 2003.
12. MOST Specification Revision 2.3, MOST Cooperation, Karlsruhe, Germany, 2008.
13. S. Huq and J. Goldie, "An overview of LVDS technology," Nat. Semicond. Appl. Note, vol. 971, pp. 1-6, 1998.
14. D. Anderson, FireWire System Architecture: IEEE 1394a. Reading, MA, USA: Addison-Wesley, 1999.
15. N. Navet and F. Simonot-Lion, "In-vehicle communication networks-a historical perspective and review," in Industrial Communication Technology Handbook, 2nd ed, vol. 96. Boca Raton, FL, USA: CRC Press, 2013, pp. 1204-1223.
16. N. Navet and F. Simonot-Lion, A Review of Embedded Automotive Protocols. Boca Raton, FL, USA: CRC Press, 2008, pp. 1-42.
17. N. Navet, Y. Song, F. Simonot-Lion, and C. Wilwert, "Trends in automotive communication systems," Proc. IEEE, vol. 93, no. 6, pp. 1204-1223, Jun. 2005.
18. T. Nolte, H. Hansson, and L. Bello, "Automotive communications - Past, current and future," in Proc. 10th IEEE Conf. ETFA, 2005, vol. 1, p. 992.
19. D. Paret and R. Riesco, Multiplexed Networks for Embedded Systems. Hoboken, NJ, USA: Wiley, 2007.
20. G. Karagiannis et al., "Vehicular networking: A survey and tutorial on requirements, architectures, challenges, standards and solutions," IEEE Commun. Surveys Tuts., vol. 13, no. 4, pp. 584-616, Fourth Quarter, 2011.
21. M. Gerla and L. Kleinrock, "Vehicular networks and the future of the mobile Internet," Comput. Netw., vol. 55, no. 2, pp. 457-469, Feb. 2011.
22. H. Kopetz and G. Grunsteidl, "TTP - A time-triggered protocol for fault-tolerant real-time systems," in Proc. 23rd Int. Symp. FTCS, Dig. Papers, 1993, pp. 524-533.
23. G. Leen and D. Heffernan, "TTCAN: A new time-triggered controller area network," Microprocess. Microsyst., vol. 26, no. 2, pp. 77-94, Mar. 2002.
24. H. Kopetz, "A Comparison of TTP/C and FlexRay," Institut fur Technische Informatik, Technische Universitat Wien, Wien, Austria, Res. Rep., pp. 1-22, 2001, vol. 10.
25. M. Ruff, "Evolution of local interconnect network (LIN) solutions," in Proc. IEEE 58th VTC-Fall, 2003, vol. 5, pp. 3382-3389.
26. M. Rabel, "Integrating IEEE 1394 as infotainment backbone into the automotive environment," in Proc. IEEE VTS 53rd VTC 2001 Spring, 2001, vol. 3, pp. 2026-2031.
27. T. Nolte, "Share-driven scheduling of embedded networks," Ph.D. dissertation, Mälardalen Univ., Västerås, Sweden, 2006.
28. M. Rahmani, J. Hillebrand, W. Hintermaier, R. Bogenberger, and E. Steinbach, "A novel network architecture for in-vehicle audio and video communication," in Proc. 2nd IEEE/IFIP Int. Workshop BcN, 2007, pp. 1-12.
29. D. O. Cualain, C. Hughes, M. Glavin, and E. Jones, "Automotive standards-grade lane departure warning system," IET Intell. Transp. Syst., vol. 6, no. 1, pp. 44-57, Mar. 2012.
30. R. M. Metcalfe and D. R. Boggs, "Ethernet: Distributed packet switching for local computer networks," Commun. ACM, vol. 19, no. 7, pp. 395-404, Jul. 1976.
31. T. Thomsen and G. Drenkhan, "Ethernet for AUTOSAR," EB Automotive Gmbh, Erlangen, Germany, 2008.
32. A. Doshi, B. T. Morris, and M. M. Trivedi, "On-road prediction of driver's intent with multimodal sensory cues," IEEE Pervasive Comput., vol. 10, no. 3, pp. 22-34, Jul./Sep. 2011.
33. B. Morris and M. Trivedi, "Vehicle iconic surround observer: Visualization platform for intelligent driver support applications," in Proc. IEEE IV Symp., 2010, pp. 168-173.
34. M. Schneider, "Automotive radar - Status and trends," in German Microw. Conf., 2005, pp. 3-6.
35. R. O'Malley, M. Glavin, and E. Jones, "An efficient region of interest generation technique for far-infrared pedestrian detection," in Proc. ICCE, Dig. Tech. Papers, 2008, pp. 1-2.
36. S. Tuohy, D. O'Cualain, E. Jones, and M. Glavin, "Distance determination for an automobile environment using inverse perspective mapping in OpenCV," in IET Irish Signals Syst. Conf., 2010, pp. 100-105.
37. R. Bruckmeier, "Ethernet for automotive applications," in Freescale Technol. Forum, 2010. [Online]. Available: https://www.yumpu.com/en/document/view/21046604/ethernet-for-automotive-applications-freescale
38. P. Hank, T. Suermann, and S. Müller, "Automotive Ethernet, a holistic approach for a next generation in-vehicle networking standard," in Advanced Microsystems for Automotive Applications. Berlin, Germany: Springer-Verlag, 2012, pp. 79-89.
39. S. Carlson, Reduced Twisted Pair Gigabit Ethernet (RTPGE) Group, 2012. [Online]. Available: http://www.ieee802.org/3/RTPGE/
40. M. Strobl et al., "Using Ethernet over powerline communication in automotive networks," in Proc. 10th Workshop WISES, 2012, pp. 39-44.
41. W. Gouret, F. Nouvel, and G. El-Zein, "High data rate network using automotive powerline communication," in Proc. 7th Int. Conf. ITS Telecommun., Jun. 2007, pp. 1-4.
42. F. Nouvel and P. Maziéro, "X-by-wire and intra-car communications: Power line and/or wireless solutions," in Proc. ITST, 2008, pp. 443-448.
43. P. Tanguy, F. Nouvel, and P. Maziearo, "Power line communication standards for in-vehicule networks," in Proc. Intell. Transp. Syst. Telecommun., 2009, pp. 533-537.
44. F. Nouvel and P. Tanguy, "What is about future high speed power line communication systems for in-vehicles networks?" in Proc. 7th Int. Conf. Inf., Commun. Signal Process., 2009, pp. 1-6.
45. W. Gouret, F. Nouvel, and G. El-Zein, "Powerline communication on automotive network," in Proc. IEEE 65th VTC-Spring, Apr. 2007, pp. 2545-2549.
46. H.-T. Lim, B. Krebs, L. Volker, and P. Zahrer, "Performance evaluation of the inter-domain communication in a switched Ethernet based in-car network," in Proc. IEEE 36th Conf. Local Comput. Netw., Oct. 2011, pp. 101-108.
47. H.-T. Lim, D. Herrscher, and F. Chaari, "Performance comparison of IEEE 802.1Q and IEEE 802.1 AVB in an ethernet-based in-vehicle network," in Proc. 8th ICCM, 2012, pp. 1-6.
48. M. Rahmani et al., "Traffic shaping for resource-efficient in-vehicle communication," IEEE Trans. Ind. Informat., vol. 5, no. 4, pp. 414-428, Nov. 2009.
49. M. Rahmani, E. Steinbach, W. Hintermaier, A. Laika, and H. Endt, "A novel network design for future IP-based driver assistance camera," in Proc. IEEE Int. Conf. Netw., Sensing Control, Mar. 2009, vol. 1, pp. 457-462.
50. M. Rahmani and R. Steffen, "Performance analysis of different network topologies for in-vehicle audio and video communication," Proc. 4th IT-NEWS, pp. 179-184, Feb. 2008.
51. Y. Lee and K. Park, "Meeting the real-time constraints with standard Ethernet in an in-vehicle network," in Proc. IEEE IV Sypm., 2013, pp. 1313-1318.
52. H. Zinner, J. Noebauer, T. Gallner, and J. Seitz, "Application and realization of gateways between conventional automotive and IP/ethernet-based networks," in Proc. 48th ACM/EDAC/IEEE DAC, 2011, pp. 1-6.
53. J. Imtiaz, J. Jasperneite, and L. Han, "A performance study of Ethernet Audio Video Bridging (AVB) for industrial real-time communication," in Proc. IEEE Conf. ETFA, 2009, pp. 1-8.
54. J. Imtiaz, J. Jasperneite, and K. Weber, "Approaches to reduce the latency for high priority traffic in IEEE 802.1 AVB networks," in Proc. 9th IEEE Int. WFCS, 2012, pp. 161-164.
55. E. Heidinger, F. Geyer, S. Schneele, and M. Paulitsch, "A performance study of audio video bridging in aeronautic Ethernet networks," in Proc. 7th IEEE Int. SIES, Jun. 2012, pp. 67-75.
56. H. Lim, D. Herrscher, and L. Volker, "IEEE 802.1 AS time synchronization in a switched Ethernet based in-car network," in Proc. IEEE VNC, 2011, pp. 147-154.
57. H. Lim, D. Herrscher, M. Waltl, and F. Chaari, "Performance analysis of the IEEE 802.1 ethernet audio/video bridging standard," in Proc. 5th SIMUTOOLS, 2012, pp. 27-36.
58. G. Alderisi, G. Iannizzotto, and L. L. Bello, "Towards IEEE 802.1 Ethernet AVB for advanced driver assistance systems: A preliminary assessment," in Proc. IEEE 17th Conf. ETFA, vol. 3, pp. 88-91.
59. H. Lim and K. Weckemann, "Performance study of an in-car switched ethernet network without prioritization," in Proc. 3rd Int. Conf. Commun. Technol. Veh., 2011, pp. 165-175.
60. A. Kern, H. Zinner, T. Strichert, J. Nobauer, and J. Teich, "Accuracy of ethernet AVB time synchronization under varying temperature conditions for automotive networks," in Proc. 48th ACM/EDAC/IEEE DAC, 2011, pp. 597-602.
61. J. Diemer and J. Rox, "Modeling of Ethernet AVB networks for worst-case timing analysis," in Proc. MATHMOD, 2012, pp. 848-853.
62. R. Queck, "Analysis of Ethernet AVB for automotive networks using network calculus," in Proc. IEEE ICVES, Jul. 2012, pp. 61-67.
63. J. Y. Le Boudec and P. Thiran, Network Calculus: A Theory of Deterministic Queuing Systems for the Internet, vol. 2050. Berlin, Germany: Springer-Verlag, 2001.
64. H. Lim and L. Volker, "Challenges in a future IP/Ethernet-based in-car network for real-time applications," in Proc. DAC, 2011, pp. 7-12.
65. T. Steinbach, F. Korf, and T. C. Schmidt, "Real-time Ethernet for automotive applications: A solution for future in-car networks," in Proc. IEEE ICCE-Berlin, Sep. 2011, pp. 216-220.
66. T. Steinbach et al., "Tomorrows in-car interconnect? A competitive evaluation of IEEE 802.1 AVB and time-triggered Ethernet," in Proc. 76th IEEE VTC-Fall, 2012, pp. 1-5.
67. G. Alderisi et al., "Simulative assessments of IEEE 802.1 Ethernet AVB and time-triggered ethernet for advanced driver assistance systems and in-car infotainment," in Proc. IEEE VNC, 2012, pp. 187-194.
68. S. Tuohy, M. Glavin, C. Hughes, E. Jones, and L. Kilmartin, "An ns-3 based simulation testbed for in-vehicle communication networks," presented at the 27th Annual UK Performance Engineering Workshop, Bradford, U.K., 2011.
69. F. Bartols, T. Steinbach, F. Korf, and T. C. Schmidt, "Performance analysis of time-triggered ether-networks using off-the-shelf-components," in Proc. 14th IEEE Int. Symp. Obj./Compon./Serv.-Oriented Real-Time Distrib. Comput. Workshops, Mar. 2011, pp. 49-56.
70. R. Steffen, R. Bogenberger, J. Hillebrand, W. Hintermaier, and A. Winckler, "Design and realization of an IP-based in-car network architecture," in Proc. ISVCS, 2008, pp. 1-7.
71. K. Muller, T. Steinbach, F. Korf, and T. C. Schmidt, "A real-time Ethernet prototype platform for automotive applications," in Proc. IEEE ICCE-Berlin, Sep. 2011, pp. 221-225.
72. W. Steiner, "TTEthernet specification," TTTech Computertechnik AG, Wien, Austria, Nov. 2008.
73. H. Kopetz, A. Ademaj, P. Grillinger, and K. Steinhammer, "The Time-Triggered Ethernet (TTE) design," in Proc. 8th IEEE ISORC, 2005, pp. 22-33.
74. A. Ademaj and H. Kopetz, "Time-triggered Ethernet and IEEE 1588 clock synchronization," in Proc. IEEE Int. Symp. Precision Clock Synchronization Meas., Control Commun., Oct. 2007, pp. 41-43.
75. H. Kopetz, "The rationale for time-triggered Ethernet," in Proc. IEEE Real-Time Syst. Symp., Nov. 2008, pp. 3-11.
76. TTEthernet Standard, SAE AS 6802, Nov. 2011.
77. T. Steinbach, F. Korf, and T. C. Schmidt, "Comparing time-triggered Ethernet with FlexRay: An evaluation of competing approaches to real-time for in-vehicle networks," in Proc. IEEE Int. Workshop Factory Commun. Syst. Proc., May 2010, pp. 199-202.
78. T. Steinbach and H. Kenfack, "An extension of the OMNeT++ INET framework for simulating real-time Ethernet with high accuracy," in Proc. OMNeT++, 2011, pp. 1-8.
79. L. C. Wolf, C. Griwodz, R. Steinmetz, and S. Member, "Multimedia communication," Proc. IEEE, vol. 85, no. 12, Dec. 1997.
80. M. Rahmani, "A resource-efficient IP-based network architecture for in-vehicle communication," Ph.D. dissertation, Tech. Univ. Munchen, Munich, Germany, 2009.
81. AUTOSAR, Technical Overview v. 2.2.2.
82. W. Dafang, L. Shiqiang, H. Bo, Z. Guifan, and Z. Jiuyang, "Communication mechanisms on the virtual functional bus of AUTOSAR," in Proc. Int. Conf. Intell. Comput. Technol. Autom., May 2010, pp. 982-985.
83. H. Bo, D. Hui, W. Dafang, and Z. Guifan, "Basic concepts on AUTOSAR development," in Proc. Int. Conf. Intell. Comput. Technol. Autom., May 2010, pp. 871-873.
84. D. Kum, G.-M. Park, S. Lee, and W. Jung, "AUTOSAR migration from existing automotive software," in Proc. International Conf. Control, Autom. Syst., Oct. 2008, pp. 558-562.
85. T. Hermans, P. Ramaekers, J. Denil, P. D. Meulenaere, and J. Anthonis, "Incorporation of AUTOSAR in an embedded systems development process: A case study," in Proc. 37th EUROMICRO Conf. Softw. Eng. Adv. Appl., Aug. 2011, pp. 247-250.
86. M. Mews, J. Svacina, and S. Weißleder, "From AUTOSAR models to co-simulation for MiL-testing in the automotive domain," in Proc. IEEE 5th Int. Conf. Softw. Test., Verification Validation, Apr. 2012, pp. 519-528.
87. M. Kumar, J. Yoo, and S. Hong, "Enhancing AUTOSAR methodology to a COTS-based development process via mapping to V-model," in Proc. IEEE SIES, 2009, pp. 50-53.
88. T. Piper, S. Winter, P. Manns, and N. Suri, "Instrumenting AUTOSAR for dependability assessment: A guidance framework," in Proc. IEEE/IFIP Int. Conf. DSN, Jun. 2012, pp. 1-12.
89. H. Moon et al., "Automation test method for automotive embedded software based on AUTOSAR," in Proc. 4rth Int. Conf. Softw. Eng. Adv., Sep. 2009, pp. 158-162.
90. K. Lakshmanan, "Integrated end-to-end timing analysis of networked AUTOSAR-compliant systems," in Proc. DATE, 2010, pp. 331-334.
91. S. Anssi, S. Tucci-Piergiovanni, S. Kuntz, S. Gerard, and F. Terrier, "Enabling scheduling analysis for AUTOSAR systems," in Proc. 14th IEEE Int. Symp. Object/Compon./Serv.-Oriented Real-Time Distrib. Comput., Mar. 2011, pp. 152-159.