Modifying cellulose fibers by adsorption/precipitation of xylan

Cellulose

Volumn 22, Issue 1, 2015, Pages 189-201

  Miletzky, Albrecht ^a   Punz, Manuel ^b   Zankel, Armin ^a   Schlader, Sandra ^c   Czibula, Caterina ^a,d   Ganser, Christian ^a,d   Teichert, Christian ^a,d   Spirk, Stefan ^a,e   Zöhrer, Siegfried ^a   Bauer, Wolfgang ^a   Schennach, Robert ^a  

^a GRAZ UNIVERSITY OF TECHNOLOGY   (Austria)

^b LENZING AG   (Austria)

^c KOMPETENZZENTRUM HOLZ GMBH   (Austria)

^d UNIVERSITY OF LEOBEN   (Austria)

^e GRAZ UNIVERSITY OF TECHNOLOGY   (Austria)

Author keywords

AFM with functionalized tips; ATR spectroscopy; SEM (conventional and low voltage mode); Strength properties; Xylan adsorption; Xylan distribution

Indexed keywords

ATOMIC FORCE MICROSCOPY; BLEACHING; CELLULOSE; CELLULOSE FILMS; CLEANING; KRAFT PULP; PULP BEATING; PULP REFINING; SULFITE PULP; UNBLEACHED PULP;

ATR SPECTROSCOPY; FUNCTIONALIZED; LOW VOLTAGES; STRENGTH PROPERTY; XYLAN DISTRIBUTION;

ADSORPTION;

EID: 84925533231     PISSN: 09690239     EISSN: 1572882X     Source Type: Journal    
DOI: 10.1007/s10570-014-0472-3     Document Type: Article

References (59)

1. Alén R (ed) (2007) Papermaking science and technology. Papermaking chemistry. Number 4. Finnish Paper Engineers’ Association/Paperi ja Puu Oy, 2 edition
2. Antal M, Ebringerová A, Hromádková Z (1997) Struktur und papiertechnische Eigenschaften von Aminoalkylxylanen. Papier 51(5):223–226
3. Antal M, Ebringerová A, Micko MM (1991) Kationisierte Hemicellulosen aus Espenholzmehl und ihr Einsatz in der Papierherstellung. Papier 45(5):232–235
4. Aurell R (1963) The effect of lowered pH at the end of birch kraft cooks. Sven Papperstidn 66(11):437–442
5. Bachner K, Fischer K, Bäucker E (1993) Zusammenhang zwischen aufbau der zellwand und festigkeitseigenschaften bei faserstoffen von konventionellen und neuen aufschlussverfahren. Paper 10A:V30–V40
6. Cao BG, Tschirner U, Ramaswamy S (1998) Impact of pulp chemical composition on recycling. Tappi J 81(12):119–127
7. Christiernin M, Henriksson G, Lindström ME, Brumer H, Teeri TT, Lindström T, Laine J (2003) The effects of xyloglucan on the properties of paper made from bleached kraft pulp. Nord Pulp Paper Res 18(2):182–187
8. Coleho dos Santos Muguet M, Pedrazzi C, Colodette JL (2011) Xylan deposition onto eucalyptus pulp fibers during oxygen delignification. Holzforschung 65:605–612
9. Dahlman O, Sjöberg J, Jansson UB, Larsson PO (2003) Effects of surface hardwood xylan on the quality of softwood pulps. Nord Pulp Pap Res J 18(3):310–315
10. Dobrynin AV, Rubinstein M (2005) Theory of polyelectrolytes in solutions and at surfaces. Prog Polym Sci 30:1049–1118
11. Dobrynin AV, Deshkovski AV, Rubinstein M (2001) Adsorption of polyelectrolytes at oppositely charged surfaces. Macromolecules 34:3421–3436
12. Ebringerová A, Hromádková Z, Heinze T (2005) Hemicellulose. Adv Polym Sci 186:1–67
13. Evans R, Newman RH, Roick UC, Suckling ID, Wallis AFA (1995) Changes in cellulose crystallinity during kraft pulping. Comparison of infrared, X-ray diffraction and solid state NMR results. Holzforschung 49:498–504
14. Fengel D (1992) Möglichkeiten und Grenzen der FTIR-Spektroskopie bei der Charakterisierung von Cellulose. Teil 3. Einfluss von Begleitstoffen auf der IR-Spektrum von Cellulose. Papier 1:7–11
15. Fengel D, Wegener G (2003) Wood chemistry, ultrastructure and reactions. Kessler Verlag, Munchen
16. Gilli E, Horvath AE, Horvath AT, Hirn U, Schennach R (2009) Analysis of CMC attachment onto cellulosic fibers by infrared spectroscopy. Cellulose 16:825–832
17. Heinz WF, Hoh JH (1999) Spatially resolved force spectroscopy of biological surfaces using the atomic force microscope. Trends Biol 17(4):143–150
18. Henriksson A, Gatenholm P (2001) Controlled assembly of glucuronoxylans onto cellulose fibers. Holzforschung 55(5):494–502
19. Henriksson A, Gatenholm P (2002) Surface properties of CTMP fibres modified with xylans. Cellulose 9:55–64
20. Higgins HG, Stewart CM, Harrington KJ (1961) Infrared spectra of cellulose and related polysaccharides. J Polym Sci 51:59–84
21. Horvath AE, Lindström T (2007) Indirect polyelectrolyte titration of cellulosic fibers—surface and bulk charges of cellulosic fibers. Nord Pulp Pap Res J 22(1):87–92
22. Horvath AE, Lindström T, Laine J (2006) On the indirect polyelectrolyte titration of cellulosic fibers. Conditions for charge stoichiometry and comparison with esca. Langmuir 22(2):824–830
23. Jacobs A, Dahlman O (2001) Characterization of the molar masses of hemicelluloses from wood and pulps employing size exclusion chromatography and matrix-assisted laser desorption ionization time-of-flight mass spectrometry. Biomacromolecules 2(3):894–905
24. Kačuráková M, Wellner N, Ebringerová A, Hromádková Z, Wilson RH (1999) Characterisaiton of xylan-type polysaccharides and associated cell wall components by FT-IR and FT-Raman spectroscopies. Food Hydrocoll 13:35–41
25. Katz S, Beatson RP, Scallan AM (1984) The determination of strong and weak acidic groups in sulfite pulps. Sven Papperstidn 87(6):R48–R53
26. Köhnke T, Gatenholm P (2007) The effect of controlled glucuronoxylan adsorption on drying-induced strength loss of bleached softwood pup. Nord Pulp Paper Res 22(4):508–514
27. Köhnke T, Pujolras C, Roubroeks JP, Gatenholm P (2008) The effect of barley husk arabinoxylan adsorption on the properties of cellulose fibres. Cellulose 15:537–546
28. Kontturi E, Thüne PC, Niemantsverdriet JW (2003) Novel method for preparing cellulose model surfaces by spin coating. Polymer 44(13):3621–3625
29. Laine J, Stenius P (1997) Effect of charge on the fibre and paper properties of bleached industrial kraft pulps. Pap Puu-Pap Tim 79(4):257–266
30. Lawoko M, Berggren R, Berthold F, Henriksson G, Gellerstedt G (2004) Changes in the lignin-carbohydrate complex in softwood kraft pulp during kraft and oxygen delignification. Holzforschung 58(6):603–610
31. Lawoko M, Henriksson G, Gellerstedt G (2006) Characterisation of lignin-carbohydrate complexes (lccs) of spruce wood (Picea abies L.) isolated with two methods. Holzforschung 60:156–161
32. Leopold B, McIntosh DC (1961) Chemical composition and physical properties of wood fibers. III. Tensile strength of individual fibers from alkali extracted loblolly pine holocellulose. Tappi J 44(3):235–240
33. Lin SY (1992) Methods in lignin chemistry. Springer series in wood science. Springer, Berlin
34. Linder A, Bergman R, Bodin A, Gatenholm P (2003) Mechanism of assembly of xylan onto cellulose surfaces. Langmuir 19(12):5072–5077
35. McIntosh DC (1963) Tensile and bonding strengths of loblolly pine kraft fibers cooked to different yields. Tappi J 46(5):273–277
36. Miletzky A, Punz M, Weber H, Wollboldt P, Krasser R, Bauer W, Schennach R (2013) Improvement of paper strength by increasing the xylan content. In: Advances in pulp and paper research, Cambridge 2013, Trans. XVth Fund. Res. Symp. Cambridge, 2013 (S.J. I’Anson, ed.), pp 887–906
37. Mittika-Eklund M (1996) Sorption of xylans on cellulose fibres, Licentitate thesis. Department of Forest Porducts Technology, Helsinki University of Technology
38. Mohan T, Spirk S, Kargl R, Doliska A, Vessel A, Salzmann I, Ressel R, Ribitsch V, Stana-Kleinschek K (2012) Exploring the rearrangement of amorphous cellulose model thin films upon heat treatment. Soft Matter 8:807–9815
39. Moss PA, Pere J (2006) Microscopical study on the effects of partial removal of xylan on the swelling properties of birch kraft pulp fibres. Nord Pulp Paper Res 21(1):8–12
40. Persson BNJ, Ganser C, Schmied F, Teichert C, Schennach R, Gilli E, Hirn U (2013) Adhesion of cellulose fibers in paper. J Phys 25(4):1–11
41. Pettersson SE, Rydholm SA (1961) Hemicelluloses and paper properties of pirch pulps. Part 3. Svensk Papperstidn 64(1):4–17
42. Ratcliff FT (1949) The possible correlation between hemicelluloses and the physical properties of bleached kraft pulps. Tappi J 32(8):357–367
43. Rauvanto I, Pere J, Henricson K (2006) Fibre damage in unbleached reinforcement pulp—the effect of hemicelluloses and lignin on the susceptibility of fibres to damage during oxygen delignification. Nord Pulp Paper Res 21(3):328–335
44. Ren J-L, Peng F, Sun R-C, Kennedy JF (2009) Influence of hemicellulosic derivates on the sulfate kraft pulp strength. Carbohydr Polym 75(2):338–342
45. Rohm S, Hirn U, Ganser C, Teichert C, Schennach R (2014) Thin cellulose films as a model system for paper fibre bonds. Cellulose 21(1):237–249
46. Schmied FJ, Teichert C, Kappel L, Hirn U, Schennach R (2012) Analysis of precipitated lignin on kraft pulp fibers using atomic force microscopy. Cellulose 19(3):1013–1021
47. Schönberg C, Oksanen T, Suurnäkki A, Kettunen H, Buchert J (2001) The importance of xylan for the strength properties of spruce kraft pulp fibres. Holzforschung 55(6):639–644
48. Schwikal K, Heinze T, Saake B, Puls J, Kaya A, Esker AR (2011) Properties of spruce sulfite pulp and birch kraft pulp after sorption of cationic birch xylan. Cellulose 18:727–737
49. Shigematsu M, Morita M, Higuchi M, Sakata I (1994) Interfacial bond strength between woody polymers. Mokuzai Gakkaishi 40(7):718–724
50. Silva TCF, Colodette JL, Lucia LA, de Oliveira RC, Oliveira FN, Silva LHM (2011) Adsorption of chemically modified xylans on eucalyptus pulp and its effect on the pulp physical properties. Ind Eng Chem Res 50:1138–1145
51. Sixta H (2006) Handbook of pulp, vol 1. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
52. Sixta H, Schelosky N, Milacher W, Baldinger T, Röder T (2001) Characterization of alkalisoluble pulp fractions by chromatography. In: Proceedings 11th international symposium on wood and pulping chemistry. Nice, France, pp 655–658
53. Sjöberg J, Kleen M, Dahlman O, Agnemo R, Sundvall H (2004) Fiber surface composition and its relations to papermaking properties of soda-anthraquinone and kraft pulps. Nord Pulp Pap Res J 19(3):392–396
54. Spiegelberg HL (1966) The effect of hemicelluloses on the mechanical properties of individual pulp fibers. Tappi J 49(9):388–396
55. Stone JE, Scallan AM (1968) The effect of component removal upon the porous structure of the cell wall of wood. Part III. A comparison between the sulphite and kraft processes. Pulp Pap Mag Can 69(6):T288–T293
56. Terayama H (1952) Method of colloid titration (a new titration between polymer ions). J Polym Sci 8(2):243–253
57. Weber F, Koller G, Schennach R, Bernt I, Eckhart R (2013) The surface charge of regenerated cellulose fibres. Cellulose 20:2719–2729
58. Westbye P, Svanberg C, Gatenholm P (2006) The effect of molecular composition of xylan extracted from birch on its assembly onto bleached softwood kraft pulp. Holzforschung 60:143–148
59. Winter L, Wågberg L, Ödberg L, Lindström T (1985) Polyelectrolytes adsorbed on the surface of cellulosic materiels. J Colloid Interf Sci 111(2):537–543