Xylan deposition onto eucalypt pulp fibers during oxygen delignification

Holzforschung

Volumn 65, Issue 4, 2011, Pages 605-612

  Dos Santos Muguet, Marcelo Coelho ^a   Pedrazzi, Cristiane ^a   Colodette, Jorge Luiz ^a  

^a FEDERAL UNIVERSITY OF VIÇOSA   (Brazil)

Author keywords

eucalyptus; fiberline yield gains; hemicelluloses; kraft pulp; oxygen delignification; xylan; xylan deposition; xylan extraction

Indexed keywords

EUCALYPTUS; FIBER LINES; HEMICELLULOSES; OXYGEN DELIGNIFICATION; XYLAN; XYLAN DEPOSITION; XYLAN EXTRACTION;

BLEACHING; CLEANING; CURRICULA; DELIGNIFICATION; DEPOSITION; ENERGY UTILIZATION; INDUSTRIAL APPLICATIONS; KRAFT PROCESS; MECHANICAL PROPERTIES; OXYGEN; PAPER AND PULP MILLS; PULP BEATING;

KRAFT PULP;

BLEACHABILITY; DELIGNIFICATION; EUCALYPTUS; FIBERS; KRAFT PULPS; MECHANICAL PROPERTIES; OXYGEN; PULP MILLS; PULPS; XYLANS;

EUCALYPTUS;

EID: 79959410487     PISSN: 00183830     EISSN: 1437434X     Source Type: Journal    
DOI: 10.1515/HF.2011.070     Document Type: Conference Paper

References (38)

1. Anjos, O., Santos, A., Simões, R. (2005) Efeito do teor de hemiceluloses na qualidade do papel produzido com fibra de Eucalipto. In: 5th Congresso Florestal Nacional.
2. Annergren, G., Rydholm, S., Vardheim, S. (1962) Influence of raw material and pulping process on the chemical composition and physical properties of paper pulps. Svensk Papperstidn. 66:196-210.
3. Aurell, R. (1963) The effect of lowered pH at the end of birch kraft cooks. Svensk Papperstidn. 66:437-442.
4. Aurell, R. (1965) Increasing kraft pulp yield by redeposition of hemi-celluloses. Tappi J. 48:80-84.
5. Bachner, K., Fischer, K., Bäuker, E. (1993) Zusammenhang zwischen Aufbau der Zellwände und Festigkeitseigenschaften bei Faserstoffen von konventionellen und neuen Aufschlussverfaren. Das Papier 47:30-40.
6. Bhaduri, S.K., Ghosh, I.N., Deb Sarkar, N.L. (1995) Ramie hemi-celullose as beater additive in paper making from jute-stick kraft pulp. Ind. Crop. Prod. 4:79-84.
7. Clark, J. (1985) Pulp Technology and Treatment for Paper. San Francisco, CA: Miller Freeman. pp. 156-173.
8. Dahlman, O., Jacobs, A., Sjöberg, J. (2003a) Molecular properties of hemicelluloses located in the surface and inner layers of hardwood and softwood pulps. Cellulose 10:325-334. (Pubitemid 37529415)
9. Dahlman, O., Sjöberg, J., Jansson, U.B., Larsson, P.O. (2003b) Effects of surface hardwood xylan on the quality of softwood pulps. Nord. Pulp Pap. Res. J. 18:310-315.
10. Danielsson, S., Lindström, M.E. (2005) Influence of birch xylan adsorption during kraft cooking on softwood pulp strength. Nord. Pulp Pap. Res. J. 20:436-441. (Pubitemid 43059487)
11. Danielsson, S., Lindström, M.E. (2009) The effect of black liquor exchange in the kraft cook on the tensile properties of Eucalyptus urograndis kraft pulp. O Papel 70:35-50.
12. Eriksson, E., Sjöström, E. (1968) Influence of acidic groups on the physical properties of high-yield pulps. Tappi J. 51:56-59.
13. Hansson, J.A., Hartler, N. (1969) Sorption of hemicelluloses on cellulose fibers. I. Sorption of xylans. Svensk Papperstidn. 72:521-530.
14. Kersavage, P. (1973) Moisture content effect on tensile properties of individual Douglas-fir latewood tracheids. Wood Fiber Sci. 5:105-117.
15. Kettunen, J., Laine, J.E., Yrjälä, I., Virkola, N.-E. (1982) Aspects of strength development in fibres produced by different pulping methods. Pap. Puu 64:205-211.
16. Köhnke, T., Gatenholm, P. (2007) The effect of controlled glucouronoxylan adsorption on drying-induced strength loss of bleached softwood pulp. Nord. Pulp Pap. Res. J. 22:508-515.
17. Leopold, B., McIntosh, D.C. (1961) Chemical composition and physical properties of wood fibres. III: tensile strength of individual fibres from alkali extracted loblolly pine holocellulose. Tappi J. 44:235-240.
18. Liitiä, T., Hortling, B., Honkonen, P., Sneck, A., Joutsimo, O., Tamminen, T. (2005) Fiber morphology responsible for restricted solubility of softwood kraft pulp in LiCl/DMAc. In: International Symposium on Wood, Fiber and Pulping Chemistry, Vol. 3, pp. 371-375. (Pubitemid 43006385)
19. Linder, A., Bergman, R., Bodin, A., Gatenholm, P. (2003) Mechanism of assembly of xylan onto cellulose surfaces. Langmuir 19:5072-5077.
20. Mitikka-Eklund, M. (1996) Sorption of xylans on cellulose fibres. Licentiate thesis, University of Jyväskylä, Finland.
21. Mobarak, F., El-Ashawy, A.E., Fahmy, Y. (1973) Hemicelluloses as additives in papermaking. 2. The role of added hemicelluloses and hemicellulose in situ on paper properties. Cell. Chem. Technol. 7:325-335.
22. Molin, U., Teder, A. (2002) Importance of cellulose/hemicellulose ratio for pulp strength. Nord. PulpPap. Res. J. 17:14-19.
23. Molina, E.M.A., Mogollón, G., Colodette, J.L. (2008) Efecto de las xilanas en la refinabilidad y propiedades físico-mecánicas de pulpa kraft de eucalyptus spp. In: V Congreso Iberoamericano de Investigacion in Celulosa y Papel - CIADICYP, Guadalajara, Mexico. Universidad de Guadalajara.
24. Muguet, M.C.S., Colodette, J.L., Pedrazzi, C. (2010) Xylans deposition onto eucalyptus pulp fibers during oxygen delignification. Part 1: the influence of NaOH charge, reaction time and temperature. In: VI Congresso Iberoamericano de Investigação em Celulose e Papel - CIADICYP, Lisbon, Portugal. Tecnicelpa.
25. Österberg, M., Laine, J., Stenius, P., Kumpulainen, A., Claesson, P.M. (2001) Forces between xylan-coated surfaces: effect of polymer charge density and background electrolyte. J. Colloid. Interf. Sci. 242:59-66. (Pubitemid 32929927)
26. Pettersson, S.E., Rydholm, S.A. (1961) Hemicelluloses and paper properties of birch pulps. Sven. Paperstidn. 64:4-17.
27. Pinto, P.C., Evtuguin, C., Pascoal Neto, C. (2005) Structure of hardwood glucuronoxylans: modifications and impact on pulp retention during wood kraft pulping. Carbohydr. Polym. 60:489-497. (Pubitemid 40744090)
28. Ribe, E., Lindblad, M.S., Dahlman, O., Theliander, H. (2010) Xylan sorption kinetics at industrial conditions Part 1. Experimental results. Nord. Pulp Pap. Res. J. 25:138-149.
29. Schönberg, C., Oksanem, T., Suurnäkki, A., Kettunem, H., Buchert, J. (2001) The importance of xylan for the strength properties of spruce kraft fibres. Holzforschung 55:639-644. (Pubitemid 34046209)
30. Sihtola, H., Blomberg, L. (1975) Hemicelluloses precipitated from steeping liquor in the viscose process as additives in papermaking. Cellul. Chem. Technol. 9:555-560.
31. Sjöberg, J., Kleen, M., Dahlman, O., Agnemo, R., Sundvall, H. (2002) Analysis of carbohydrate and lignin in the surface and inner layers of softwood pulp fibers obtained employing various alkaline cooking process. Nord. Pulp Pap. Res. J. 17:295-301. (Pubitemid 35208591)
32. Spiegelberg, H.L. (1966) The effect of hemicelluloses on the mechanical properties of individual pulp fibres. Tappi J. 49:388-398.
33. 13C NMR spectroscopy. Carbohydr. Res. 272:55-71.
34. Vuorinen, T., Fagerström, P., Buchert, J., Tenkanen, M., Teleman, A. (1999) Selective hydrolysis of hexenuronic acid groups and its application in ECF and TCF bleaching of kraft pulps. J. Pulp Pap. Sci. 25:155-162.
35. Wallis, A.F.A., Wearne, R.H., Wright, P.J. (1996) Chemical analysis of polysaccharides in plantation eucalypt woods and pulps. Appita J. 49:258-262. (Pubitemid 126557784)
36. Westbye, P., Köhnke, T., Glasser, W., Gatenholm, P. (2007) The influence of lignin on the self-assembly behavior of xylan rich fractions from birch (Betula pendula). Cellulose 14:603-613. (Pubitemid 350055462)
37. Yllner, S., Enström, B. (1956) Studies of the adsorption of xylan on cellulose fibres during the sulphate cook. Part. 1. Svensk Papperstidn. 56:229-232.
38. Yllner, S., Enström, B. (1957) Studies of the adsorption of xylan on cellulose fibres during the sulphate cook. Part. 2. Svensk Papperstidn. 60:449.