Design principles for the area density of dimple patterns

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 229, Issue 4, 2015, Pages 538-546

  Wang, Xiaolei ^a,b   Wang, Jingqiu ^a,b   Zhang, Bo ^a   Huang, Wei ^a,b  

^a NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS   (China)

^b Jiangsu Key Laboratory of Precision and Micro Manufacturing Technology   (China)

Author keywords

area density; deformation; friction; stress concentration; Surface texture

Indexed keywords

DEFORMATION; FRICTION; HYDRODYNAMICS; STRESS CONCENTRATION; TRIBOLOGY;

AREA DENSITY; DESIGN PRINCIPLES; HYDRODYNAMIC PRESSURE; MIXED LUBRICATION; SURFACE TEXTURES; SURFACE-TEXTURING; TEXTURED SURFACE; TRIBOLOGICAL PROPERTIES;

TEXTURES;

EID: 84925444111     PISSN: 13506501     EISSN: 2041305X     Source Type: Journal    
DOI: 10.1177/1350650114531939     Document Type: Article

References (44)

1. Ilevbare IM, Probert D, Phaal R. A review of TRIZ, and its benefits and challenges in practice. Technovation. 2013 ; 33 (2-3). 30-37
2. Petković D, Issa M, Pavlović ND, et al. Application of the TRIZ creativity enhancement approach to design of passively compliant robotic joint. Int J Adv Manuf Technol. 2012 ; 67 (1-4). 865-875
3. Michail SK, Barber GC. The effects of roughness on piston ring lubrication - Part II: The relationship between cylinder wall surface topography and oil film thickness. Tribol Trans. 1995 ; 38 (1). 173-177
4. Spencer A, Almqvist A, Larsson R. A semi-deterministic texture-roughness model of the piston ring-cylinder liner contact. Proc IMechE, Part J: J Engineering Tribology. 2011 ; 225 (6). 325-333
5. Rahnejat H, Balakrishnan S, King PD, et al. In-cylinder friction reduction using a surface finish optimization technique. Proc IMechE, Part D: J Automobile Engineering. 2006 ; 220 (9). 1309-1318
6. Stephens LS, Siripuram R, Hayden M, et al. Deterministic micro asperities on bearings and seals using a modified LIGA process. J Eng Gas Turbines Power. 2004 ; 126: 147-154
7. Yu H, Wang X, Zhou F. Geometric shape effects of surface texture on the generation of hydrodynamic pressure between conformal contacting surfaces. Tribol Lett. 2010 ; 37 (2). 123-130
8. Shen C, Khonsari MM. Effect of dimple's internal structure on hydrodynamic lubrication. Tribol Lett. 2013 ; 52 (3). 415-430
9. Brizmer V, Kligerman Y, Etsion I. A laser surface textured parallel thrust bearing. Tribol Trans. 2003 ; 46 (3). 397-403
10. Wang XL, Adachi K, Otsuka K, et al. Optimization of the surface texture for silicon carbide sliding in water. Appl Surf Sci. 2006 ; 253 (3). 1282-1286
11. Shen C, Huang W, Ma GL, et al. A novel surface texture for magnetic fluid lubrication. Surf Coat Technol. 2009 ; 204 (4). 433-439
12. Huang W, Wang X. Biomimetic design of elastomer surface pattern for friction control under wet conditions. Bioinspir Biomim. 2013 ; 8 (4). 046001-046001
13. Buselli E, Pensabene V, Castrataro P, et al. Evaluation of friction enhancement through soft polymer micro-patterns in active capsule endoscopy. Meas Sci Technol. 2010 ; 21 (10). 105802-105802
14. Yu H, Huang W, Wang X. Dimple patterns design for different circumstances. Lubric Sci. 2013 ; 25: 67-78
15. Hamilton DB, Walowit JA, Allen CM. A theory of lubrication by micro-irregularities. J Basic Eng. 1966 ; 88 (1). 177-185
16. Qiu Y, Khonsari MM. Experimental investigation of tribological performance of laser textured stainless steel rings. Tribol Int. 2011 ; 44 (5). 635-644
17. Fowell M, Olver AV, Gosman AD, et al. Entrainment and inlet suction: Two mechanisms of hydrodynamic lubrication in textured bearings. J Tribol. 2007 ; 129: 336-347
18. Brajdic-Mitidieri P, Gosman AD, Ioannides E, et al. CFD analysis of a low friction pocketed pad bearing. J Tribol Trans ASME. 2005 ; 127 (4). 803-812
19. Shen C, Khonsari MM. On the magnitude of cavitation pressure of steady-state lubrication. Tribol Lett. 2013 ; 51 (1). 153-160
20. Zhang J, Meng Y. Direct observation of cavitation phenomenon and hydrodynamic lubrication analysis of textured surfaces. Tribol Lett. 2012 ; 46 (2). 147-158
21. Han J, Fang L, Sun J, et al. Hydrodynamic lubrication of microdimple textured surface using three-dimensional CFD. Tribol Trans. 2010 ; 53 (6). 860-870
22. Nakano M, Korenaga A, Korenaga A, et al. Applying micro-texture to cast iron surfaces to reduce the friction coefficient under lubricated conditions. Tribol Lett. 2007 ; 28: 131-137
23. Yan D, Qu N, Li H, et al. Significance of dimple parameters on the friction of sliding surfaces investigated by orthogonal experiments. Tribol Trans. 2010 ; 53 (5). 703-712
24. Etsion I, Burstein L. A model for mechanical seals with regular microsurface structure. Tribol Trans. 1996 ; 39 (3). 677-683
25. Wang XL, Kato K, Adachi K, et al. Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water. Tribol Int. 2003 ; 36 (3). 189-197
26. Murthy AN, Etsion I, Talke FE. Analysis of surface textured air bearing sliders with rarefaction effects. Tribol Lett. 2007 ; 28: 251-261
27. Kligerman Y, Etsion I. Analysis of the hydrodynamic effects in a surface textured circumferential gas seal. Tribol Trans. 2001 ; 44 (3). 472-478
28. Shinkarenko A, Kligerman Y, Etsion I. The effect of surface texturing in soft elasto-hydrodynamic lubrication. Tribol Int. 2009 ; 42 (2). 284-292
29. Wang XL, Kato K, Adachi K, et al. The effect of laser texturing of SiC surface on the critical load for transition of water lubrication mode from hydrodynamic to mixed. Tribol Int. 2001 ; 34 (10). 703-711
30. Ryk G, Kligerman Y, Etsion I. Experimental investigation of laser surface texturing for reciprocating automotive components. Tribol Trans. 2002 ; 45 (4). 444-449
31. Kovalchenko A, Ajayi O, Erdemir A, et al. The effect of laser texturing of steel surfaces and speed-load parameters on the transition of lubrication regime from boundary to hydrodynamic. Tribol Trans. 2004 ; 47 (2). 299-307
32. Kovalchenko A, Ajayi O, Erdemir A, et al. The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact. Tribol Int. 2005 ; 38 (3). 219-225
33. Costa HL, Hutchings IM. Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions. Tribol Int. 2007 ; 40 (8). 1227-1238
34. Galda L, Pawlus P, Sep J. Dimples shape and distribution effect on characteristics of Stribeck curve. Tribol Int. 2009 ; 42 (10). 1505-1512
35. Grabon W, Koszela W, Pawlus P, et al. Improving tribological behaviour of piston ring-cylinder liner frictional pair by liner surface texturing. Tribol Int. 2013 ; 61: 102-108
36. Wang XL, Kato K, Adachi K. The lubrication effect of micro-pits on parallel sliding faces of SiC in water. Tribol Trans. 2002 ; 45 (3). 294-301
37. Wang XL, Kato K. Improving the anti-seizure ability of SiC seal in water with RIE texturing. Tribol Lett. 2003 ; 14 (4). 275-280
38. Zum Gahr KH, Mathieu M, Brylka B. Friction control by surface engineering of ceramic sliding pairs in water. Wear. 2007 ; 263 (7-12). 920-929
39. Halperin G, Greenberg Y and Etsion I. Increasing mechanical seals life with laser-textured seal faces. In: Proceedings of the 15th International Conference on Fluid Sealing-BHR Group, Maastricht, 1997, pp.3-11.
40. Zhang B, Huang W, Wang X. Biomimetic surface design for ultrahigh molecular weight polyethylene to improve the tribological properties. Proc IMechE, Part J: J Engineering Tribology. 2012 ; 226 (8). 705-713
41. Zhang B, Huang W, Wang J, et al. Comparison of the effects of surface texture on the surfaces of steel and UHMWPE. Tribol Int. 2013 ; 65: 138-145
42. Huang W, Jiang L, Zhou C, et al. The lubricant retaining effect of micro-dimples on the sliding surface of PDMS. Tribol Int. 2012 ; 52: 87-93
43. Yuan S, Huang W, Wang X. Orientation effects of micro-grooves on sliding surfaces. Tribol Int. 2011 ; 44 (9). 1047-1054
44. Yagi K, Sugimura J. Elastohydrodynamic simulation of Rayleigh step bearings in thin film hydrodynamic lubrication. Tribol Int. 2013 ; 64: 204-214