An integrated framework for combined designing dematerialised machine tools and production systems enabling flexibility-oriented business models

International Journal of Computer Integrated Manufacturing

Volumn 28, Issue 4, 2015, Pages 353-363

  Copani, Giacomo ^a   Leonesio, Marco ^a   Tosatti, Lorenzo Molinari ^a   Pellegrinelli, Stefania ^a   Urgo, Marcello ^b   Valente, Anna ^c  

^a CNR   (Italy)

^b POLITECNICO DI MILANO   (Italy)

^c UNIVERSITY OF APPLIED SCIENCES AND ARTS OF SOUTHERN SWITZERLAND   (Switzerland)

Author keywords

Demat machine tools and process design; Demat manufacturing systems; Energy conscious design

Indexed keywords

COMMERCE; MANUFACTURE; SYSTEMS ANALYSIS;

ENERGY CONSCIOUS DESIGN; INDUSTRIAL PRACTICES; INTEGRATED FRAMEWORKS; MINIMUM REQUIREMENTS; PRODUCTION DEMAND; PRODUCTION SYSTEM; PRODUCTION SYSTEM DESIGNS; SYSTEM CONFIGURATIONS;

MACHINE TOOLS;

EID: 84924959215     PISSN: 0951192X     EISSN: 13623052     Source Type: Journal    
DOI: 10.1080/0951192X.2014.914632     Document Type: Article

References (37)

1. Abedini, V., M. Shakeri, M. H. Siahmargouei, and H. Baseri. 2013. "Automated Process Planning System: A New Method for Setup Planning and a Mathematical Model for Fixture Design." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Accessed July 15. http://pib.sagepub.com/content/early/2013/07/15/0954405413492731
2. Alfieri, A., T. Tolio, and M. Urgo. 2012. "A Two-Stage Stochastic Programming Project Scheduling Approach to Production Planning." The International Journal of Advanced Manufacturing Technology 62: 279-290. doi:10.1007/s00170-011-3794-4.
3. Altintaş, Y., and E. Budak. 1995. "Analytical Prediction of Stability Lobes in Milling." CIRP Annals - Manufacturing Technology 44: 357-362. doi:10.1016/S0007-8506(07) 62342-7.
4. Amico, M., F. M. Asl, Z. Pasek, and G. Perrone. 2006. "Real Options: An Application to RMS Investment Evaluation." In Reconfigurable Manufacturing Systems and Transformable Factories, edited by A. I. Dashchenko, 675-693. Netherlands: Springer.
5. Attila, R., M. Stampfer, and S. Imre. 2013. "Fixture and Setup Planning and Fixture Configuration System." Procedia CIRP 7: 228-233. doi:10.1016/j.procir.2013.05.039.
6. Bengtsson, J. 2001. "Manufacturing Flexibility and Real Options: A Review." International Journal of Production Economics 74 (1-3): 213-224. doi:10.1016/S0925-5273 (01)00128-1.
7. Birrge, J. R., and F. V. Louveaux. 1997. Introduction to Stochastic Programming. London: Springer.
8. Brecher, C., M. Esser, and S. Witt. 2009. "Interaction of Manufacturing Process and Machine Tool." CIRP Annals - Manufacturing Technology 58(2): 588-607. doi:10.1016/j.cirp.2009.09.005.
9. Cau, N., M. Leonesio, E. Zanotti, P. Parenti, and G. Bianchi. 2009. "Integrated Machine Tool Design." Proceedings of the 2nd International. Researchers Symposium 2009 on Innovative Production Machines and Systems (IPROMS), Ischia, July 22-24.
10. Contini, P., and T. Tolio. 2004. "Computer-Aided Set-Up Planning for Machining Centres Configuration." International Journal of Production Research 42: 3473-3491. doi:10.1080/00207540410001695998.
11. Copani, G., M. Leonesio, L. Molinari Tosatti, S. Pellegrinelli, M. Urgo, A. Valente, and J. Zulaika. 2012. "Holistic Approach for Jointly Designing Dematerialized Machine Tools and Production Systems Enabling Flexibility-Oriented Business Models." 19th CIRP International Conference on Life Cycle Engineering, Berkeley, CA, May 23-25.
12. Copani, G., and M. Urgo. 2012. "New Business Models and Configuration Approaches for Focused-Flexibility Manufacturing Systems." 1st CIRP Global Web Conference: Interdisciplinary Research in Production Engineering, Procedia CIRP, Elsevier. doi:10.1016/j.procir.2012.05.031.
13. Damodoran, A. 2008. Strategic Risk Taking. Upper Saddle River, NJ: Pearson Education.
14. Gurevsky, E., O. Battaïa, and A. Dolgui. 2013. "Stability Measure for a Generalized Assembly Line Balancing Problem." Discrete Applied Mathematics 161 (3): 377-394. doi:10.1016/j.dam.2012.08.037.
15. Gurevsky, E., Ö. Hazir, O. Battaïa, and A. Dolgui. 2013. "Robust Balancing of Straight Assembly Lines with Interval Task Times." Journal of the Operational Research Society 64 (11): 1607-1613. doi:10.1057/jors.2012.139.
16. ISO14649. 2003. Data Model for Computerized Numerical Controllers - Parts 1,10, 11. Geneva: ISO/TC 184/SC 1.
17. Kafashi, S. 2011. "Integrated Setup Planning and Operation Sequencing (ISOS) Using Genetic Algorithm." The International Journal of Advanced Manufacturing Technology 56: 589-600. doi:10.1007/s00170-011-3202-0.
18. Koren, Y., and M. Shpitalni. 2010. "Design of Reconfigurable Manufacturing Systems." Journal of Manufacturing Systems 29 (4): 130-141. doi:10.1016/j.jmsy.2011.01.001.
19. Leonesio, M., G. Bianchi, and A. Brondi. 2006. "Machine- Process Interaction Analysis." CIRP 2nd International Conference on High Performance Cutting (HPC), Vancouver, June 12-13.
20. Leonesio, M., L. Molinari Tosatti, S. Pellegrinelli, and A. Valente. 2013. "An Integrated Approach to Support the Joint Design of Machine Tools and Process Planning." CIRP Journal of Manufacturing Science and Technology 6 (3): 181-186. doi:10.1016/j.cirpj.2013.03.002.
21. Mehrabi, M. G., A. G. Ulsoy, and Y. Koren. 2000. "Reconfigurable Manufacturing Systems: Key to Future Manufacturing." Journal of Intelligent Manufacturing 11 (4): 403-419. doi:10.1023/A:1008930403506.
22. Meier, H., R. Roy, and G. Seliger. 2010. "Industrial Product- Service Systems-Ips2." CIRP Annals - Manufacturing Technology 59 (2): 607-627. doi:10.1016/j.cirp.2010.05.004.
23. Merdol, S. D., and Y. Altintas. 2008. "Virtual Cutting and Optimization of Three-Axis Milling Processes." International Journal of Machine Tools and Manufacture 48 (10): 1063-1071. doi:10.1016/j.ijmachtools.2008.03.004.
24. Mohapatra, P., L. Benyoucef, and M. K. Tiwari. 2013. "Realising Process Planning and Scheduling Integration through Adaptive Setup Planning." International Journal of Production Research 51 (8): 2301-2323.
25. Newman, S. T., A. Nassehi, R. Imani-Asrai, and V. Dhokia. 2012. "Energy Efficient Process Planning for CNC Machining." CIRP Journal of Manufacturing Science and Technology 5 (2): 127-136. doi:10.1016/j.cirpj.2012.03.007.
26. Pellegrinelli, S., and T. Tolio. 2013. "Pallet Operation Sequencing Based on Network Part Program Logic." Robotics and Computer-Integrated Manufacturing 29 (5): 322-345. doi:10.1016/j.rcim.2013.02.001.
27. Pellegrinelli, S., A. Valente, and L. Molinari Tosatti. 2012. "An Integrated Setup Planning and Pallet Configuration Approach for Highly Automated Production Systems with Energy Modelling of Manufacturing Operations." 45th CIRP Conference on Manufacturing Systems, Procedia CIRP 3: 49-54. May 16-18. doi:10.1016/j.procir.2012.07.010.
28. Quintana, G., and J. Ciurana. 2011. "Chatter in Machining Processes: A Review." International Journal of Machine Tools and Manufacture 51 (5): 363-376. doi:10.1016/j.ijmachtools.2011.01.001.
29. Rameshbabu, V., and M. S. Shunmugam. 2009. "Hybrid Feature Recognition Method for Setup Planning from STEP AP- 203." Robotics and Computer-Integrated Manufacturing 25 (2): 393-408. doi:10.1016/j.rcim.2007.09.014.
30. Terkaj, W., T. Tolio, and A. Valente. 2009. "Design of Focused Flexibility Manufacturing Systems (FFMSs)." In Design of Flexible Production Systems - Methodologies and Tools, edited by T. Tolio, 137-190. Berlin: Springer.
31. Tolio, T., and M. Urgo. 2007. "A Rolling Horizon Approach to Plan Outsourcing in Manufacturing-To-Order Environments Affected by Uncertainty." CIRP Annals - Manufacturing Technology 56: 487-490. doi:10.1016/j.cirp.2007.05.116.
32. Tolio, T., and M. Urgo. 2013. "Design of Flexible Transfer Lines: A Case-Based Reconfiguration Cost Assessment." Journal of Manufacturing Systems 32 (2): 325-334. doi:10.1016/j.jmsy.2012.12.003.
33. Tunç, L. T., and E. Budak. 2012. "Effect of Cutting Conditions and Tool Geometry on Process Damping in Machining." International Journal of Machine Tools and Manufacture 57: 10-19. doi:10.1016/j.ijmachtools.2012.01.009.
34. Van Brussel, H., P. Sas, I. Nemeth, P. De Fonseca, and P. den Braembussche. 2001. "Towards a Mechatronic Compiler." IEEE/ASME Transactions on Mechatronics 6 (1): 90-105 IEEE. doi:10.1109/3516.914395.
35. Wang, L., H. Y. Feng, and N. Cai. 2003. "Architecture Design for Distributed Process Planning." Journal of Manufacturing Systems 22 (2): 99-115. doi:10.1016/S0278-6125(03) 90008-2.
36. Yao, S., X. Han, Y. Yang, Y. K. Rong, S. H. Huang, D. W. Yen, and G. Zhang. 2007. "Computer Aided Manufacturing Planning for Mass Customization: Part 2, Automated Setup Planning." The International Journal of Advanced Manufacturing Technology 32: 205-217. doi:10.1007/s00170-005-0328-y.
37. Zulaika, J. J., F. J. Campa, and L. N. Lopez de Lacalle. 2011. "An Integrated Process-Machine Approach for Designing Productive and Lightweight Milling Machines." International Journal of Machine Tools and Manufacture 51 (7-8): 591-604. doi:10.1016/j.ijmachtools.2011.04.003.