메뉴 건너뛰기




Volumn 72, Issue , 2015, Pages 65-74

Improving the interlaminar properties of polymer composites using a situ accumulation method to construct the multi-scale reinforcement of carbon nanofibers/carbon fibers

Author keywords

A. Carbon fibre; A. Nano structures; B. Delamination; E. Lay up

Indexed keywords

CARBON; CARBON FIBER REINFORCED PLASTICS; CARBON FIBERS; CARBON NANOFIBERS; COMPOSITE MATERIALS; FIBER REINFORCED PLASTICS; FRACTURE TOUGHNESS; NANOFIBERS; NANOSTRUCTURES; POLYAMIDES; RAYON; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; SHEAR STRENGTH;

EID: 84923362599     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2015.01.023     Document Type: Article
Times cited : (44)

References (55)
  • 2
    • 84865464326 scopus 로고    scopus 로고
    • Impact and delamination failure of multiscale carbon nanotube-fiber reinforced polymer composites: A review
    • S.U. Khan, and J.K. Kim Impact and delamination failure of multiscale carbon nanotube-fiber reinforced polymer composites: a review Int J Aeronaut Space Sci 12 2 2011 115 133
    • (2011) Int J Aeronaut Space Sci , vol.12 , Issue.2 , pp. 115-133
    • Khan, S.U.1    Kim, J.K.2
  • 3
    • 75749108202 scopus 로고    scopus 로고
    • The effect of adding carbon nanotubes to glass/epoxy composites in the fibre sizing and/or the matrix
    • A. Warrier, A. Godara, O. Rochez, L. Mezzo, F. Luizi, and L. Gorbatikh The effect of adding carbon nanotubes to glass/epoxy composites in the fibre sizing and/or the matrix Compos Part A - Appl Sci Manufact 41 4 2010 532 538
    • (2010) Compos Part A - Appl Sci Manufact , vol.41 , Issue.4 , pp. 532-538
    • Warrier, A.1    Godara, A.2    Rochez, O.3    Mezzo, L.4    Luizi, F.5    Gorbatikh, L.6
  • 4
    • 40249092953 scopus 로고    scopus 로고
    • Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes
    • Z.H. Fan, M.H. Santare, and S.G. Advani Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes Compos Part A - Appl Sci Manufact 39 3 2008 540 554
    • (2008) Compos Part A - Appl Sci Manufact , vol.39 , Issue.3 , pp. 540-554
    • Fan, Z.H.1    Santare, M.H.2    Advani, S.G.3
  • 5
    • 80051577938 scopus 로고    scopus 로고
    • Influence of resin type on the delamination behavior of carbon fiber reinforced composites under mode-II loading
    • A. Arguelles, J. Vina, A.F. Canteli, and J. Bonhomme Influence of resin type on the delamination behavior of carbon fiber reinforced composites under mode-II loading Int J Damage Mech 20 7 2011 963 978
    • (2011) Int J Damage Mech , vol.20 , Issue.7 , pp. 963-978
    • Arguelles, A.1    Vina, J.2    Canteli, A.F.3    Bonhomme, J.4
  • 6
    • 84866057544 scopus 로고    scopus 로고
    • Recent progress in fabrication, structure, and properties of carbon fibers
    • Y.D. Liu, and S. Kumar Recent progress in fabrication, structure, and properties of carbon fibers Polym Rev 52 3-4 2012 234 258
    • (2012) Polym Rev , vol.52 , Issue.34 , pp. 234-258
    • Liu, Y.D.1    Kumar, S.2
  • 7
    • 84883049389 scopus 로고    scopus 로고
    • Recent progress in interfacial toughening and damage self-healing of polymer composites based on electrospun and solution-blown nanofibers: An overview
    • X.-F. Wu, and A.L. Yarin Recent progress in interfacial toughening and damage self-healing of polymer composites based on electrospun and solution-blown nanofibers: an overview J Appl Polym Sci 130 4 2013 2225 2237
    • (2013) J Appl Polym Sci , vol.130 , Issue.4 , pp. 2225-2237
    • Wu, X.-F.1    Yarin, A.L.2
  • 8
    • 0028256905 scopus 로고
    • Improving the delamination resistance of CFRP by stitching - A review
    • K. Dransfield, C. Baillie, and Y.-W. Mai Improving the delamination resistance of CFRP by stitching - a review Compos Sci Technol 50 3 1994 305 317
    • (1994) Compos Sci Technol , vol.50 , Issue.3 , pp. 305-317
    • Dransfield, K.1    Baillie, C.2    Mai, Y.-W.3
  • 10
    • 0031341188 scopus 로고    scopus 로고
    • A review of the effect of stitching on the inplane mechanical properties of fibre-reinforced polymer composites
    • A.P. Mouritz, K.H. Leong, and I. Hersberg A review of the effect of stitching on the inplane mechanical properties of fibre-reinforced polymer composites Compos Part A - Appl Sci Manufact 28A 1997 979 991
    • (1997) Compos Part A - Appl Sci Manufact , vol.28 A , pp. 979-991
    • Mouritz, A.P.1    Leong, K.H.2    Hersberg, I.3
  • 11
    • 42649093177 scopus 로고    scopus 로고
    • 2D braided composites: A review for stiffness critical applications
    • C. Ayyanci, and C.J. Carey 2D braided composites: a review for stiffness critical applications Compos Struct 85 2008 43 58
    • (2008) Compos Struct , vol.85 , pp. 43-58
    • Ayyanci, C.1    Carey, C.J.2
  • 12
    • 33745964340 scopus 로고    scopus 로고
    • Modes i and II interlaminar fracture toughness and fatigue delamination of CF/epoxy laminates with self-same epoxy interleaf
    • M. Hojo, T. Ando, M. Tanaka, T. Adachi, S. Ochiai, and Endo.Y. Modes Modes I and II interlaminar fracture toughness and fatigue delamination of CF/epoxy laminates with self-same epoxy interleaf Int J Fatigue 28 2006 1154 1165
    • (2006) Int J Fatigue , vol.28 , pp. 1154-1165
    • Hojo, M.1    Ando, T.2    Tanaka, M.3    Adachi, T.4    Ochiai, S.5    Modes Endo., Y.6
  • 13
    • 77950063863 scopus 로고    scopus 로고
    • A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned composites
    • A.P. Mouritz, and B.N. Cox A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned composites Compos Part A - Appl Sci Manufact 41 6 2010 709 728
    • (2010) Compos Part A - Appl Sci Manufact , vol.41 , Issue.6 , pp. 709-728
    • Mouritz, A.P.1    Cox, B.N.2
  • 14
    • 75449101175 scopus 로고    scopus 로고
    • A review of interphase formation and design in fibre-reinforced composites
    • F.R. Jones A review of interphase formation and design in fibre-reinforced composites J Adhes Sci Technol 24 1 2010 171 202
    • (2010) J Adhes Sci Technol , vol.24 , Issue.1 , pp. 171-202
    • Jones, F.R.1
  • 16
    • 84875870831 scopus 로고    scopus 로고
    • Phase structures and mechanical properties of SGF/PP composites with and without compatilizers
    • D.M. Batisdas, and Y.Q. Chang Phase structures and mechanical properties of SGF/PP composites with and without compatilizers Adv Mater Res 668 2013 33 36
    • (2013) Adv Mater Res , vol.668 , pp. 33-36
    • Batisdas, D.M.1    Chang, Y.Q.2
  • 18
    • 84857833628 scopus 로고    scopus 로고
    • Enhancing interlaminar fracture characteristics of woven CFRP prepreg composites through CNT dispersion
    • S.C. Joshi, and V. Dikshit Enhancing interlaminar fracture characteristics of woven CFRP prepreg composites through CNT dispersion J Compos Mater 46 6 2012 665 675
    • (2012) J Compos Mater , vol.46 , Issue.6 , pp. 665-675
    • Joshi, S.C.1    Dikshit, V.2
  • 19
    • 37349028020 scopus 로고    scopus 로고
    • Mode i and mode II interlaminar fracture toughness of CFRP laminates toughened by carbon nanofiber interlayer
    • M. Arai, Y. Noro, K.-I. Sugimoto, and M. Endo Mode I and mode II interlaminar fracture toughness of CFRP laminates toughened by carbon nanofiber interlayer Compos Sci Technol 68 2 2008 516 525
    • (2008) Compos Sci Technol , vol.68 , Issue.2 , pp. 516-525
    • Arai, M.1    Noro, Y.2    Sugimoto, K.-I.3    Endo, M.4
  • 20
    • 80053335282 scopus 로고    scopus 로고
    • Mechanical characterization of hierarchical carbon fiber/nanofiber composite laminates
    • D.R. Bortz, C. Merino, and I. Martin-Gullon Mechanical characterization of hierarchical carbon fiber/nanofiber composite laminates Compos Part A - Appl Sci Manufact 42 11 2011 1584 1591
    • (2011) Compos Part A - Appl Sci Manufact , vol.42 , Issue.11 , pp. 1584-1591
    • Bortz, D.R.1    Merino, C.2    Martin-Gullon, I.3
  • 21
    • 78651446600 scopus 로고    scopus 로고
    • Multi-scale hybrid composites-based carbon nanotubes
    • Y.K. Wang, Z.W. Xu, L. Chen, Y.N. Jiao, and X.Q. Wu Multi-scale hybrid composites-based carbon nanotubes Polym Compos 32 2 2011 159 167
    • (2011) Polym Compos , vol.32 , Issue.2 , pp. 159-167
    • Wang, Y.K.1    Xu, Z.W.2    Chen, L.3    Jiao, Y.N.4    Wu, X.Q.5
  • 22
    • 67650831267 scopus 로고    scopus 로고
    • Preparation and properties of nanoparticle and long-fiber-reinforced unsaturated polyester composites
    • G. Zhou, S. Movva, and L.J. Lee Preparation and properties of nanoparticle and long-fiber-reinforced unsaturated polyester composites Polym Compos 30 7 2009 861 865
    • (2009) Polym Compos , vol.30 , Issue.7 , pp. 861-865
    • Zhou, G.1    Movva, S.2    Lee, L.J.3
  • 23
    • 84860681499 scopus 로고    scopus 로고
    • Interlaminar fatigue crack growth behavior of MWCNT/carbon fiber reinforced hybrid composites monitored via newly developed acoustic emission method
    • G. Romhany, and G. Szebenyi Interlaminar fatigue crack growth behavior of MWCNT/carbon fiber reinforced hybrid composites monitored via newly developed acoustic emission method Express Polym Lett 6 7 2012 572 580
    • (2012) Express Polym Lett , vol.6 , Issue.7 , pp. 572-580
    • Romhany, G.1    Szebenyi, G.2
  • 24
    • 0036645628 scopus 로고    scopus 로고
    • Nanoclay reinforcement effects on the cryogenic microcracking of carbon fiber/epoxy composites
    • J.F. Timmerman, B.S. Hayes, and J.C. Seferis Nanoclay reinforcement effects on the cryogenic microcracking of carbon fiber/epoxy composites Compos Sci Technol 62 9 2002 1249 1258
    • (2002) Compos Sci Technol , vol.62 , Issue.9 , pp. 1249-1258
    • Timmerman, J.F.1    Hayes, B.S.2    Seferis, J.C.3
  • 25
    • 35549004076 scopus 로고    scopus 로고
    • 2) nanoparticles and ammonia/ethylene plasma treatment on the interfacial and mechanical properties of carbon-fiber-reinforced epoxy composites
    • 2) nanoparticles and ammonia/ethylene plasma treatment on the interfacial and mechanical properties of carbon-fiber-reinforced epoxy composites J Adhes Sci Technol 21 14 2007 1407 1424
    • (2007) J Adhes Sci Technol , vol.21 , Issue.14 , pp. 1407-1424
    • Lew, C.1    Chowdhury, F.2    Hosur, M.V.3    Netravali, A.N.4
  • 26
    • 84859121867 scopus 로고    scopus 로고
    • Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide
    • X.Q. Zhang, X.Y. Fan, C. Yan, H.Z. Li, Y.D. Zhu, and X.T. Li Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide ACS Appl Mater Interfaces 4 3 2012 1543 1552
    • (2012) ACS Appl Mater Interfaces , vol.4 , Issue.3 , pp. 1543-1552
    • Zhang, X.Q.1    Fan, X.Y.2    Yan, C.3    Li, H.Z.4    Zhu, Y.D.5    Li, X.T.6
  • 27
    • 84858442448 scopus 로고    scopus 로고
    • A review of strategies for improving the degradation properties of laminated continuous-fiber/epoxy composites with carbon-based nanoreinforcements
    • G. Lubineau, and A. Rahaman A review of strategies for improving the degradation properties of laminated continuous-fiber/epoxy composites with carbon-based nanoreinforcements Carbon 50 7 2012 2377 2395
    • (2012) Carbon , vol.50 , Issue.7 , pp. 2377-2395
    • Lubineau, G.1    Rahaman, A.2
  • 28
    • 80054974208 scopus 로고    scopus 로고
    • Reinforcement effects of MWCNT and VGCF in bulk composites and interlayer of CFRP laminates
    • N. Hu, Y. Li, T. Nakamura, T. Katsumata, T. Koshikawa, and M. Arai Reinforcement effects of MWCNT and VGCF in bulk composites and interlayer of CFRP laminates Compos Part B - Eng 43 1 2012 3 9
    • (2012) Compos Part B - Eng , vol.43 , Issue.1 , pp. 3-9
    • Hu, N.1    Li, Y.2    Nakamura, T.3    Katsumata, T.4    Koshikawa, T.5    Arai, M.6
  • 29
    • 84871201023 scopus 로고    scopus 로고
    • Effect of deposited carbon nanotubes on interlaminar properties of carbon fiber-reinforced epoxy composites using a developed spraying processing
    • F.L. Shan, Y.Z. Gu, M. Li, Y.N. Liu, and Z.G. Zhang Effect of deposited carbon nanotubes on interlaminar properties of carbon fiber-reinforced epoxy composites using a developed spraying processing Polym Compos 34 1 2013 41 50
    • (2013) Polym Compos , vol.34 , Issue.1 , pp. 41-50
    • Shan, F.L.1    Gu, Y.Z.2    Li, M.3    Liu, Y.N.4    Zhang, Z.G.5
  • 30
    • 33646446022 scopus 로고    scopus 로고
    • Small but strong: A review of the mechanical properties of carbon nanotube-polymer composites
    • J.N. Coleman, U. Khan, W.J. Blau, and Y.K. Gun'ko Small but strong: a review of the mechanical properties of carbon nanotube-polymer composites Carbon 44 9 2006 1624 1652
    • (2006) Carbon , vol.44 , Issue.9 , pp. 1624-1652
    • Coleman, J.N.1    Khan, U.2    Blau, W.J.3    Gun'Ko, Y.K.4
  • 31
    • 1642276212 scopus 로고    scopus 로고
    • Experimental investigation of dispersion during flow of multi-walled carbon nanotube/polymer suspension in fibrous porous media
    • Z.H. Fan, K.T. Hsiao, and S.G. Advani Experimental investigation of dispersion during flow of multi-walled carbon nanotube/polymer suspension in fibrous porous media Carbon 42 4 2004 871 876
    • (2004) Carbon , vol.42 , Issue.4 , pp. 871-876
    • Fan, Z.H.1    Hsiao, K.T.2    Advani, S.G.3
  • 32
    • 34250755364 scopus 로고    scopus 로고
    • Carbon nanotube integrated multifunctional multiscale composites
    • J.Q. Qiu, C. Zhang, B. Wang, and R. Liang Carbon nanotube integrated multifunctional multiscale composites Nanotechnology 18 27 2007
    • (2007) Nanotechnology , vol.18 , Issue.27
    • Qiu, J.Q.1    Zhang, C.2    Wang, B.3    Liang, R.4
  • 33
    • 77953686972 scopus 로고    scopus 로고
    • Nanocomposites based on vapor-grown carbon nanofibers and an epoxy: Functionalization, preparation and characterization
    • D.H. Wang, S. Sihn, A.K. Roy, J.-B. Baek, and L.-S. Tan Nanocomposites based on vapor-grown carbon nanofibers and an epoxy: functionalization, preparation and characterization Eur Polymer J 46 7 2010 1404 1416
    • (2010) Eur Polymer J , vol.46 , Issue.7 , pp. 1404-1416
    • Wang, D.H.1    Sihn, S.2    Roy, A.K.3    Baek, J.-B.4    Tan, L.-S.5
  • 35
    • 84862805838 scopus 로고    scopus 로고
    • Interfacial shear behavior of 3D composites reinforced with CNT-grafted carbon fibers
    • L. Yang, X.D. He, L. Mei, L.Y. Tong, R.G. Wang, and Y.B. Li Interfacial shear behavior of 3D composites reinforced with CNT-grafted carbon fibers Compos Part A - Appl Sci Manufact 43 8 2012 1410 1418
    • (2012) Compos Part A - Appl Sci Manufact , vol.43 , Issue.8 , pp. 1410-1418
    • Yang, L.1    He, X.D.2    Mei, L.3    Tong, L.Y.4    Wang, R.G.5    Li, Y.B.6
  • 36
    • 42249111521 scopus 로고    scopus 로고
    • Growth of carbon nanotubes on carbon fibre substrates to produce hybrid/phenolic composites with improved mechanical properties
    • R.B. Mathur, S. Chatterjee, and B.P. Singh Growth of carbon nanotubes on carbon fibre substrates to produce hybrid/phenolic composites with improved mechanical properties Compos Sci Technol 68 7-8 2008 1608 1615
    • (2008) Compos Sci Technol , vol.68 , Issue.78 , pp. 1608-1615
    • Mathur, R.B.1    Chatterjee, S.2    Singh, B.P.3
  • 37
    • 84879401446 scopus 로고    scopus 로고
    • Experimental torsional shear properties of carbon fiber reinforced epoxy composites containing carbon nanotubes
    • N.A. Siddiqui, S.U. Khan, and J.-K. Kim Experimental torsional shear properties of carbon fiber reinforced epoxy composites containing carbon nanotubes Compos Struct 104 2013 230 238
    • (2013) Compos Struct , vol.104 , pp. 230-238
    • Siddiqui, N.A.1    Khan, S.U.2    Kim, J.-K.3
  • 38
    • 77950519548 scopus 로고    scopus 로고
    • Partially cured epoxy/SWCNT thin films for reinforcement of vacuum-assisted resin-transfer-molded composites
    • L.Y. Sun, G.L. Warren, and H.-J. Sue Partially cured epoxy/SWCNT thin films for reinforcement of vacuum-assisted resin-transfer-molded composites Carbon 48 8 2010 2364 2367
    • (2010) Carbon , vol.48 , Issue.8 , pp. 2364-2367
    • Sun, L.Y.1    Warren, G.L.2    Sue, H.-J.3
  • 39
    • 84859837996 scopus 로고    scopus 로고
    • Encapsulation of self-healing materials by coelectrospinning, emulsion electrospinning, solution blowing and intercalation
    • S. Sinha-Ray, D.D. Pelot, Z.P. Zhou, A. Rahman, X.-F. Wu, and A.L. Yarin Encapsulation of self-healing materials by coelectrospinning, emulsion electrospinning, solution blowing and intercalation J Mater Chem 22 2012 9138 9146
    • (2012) J Mater Chem , vol.22 , pp. 9138-9146
    • Sinha-Ray, S.1    Pelot, D.D.2    Zhou, Z.P.3    Rahman, A.4    Wu, X.-F.5    Yarin, A.L.6
  • 40
    • 84877584014 scopus 로고    scopus 로고
    • Electrospinning core-shell nanofibers for interfacial toughening and self-healing of carbon-fiber/epoxy composites
    • X.F. Wu, A. Rahman, Z.P. Zhou, D.D. Pelot, S. Sinha-Ray, and B. Chen Electrospinning core-shell nanofibers for interfacial toughening and self-healing of carbon-fiber/epoxy composites J Appl Polym Sci 129 3 2012 1383 1393
    • (2012) J Appl Polym Sci , vol.129 , Issue.3 , pp. 1383-1393
    • Wu, X.F.1    Rahman, A.2    Zhou, Z.P.3    Pelot, D.D.4    Sinha-Ray, S.5    Chen, B.6
  • 41
    • 84865511655 scopus 로고    scopus 로고
    • Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibers
    • S.U. Khan, and J.-K. Kim Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibers Carbon 50 14 2012 5265 5277
    • (2012) Carbon , vol.50 , Issue.14 , pp. 5265-5277
    • Khan, S.U.1    Kim, J.-K.2
  • 42
    • 33847765713 scopus 로고    scopus 로고
    • Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength
    • J. Zhu, A.I. Imam, R. Crane, K. Lozano, V.N. Khabahsesku, and E.V. Barrera Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength Compos Sci Technol 67 7-8 2007 1509 1517
    • (2007) Compos Sci Technol , vol.67 , Issue.78 , pp. 1509-1517
    • Zhu, J.1    Imam, A.I.2    Crane, R.3    Lozano, K.4    Khabahsesku, V.N.5    Barrera, E.V.6
  • 44
    • 6344267010 scopus 로고    scopus 로고
    • Mechanical property characterization of a polymeric nanocomposite reinforced by graphitic nanofibers with reactive linkers
    • L.R. Xu, V. Bhamidipati, W.H. Zhong, J. Li, and C.M. Lukehart Mechanical property characterization of a polymeric nanocomposite reinforced by graphitic nanofibers with reactive linkers J Compos Mater 38 2004 1563 1582
    • (2004) J Compos Mater , vol.38 , pp. 1563-1582
    • Xu, L.R.1    Bhamidipati, V.2    Zhong, W.H.3    Li, J.4    Lukehart, C.M.5
  • 45
    • 77955425680 scopus 로고    scopus 로고
    • Role of processing on interlaminar shear strength enhancement of epoxy/glass fiber/multi-walled carbon nanotube hybrid composites
    • V.C.S. Chandrasekaran, S.G. Advani, and M.H. Santare Role of processing on interlaminar shear strength enhancement of epoxy/glass fiber/multi-walled carbon nanotube hybrid composites Carbon 48 13 2010 3692 3699
    • (2010) Carbon , vol.48 , Issue.13 , pp. 3692-3699
    • Chandrasekaran, V.C.S.1    Advani, S.G.2    Santare, M.H.3
  • 46
    • 22344446125 scopus 로고    scopus 로고
    • Mechanical and physical properties of epoxy composites reinforced by vapor grown carbon nanofibers
    • Y.-K. Choi, K. Sugimoto, S.M. Song, Y. Gotoh, Y. Ohkoshi, and M. Endo Mechanical and physical properties of epoxy composites reinforced by vapor grown carbon nanofibers Carbon 43 10 2005 2199 2208
    • (2005) Carbon , vol.43 , Issue.10 , pp. 2199-2208
    • Choi, Y.-K.1    Sugimoto, K.2    Song, S.M.3    Gotoh, Y.4    Ohkoshi, Y.5    Endo, M.6
  • 47
    • 19944393563 scopus 로고    scopus 로고
    • Characterization of orientation state of carbon nanotubes in shear flow
    • Z.H. Fan, and S.G. Advani Characterization of orientation state of carbon nanotubes in shear flow Polymer 46 14 2005 5232 5240
    • (2005) Polymer , vol.46 , Issue.14 , pp. 5232-5240
    • Fan, Z.H.1    Advani, S.G.2
  • 49
    • 0022810345 scopus 로고
    • On the analysis and design of the end notched flexure (ENF) specimen for mode II testing
    • L.A. Carlsson, J.W. Gillespie, and R.B. Pipes On the analysis and design of the end notched flexure (ENF) specimen for mode II testing J Compos Mater 20 6 1986 594 604
    • (1986) J Compos Mater , vol.20 , Issue.6 , pp. 594-604
    • Carlsson, L.A.1    Gillespie, J.W.2    Pipes, R.B.3
  • 50
    • 78649935252 scopus 로고    scopus 로고
    • An experimental study of interlaminar shear fracture toughness of a nanotube reinforced composite
    • D.C. Davis, and B.D. Whelan An experimental study of interlaminar shear fracture toughness of a nanotube reinforced composite Compos Part B - Eng 42 1 2011 105 116
    • (2011) Compos Part B - Eng , vol.42 , Issue.1 , pp. 105-116
    • Davis, D.C.1    Whelan, B.D.2
  • 51
    • 84856330875 scopus 로고    scopus 로고
    • RTM processing and electrical performance of carbon nanotube modified epoxy/fibre composites
    • E.F.R. Costa, A.A. Skordos, I.K. Partridge, and A. Rezai RTM processing and electrical performance of carbon nanotube modified epoxy/fibre composites Compos Part A - Appl Sci Manufact 43 4 2012 593 602
    • (2012) Compos Part A - Appl Sci Manufact , vol.43 , Issue.4 , pp. 593-602
    • Costa, E.F.R.1    Skordos, A.A.2    Partridge, I.K.3    Rezai, A.4
  • 52
    • 33748748196 scopus 로고    scopus 로고
    • Manufacturing carbon nanofibers toughened polyester/glass fiber composites using vacuum assisted resin transfer molding for enhancing the mode-I delamination resistance
    • R. Sadeghian, S. Gangireddy, B. Minaie, and K.-T. Hsiao Manufacturing carbon nanofibers toughened polyester/glass fiber composites using vacuum assisted resin transfer molding for enhancing the mode-I delamination resistance Compos Part A - Appl Sci Manufact 37 10 2006 1787 1795
    • (2006) Compos Part A - Appl Sci Manufact , vol.37 , Issue.10 , pp. 1787-1795
    • Sadeghian, R.1    Gangireddy, S.2    Minaie, B.3    Hsiao, K.-T.4
  • 53
    • 84864754983 scopus 로고    scopus 로고
    • Evaporation-induced, close-packed silica nanoparticle-embedded nonwoven composite separator membranes for high-voltage/high-rate lithium-ion batteries: Advantageous effect of highly percolated, electrolyte-philic microporous architecture
    • H.-S. Jeong, E.-S. Choi, S.-Y. Lee, and J.H. Kim Evaporation-induced, close-packed silica nanoparticle-embedded nonwoven composite separator membranes for high-voltage/high-rate lithium-ion batteries: advantageous effect of highly percolated, electrolyte-philic microporous architecture J Membr Sci 415 2012 513 519
    • (2012) J Membr Sci , vol.415 , pp. 513-519
    • Jeong, H.-S.1    Choi, E.-S.2    Lee, S.-Y.3    Kim, J.H.4
  • 54
    • 34147220590 scopus 로고    scopus 로고
    • Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites
    • E. Bekyarova, E.T. Thostenson, A. Yu, H. Kim, J. Gao, and J. Tang Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites Langmuir 23 7 2007 3970 3974
    • (2007) Langmuir , vol.23 , Issue.7 , pp. 3970-3974
    • Bekyarova, E.1    Thostenson, E.T.2    Yu, A.3    Kim, H.4    Gao, J.5    Tang, J.6


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.